CHKUPD Fragment problem

Similar Questions

• Memory Allocation problem when using JNI

  For a project, we need to interface Labwindows CVI / Teststand with an application written in Java. We use JNI. The code uses JNI_CreateJavaVM to start a JAVA virtual machine to run the Java interface code. The code did run for quite awhile, but now (without any obvious changes on the side of the CVI or on the coast of Java) JNI_CreateJavaVM will fail with the error-4 code, this means that of the JAVA virtual machine failed to start due to the failure of allocation memory. First investigation shows that even if the Windows Task Manager shows approximately 600 M free physical memory, you can allocate in ICB only about 250 M as a single block at the point where we call JNI_CreateJavaVM. Maybe it's a little less because we have - Xmx192m to the JAVA virtual machine to run our code. Unfortunately just to increase the physical memory of the machine of 1.5 G to 2G doesn't change anything. Free memory space in the Task Manager showed increases, but the memory total block size does not work. Are the trick to optimize the CVI/Teststand who use cases?  Or maybe the problems with JNI?

  Finally, it was a memory fragmentation problem with TestStand. See details/solution here

• JMS store the size of the file continues to grow

  Hello

  In our production system, the file size of the JMS store continues to grow (1 GB per day and statitistics on the show file size it is linear in time, so not because of a burst of time messages).
  First we thought that this is due to unconsumed messages or transactions not recognize, but console weblogic JMS statistics view current or pending message in one of the WAD of the file (and the application logs does not trace of error).
  The only exception is some of the messages that go on a SOL JMS file without being consumed her, but it's only 2000 messages to them and which represent all together less than 10 MB, so it doesn't seem to be related (unless there is a very specific fragmentation problem that ignore us).

  In addition, we have compact the jms store files using WLST and several trips are compact in 7.1 MB:
  Before:

  -rwx - 1 webadm webgrp 1, 24 3 August 10:51 FILESTORE_CANOEJMSSERVER_1000000.DAT

  -rwx - 1 webadm webgrp 1, 24 3 August 10:53 FILESTORE_CANOEJMSSERVER_1000001.DAT

  -rwx - 1 webadm webgrp 761 M 24 August 10:54 FILESTORE_CANOEJMSSERVER_1000002.DAT

  Command:

  Java weblogic.store.Admin

  Compact - ed.

  quit smoking

  After:

  -rw - r - r - 1 webadm webgrp 7, 1 M 25 August 11:33 FILESTORE_CANOEJMSSERVER_1000000.DAT

  We also release the content of the file using wlst, and we get an xml file of 11 containing only the message in the DLQ JMS file.

  The application treats about 10,000 JMS messages every 5 minutes on both nodes of a cluster. Watch application logs that he used successfully up to approximately 150 JMS message in a second.
  The size seems to increase only on the first node (the second node jms store file size is 50 MB without be compacted, 1 MB after beeing Compact):

  -rwx - 1 webadm webgrp 54 M 24 August 10:55 FILESTORE_CANOEJMSSERVER_2000000.DAT

  We have not seen this problem on other platforms.

  We do not know whether it can have a link, but the disk partition where the Bank JMS file are is not the same on the production platform.

  If you have an idea about the source of the problem or the things we should look at to understand what is happening, it would be greatly appreciated (because the problem appeared on the production platform, we have no access directly and must apply to the intervention. Thus information on the problem is not as easy as we would like to be).

  Thank you.

  Kind regards

  Hello

  To keep this conversation updated some information.
  So we managed to avoid this problem by failing to put messages in GENERAL store (and instead of remove them). A special consumer on the file have certainly solve the problem too.
  It seems that the jms server could not reuse space of the message successfully consumed for about 10,000 are added simultanesouly (every 5 minutes) and some of the 10,000 messages (3 to be exact) are unsuccessful are wrong and go (after 3 unsuccessful attempts) in file DLQ JMS in the same jmsstore.

  Note: in this case, add a limitation on the maximum number of bytes the Server JMS or modifying synchronous write strategy does not change the behavior: the size of file storage continues to increase until the file system is full.

  [edit] I forgot to mention that we you of the different priorities of JMS to the message in the JMS file [/ Edit]

• instance is down because of the 4031 error

  to the CCR (10.2.0.4, AIX, 64-bit), 2 instance is down, see the altert log,.
  
  ORA-04031: impossible to allocate 8416 bytes of memory ('pool', 'unknown object', ' sga heap (1.0) ","Great response KSXR queue") shared
  
  LCK0: end of litigation because of the 4031 error
  
  
  (s/n broungt upward.)
  
