Child panel - how to put it to a specific location in the Parent Panel
Hello I have a program with main panel what other signs in the form of tabs.
I need to put the child Panel on the tab panels.
How can I do this and get a good view of the child Panel only
on the right panel?
I'm attaching an image to describe.
Thank you for your comments
Meir
Hey Meir,
It seems to me you're missinig a very basic concept on the tab control: each tab IS actually a child Panel! In other words, all of the controls that you have on your test panel can be simply loaded on the desired tab, leaving the other unchanged pages.
You may be missing the scroll bar on the right, which actually isn't is not present on the controls tab, but as far as I can see your interface might be reduced to a single table control placed on a page of tabs with appropriate row headers and colunm.
In all cases, if you do not strongly want to change your existing code you can use the command (InsertPanelAsTabPage) to add a panel you have previously loaded to the tab control: in this case a current scroll bar is maintained. Keep in mind that this statement actually makes a copy of the original Panel, you need to retrieve the handle of the appropriate tab of address on the page adding control. The original panel can be thrown immediately after it is added to the tab control.
Tags: NI Software
Similar Questions
-
How to put two images in an image on the windows photo gallery
I need to know how to put two images in an image on the windows photo gallery.
I need to know how to put two images in an image on the windows photo gallery.
=================================
If you say you want to join two images
edge to edge that's easy to do with the free-
Ware IrfanView.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)IrfanView and IrfanView plugins
http://www.download.HR/download-IrfanView.htmlOnce you have downloaded IrfanView and
installed... Open the program and go to...... Image / create the Image of the Panorama...
Make your choice and click on the button create an Image.
When you see the combined images displayed
in the display... go to... File / save as...Choose a location...
Choose a format...
Give the file a new name...
Click on... Save...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
How we prevent external swf click do not affect the parent swf
I use the loadMovie command to load an external swf (a short course of education) in the parent swf file. The parent swf file is an interactive exercise with several buttons to answer. The user can click a button to open and close the turorial on top of the exercise.
If the user clicks at random on the tutorial, they can accidentally click the answer buttons in the swf below parent and hear signals correct and incorrect. When they close the tutorial, they see that the answers have been given and it has a score when they have not intentionally give all the answers.
How to prevent clicks on the external register on the parent SWF swf? Thanks in advance for any help on this matter.
Add a rectangle step in the lowest layer of your external swf and make sure that the size of the stage of the loaded swf file and load is the same. convert this shape to a movieclip and assign an instance name (for example, bg_mc). in Control Panel, you can use:
bg_mc._alpha = 0;
{bg_mc.onRelease = Function ()}
}
bg_mc.useHandCursor = false;
-
How to put 2 different forms of wave with the timestamp on a chart
Hello
I'm putting the 2 waveforms with different stamps on the same chart.
I'm able to do that if I post my data in my chart once.
When I write to my chart several times, the new data replaces old data, instead of concatenation to the old data.
See the vi attached for what I'm trying to do.
Can anyone suggest how to do this correctly?
Thank you.
-Matt
It works. It's your data. Put a longer wait statement in the loop and watch.
You create 1/10 seconds of data in each simulated waveform. You have a millisecond 33 wait between your 2 simulations. The loop For will run super fast with only this 33 msec waiting that is less than 1/10th of a second. Then of course some data will overwrite old data.
Change your Simulations for "Simulate Acquisition Timing" rather than "Run as fast as Possible" which will slow down the loop and make it more realistic timetable.
-
How to put a WIFI-connect button directly on the home screen?
Hi all
I know there is a wifi - connect button in the notification Panel, but I have to turn on my screen, open the Control Panel, then click on the "quick settings" button, then click on the WiFi connect button... " 4 actions connect within my own wifi network!
(Note that I don't want the automatic connection setting because I don't want to be connected to each time)
I wish I had just a "wifi - connect ' on my screen which allow me to connect just by clicking this button."
I can't find a widget or application in my phone to do this.Do you know how?
Thank you very much
GuyHello
The best thing would be to follow the advice of dandy63of s, by downloading a third-party application that can handle it. The closest you can get this as standard (without having to download any third-party application), would be to add a shortcut to settings > Wi - Fi. This can be if you long press on an empty space on your home screen > select Apps > shortcuts > settings > Wi - Fi.
-
How to put a file jpg or png as the background of a page
I tried to use ImagePaintDefinition to set the background of a container and added that the container on the page. But does not work. It must also have dimension photo as a power of 2. Is there some way I can put guess 768 X 1280 image dimensions as my background? Thank you.
It seems that there is nothing in the container and because you have not set a width and a height, the size of the container is equal to zero.
