Choice of laptop: requirements of DVI, SPDIF, deejay

Similar Questions

• Connect the monitor to the laptop with displayport/DVI

  Help, I have a laptop Dell 1749 Studio. The machine is less than a year. There an i5-520 with 8 GB and Intel HD graphics. I connect to a monitor ACER X233H. I used the VGA connector on the laptop but wanted a more secure connection. I bought a Displayport DVI cable, but the monitor says "No Signal" I googled around but not found help with Win7 system.

  The photos are interesting. According to the photos, the cable connector is a DL-DVI-D, and the monitor is a DVI - D. I wonder if that causes problems?

  I have an old Samsung 203 b monitor. The monitor has the same connector DVI - D, like the ACER. I downloaded the driver on the Samsung site, on the laptop. When everything is connected, the laptop does not detect the Samsung. The message reads 'another display not detected. This is an another can of worms that I won't do side followed with.

  Time to try another cable, I think, with a regular DVI - D connector.

• Choice of laptop

  I need help for a cheap laptop to run LS4, but I don't see with the Pentium 4 or athlon 64. How do I know what will work?

  Thank you

  I think you mean Lightroom 4. So, here are the requirements for Lr 4

  http://www.Adobe.com/products/Photoshop-Lightroom/tech-specs.html

• My laptop requires a password

  Hi, please help me. He has written on my laptop which enter the administrator password or power on password, after that 3 passwords wrong it was written the system off and there were numbers 67633154, which password I can't write?

  Hello:

  Enter the unlock code...

  78791190

• windows 7 32 bit laptop required usb controller driver hp 15-d010tu(product id-F6D31PA#ACJ)

  Hello

  urgent need win 7 32-bit chipset drivers for my client... Please its very urgent im unable to find.

  Hello:

  You need this driver USB 3.0 for the processor Celeron N...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=23734&keyword=USB+3.0&lang=eng

  It is there no display driver W7 32-bit for the models with the celeron and pentium processors N in case you are looking for one.

  Your laptop will only work 8/8.1 Windows 32/64-bit or Windows 7 64 bit correctly.

• HP Deskjet 2540: Laptop requires password for wireless printing

  I have the printer wireless Hp deskjet 2540 series. It works well with my Ipad... but today, I tried to use it with my computer laptop it is asking password. I don't remember if I created a password. now can u tell me how to do this.

  Hello.

  On the control panel of the printer, press and hold the button wireless live () for 3 seconds, the printed sheet will include the passowrd for the printer.

  Kind regards

  Shlomi

• How to disassemble laptop Satellite of S70 - A?

  From my experience, most Toshiba laptop require a strip on the keyboard to remove before proceeding with the maintenance of the laptop. In these series, I think that this is not the case. I tried to remove the undercarriage of the laptop, but there seems to be something holding down.

  I also tried to remove the keyboard, but nothing is done, he didn't budge.

  How this approach?

  Please don't get me wrong, but why you want to disassemble your laptop?
  I assume that your laptop is fairly new and with a valid warranty. Computer laptop disassembly will void the warranty.

• Tecra A9 - Express Port Replicator: DVI does not

  I recently bought a Toshiba Express Port Replicator for my laptop Toshiba Tecra A9 PTS52E because I need DVI to connect my external monitor to the laptop Tecra A9 has only a built-in VGA.

  After you connect the laptop to the monitor I get no output on the external monitor, however. Descriptions of Replicator Port Express said that it has a DVI - D, my monitor has a DVI - D and the cable is a cable DVI - D single link so everything * should * work.
  I don't get out Visual at any time, nor in the BIOS (I can't find any options BIOS based DVI as well) or the OS.

  What is the trick to get this working? I have tested the monitor on the other workstations and the VGA out of the docking station works with other monitors as well, but unfortunately not via DVI with that I want to use.

  Hello

  Like many I know the on some series laptop Port Replicator DVI port unusable if the laptop doesn't supports this port!
  For example, the Tecra M1, M2 can use the DVI - D port and Tecra S1 cannot use it!

  Perhaps the with the Tecra A9

• Tecra M5-103: cannot get external DVI connetion to the monitor

  Hello

  I am unable to get the external DVI connetion to my flat screen monitor to work.

  I tried to plug in there by itself and restarts, plug with d - sub and reboot, by reconnecting it with reboot is not yet etc does not work.

