Qosmio G10 does not work - some graphic problems

Similar Questions

• My book pro 15 Mac since April 2014 retina does not work because of problem of logicboard, and without any reason. Fact it is passed to one of you so early? Do you know something about any recall for this problem?

  My book pro 15 Mac since April 2014 retina does not work because of problem of logicboard, and without any reason.  Fact it is passed to one of you so early? Do you know something about any recall for this problem?

  There is no repair program from Apple for any 2014 Mbit/s at the moment.  Have you taken your MBP to a store for a FREE Apple genius bar?

  Ciao.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Satellite A200 - 28 P does not work, probably graphics card

  * Hello *.
  * Hello *.

  as the topic, laptop does not work, I think it's a graphics card defective (ATI Mobility™ Radeon® HD2600)
  I took out all the parts and I found a burned capacitor SMD 100nF/63V, I could be wrong
  below are pictures of the place where it is burned capacitor on the graphics card ATI Mobility™ Radeon® HD2600

  [http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183574_1280127579031_1705313723_515097_2492972_n.j pg]
  [http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/184823_1280764194946_1705313723_515905_3467147_n.j pg]
  [http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/183378_1280296983266_1705313723_515305_4843496_n.j pg]
  I would add that the laptop turns on but the screen is not started.

  I have a soldering iron and want to remedy, must only know what it is that

  I want it replaced with a new one, but I don't know if this a SMD 100nF/63V capacitor
  Maybe something else please help

  * I will be grateful for each answer *.
  * Thank U! *

  Huh it will not be easy to find the right answer.
  Maybe you should contact Toshiba service and ask for help. They have manuals for Maintenance and plan exact mainboard and they can help you with this.

  Buy a coffee and I m sure you will get the info you need. ;)

• Internal TV tuner for the Qosmio G20 does not work

  I have a qosmio G20 and the built in TV does not work, I reinstalled the driver and the program windvr 5 but no response.
  Whenever I start the program, I can't use the installer.
  Please can someone help me?

  Hello

  Qosmio G20 was delivered with Windows MCE.
  You can also use the Media Center Microsoft watch TV on the laptop!

  Please check if the built-in TV tuner works with MCE. If so, there is nothing wrong with the tuner or the drivers!

  Best regards

• "File > open recent" does not work.    Second problem: impossible to drag individual files or folders, from one place to the other.

  I recently installed Lightroom 6 (stand-alone version).  I have two separate issues: firstly the "file > open recent" does not work.  The cottage my last files but when I click on one of them, nothing happens (don't close the existing catalog, nothing new opens).

  Second problem: I can't drag individual files or folders, from one place to another within the section "Files" from the library.  I did this on a regular basis with older versions of LR so I know how it's done - it does everything just not in this new version.

  Thank you

  Chris

  I think that a Mac person will have to answer your question, I do not use Mac computers.

• Push app does not work: packaging / installation problem?

  Hello

  I created a small Java application to manage the MDS (push RIM) push on my device. It is supposed to run as a module and launch on startup of the unit. It should create a new notification profile and listn for data push. Then it should display a popup that contains data that has been rejected and the user must be warned.

  This app works great on simulators, the profile is created, the data push is displayed and the user is notified. However the application does not work on the real server device. The request seems to be ok (checked with a sniffer network), but nothing happens on the device. The profile is not created.

  I asked key signing, generated an alx file and installed the application on the device with the Desktop Manager. How can I check if the application is correctly installed and if it is started automatically and when I push the data running?

  It's ok now. I didn't realize that you must sign the application whenever you build...

  Thanks Mark.

• Qosmio G10 does not start

  Hello world
  I have a qosmio G10 since less than a year. It was just perfect.
  But now it won't start, but I'm unable to identify the source of the problem. (I have some experience with hardware problems, but...)

  When I push the Start button I have the ear of the DVD player running, the lights of the HD for a second and then the laptop seems to be turned on, but HARD drives do not seem to work (there is absolutely nothing on the screen, no boot screen at all). I am able to open the drive of DVD/burner to be able to exist even on the battery.

  Someone will be kind enough to share a few tips? (The FN F5/F1 key does not help)

  Thank you

  Did you hear one beep?
  This unique short beep is displayed if the device succeeded the POST (power-on-self-test) and the material is ok.
  The BIOS of the motherboard will occur always a POST during the power up, usually, this test is required to ensure its correct operation of the system and if a
  failure of the POST will identify the failure and emits a sound signal to ask the technician to take remedial action as soon as POSSIBLE.

  In your case, it s perhaps something wrong with the display. Try to connect the external monitor to the laptop.

  In addition, you can try to remove the battery and unplug the power adapter for a while.
  After several time try to connect the AC adapter again and try to start the laptop.

  If it doesn't help then I would really communicating with the Toshiba service partner in your country for the control of the laptop. Usually, technicians start some tests diagnostic and are able to locate the very fast fault.

• Why show Audio time units does not work? Maddening problem.

  Gentlemen, I am posting from the iPhone and do not have net access for computer so I will be brief and I can't post screenshots.

  Mounting with Show Audio time units no longer works on my setup. Adobe CS5 Production Premium.

  Can I change only the images of the film (the project is 1080 p 24) and it absolutely does not allow me something else. I checked not checked and rechecked the tab a dozen times. Restarted the program and even my computer a dozen times. I lost my voice screaming.