  
  (check the associated tracks)
  =================================
  Start information of diagnosis 4031
  =================================
  The following information helps Oracle in the diagnosis of
  causes of errors ORA-4031. This follow-up may be disabled
  by setting the init.ora = 0 _4031_dump_bitvec
  =====================================
  Allocation request summary information
  =====================================
  Current setting of the information: 04014fff
  SGA heap Dump interval = 3600 seconds
  Dump interval = 300 seconds
  Dump last time = 2010-09-19 15:18:42
  Dump Count = 1
  Application for: large KSXR response queue
  TAS: 700000010036770, size: 8416
  ******************************************************
  Segment of memory HEAP DUMP = name ' sga heap (1.0) "desc = 700000010036770
  extent sz = 0xfe0 alt = 216 het = 32767 rec = 9 = - 126 opc = 0 flg
  parent = 0 = 0 = 0 = 0 xsz nex owner x 1000000
  lock all 1 of 2
  enabled for this bunch of times
  pellets reserved for root 0 (16777216 granule size)
  ....
  
  check the memory,
  
  
  SQL > show parameter shared_
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  hi_shared_memory_address integer 0
  whole max_shared_servers
  shared_memory_address integer 0
  SHARED_POOL_RESERVED_SIZE large integer 15938355
  whole large shared_pool_size 304M
  whole shared_server_sessions
  SHARED_SERVERS integer 0
  
  SQL > show parameter sga_target
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  Whole large SGA_TARGET 7G
  
  SQL > show parameter cursor_sharing
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  CURSOR_SHARING EXACT string
  
  ###############
  
  the reason seems to surface is shared_pool is not big enough, but we can see that the LMS is large enough,.
  Thus, it may be shared pool fragmentation problem.
  
  In addition, the instance to the low resaon, is due to
  
  closing the instance because of the 4031 error
  
  
  
  
  the question here is:
  1. What is the reasoan for example the stop?
  
  
  2. How do I prevent it from happening again? We need to run RAS periodically shared pool or cursor_sharing simailar or force?
  
  
  Thank you

  Hello

  Look at what suggest you V$ SHARED_POOL_ADVICE.

  See if you can

  Use the INVALIDHTOMEH package to pin large packages.
  Try to reduce the use of shared memory.

  Kind regards

• Migrate from Dictionary Managed Tablespace locally managed - 10g

  Is there a document that indicates best practices to migrate the management measure dictionary managed tablespace to locally managed with automatic segment management space.
  
  I read that we can migrate using the DBMS_SPACE_ADMIN. TABLESPACE_MIGRATE_TO_LOCAL Procedure, but is not very clean because existing data will still use the managed dictionary and new lines inserted will follow the local space management, is this correct?
  
  Can someone please provide comments?
  
  Thank you
  KeV

  Kevin, my personal opinion is that future space management will be much easier for the DBA if the ADMINISTRATOR creates new tablespace by using local management instead converts the tablespaces in place. When the packaged DBMS_SPACE_ADMIN. Procedure TABLESPACE_MIGRATE_TO_LOCAL serves the existing objects are not resized and parameters such pctincrease are still in force. Convert the tablespaces bring their problem of fragmentation of space with them.

  New start. Also if you want to use SAMS you put on when creating tablepsace so new is necessary in this case. ALTER table move and alter index rebuild are an easy way to move most tables/index to the new tablespace. The old exp/imp can be used for objects with long columns.

  I saw the free space fragmentation problems in a tablespace which was not converted-allocation automatic. The use of auto-allocate will considerably reduce the likliness of a problem free space fragmentation, but in some cases, you may still experience the problem.

  HTH - Mark D Powell.

• Problem with binding components of fragments of page in bean managed when rendered as region

  I detected a problem when I bind a component in a managed bean for a page fragment which is a view of a TaskFlow exposed to JSF as a region.

  
  

  This problem happened when I exhibited same TaskFlow as region of two or more instances in the same Joint Strike Fighter. The component that is only returned in the latter region.

  
  

  JDeveloper 12 c (12.1.2.0) ADF12c.

  This is the code:

  The page fragment:

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <af:panelGroupLayout id="pgl1">
      <af:inputText label="Label 1" id="it1" binding="#{bindingComponentBean.inputText}"/>
      <af:button text="button 1" id="b1"/>
    </af:panelGroupLayout>
  </ui:composition>
  