  Someone had problems with this? Or he successfully?

  Thank you

  Richard

  Hello

  One question: the laptop supports a DVI?
  As far as I know the laptop has only RGB (monitor output port) and S-video output port.

  If you want to use an external monitor you need to connect it to the RGB port, then switch to the external display with the key FN + F5 combination

• Xbox360 connect DVI to Satellite P100-429

  Hello

  Can I connect my Xbox 360 to my laptop using the DVI connection?

  Thank you
  Stephen

  Hello Stephen

  AFAIK port DVI on Satellite P100 is Video OUT port and you can't send video signal to external device in the laptop.

• Power on laptop Compaq Presario CQ62 of password

  I have a Compaq presario CQ62 laptop requireing a power on password after 3 attempts gives key number: 64560868 someone help out me? Birdy

  Hello

  Try to enter: 71448268

  Kind regards

  DP - K

• Qosmio G30: Option unavailable SPDIF in the Audio properties

  Qosmio G30, SigmaTel HD Audio Codec, running XP 2

  I'm looking for audio signal through the built in coaxial to the GPA. No signal. When I go to sounds and Audio devices > advanced > Volume Control Panel /Properties there is no cursor for spdif badette, in the list of things to show in the advanced Panel, or a way to put in operation. Similarly, in sign of SigmaTel there no option to route via spdif.

  In addition, the advanced controls is grayed out in the Volume Control Panel.

  What did I miss? I can't for the life of understand me why there is no signal nor any how to activate spdif in this machine.

  In addition, in the Media control Devices Properties box, it is this list:
  (MCI) Audio CD
  (MCI) Microsoft Video for Windows
  Midi sequencer (MCI)
  Sound (MCI)
  mciqtz32.dll

  Who say that they are functioning normally. Any ideas why I can't find the spdif option?

  Thanks in advance.

  Hello

  The SPDIF socket is supported on the Qosmio G30. It s the same taken as the headphone jack.
  To use this SPDIF you must connect the audio amp with the laptop via a special SPDIF cable.

  What you could do is to start the DirectX using the command; Dxdiag

  There you can check if the SPDIF is available or not.

• Need for DVI, HDMI on Satellite A300-15 b output

  My toshiba laptop Satellite A300-15 b has only a VGA and S-video out;
  It has an Ati Radeon HD 3650 512 MB graphics card that supports hdmi and dvi, FullHD;

  I know that dvi and hdmi are of better quality than vga, so how can I connect my laptop to the dvi and hdmi ports to get the full quality?

  I think as a limitation on the taken resolutions dynadock supported?
  There is the vga - dvi converters, are good? and how to get quality hdmi and give the hdmi output? thanx

  Hello

  I doubt you'd be able to get HD quality on external monitor using this laptop.
  As you say the book contains the outputs VGA and S-video.
  The s-video port allows you to connect a TV to the laptop computer and the VGA to connect the external monitor.

  But the two ports provide analog video signals. The DVI and HDMI are digital ports and it s not possible to convert the analog signal into a digital signal.

  Of course you can use some cards but are not converter and I doubt that these adapters would improve the video quality.

• Laptop HP 2000: HP Notebook 2000-power on password/admin password: deactivated after 3 attempts.

  Laptop requires power-on password/admin password; system becomes invalid after 3 password attempts failed.  The disabled system code is: 95840774.

  Model # = HP 2000-bt69WM

  Product # = C2M21UA #ABA

  Serial No. = [personal information]

  Your help in this matter will be greatly appreciated!

  Sincerely,

  kt10doll

  Hello.

  Come in:

  20728370

• Pavilion ELite HPE-250f: ATI Radeon HD 5770 have double or Single Link DVI

  I have a HP Pavilion Elite HPE-250f come with a special version of the HP of the HD5770 AMD. Features HP say the Single-Link DVI. However, the Board of Directors contains 2 DVI - I connectors, which suggests that it is related to two. I want to buy a 2560 x 1440 screen, but it requires a DVI Dual-Linked. Can anyone confirm that the version of HP is double-linked or indead SIngle-Link? Thank you.

  Hello

  From the following link, it says DVI dual-link:

  http://www.Walmart.com/IP/HP-HP-HPE-250F/14271926

  I hope this helps.