Latency on Vista Ultimate laptop problems

Similar Questions

• Windows vista ultimate update problem

  so I'll try to upgrade windows vista ultimate SP1, and as he begins to run, I get an error of memory pointing me to

  http://go.Microsoft.com/fwlink/?LinkId=101139

  problem is when I go, it's a dead link.

  someone had this problem?

  That's what I get redirected to when I try your link - http://support.microsoft.com/kb/947366

• Satellite A200 - 1 GB: after upgrade to Vista Ultimate-> issues

  Hello

  I upgraded my Vista ultimate laptop, but I found a lot of problem:
  1 - the Fn + F1, F2,... no longer work.
  2 - get a blue screen,

  So I tried to do a clean install of vista ultimate, but I had no more problems!
  for example:
  "When you try to install the utilities equipment & password, I get a message" incorrect series.

  The media player shortcut key do not work
  If I install the toshiba value-added, the Fn + f1, f2... no longer work.
  In addition, no bluetouth software, no card Flash, no test available in the diag...
  and also, the BLUE SCREEN.

  I don't know if anyone can help me and thak you

  Baker

  Hello

  already made an update of the BIOS? It would be useful, maybe it s just because the BIOS does not correctly handle the Ultimate. What drivers did you download?

  It s a bit tricky, but I think that if you reinstall, and then put the drivers on it, it should work. Don't forget: Vista Ultimate needs a lot of resources and a bunch of useless stuff that can cause the machine does not properly.

  Welcome them

• Reinstall Windows Vista Ultimate version box, purchased at the retail store in a new machine

  I've upgraded from Windows XP came preinstalled as with my wife for Windows Vista Ultimate laptop bought in a store of retail as a boxed version. The motherboard of the laptop died recently and we intend to buy a new laptop without an operating system preinstalled. Is it possible to install Windows Vista Ultimate Edition of the product we have and turn on without any problem.

  "JOHN" wrote in message News: * e-mail address is removed from the privacy * .com...

  I've upgraded from Windows XP came preinstalled as with my wife for Windows Vista Ultimate laptop bought in a store of retail as a boxed version. The motherboard of the laptop died recently and we intend to buy a new laptop without an operating system preinstalled. Is it possible to install Windows Vista Ultimate Edition of the product we have and turn on without any problem.

  If the Vista Ultimate is a full retail product and then install it here.  You may need to use telephone activation, but this isn't a problem.
   
  If it is a Vista Ultimate upgrade version, you must have an operating system that is valid for upgrade and without a preinstalled OS or a license for the new computer "legally" impossible to install the upgrade version.
   
  XP OEM license for the old system died with the old system and cannot be used for the new computer as a qualifier for an upgrade.

• Startup and shut down problems on Sony VGN-AR51SU laptop with Vista Ultimate

  I have a Sony VGN-AR51SU laptop which has Vista Ultimate preloaded when it was purchased. The windows product key is noted on the underside of the computer.

  The computer is configured to close, either by closing the lid or will the icon start then shut down. I don't remember which option I used to shut down the computer.
  However when I press the power button the computer immediately emits three short beeps. The hard disk icon flashes as if it is starting, but the LCD display remains black and never even a blue screen comes. Devices powered by the computer the light upward.
  Eventuallu the hard drive icon will stop blinking.
  When I put the cover towards the bottom of the computer behaves as if it ends and all devices close but the power of the computer remains on, regardless whether I am with the main power or battery.
  Obviously I can not use the starting/closing track that I have a black screen.
  I tried all the options to remove lead AC and battery close and all devices, then re-boot just on AC power or battery or any combination of these options, etc etc etc and nothing makes a little difference.
  I keep my system and software updated and this problem was one of sudden nature IE. OK one day then the problem the next time I turned on the computer.
  Make three short beeps on start uo and the fact that the screen remains black gives a clue as to the problem?

  Hi Taked,

  This seems to be a hardware problem. You must contact Sony support for assistance on the issue.

  Contact Sony technical support

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=contact&SR=NAV:support:Electronics:contact_support:ESUP

• Dell Inspiron 1721 Win 7 ultimate upgrade on Vista ultimate. ATI Raid driver problems.

  I install Win 7 Ultimate on Windows Vista Ultimate Edition for my sister.  Although I am appalled by his duty to pay 200 more of the money it has paid to buy Vista Ultimate (for which she won Bitlocker and the possibility to join the areas, I have the following problem: she has a lot to gain a little and there are still problems in the installation of the OS.)  It would be good, at least, since it paid the price to have copies of the disks him were sent and more download (which I work with)

  I am trying to install the upgrade from 32-bit to Windows 7 on my laptop Dell Inspiron 1721 and I get an error that says I need to update my ATI AHCI Compatible RAID Driver. I went into the device drivers update as described in the instructions and tried to update the driver but it says I have the latest version of the driver for it. So I tried to restart my laptop and represented the upgrade installation and received the same error message.

  Can you advise me on how to solve the problem.  She has spent a lot of money and, at least, deserves to make it work!

  Hello

  You should check with the system manufacturer (Dell) and AMD/ATI possible as they write drivers.

