Choose the right PC for PCIe-1430
It's the difference between PCIe-1430 and the PCIe-1429?
I already see this article:
Choose the right PC for the NI PCIe-1429
http://digital.NI.com/public.nsf/allkb/1FD6E5B5A08C1E0786256F9B0079D449
specifically, I want to know if anyone can share here the model of PC or configuration it uses with the PCIe-1430 framegrabber.
I want to know what pc should I have to connect 2 camera link card PCIe-1430.
Your help is appreciated.
Dear Moti,
I used the Dell Dimension 9100 and work Dell Precision 470 with the NI PCIe-1429 and PCIe1430, all two has worked well.
-Robert Eastlund
Tags: NI Hardware
Similar Questions
-
HP pavilion 15-e034tx: how to choose the right RAM for laptop
How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.
Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?
1-4 + 4 GB
2-4 GB + 8 GB
3-8 GB + 8 GBThank you
From the Manual:
Two customer accessible/upgradable memory module slots
Support for dual channel DDR3L (1600 MHz)
Support 8192 MB RAM system in the following configurations:
8192 MB (8192 MB × 1, × 4096 MB 2)
See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:
4 GB (PC3L, 12800, 1600 MHz) 691740-001
A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Choose the right paper for the job
Printing photos at home is a convenience that can save time and gas money. But sometimes printing comes out dull and faded and you know that the cartridges are fine. It might be the paper being uses in the printer that may be the problem. Learn how to choose the photo book of right for the work to achieve sharp and vibrant images. This link covers everything from how to choose the correct size paper to do the job and to fit the image. It also has a chart that shows what that finish and best suits the event and then you try to look just as it should. Do it right the first time can not only save time; but too much ink! Here is the link: http://www.hp.com/united-states/consumer/digital_photography/buying_guides/how_select_paper.html?jum...
As always, I hope the community finds this information useful.
-
I need help, choose the right diet for my HP Pavilion a1000
Hello
I need to replace my power supply on my HP Pavilion a1000. The vehicle currently has the original (A Bestec model: ATX-300-12Z COR.) HP P/N is 5188-2625.
I found one on ebay that has the same numbers, but instead of the CDR, he told RFI. I don't really know what that means. The list is below. Will this work? If this isn't the case, could you give me a link that would work?
Thanks for your help!
jimmycaps wrote:
Hello
I need to replace my power supply on my HP Pavilion a1000. The vehicle currently has the original (A Bestec model: ATX-300-12Z COR.) HP P/N is 5188-2625.
I found one on ebay that has the same numbers, but instead of the CDR, he told RFI. I don't really know what that means. The list is below. Will this work? If this isn't the case, could you give me a link that would work?
Thanks for your help!
Hello
Yes, the power supply will be ok. It is a desktop computer, so you don't have to use exactly the same power supply. It can be even more powerful, but be sure there is all compatible connectors. It seems that the version of the CDR is only 300W and the DDR 400 w. The connectors are the same...
-
Please help me choose the right format mask
Hello everyone.
We use Oracle 11.1.0.7 RAC.
Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:
NUMBER VARCHAR2
0,123 0.123
12345678-12345678
12345678.1234 12345678.1234
12345678.123 12345678.123
12.00000008 12.00000008
WITH data AS (SELECT 0.123 n FROM DUAL UNION ALL SELECT 12345678 FROM DUAL UNION ALL SELECT 12345678.1234 FROM DUAL UNION ALL SELECT 12345678.123 FROM DUAL UNION ALL SELECT 12.00000008 FROM DUAL) SELECT TO_CHAR (n) FROM data;
Thank you, Dmitry.
Hi, Dmitri,
Dmitry Dunaev wrote:
Hello everyone.
We use Oracle 11.1.0.7 RAC.
Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:
NUMBER VARCHAR2
0,123 0.123
12345678-12345678
12345678.1234 12345678.1234
12345678.123 12345678.123
12.00000008 12.00000008
- WITH the data AS
- (SELECT 0,123 n FROM DUAL)
- UNION ALL
- 12345678 SELECT FROM DUAL
- UNION ALL
- SELECT 12345678.1234 FROM DUAL
- UNION ALL
- SELECT 12345678.123 FROM DUAL
- UNION ALL
- SELECT THE DOUBLE 12.00000008)
- SELECT
- To_char (n)
- Of
- data;
Thank you, Dmitry.
I don't think that TO_CHAR can do by itself. You should maybe call TO_CHAR and then manipulate the output a bit.
Looks like TO_CHAR with 1 single argument does exactly what you want except when it returns a string starting with a decimal point, in which case you want to concatenate a '0'. So call TO_CHAR with 1 argument, see if returns the string begins with a decimal point and, if so, put a '0' on it, like this:
WITH got_str AS
(
SELECT n
TO_CHAR (n) AS str
FROM the data
)
SELECT n
CASE
WHAT LIKES str '. %'
THEN "0". Str
Of ANOTHER str
END AS str0
OF got_str
;
Output:
STR0 N
---------- -----------------------------------------
0,123.123
12345678-12345678
12345678.1 12345678.1234
12345678.1 12345678.123
12.0000001 12.00000008
What do you want for greater than-1 negative numbers? You may need to make the CASE a little more complicated expression, like this:
WITH got_str AS
(
SELECT n
TO_CHAR (n) AS str
FROM the data
)
SELECT n
CASE
WHAT LIKES str '. %'
THEN "0". Str
WHEN the str LIKE '. %'
THEN '-0 "|" SUBSTR (str, 2)
Of ANOTHER str
END AS str0
OF got_str
;
-
FOR ADMINS - how to choose the right answer on a thread on this forum?