  WTH is going on here? I put four 12 hours a day in this one and am now completely stuck. Impossible to move forward.

  I would be very happy to help. Display via iPhone is incredibly difficult. I opened an older project, and it was not too be able to change with the audio time units. It's like my first pro is broken, but I'm absolutely unable to uninstall and reinstall now. I need to fix here and now, located in the middle of nowhere with no net access.

  This has happened once before, and nobody had no answer. I was forced to empty the entire project. This is not an option here. Thank you.

  You probably already checked the obvious things like having snapping power off and ensuring that any audio signal which is linked to the video is separated before editing, but I must still mention.

  Try to launch Pr from the shortcut on the Start Menu (or however you launch an application on a Mac that does not involve a double click on a project file) while holding down the keys Shift + Alt (Shift + Opt on Mac).  Maj resets the plugin cache and Alt (Opt) resets preferences.  Hold down modifier keys until you see the Welcome screen in the PR.

  Jeff

• Qosmio F10 does not work after the recovery procedure

  Hi, I just bought the toshiba recovery dvd for my qosmio laptop f10, I put the dvd in and it goes through the process of recovery and complete 100% he then told me to remove the dvd, and then press CTRL ALT DELETE to restart the computer.

  In doing so, he gets to the screen were it tells me windows startup and then the screen turns white and flickers a couple of times, and then the computer phone re boots and don't stop doing that, I press the F8 key when it restarts to go save mode, but when it starts in mode it tells me that windows is not completely set and goes no further and tells me that I need to run put in place to new.

  I don't have a windows cd only toshiba dvd that should put my laptop back to factory settings.

  Can aynone help me before I have sound toshiba?

  Thank you.

  Hello

  It's not easy to say why it happens. Usually, the Toshiba Recovery CD should work properly and after any recovery procedure, the laptop should run without any problems.
  You suggested that you ordered this CD from recovery of the ASP.
  Do you have the right recovery CD? Check the description of CD.

  The other possibility is that the device has a hardware failure. In this case, you must contact the service of Toshiba. Sorry, but that's all I can suggest.

  concerning

• I've updated to v10.0 version, now a specfic program that runs using a bowser does not work. The problem is when the program runs a compliance test the following error message is displayed in the test results: Test; Version of the browser, the Test result

  COMPLIANCE TEST
  Results of Test test
  Firefox browser
  Version 1 browser higher than 2.0 must
  Acrobat Reader Version 9.5.0.270
  Sun Java Plug-ins active true
  Java JAVA version
  JavaScript 1.8
  Flash Flash Player 11
  ERROR Please correct

  This program is probably only read 1 of the number 10 - IOW, it is not able to read a number with 2 digits before the decimal point.

  Contact the developer of this program and let them know that they have some Fixin ' to do.

  See the MP I send to you. See your Inbox at the top of the forum pages.

• Qosmio G10 will not work with VISTA

  Hello
  With earlier versions, windows vista run until you install the GFX drivers provided by microsoft.
  After the microsoft drivers (or nvidia), you have a 'blue screen of death '.

  But now, with PRE - RC1, this driver are integrated with vista. The result? you crash after installation of the Poles, you can not even start in vga (safe mode) mode.

  So my $2800 specifications can go in the trash? I hope toshiba will quickly correct this problem before the RTM of vista... It's not bad, I don't know what material support to do, there are many versions of vista, and I don't know why this problem is not solved! Yes, you can say "this is not the final version of vista", ok, but we are on RC1 stage and is not usable at all! I think its time to fix it and don't wait until the last second!

  Thank you and excuse me for my bad English! :)

  Cool, thanks for the info ;)

• Carpet * a UJ-820 s series Qosmio F does not work...

  It has happened now, and I can't play any CD or DVD.

  I checked his status, but there is not an error...

  What should I do?

  If the warranty is still valid, contact the customer Service of your country partner and explain the situation. They check the disc. If defective it should be replaced for free.

• Satellite C70D-B-300 does not work properly

  Hello
  Since I bought my laptop Satellite C70D-B-300 I have a few problems:
  (1) I can't turn off the laptop, (the screen turn off but laptop still running), similarly I can't close the session
  (2) start menu windows apps and sometimes that I can't open (if I click nothing happen)
  (3) 3/4 times a day, the laptop get in crash, I can't do nothing, I need to shut down with the power button (press for 10 seconds) even with ctrl + alt + delete does not work
  (4) new problems with 10 windows, I can not open a shop, sometimes cortana and star menu does not work so I need to restart... but I guess windows problem not Toshiba

  Thanks in advance

  There are too many problems.
  In my opinion, you must reinstall the original recovery image feature and test the laptop with 'presets' again.

  What is an option for you?

• Qosmio Player does not not on Qosmio G30

  Hello

  I got my laptop to out of area using the Toshiba recovery cd and now the qosmio player does not work. I can not play music without having to start Windows.
  I looked in the drive of all programs-utilities Toshiba - qosmio and he says that file not found.

  Help, please

  Hello

  There is a CD that comes with your laptop called:

  For the Qosmio player recovery CD

  you have to start the laptop from this CD, in the same way that you used in the installation of the windows recovery

  and follow the instructions

  concerning
  _________________________

  Please don't forget to take a look here:
  http://forums.computers.Toshiba-Europe.com/forums/help.jspa?helpType=reward