  Dell support & drivers
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  AMD/ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Update problem with Vista Ultimate SP2

  I tried to install sp2 to Vista Ultimate twice, with the same results, he failed. The whole process took about 6 hours to complete. The second go round, I disabled my Norton 360 anti virus and turned to "silent". SP2 looked like, it had been installed with success, until I restarted the system. The pc then rebooted and was told that the upgrade was not successful and was recovering to its previous state.

  The upgrade works great on my laptop when I run "home premium". The upgrade of the laptop took less than an hour.

  No idea what is causing the problem, or do I just have to live with what I have?

  Hi Clocksnopper,

  Thank you for visiting the Microsoft Answers community forum.

  Clocksnopper, this problem may occur if any program on your computer interfered with the installation of the service pack, or if there is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  For more of this, you can try the steps present in the following article below:

  http://support.Microsoft.com/kb/947366

  Please let us know the results.

  Thank you.

• Have deleted Vista Ultimate power of a laptop off and downloaded on another larger laptop. will not be activated due to the use

  Have uninstalled vista Ultimate edition on a laptop at home and it downloaded onto a laptop larger home. Activation is refused on the ground that the product is already used on the first laptop. This is a single user license. But my IP address must be the same that I use two laptops on a router from apple.

  Be very much obliged if someone could kindly explain in simple terms I should do to fix the problem.

  Hello

  You don't say what kind of license of Windows you have.

  It depends on the type of license you have, as to whether you can transfer it or not.

  Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.

  OEM licenses are not transferable.

  If you have purchased your own license for sale retail of Windows and installed yourself, yes you can transfer it to another computer.

  Retail licenses are transferable.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Try activating by phone and wait for a real person answer if you can explain the situation to them.

  It is explained in this link.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Hard drive problems Windows Vista Ultimate Edition

  Well guys, that it left me speechless.  I recently inherited a laptop from a friend who is fairly new and in good condition.  The laptop, a Toshiba Techra A9, installed Windows Vista Ultimate.  The problem that I seem to have with the laptop is that it will start Windows in normal mode but gets up to a certain point and then hangs up.  I can hear the drive trying to be rolled up and continues to make a rattling noise, similar to a folder that jumps.  The funny thing is that I can turn the machine off and restart in SafeMode w / networking with no problems.  I tried a hard drive cool to think the problem could be a faulty drive, however, the new drive does the same thing.  I installed Vista via the Toshiba Recovery CD, and from the beginning for the first time Windows has frozen, the new hard drive making the same noise as the old.  Anyone out there have any ideas why this is happening?  Install a new hard drive and having the same problem son believe me that it is related Windows or I'll have another hardware problem elsewhere on the machine.  Thank you!!

  Try to check the drivers on the computer to the hard drive. If you can, go to the MMC Console in computer management, go to the Device Manager, and then in the console tree, you should see a line of 'hard drives. Down there, you should be able to see your hard drive. Right-click and click Properties, then go to the drivers of the popup window and note the driver version number. Check on the Toshiba site and see if there are updates to the hard disk driver. If there is, then install it. In addition, you can start safe mode and run your antivirus, assuming that he himself has not been compromised. It seems to be a software problem or driver since you say that you can start safe mode. Timothy

• Microsoft Office 2003 in Microsoft vista Ultimate icon display problem.

  Hello

  I have a computer laptop sony vaio with Windows Vista Ultimate Microsoft. I have connected to the external portable hard drive in Windows XP system as a hard drive. I got the backu. After that, I connected the hard drive of my laptop. then after Microsoft Office icons are not showing in correctly. its unknown icon of projection. but my office applications work properly. Can I recharge the icons as a same as before. I use office 2003.

  Can someone help me please.

  I don't know if it will work in these conditions, but you can try to rebuild the icon cache:http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.

  If it does not, go to Windows Explorer and check C:\Program Files\Microsoft\Office\ (at this point I don't know what he could tell - perhaps Office 11 or something like that - because I don't have any more than the desktop version and I forgot how the folder structure is named - but you want the folder containining (, all the program icons to start the Office programs) and see if the executable program icons have changed as well.  If not, right-click on each one and then click on create a shortcut (desktop) - do it twice, so you will have one for the office and another to replace the one that is not going to start (and how much more you need based on the number of shortcut icons that you have).  If the icons of the programs also display incorrectly.

  If it does not, then there is no specific functionality of Ofice 2003 (or later versions) to simply change the icons to their original forms.  Try the repair Office option in the:http://support.microsoft.com/kb/821593.  One of the options included (that can be verified) is to restore the desktop shortcuts and which can solve the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer daily and random stops with laptop Vista Ultimate

  I use a laptop Toshiba Qosmio with Vista Ultimate.  The machine stops completely randomly on its own and I have to restart - which can take up to four minutes - I get a message in an unexpected way, the machine closed and restarted in XXXX seconds.