FOR ADMINS - how to choose the right answer on a thread on this forum?
For example, on:
"missing plug-in" for safari after you download!
http://forums.Adobe.com/thread/897677?TSTART=0
It does not show on 5.1 Safari and Firefox on Mac OS X 10.6.8 6.0.2.
Thank you!
The normal user (non-admin type), which can mark a reply as useful or appropriate is the user who started the discussion.
-
Choose the right power supply for hp P6180t
Hi I'm going to buy a new power supply soon for my HP pavilion p6180t desktop computer and I started a 300w to the corsair cx750 power level. I also want to get a new graphics card soon something in the mid-range. I was wondering if this power supply is the right choice, or if its too much for my computer because I read in another forum that you do not want a power supply with a lot more power you will actually need. For a gtx 660, the minimum is 600w I think so I wanted to just make sure that the power supply is the right choice for my computer. Thank you
In fact, I think that the minimum for a gtx660 is 450w. I think a 750w for this computer is excessive. A 500w would be a lot. But if you buy one with too much power is just a waste of money it actually will not cause a problem. Like putting gasoline in an engine that doesn't need only regular.
-
Satellite L300 - 19N PSLB8E - can't find the right drivers for Vista 32 bit
Hello
After you have reinstalled vista 32 bit, I can't find the right drivers for: Satellite L300 - 19N PSLB8E-00V011DU
-VGA adapter
-Realtek RTL8101Family PCI fast ethernet
-videocontroller
-Controller SMEveryone?
Thank you already!
.Hello
Go to the page European driver Toshiba because it is European model:
http://EU.computers.Toshiba-Europe.com/-> support download &-> download driversYou will find all the drivers!
Display VGA adapter driver
Realtek RTL8101Family PCI fast Ethernet LAN card driver
SM controller might be chipset driver or driver card reader -
4540 proBook s: how to choose the right network driver
Hello guys. I clean installed Windows 7 Professional. Now, I see that I can not connect my computer to the internet, so I need to install the network drivers. I wen to the HP website and saw that there are 19 different network for my laptop drivers.
How to choose the right method?Hello:
Below are the links to the ethernet and wireless drivers you need...
Wireless:
This package contains the installation package driver for Ralink wireless LAN controllers in the laptop models running a supported operating system.
File name: sp66089.exe
This card also needs a bluetooth driver...
This package contains the OS driver installation package for the Ralink Bluetooth in laptop computers running taken in charge.
File name: sp59632.exe
Ethernet:
This package provides the driver for the Ethernet Realtek controller in the laptop models running a supported operating system.
File name: sp63213.exe
-
find the right drivers for HP ProBook 4530 s (B0W10ES #BCM)
Hi, I have problems finding the right drivers for HP ProBook 4530 s (product number: B0W10ES-#BCM)
Windows 7 Home Premium 64-bit
Intel® Pentium B950
ATI Radeon HD 6490
WiFi 802.11 b/g/n
Bluetooth
LAN 10/100/1000
ExpressCard 34
USB 3.0
Media card reader
Webcam
etc... Please help meStandard VGA graphics card
PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C & REV_00
PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C
PCI\VEN_1002 & DEV_6760 & CC_030000
PCI\VEN_1002 & DEV_6760 & CC_0300Base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880Base system device
PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2393 & CC_088000
PCI\VEN_197B & DEV_2393 & CC_0880Ethernet controller
PCI\VEN_10EC & DEV_8168 & SUBSYS_167C103C & REV_06
PCI\VEN_10EC & DEV_8168 & SUBSYS_167C103C
PCI\VEN_10EC & DEV_8168 & CC_020000
PCI\VEN_10EC & DEV_8168 & CC_020Network controller
PCI\VEN_10EC & DEV_8176 & SUBSYS_169F103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_169F103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_0280Unknown device
ACPI\HPQ0004
* HPQ0004PCI Simple communications Controller of
PCI\VEN_8086 & DEV_1C3A & SUBSYS_167C103C & REV_04
PCI\VEN_8086 & DEV_1C3A & SUBSYS_167C103C
PCI\VEN_8086 & DEV_1C3A & CC_078000
PCI\VEN_8086 & DEV_1C3A & CC_0780(USB) Universal Serial Bus controller
PCI\VEN_1033 & DEV_0194 & SUBSYS_167C103C & REV_04
PCI\VEN_1033 & DEV_0194 & SUBSYS_167C103C
PCI\VEN_1033 & DEV_0194 & CC_0C0330
PCI\VEN_1033 & DEV_0194 & CC_0C03Is necessary when you replace the hard drive to install SSD drive some software/driver? Thank you very much for your help!