  Bean managed (within the scope of the request)

  package com.edisa.test.errors.view.backing;
  
  
  import oracle.adf.view.rich.component.rich.input.RichInputText;
  
  
  public class BindingComponentBean {
      private RichInputText inputText;
  
  
      public BindingComponentBean() {
      }
  
  
      public void setInputText(RichInputText inputText) {
          this.inputText = inputText;
      }
  
  
      public RichInputText getInputText() {
          return inputText;
      }
  }
  

  TaskFlow

  <?xml version="1.0" encoding="UTF-8" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <task-flow-definition id="TestTaskFlow">
      <default-activity>test_fragment</default-activity>
      <managed-bean id="__1">
        <managed-bean-name>bindingComponentBean</managed-bean-name>
        <managed-bean-class>com.edisa.test.errors.view.backing.BindingComponentBean</managed-bean-class>
        <managed-bean-scope>request</managed-bean-scope>
      </managed-bean>
      <view id="test_fragment">
        <page>/fragments/test_fragment.jsff</page>
      </view>
      <use-page-fragments/>
    </task-flow-definition>
  </adfc-config>
  

  JSF page

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="index.jsf" id="d1">
          <af:form id="f1">
              <af:pageTemplate viewId="/oracle/templates/threeColumnTemplate.jspx" id="pt1">
                  <f:facet name="center">
                      <af:panelGridLayout id="pgl1" inlineStyle="border: 1px solid #eee;">
                          <af:gridRow marginTop="5px" height="auto" marginBottom="5px" id="gr1">
                              <af:gridCell marginStart="5px" width="50%" id="gc1" inlineStyle="border: 1px solid #eee;"
                                           halign="stretch">
                                  <af:panelBox text="Region 1" id="pb1">
                                      <f:facet name="toolbar"/>
                                      <af:region value="#{bindings.TestTaskFlow2.regionModel}" id="r2"/>
                                  </af:panelBox>
                              </af:gridCell>
                              <af:gridCell marginStart="5px" width="50%" marginEnd="5px" id="gc2"
                                           inlineStyle="border: 1px solid #eee;" halign="stretch">
                                  <af:panelBox text="Region 2" id="pb2">
                                      <f:facet name="toolbar"/>
                                      <af:region value="#{bindings.TestTaskFlow1.regionModel}" id="r1"/>
                                  </af:panelBox>
                              </af:gridCell>
                          </af:gridRow>
                      </af:panelGridLayout>
                  </f:facet>
                  <f:facet name="header"/>
                  <f:facet name="end"/>
                  <f:facet name="start"/>
                  <f:facet name="branding"/>
                  <f:facet name="copyright"/>
                  <f:facet name="status"/>
              </af:pageTemplate>
          </af:form>
      </af:document>
  </f:view>
  

  Component to bind to the support extended to bean bean would be.

  In fact, it is solely to support the scope of the bean - to distinguish two or more instances of the page fragment component.

  It has the same duration of life as the requestScope, but for different instances of the components parts / declarative, you have separate instances of scope backingBean controlled beans.

  http://adfpractice-Fedor.blogspot.com/2012/03/managed-bean-scopes-for-page-fragments.html

• Adobe will never address the problem of work on a fragmented hard drive?

  I spend a lot of time to defragment my hard drive (450 GB with 150 GB) free in order to ensure that the pre works without errors.

  I do not tend to make fairly long high-definition videos (two hours).  However, it seems that this problem could be addressed and the fixed Adobe would send some effort his way.

  Am I wrong?

  It's a question of operating system. Not a problem program. Mac, for example, do not have this problem.

  With any intensive program - especially when working with large files - you need huge blocks of contiguous disk space. Fragmentation that hinders.

  In the meantime, the simplest solution is to keep your publishing projects and media on a second hard drive. It's your drive C that gets defragmented everything, after all. A second disc media and projects (that most publishers recommend in any case) develops very little fragmentation of files and, especially if it's a large, takes very little maintenance.

• Repeated fragments display problem

  Hello

  I ran into a problem where I have a form created with LiveCycle designer that has several points of insertion of the same name.

  In these points of insertion of the same fragment to be inserted.

  The fragment is inserted into all insertion points, but the javascript as the property visibility (visible/hidden) of the objects that it does not work for the first insertion, point in the rest of the insertion of control points, it does not work.

  Is this a limitation of the assembler service? Am I missing something?

  Thank you.

  Instead of using the name of the object, using "this.presence" did the trick.

• Fragment of IP problem PS3 (netgear D6000)

  Hey guys, I recebtly was seen this problem on my PS3 where I can't play online and I have test fo a PS3 with an error that comes up saying "the router in use does not support ip fragmebts. I tried all possible solutions and my router is brand new and foesnt used to do this error, so if anyone has a solution that they thibk will help with router thia, I'd appreciate it a lot, thanks!

  Sorry, I'm using PPPOE, PPTP, L2TP, it is said he turned on!...

• No defragmentation for disk system (75% fragmented) why? HP (C :) and Factory_Image (D :) défragmentent OK.) What is the problem?

