Equium A210 - after update BIOS problems connect to MSN Live Messenger

Similar Questions

• Problem connecting to windows live messenger

  Hi can someone help me out here...

  I get the error Code: 8e5e0158 when you try to connect to Windows Live Messenger.

  Is there a solution for this?

  Hi can someone help me out here...

  I get the error Code: 8e5e0158 when you try to connect to Windows Live Messenger.

  Is there a solution for this?

  Please repost in Windows Live Solution Center, son of messenger section:
  http://windowslivehelp.com/forums.aspx?ProductID=2 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Startup after update BIOS problems

  I recently updated my Alienware Aurora R4 for Windows 10, that satisfies me, but I noticed that my fans have been reallt strong during startup and shutdown, and I had to reset manually in my Alienware Command Center application which caused irritation, so after minimal research, I saw that one of the proposed fixed has been update BIOS I foolishly thought would be a quick easy thing to try, so I updated the BIOS version A7 to A11 day because I was not aware of the flashing, which I realize now, I should certainly have done. In any case, the update seems to work fine, no freezes or crashes and I just restarted my computer and stop was normal. When he started upward again if, instead of start properly, he showed a 10 windows screen that says: "your computer encountered a problem and needs to restart" with an error that says INACCESSIBLE_BOOT_DEVICE. When it has rebooted, I went into my BIOS settings and that he made sure that my the first boot device has been "hard drive" (I have two discs SSD, a HARD drive, but they have never caused me problems before and nothing has been fixed when I took out the HARD drive without windows on it). So far, I restarted a bunch of times and tried everything I can think of. Any help would be appreciated! Thank you

  simple tips I gave to a member of the forum the other day (it is possible that the bios update is back your settings to "default"):

  • Check your bios, game sata AHCI controller
  • set the boot device as HDD #1
  • others had the chance in the bios, go to 'legacy boot.
  • remove all external usb devices for now accept keyboard and mouse back.

  Dell/Alienware advice says to disable secure boot...

• Problems connecting to Windows Live Messenger 2011

  Hello

  I was wondering if someone can help me with this request.

  I downloaded the new Windows Live Messenger 2011, but I get this error message whenever I'm trying to connect.

  "Windows Live Messenger has stopped working. A problem caused the blocking of the program works correctly.

  Windows will close the program & warn you if a solution is available. »

  I try to uninstall & reinstall the program a few times but this error keeps coming back.

  What should I do?

  I thought back to the old version.

  It is likely?

  And how this is related to Windows Update?

  You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pomp A210 - after update BIOS it ask me a pass

  I am using Toshiba Satellite A210, I download the update to version V.0.02 (Version 1.0.2.2) phoenix BIOS from here
  http://EU.computers.Toshiba-Europe.com/innovation/download_bios.jsp?service=EU

  I would Setup after installing restarted my laptop and it ask me to PASS on BIOS

  Can someone HELP me with this thing?

  Hello

  What do you mean with pass?
  Do you mean a password?

  If so, do you have a BIOS password? You may have forgotten it.
  A BIOS password can only be removed from an ASP. I think the best way is to contact the ASP and ask for help.

  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• Problems connecting to Windows Live Messenger

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I would like to know why you cannot use or sign the Messenger of the window?

  • * original title - I wonder to know why couldn't use life window messenger? Why reject me always when start singing? *

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I would like to know why you cannot use or sign the Messenger of the window?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey ti I need to know about the problem of the EPK window

  It comes to the installation of vista operating system instance

  Please repost the link for help with your problem of messenger below in the Messenger forums

  http://www.windowslivehelp.com/product.aspx?ProductID=2

  Walter, the time zone traveller

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• I can't get connected to Windows Live Messenger.__Everytime I connect happens __Can "Windows Live Messenger has stopped working, a problem caused the program to close down" help please

  I can not get connected to Windows Live Messenger.
  Whenever I connect it comes up "Windows Live Messenger has stopped working, a problem caused the program to close down."
  Can you help me please

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems connecting to the live stream

  Hello

  I use FMS for a few weeks and feel relatively comfortable with it, but is currently experiencing some problems connecting to a live stream in a a video conference-type application.

  I suspect I'm leaving a few small not to outgoing not, but cannot see what is this step.

  I have a client application open the video camera, connect to the FMS and publish his feed live camera on the server. Something like this:

  Connect to FMS

  NC. Connect ("rtmp: / / < ip addr > 9/chat_test /" "");

  In my (successful) connection manager:

  cam = Camera.getCamera ();

  cam.addEventListener (StatusEvent.STATUS, statusHandler);

  ...

  ns = new NetStream (nc);

  ns.client = new CustomClient();

  ns.addEventListener (NetStatusEvent.NET_STATUS, onNetStatus);

  ns.addEventListener (AsyncErrorEvent.ASYNC_ERROR, onAsyncError);

  ns.attachCamera (cam);

  ns.attachAudio (mic);

  ns.publish ("user1");

  It should publish the feed live called 'user1' on my FMS instance. Indeed, using the administration console indicates that this connection has been established, and a 'Live' stream exists with the name "user1".

  My problem is when I try to open in this workflow with a second client:

  NC. Connect ("rtmp: / / < ip addr > 9/chat_test /" "");

  remoteStream = new NetStream (nc);

  remoteStream.client = new CustomClient();

  remoteStream.addEventListener (NetStatusEvent.NET_STATUS, onNetStatus);

  remoteStream.addEventListener (AsyncErrorEvent.ASYNC_ERROR, onAsyncError);

  vidPlayer = new Video (cam.width, cam.height);

  vidPlayer.attachNetStream ("remoteStream");

  remoteStream.play ("User1", 0);

  addChild (vidPlayer);

  However, I get the errors "NetStream.Play.StreamNotFound". It seems relatively simple, but it clearly a small not miss somewhere. Maybe a second pair of eyes can help me find my problem?

  Thank you.

  Replace

  remoteStream.play ("User1", 0);

  by

  remoteStream.play ("user1");

  the second parameter of play() is start time with the default value of-2. Zero means play a VOD from the beginning.

  See the documentation of FMS for details and the list of valid values.

• Cannot connect to windows live messenger, error is could not close program when you try to download the new version of windows live messenger

  When you try to connect to windows live messenger, I have error message a new version of messenger is available for download. When I select Yes, wat happens in it will not download new version of windows live messenger but it says could not close the programs. Please help me again

  Hello

  Method 1.
  Here's how you can solve this problem:

  a. download the latest version of Windows Live Messenger available onhttp://explore.live.com/windows-live-Messenger-XP

  b. update of Windows XP through Windows Update.

  c. go to "C:\Program Files\Windows Live" and remove the 'Messenger' folder (Note: replace 'C' with your root drive letter)

  d. go to "C:\programdata" (Note: replace 'C' with your root drive letter) and remove Windows Live install and WLInstaller, if you have a

  e. restart the PC.

  f. run the installation program that you downloaded.

  Method 2.
  If the problem persists I recommend you ask your question on the dedicated Windows Live forums.

  Here is the link to the Windows Live Messenger category.
  http://windowslivehelp.com/forums.aspx?ProductID=2

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't connect to windows live messenger, error code 80080005

  Problems to connect to windows live messenger, error code 80080005

  Hi christine63,

  In dealing with the problem with Windows Live Messenger, I recommend you post your question in Windows Live Solution Center for assistance.

  Portal Messenger

  Hope the helps of information.