  This morning I got Excel (2007) and Word (2007) open and use my webmail (work and personnel).   I use Internet Explorer.  It is quite frustrating and I don't know where to start to try at the source of how correct the problem or address.  The machine is not quite 3 years and Vista Ultimate came installed on the machine.  I installed the Service Packs 1 and 2 on the machine.  I'm also trying to determine if I should Windows 7 would avoid most of these stop random downs.

  I am open to your ideas and I appreciate your help - I'm not a computer wizzard, so dumb down for me.

  Amy

  Hello

  Use the sections "BOLD" here to gather information.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that causes the
  Crash.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Should I install Vista Ultimate on all computers laptops before moving on to a 3 Windows 7 license three?

  I'm considering the purchase of three laptops for home use and the case I've seen is for three laptops without operating system. I prefer Windows 7 64 - bit Windows 8 and, of course, need a license of user-3. I don't mind if it's Home Basic, Home Premium, professional or ultimate edition, but an 'Upgrade' will work and if not, what would? I have a spare disk Vista Ultimate, which I have not used more than once when I tried the upgrade to XP and didn't like it, so I went back to XP (present under Windows 7 Ultimate for my main PC) Vista has been in the area since then. I hope I did not install Vista Ultimate on all computers laptops before moving on to 3 Windows 7 license, three but I have a feeling vague feeling that I have to do exactly this. You confirm please?

  Original title: clean install on the new laptop

  Just keep in mind that the OEM versions are equipped with the installation media DVD 32-bit or 64-bit (not both as a retail version) and a product key.

  Also the OEM versions are related to the first card of mother/computer it is installed on and cannot be moved to another PC.

  The cost of an OEM version is much cheaper than commercial versions, especially since Microsoft stopped selling Windows 7.

  Amazon: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dsoftware&field-keywords=Windows+7

  As laptops have no OS installed, you need a way to test the system before you try to install an OEM version. I've provided two links to download Windows 7 Home premium (not), but you can install (install without a key) and it allows to test each laptop computer before installing an OEM version.

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  SHA1 hash: 6071B4553FCF0EA53D589A846B5AE76743DD68FC
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
  SHA1 hash: 6C9058389C1E2E5122B7C933275F963EDF1C07B9

  (1) after downloading the correct .iso file install HashCalc and validate the SHA1 hash value
  is correct. If the download is not corrupted, the value HashCalc returns will be the value of SHA1 I posted.
  HashCalc: http://www.slavasoft.com/hashcalc/index.htm

  (2) then use ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows

  During this 30-day grace period you can try to solve your problems. 
  After you are satisfied with all the problems have been resolved and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the graphics card or in your case download site of the manufacturer of the laptop for the latest Windows 7 drivers for your card.

  J W Stuart: http://www.pagestart.com

• Problem of camera Chicony after Vista Ultimate upgrade on the Satellite A200 - 1CZ PSAEC

  Hey all.

  I recently bought a Satellite A200-1CZ (PSAEC). It has Vista Home Premium preinstalled. But I wanted to be able to connect to my domain at work, so for this purpose, I had to upgrade to Vista Ultimate. The update itself went well, but after the upgrade, I can not the built-in Chicony webcam to work again. I tried to reinstall the software of the camera without success.

  I also tried to plug the driver installation to the place on the PC where the drivers. He says that it is indeed the correct drivers, but there could be missing a post in the INF file. It seems that it must be written specifically for ultimate.

  Anyone got a few other pilots or maybe a solution to this problem?

  -Dan

  Hi Dan

  Please don't be angry with me, but why you n t search here in the forum first?
  Advanced forum search is the option to find related discussions this topic.

  I found this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  Also, here is the solution to your problem
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

  Greetings

• message, macromedia projector has stopped working on vista ultimate, never had a problem in the past. I tried tons of solutions that nothing works.

  Macromedia projector has stopped working, get this message when I try to play or install bigfish games. never had a problem, the recent past is only.
  my pc is vista ultimate
  tried several solutions, none works, very upset and frustrated

  Hi scooby65,

  Thank you for using the Microsoft Answers forums.
  a. do you receive any error messages?
  b. did you change to your computer recently?
   
  Try to temporarily disable all security software and check if it helps.

  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Also perform the following steps.
   
  Try these steps and check if this helped:
   
  1 left-click on start
  2 - right click on computer
  3. left-click on properties
  4 - left click on advanced system settings
  5 - running, click settings
  6. left click on the parameters of Performance data
  7 - click TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
  8. click on apply and then OK.
   
  Alternatively, you can try to install in clean boot mode and check if that helps.
   
  Steps to start in clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Alternatively, you can try to uninstall and reinstall adobe flash player and check.

  For more information, visit the links below:
  http://kb2.Adobe.com/CPS/141/tn_14157.html
  http://kb2.Adobe.com/CPS/191/tn_19166.html  
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?

  When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?

  KiranS Hello,

  Judging by your post, it seems that Microsoft had technical problems when you tried to activate your copy of Vista by phone. Have you tried phoning the line Activation again?

  The normal procedure is that if the activation fails through the automated system, the call is transferred to a real person. It is the only available option if you get the error 'use existing product key'.

  I can only suggest that you try again the activation by phone and see what happens.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com