-
Hello
I had done in the past but can't remember how. Has anyone done so the e-mail can be more significant with the date.
Thank you
Amit
Never mind, figured it out. Just so that everyone knows, it was obtained using program generator.
-
I imported a large number of clips in numerical order from lowest to highest. Today when I opened the first the order was reversed in the list view of the highest to the lowest number. I do not know why. I didn't change anything. He did this to all my other tanks too!
When I Watch clips in the icon view that they are in good condition!
So now when I try to put on the timeline it up my latest music video first. Is there an easy way to reverse the order in the list view to the way in which I initially imported? I don't want to have to import all the clips.
Thank you!!
Have you tried clicking on the column header?
(Open a folder and go under the headings at the top of the trash... click on the file name column header)
-
How to put a table as parameter name in the name of the cursor and the header as a variable?
Hello
I have the code:
and I don't know how to create the slider:create or replace procedure transpose_table_row2column(table_source IN VARCHAR2 ,table_result IN VARCHAR2) is -- set serveroutput on; v_nazwa_kamp varchar2(100); v_czas_start date; v_czas_stop date; err_code varchar2(50); err_msg varchar2(2000); cmd_1_drop varchar2(50); cnt_1 pls_integer; cnt_2 pls_integer; cnt_3 pls_integer; cnt_4 pls_integer; v_col_name varchar2(50); test varchar2(5); -- deklaracja wyjatku dla nieistniejacej lub niedostepnej tabeli TableDoesNotExist EXCEPTION; PRAGMA EXCEPTION_INIT(TableDoesNotExist, -942); -- nazwa pierwszej kolumny tabeli zrodlowej cursor first_column is SELECT column_name FROM USER_TAB_COLUMNS WHERE TABLE_NAME = upper(table_source) and column_id = 1; -- wartosci z pierwszej kolumny tabeli zrodlowej cursor first_col_data_header is select v_col_name from table_source; begin test := 'true'; v_nazwa_kamp := 'transpose_table_row2column'; v_czas_start := sysdate; -- sprawdzenie czy istnieje tabela zrodlowa BEGIN EXECUTE IMMEDIATE 'SELECT count(*) FROM ' || table_source INTO cnt_4; EXCEPTION WHEN TableDoesNotExist THEN test := 'false'; err_code := SQLCODE; err_msg := substr(SQLERRM, 1, 2000); INSERT INTO log_errors (time_err, object_name, campaign_name, error_number, error_message) VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg); COMMIT; WHEN NO_DATA_FOUND THEN test := 'false'; err_code := SQLCODE; err_msg := substr(SQLERRM, 1, 2000); INSERT INTO log_errors (time_err, object_name, campaign_name, error_number, error_message) VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg); COMMIT; WHEN OTHERS THEN test := 'false'; err_code := SQLCODE; err_msg := substr(SQLERRM, 1, 2000); INSERT INTO log_errors (time_err, object_name, campaign_name, error_number, error_message) VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg); COMMIT; END; -- jesli istnieje tabela zrodlowa to przetwarzamy if test = 'true' then -- pobieram nazwe pierwszej kolumny tabeli zrodlowej for v_first_column in first_column loop v_col_name := v_first_column.column_name; end loop; -- sprawdzenie czy istnieje tabela docelowa, jesli tak to trzeba usunac select count(*) into cnt_1 from user_tables t where t.table_name = upper(table_result); -- jesli istnieje tabela docelowa to usuwamy if cnt_1 > 0 then cmd_1_drop := 'DROP TABLE ' || table_result; execute immediate cmd_1_drop; end if; -- pobranie liczby wierszy tabeli zrodlowej - nalezy stworzyc tyle samo kolumn w tabeli docelowej -- ponizej sprawdzenie czy w pierwszej kolumnie tabeli zrodlowej sa unikalne wartosci - jesli nie to nie mozna -- transponowac tabeli poniewaz musi ona miec te wartosci jako naglowki nowej tabeli i musza wystepowac one tylko 1 raz execute immediate 'select count(' || v_col_name || ') from ' || table_source into cnt_2; execute immediate 'select count(distinct ' || v_col_name || ') from ' || table_source into cnt_3; -- jesli wartosci w 1 kolumnie sa unikalne to przetwarzamy dalej if cnt_2 = cnt_3 then -- tutaj rozpoczynamy odczytywanie tabeli zrodlowej i tworzenie nowej przetransponowanej tabeli for v_first_col_data_header in first_col_data_header loop DBMS_OUTPUT.PUT_LINE(': ' || v_first_col_data_header.v_col_name); end loop; v_czas_stop:= sysdate; insert into log_campaigns (campaign_name, time_start, time_stop, records_count, time_diff_min) values (v_nazwa_kamp, v_czas_start, v_czas_stop, cnt_2, round((v_czas_stop - v_czas_start) * 24 * 60, 2)); commit; end if; end if; EXCEPTION WHEN OTHERS THEN err_code := SQLCODE; err_msg := substr(SQLERRM, 1, 2000); INSERT INTO log_errors (time_err, object_name, campaign_name, error_number, error_message) VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg); COMMIT; end transpose_table_row2column;
