Checking RAID and the Firmware update

Similar Questions

• Satellite Pro A200 error (PSAE4E) during the firmware update Disc Creator

  Hello

  I get the following errors when you try to update firmware for Disc Creator I use Windows VIsta Home Premium.

  An unexpected error has occurred.
  Error code: 32007C-26-00000015

  Followed by:
  Error code: 320129-26-00000015 - then application goes down.

  All solutions to this
  Thank you

  Hi guys

  I'm a bit confused of m.

  > when you try to update firmware for Disc Creator
  Where did you get the firmware update for Toshiba Disc Creator?

  I checked the page European driver Toshiba and Satellite Pro A200 (PSAE4E) download area and, unfortunately, I didn t find updates for Toshiba Disc Creator.

  So I really wonder about this problem. He s strange

• TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7

  After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.

  It was the update of the firmware with certainty that has made this... no doubt about it:

  • My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
  • Before the update, everything is OK
  • After updating, my mouse mouse start jittering
  • < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz

  Restart to e TM Mo doesn't change anything.

  In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.

  Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:

  • Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
  • However, this is not the best solution... I don't want 2 SSID.

  It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.

  I also had bad experiences with OS updates lately and postpone the as much as possible.

  The problem is that I can't go back... or can I?

  Any help is welcome.

  THX

  The problem is that I can't go back... or can I?

  Of course, you can, but it may or may not help.

  Open AirPort Utility

  Click on the image of the AirPort base station

  Hold down the option key on your Mac while you click on the version number of the firmware

  A drop down menu appears

  Choose the version of the firmware you want to use

• I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

  original title: game Fallout 3 on Windows 7 problem

  I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

  Hello

  You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

  Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

  You may need to contact the manufacturer of game for support

• Sansa Clip freezes at startup and on the firmware update

  After unplugging my video to my computer, it is hung on the screen "Connected".

  I forced a reset by pressing the power switch it 10 seconds

  He then restarted and hung on the Sansa screen

  I followed the instructions given in these forums in order to download the update of the firmware, mount the Clip in MSC mode and install the firmware.  Unplug the Clip, it hangs at "Update Firmware in progress" screen.

  I then re-mounted the Clip in MSC mode and deleted all the files of music and the update of the firmware.  After disconnection, he hooked again on the Sansa screen.  I then mounted in MSC mode and re-installed the update of the firmware.  He is now suspended again at the screen to update the firmware.

  Any suggestions would be greatly appreciated!

  The following procedure restored the Clip, but requires access to a Windows operating system:

  1. Tower Mounting Clip in MSC mode off camera (now switch is in position 10 sec If necessary 'on'). Set the switch to position 'Hold '. While pressing the "Select" Center, plug it into the USB port on a Windows computer. Wait for Windows to recognize the device before you release the "Select" button

  2. format of the Clip Double click on 'My Computer' to open a window of the Explorer. You should now see the video listed as a reader. Right click on the video player icon and select "Format". Select "FAT32". Do not check the box "quick format". Format the drive.

  3. Finish you can now disconnect the Clip of the computer and it should behave as a Clip of the new out-of-the-box. If you wish, you can download Sansa Updater software from the web site of Sansa (Sansa > support > Clip > downloadsansa Firmware Updater) and run it to install the latest version of the firmware on your device.

• Reference Dell T300 RAID 1 broken by the firmware update

  Hello

  We have a Dell T300 with the SAS 6/iR adapter.

  We have a RAID1 with 2 x 3 TB drives (visible only 2 TB).

  I have updated the firmware on the SAS adapter to the latest version available here:

  

  and now the RAID 1 has disappeared!

  We have a lot of important data on this virtual drive so any help would be appreciated.

  Thank you!

  Jerry.

  Hi Josh,.

  Thanks for getting back to me. The physical connections and the disks were good and they appeared in the update controller RAID configuration. But the virtual drive RAID1 had disappeared.

  I solved the problem by downgrading to an earlier version of the firmware.

  If I had read the README of the first firmware upgrade page completely, I would have noticed:

  The migration of the SAS 6/iR controllers PERC6 controller RAID Volumes is only supported for volumes created originally on 6/iR controllers SAS running review FW 00.25.47.00 or later version.

  I was able to locate a FW version 00.20.48 here.

  The executable flash.bat refused to downgrade the FW version

  However, looking at the .bat files, I could see that flash.bat called xflash.bat called sasflash.exe which is a LSI utility to upgrade the firmware of the card.

  I found an old manual with the arguments that sasflash.exe take here and use the switch - fwdown to wipe the card and firmware downgrade.

  When the server has started upward the virtual drive was back. Phew!

  Guess I'll read the Readme next time?

  Thank you for your attention,

  Jerry.

• Frozen opening control and shutter button after the firmware update.

  I've updated my sony nex 6 to the latest version of the firmware 1.01. After that, I noticed sometimes my camera froze. The opening is indicated as - and the shutter button does nothing. I have to remove the battery and put it back to make it work again. Sometimes with my zeiss lens and more often with my goal of 18200LE. Not sure how to work around this problem and what is the problem. I've reached a point of almost fed up with my camera. Need help!

  The exact model is SEL24F18 zeiss 24mm f1.8 on the latest firmware. Camera and the lens are on the latest firmware. Sometimes, the camera shows the f-stop and I have to remove and replace the battery to operate.

• Toshiba 40SL980G - the Youtube app after the firmware update.

  Hello

  So today, I've updated the firmware of my TV (40SL980G) and after the update of the youtube app is missing and also the social place of Toshiba places is not accessible.

  I did reset TV after the update.
  I checked the firmware download page, but this model is not which are listed there.