  Windows 7 Home Premium

  Pavilion F 6342

  Hello

  Thanks for posting your question in the Microsoft Community

  According the description preceding, you are not able to perform a defragmentation. I'll be happy to help you on this question.

  I suggest you run the disk check and see if that helps.

  Check a drive for errors
  http://Windows.Microsoft.com/en-in/Windows7/check-a-drive-for-errors
  
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Once you do the check disk, you can perform the defragmentation of drive from following link:

  Improve performance by defragmenting your hard drive
  http://Windows.Microsoft.com/is-is/Windows7/improve-performance-by-defragmenting-your-hard-disk

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Why everything seems fragmented

  I realized that the browser looks as if it has become fragmented across
  I uninstalled and reinstalled the new copy which is 42 but looks the same.
  the chrome browser works well on the other hand
  everything works well and looks good
  I have attached a picture of what it looks like
  Please give a solution to this problem
  Thank you

  Hi, try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will need to restart Firefox before this takes effect so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select the Options under Windows or Preferences on Mac or Linux.

  2. Select the Advanced Panel, then on the general tab.
  3. Uncheck the use hardware acceleration when available.
  4. Restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  If the problem is resolved, you should check the updates for your graphics driver by following the steps in these articles in the knowledge base:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  Thank you.

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• Qosmio G10 does not work - some graphic problems

  Hello
  I have a Qosmio G10 a few years back, within the first year of its use the graphics seemed to go crazy after using it for games.
  Since then, I've left the but recently I dug to see if I can get it fixed it as my partner needs.

  1. whenever I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  2. I tried the system restore cd, but when it finishes I wake a fragmented Windows screen with the beginning bar all over the place, and then it just freezes
  3. However, when I try a professional XP operating system to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  I thought it might be a cd of defective recovery but when I changed during a hard drive of new fresh on the wrapper started everthing briefly as it should do this before, he crashed any temptation of power again.

  Pulling my hair out please help!

  Hello

  > 1. Every time I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  Looks like the screen is positioned on the external monitor and so nothing does not appear on the internal screen laptops. Perhaps this happens because of the changed settings in the properties of the graphics card.

  > 2. I tried the system restore cd, but when it finishes I wake a fragmented Windows start with the bar start screen all over the place, and then it just freezes
  Usually the laptop should start correctly after the installation of the recovery CD. If the laptop freezes then a hardware problem is possible.

  > 3. However when I try an operating system XP Professional to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  In my view, your graphics card could malfunction. I come to the conclusion because the laptop works ok until the graphics driver will be installed. Without graphic driver installed the laptop seems to run I think GPU dysfunction could also be the reason why the laptop does not start correctly after the installation of the recovery CD. The restore CD already contains the graphics driver that controls the graphics card chip

  So in my opinion, you should contact the ASP in your country for a control of the laptop.
  Maybe the technicians could find the fault.

  Good luck

• HP Pavilion dv7 Notebook PC: HP Pavilion dv7-4180us Entertainment Notebook PC + 64 - bit, Microsoft Windows 10 Home, SYS fragmented

  HP Pavilion dv7-4180us Entertainment Notebook PC + 64 - bit, Microsoft Windows 10 Home, fragmented hard drive SYSTEM optimizes, 100% fragmented.  Daveobs

  

  Hello

  Assuming that the hard drive has a style of mbr, system partition contains startup files and the Windows recovery environment and it is quite normal to show him the fragmentation - that partition should not be défragmentée, because it can cause problems with the loading of Windows.

  Kind regards

  DP - K

• Problems to play the videos made with the Camileo S10

  Hi all

  I bought the s10 after Nice comments and demos, but unfortunately I can NOT PLAY THE VIDEOS I RECORDER!

  I tried so many players (SMPlayer, VLC, BSplayer, classic MP) I started thinking I have HW limits. image and its gel and the film is fragmented.
  What are you saying? someone encountered problems playing files S10? which player do you use? with what HW?

  Help, please! My son is getting older and I'm missing some really good scenes :-)

  u.

  Hello udizam,

  why Don t you use the media player?
  You will find them on the supplied cd. This disc contains the manual and the software ArcSoft (Media Player and Media Converter).
  I use them and I have no problem to play my recorded films.
  Maybe a bios update can help you.

  I used a processor AMD 64 x 2 2.09 GHz, 3 GB of Ram, bios v2.60, Windows XP, SP2, ATI Mobility Radeon HD 3650.

  The technical requirements, you can see the area of the cameras:
  Windows 2000 / XP / Vista
  Intel Pentium III - 800 MHz or higher
  256 MB of Ram
  700 MB of free space on the hard disk
  CD-Rom drive
  USB interface

  Best regards