I have error this table does not existcursor first_col_data_header is select v_col_name from table_source;
because table_name is the name of the parameter and v_col_name is variable which I initialize later in the code:
Thanks for helpfor v_first_column in first_column loop v_col_name := v_first_column.column_name; end loop;
Here is the code you are looking for:
create or replace procedure transpose_table_row2column (table_source IN VARCHAR2, table_result IN VARCHAR2) is
-set serveroutput on;
v_nazwa_kamp varchar2 (100);
date of v_czas_start;
date of v_czas_stop;
err_code varchar2 (50);
err_msg varchar2 (2000);cmd_1_drop varchar2 (50);
cnt_1 pls_integer;
cnt_2 pls_integer;
cnt_3 pls_integer;
cnt_4 pls_integer;
v_col_name varchar2 (50);
test varchar2 (5);-deklaracja wyjatku dla nieistniejacej lub niedostepnej tabeli
TableDoesNotExist EXCEPTION;
PRAGMA EXCEPTION_INIT (TableDoesNotExist,-942);-name pierwszej kolumny tabeli zrodlowej
l_first_column varchar2 (32767): = 'SELECT column_name FROM USER_TAB_COLUMNS WHERE TABLE_NAME = upper(:table_source) and column_id = 1';-z pierwszej kolumny tabeli zrodlowej wartosci
l_first_col_data_header varchar2 (32767).
first_col_data_header sys_refcursor;
l_first_col_data varchar2 (32767).Start
test: = "true";
v_nazwa_kamp: = 'transpose_table_row2column ';
v_czas_start: = sysdate;-sprawdzenie czy istnieje image zrodlowa
BEGIN
EXECUTE IMMEDIATE ' SELECT count (*) FROM "| table_source INTO cnt_4;
EXCEPTION
WHEN TableDoesNotExist
THEN
test: = "false";
err_code: = SQLCODE;
err_msg: = substr (SQLERRM, 1, 2000);
INSERT INTO log_errors (campaign_name, time_err, object_name, error_message, error_number)
VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
COMMIT;WHEN NO_DATA_FOUND
THEN
test: = "false";
err_code: = SQLCODE;
err_msg: = substr (SQLERRM, 1, 2000);
INSERT INTO log_errors (campaign_name, time_err, object_name, error_message, error_number)
VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
COMMIT;WHILE OTHERS
THEN
test: = "false";
err_code: = SQLCODE;
err_msg: = substr (SQLERRM, 1, 2000);
INSERT INTO log_errors (campaign_name, time_err, object_name, error_message, error_number)
VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
COMMIT;END;
-jesli istnieje image zrodlowa at przetwarzamy
If test = "true", then-pobieram nazwe pierwszej kolumny tabeli zrodlowej
run immediately l_first_column in v_col_name using table_source;-sprawdzenie czy istnieje image docelowa, tak jesli to trzeba usunac
Select count (*) in the user_tables cnt_1 t
where t.table_name = upper (table_result);-jesli istnieje image docelowa at usuwamy
If cnt_1 > 0 then
cmd_1_drop: = 'DROP TABLE ' | table_result;
immediately run cmd_1_drop;
end if;-pobranie liczby wierszy tabeli zrodlowej - nalezy stworzyc tyle samo kolumn tabeli w docelowej
-czy sprawdzenie ponizej w pierwszej kolumnie zrodlowej his unikalne wartosci tabeli - jesli nie to nie mozna
-transponowac tabeli poniewaz musi ona IMCs you wartosci tabeli nowej naglowki jako I musza wystepowac a tylko 1 raz
run immediately "select count (' |)" v_col_name | ') de ' || table_source in cnt_2;
run immediately "select count (distinct ' |)" v_col_name | ') de ' || table_source in cnt_3;-jesli wartosci w 1 kolumnie his unikalne to przetwarzamy dalej
If cnt_2 = cnt_3 then-tutaj rozpoczynamy tabeli zrodlowej odczytywanie I create nowej przetransponowanej tabeli
l_first_col_data_header: = 'choose ' | v_col_name | 'from ' | table_source;
Open the first_col_data_header for l_first_col_data_header;
loop
extract the first_col_data_header in l_first_col_data;
When the output first_col_data_header % notfound;
DBMS_OUTPUT. Put_line (': ' | l_first_col_data);
end loop;v_czas_stop: = sysdate;
insert into log_campaigns (campaign_name time_start time_stop, records_count, time_diff_min)
values (v_nazwa_kamp, v_czas_start, v_czas_stop, cnt_2, round ((v_czas_stop-v_czas_start) * 24 * 60, 2));
commit;end if;
end if;EXCEPTION
WHILE OTHERS THEN
err_code: = SQLCODE;
err_msg: = substr (SQLERRM, 1, 2000);INSERT INTO log_errors (campaign_name, time_err, object_name, error_message, error_number)
VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
COMMIT;end transpose_table_row2column;
-
How to put in pause/playback my project when the user clicks?