  Someone here could help me on how to solve this problem I would really appreciate it.

  They are probably going to change something in the places of Toshiba.

  If a new firmware update is available, try to install the latest version.
  Otherwise I recommend the service Toshiba Places in the next few days again.

• Roll back the firmware update

  Hello

  Is it possible to roll back the update of the firmware? I put on the Hebrew firmware 01.01.15 - I was wondering if I can take that off and put that ordinary English? Is it possible or do I just wait for the next firmware update and use English? I was told to look at the other posts here so that he can recognize the Hebrew he needs to UTF-16 encoding - but my s/w EasyTag for Linux can only do utf16 for id3v2 and the "rocket" uses only id3v1 correct?

  I am so frustrated with this.

  For a manual installation of firmware, simply unzip the compressed firmware file and place it in the root directory of the "rocket".

  When the rocket starts, it performs a check for a new firmware file in the root directory.  If you have placed the file in the root, it will automatically replace its current firmware with the one you have placed there.

  This can be done in MSC or MTP mode.  The only difference with MTP mode is that you first need to double-click on "Internal memory" to access the root durectory.

  Bob

• Can't connect to pass after the firmware update

  I have a power connect the 6224 switch which had everything set up and I accessing me it via the web gui for about a year now. I updated the firmware a few times before with no problems.

  Today, that I upgraded from 3.3.7.3 to 3.3.11.2. I did it using the following method:

  1. I downloaded the firmware using the web GUI

  2. I checked in versions on the web link, he was transferred from GUI

  3. I used the CLI to make it the active image and update the boot code (boot system image1, update bootcode)

  the switch rebooted and technically it's work but I can't access it using telnet or the web GUI. He seems to have forgotten then login and/or changed the password.

  What can I do to get there? I have another switch like this and am afraid now upgrade that I might lose access too.

  I would like to make a connection set for the switch. You should be able to access the CLI, check logging and execution of config, see if something has changed.

• CD burner Burns not... need the firmware update.

  I'm running Windows 7 on a Dell Inspiron 1440, my CD burner has stopped working. I successfully burned a CD today (with photos), but suddenly, it cannot burn any CD more and offers that I might need to update my "firmware". What can I do?

  CD players provided with the computer can / specialized ENGINE "firmwares" directly from the machine system.  Check the Dell website, if your computer is "classified" for Windows 7.  Then, check the availability of the firmware.

  If Dell not provided an update of the firmware and your computer is capable of running Windows 7 officially, you can be lock and the CD (DVD?) is "dead".

• OfficeJet pro l7780 wireless works do not since the firmware update

  Is there a restore utility for an update of the firmware?  I have updated the firmware on my Officejet pro L7780 AIO hoping to solve a problem of scanning; However wireless capability has since stopped working.  I tried a static ip address - disconnect the power supply, check that the SSID and password, etc..

  The wireless network Test report page. RADIO ON IS PASS, RADIO WORK = FAIL, PASS = NOT CONNECTED ETHERNET CABLE.

  The previous Firmware before I upgraded was: R0040xxNxeN0; The version of the installed software package now is: R2011NxNxeN0.

  The printer works with a straight ethernet cable to my router Netgear Rangemax Wireless model WPN824v2. However, it seems that I can only access the printer from my laptop through my desktop computer (which is networked via ethernet to the router) wireless - and the desktop computer must be powered.

  (PS; Update does not solve problem of scanning)

  Hello world

  I increased my support to management and after having crossed some tests additional etc, it was determined that my problem is, indeed, a hardware failure.  HP offered me a replacement refurb for $245 includes taxes & shipping in both directions, as I mentioned in my last thread, they don't sell parts for this model, that's why I decided the lesser of two evils... spend more money & buy new or take the offer... I take the offer.

  Thanks for your help.

  TinyJo

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• After 32RL933 the firmware update won't start no - green LED lights

  After an update of the firmware via wifi and use the TV for a few hours, when I changed the Source, the TV goes black and reboot, right now the TV is always black, green LED flashing and the screen turns black.

  I think it's a firmware issue, I tried to pull the plug and put back in operation and does not. I have donwloaded a rl933_748304.bin firmware on the site, loaded onto usb and plugged into the TV and does not work, so I think I need a "auto-install" firmware that runs at the start of the TV instead a normal firmware.

  I've read that a lot of people have this problem, I hope that you could give me support.

  Thanks in advance and sorry for my English.

  Try this:
  Turning the TV off. Wait 30 seconds, then press power button.
  Then OFF it again. Unplug the power cable and LAN cable.
  Reconnect the cable LAN and power ON the TV.
  Now reset the TV.
  GO to the system configuration menu, select TV point Reset and press OK to select.

• 8610 all-in-one printer: I can't download the firmware update to remove the dynamic security

  "For not original hp ink users an update of the firmware option to remove the dynamic security is now available for select Officejet, Officejet Pro printers Officejet ProX."

  I have bee patiently for the "fix".   Following the posted signs: http://support.hp.com/us-en/document/c05308850?openCLC=true

  Step 2) "click your HP printer model in the table below and run the file to update the firmware downloaded from your Internet browser."

  Seems to have no option to run the download of my Internet browser.

  I use Safari (and that's all I intend to help).  When I click on the download, I get an error message that says: there is no application to open the file. I tried to right click 'open with' - any of these options are internet browsers.

  Can you offer any help?

  Hello

  Option updte to remove the functionality of dynamic security listed in the document is only intended for a Windows PC.

  Download and install the update by using the following link for Mac OS:

  http://FTP.HP.com/pub/softlib/software13/printers/OJP8610_R1640B.dmg

  Kind regards

  Shlomi