Hi all
I'm working on a project using Cp4.
My project plays automatically without user intervention.
I need project to be suspended when the user clicks a clickbox running.
I can break the project by adding a clickbox and applying the property ' to pause project until user clicks on.»
But it must be a user interaction whether to pause or play.
I use playback controls by hiding all the options to control playback bar red break and play option, but I need to pause the button inside the project.
I dnt want to display playback controls by using the Table of contents.
__________________________________________________________________
I could find this content at http://help.adobe.com/en_US/Captivate/4.0/Using/WSCB934979-86BE-40d2-8BB8-A66956575988.htm l #WS8898B608-FC25-4439-BABC-3AD722144202
In this page, it clearly says that we can break the project if we set the value of the variable 'rdcmndPause' to 1.
In this page, it clearly says that we can play the project on hold if we set the value of the variable 'rdcmndResume' to 1.But I applied the same values for these variables and tried to control my project its does not work.
Kind regards
Kartik.P
Hello
Maybe the link below will help?
See you soon... Rick
Useful and practical links
Begin to learn Captivate 5 times now! $29.95
Captivate wish form/Bug report form
-
How do I whitelist a specific application in the parental control?
I have implemented the game Restrictions for two kids (9 & 13) based on the ESRB game ratings. I want to filter so that my child of 9 years old can play: E10 + and my 13 year old can play T.
There's a game I've played that my children would like to play as well, but the game has a higher rating due to some cartoonish violence. (In this case, you play a shark that can eat divers and swimmers).
Is there a way for me to retain the Restriction of game based on the side, but allow/whitelist this specific app?
Hi Novac,
Thanks for posting your query on the Microsoft Communities.
I'm sorry to know that you have problems, which allows an application in parental control. Let me try and help you with this question.
What operating system do you use?
You can follow this thread and see the advice given by "Trung Nguyen N" to allow apps/games you want in the game restrictions section.
http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-security/family-safety-doesn
Hope this helps to solve the problem. If you have any other questions, we will be happy to help you.
-
1013 JDev how 2 display number on a specific attribute on the output text table?
Page 1: I created a form of parameter with 7 top search criteria fields and table of results of search or a Table read-only ADF downstairs. The setting is based on the application of top link where each parameter is as the corresponding field in a table and works very well!
For Page 2: I want the page looking at the same research, same parameter table of search results albums and even down with the addition of display also count on a particular area so that when someone enters data into the fields of setting up, he would always check the table and show the results of all fields, but in the last column do a count on this field (totally separate from the default number of records to search entire JDEV).
Is it possible to create as a count or count (*) function at the level of the line of text out? I tried to create a view based on a Select sql statement a, b, c, d, count (e) table, group by a, b, c, d, e and when I dragg this object that contains this sql statement from the data control panel, it gives me the correct regulation of all areas, including the last column to display the number of records for this field , but together does never change based on what has been entered in the parameter, it is as if he is not yet connected to it. For ex: I want to display the number of all students within the setting of the East region, on the contrary it shows total number for all regions, not specific to East.Hello:
I worked on a very simple application form ADF search against table Scott.emp in the Oracle database.
Now I see what you mean. The idea is probably you shouldn't directly drag and drop control of your data: directly in your jspx as «ADF search form» Here are the steps:
(1) create your entity object, the view object and I'm in the model layer; (You have already done this, you do not have entity and your view may come of TopLink request;)
2) double-click the View object in your project of "model"; Add a connection variable: type Bind_deptno Number. It's read in a number of dept on the search engine;
(3) change the SQL statement of the Emp View object on the same place as 2); WHERE Emp.Deptno = NVL (: Bind_deptno, Emp.Deptno) this indicates ADF if the binding variable is bound to a value
then use this value, or if it is null, just ignore it. That's the tricky part;
(4) create a new JSF called "Search.jsp', which will be the search engine;
(5) from App Module, select EmpView1 (EmpView is updatable, EmpView1 is read-only, but it is not serious on the research plan), drag and drop the EmpView1 on your
Search.jsp as an array of the ADF (not a search ADF form). This ADF table then displays the result of the research;
(6) of the control Module of the App, go to EmpView1 data, drag and drop a "ExecuteWithParams" on your search engine like settings-> parameter ADF
Form, this will tell ADF you want to set the variable binding as an executable looking for shape parameter.
That's all! and you're good to go. Do the same for the other variable binding (you have 7 search criteria, so you have set 7 bind variable by using the same logic here.
Good luck and don't forget to mark my answer as "correct" it to make me a few partitions.Best regards
Alex IBE -
How to find modules using a specific table in the designer 10 g?
Hi, we are in a conversion traject of Designer 6.0 to Designer 10 g with patches 10.1.2.5 group.
Apart from a conversion problem for which we got a work around (see bug number 8453702) everything looks okay now.
But with the trial run, I found something strange:
-in Des10g, when you look at the uses of a table, you do not see the part "Used in the Module components" more. It's pretty boring. Now, I found a way to show something with the help of the matrix diagrammer, but I'm not very happy with it.
My questions:
-How is it changed? and
There has another way to quickly view these uses, or are we stuck with it?
Best regards, Paul.Hello
Move the repository object browser. Go to table definitions--> uses--> used in sets of sql queries
Best regards Erik -
How do I enroll in a new location with the same email address
I have registered in the UNITED Arab Emirates, but am now in England and cannot make a purchase online
Contact technical support by phone or web chat.
Mylenium
-
How can I open to a specific page or the destination of a PDF using Buddy API Xtra?
Hello
I work with a CD ROM catalog that uses the Buddy API Xtra to open PDF files when the user clicks on a link. The customer wants to be able to open to a specific page in a pdf file.
I can open a pdf file using the baOpenfile() Buddy API function, but I'm unable to open to a specific page when I add #page = 4:
baOpenfile("@\pdfs\Powder Cores\Magnetics_Powder_Core_Catalog_2011.pdf#page=4","normal")
I also tried to work with the code below, which seems to me it should work... I did not know that the game "open..." "it was a function of Director.
on mouseUp me pageNum = 4 theApp = baShortFileName(baFindApp("pdf")) theDoc = baShortFileName("@\pdfs\Powder Cores\Magnetics_Powder_Core_Catalog_2011.pdf") theArgs = "/s /A page=" & string(pageNum) & "&pagemode=bookmarks" -- (translates to "/A page=4" in this example) open theApp && theArgs && theDoc end
Thoughts?
Thank you in advance!
The problem with _player.open is that you can not add any command switches.
A possible solution would be to use Valentin Shell Xtra:
http://Valentin.dasdeck.com/Xtras/shell_xtra/win/
(You will need to copy the xtra in the directory Configuration\Xtras of the Director and together with your projector).
Using this xtra, your code will become something like this:
on mouseUp me
pageNum = 4
PAP = baFindApp ("pdf")
theDoc = _movie.path & "pdfs\Powder Cores\Magnetics_Powder_Core_Catalog_2011.pdf".
theArgs = "/A" & CITY & "page =" & string (pageNum) & "= OpenActions" & CITY.
shell_exec (PAP, "open", theArgs & theDoc)
end
BaShell boyfriend may also work, but I have not tried.
Maybe you are looking for
-
How can I get the PDF of the manual iPad?
I tried this ad and a small yellow bird said that I am not allowed to post. If there are two of them, that's why. I just got an iPad bought directly from Apple. A card with it says I can download a PDF of the manual or use the manual through web page
-
I try to record using the classic Electric Piano, and I will support notes while recording, however when I play the black of the recording, the notes are not supported.
-
How many times can I load into windows until the c ode becomes obsolete?
How many times can I activate windows 7 same code key foer in a private home computer?
-
I'm upgrading to an SSD, I have a product key, but not the installation disc, and aparently you need eigther enterprise or ultimate edition to separately install a language pack in bokmål. It is easy for me to find in English, but I would prefer bokm
-
Can you put time on Windows 7 using any version of Windows parental?
Windows 7 does not support the allocation of time, only the curfew time. So I just installed Windows Essentials 2012 because it includes Family Safety that was to allow me to set the allocation of time, but apparently this feature does not work on Wi