Hello:
The specific drivers you need are:
PCI\VEN_1002 & DEV_6760:
PCI\VEN_197B & DEV_2392 & 3:
PCI\VEN_10EC & DEV_8168:
PCI\VEN_10EC & DEV_8176:
ACPI\HPQ0004:
PCI\VEN_8086 & DEV_1C3A:
PCI\VEN_1033 & DEV_0194:
-
Original title: Customize Menu
I would like to be able to choose the colors, as for the "selected" item, the active windows and inactive, the type and size fonts in menus and dialog boxes and the size of the icons and tabs, as was possible in Windows XP. Is it possible to do this in Windows 7?
Hi Ciriaco!
Please, do a right-click on any empty space on your desktop and choose personalize. In the new window in the background, click the blue window, click the blue advanced appearance settings.
I hope this helps!
See you soon
Julia -
Choose the right model of project
I'm pretty handy with Primere Pro CS5 and a bit with After Effects.
Usually of digital HD work.
But when it comes to formats, well, it's something that I need to focus on learning.
I have a DCR-HC21. Records on Mini-DV tape.
I have a lot of videos I want to transfer them to DVD.
I am able to import video from the camera using firewire, in first Pro CS5.
However, I want to be sure I chose the right settings when
initially implemented for the project. For the best quality.
Any help would be great.
Try this:
warningAnd to better understand what is happening, look at this:
How to choose the right sequence settings?
Edit:
When you create a new project you are presented
with a setting of the sequence to the choice menu.
You can skip this step by pressing "Cancel", then import your media
and create the type of sequence that best adapts to your images. -
Where can I get the right drivers for Satellite Z930 - PT23LA - 01 009?
A little history: I recently bought a version of Win7 to a Z930 in Auckland from PB Tech shop. I've updated to a clean version of Win8 64-bit. My Win8 seems works ok but I noticed something strange in the Toshiba PC Health Monitor - apparently the Toshiba HDD/SSD Alert is not installed, so I don't understand not his iconic display in the health monitor (but the health monitor think my SSD is in "Good" shape - maybe it's reading the INTELLIGENT of my SSD interface, or maybe it's just saying 'Good' because the integrity monitor is apparently able to operate?)
I can easily find different versions of the Toshiba HDD/SSD Alert Utility in questionable Web sites - download, but I really prefer to get my Toshiba support drivers. Which leads to my question:
Where can I get the right drivers for PT23LA-01 009? NZ nor the webarea to Toshiba support have this model in their menus. The closest match seems to be
http://www.MyToshiba.co.nz/support/computers/Ultrabook/satellite-z930/pt23la-01f00n/download?OS=30
There is probably not much difference between a PT23LA-01F and a PT23LA-01 P but it is a bit of concern to be download & install the drivers for a chip that is no my model...
See you soon,.
ClarkPS: http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-HDD-SSD-Alert/ta-p/347120 advise me the area downloads for Toshiba support. He also advises "not all utilities are available for each model and operating system. During the installation of utilities, install the TOSHIBA value added first. "Sigh... so maybe my problem is that I installed the Win8 drivers & utilities order when build my own-building a Win8 pass win7? Wouldn't surprise me in the slightest... but if this is the case are here all other dependencies in these built?
> Where can I get the right drivers for PT23LA-01 009?
First series of Toshiba laptops (Australian, European, etc) is very similar to the other
Your model of laptop Australian Satellite Z930 * PT23LA * series is the same as the European model Satellite Z930 * PT23LE * series.That's why the drivers, tools and utilities published for Satellite Z930 * PT23LE * series must be compatible with the Satellite Z930 * PT23LA * series.
To get all drivers for Satellite Z930 * PT23LE *, you should check this page:
http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EUThere, you can get all win 8 - upgrade the drivers. Also the HDD/SSD Alert Utility v3.1.64.14
Welcome them
-
Portege M200: Can't find the right driver for the TouchPad
Hello
I have a problem with my Portege M200.
Can't find the right driver for the TouchPad or a pencil,
I read that it must be a Wacom Touchpad, but no driver I've tried has worked.I hope someone can give me a list of all the drivers that I need to use my pen on the screen!
Thanks in advance.
Chris
Hello
All the drivers are located on the European driver Toshiba page.
Please check again.The touchpad needs an Alps Electric touchpad driver. It s is available on the page.
In addition, you should the Tablet Pack (on the page too)
This tablet PackMicrosoft Pack Microsoft Office XP for Tablet PC (Tablet Pack) allows you to write directly with your stylus in the documents of Office XP on your Tablet PC.By the way; You must use the pencil that was equipped with the Portege M200
Welcome them
-
I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but
Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.
You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:
Use iTunes to restore your device to factory settings - Support Apple iOS
If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.
copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support
Maybe you are looking for
-
Cannot disconnect from the Apple TV
Greetings. MBP end 2013. El Capitan ATV2 I can connect to my Apple TV very well (mirror or just connected). But once logged in, there is nothing more I can do on my computer. Including disconnect them. The screen clears all the windows and menus, and
-
VI LabVIEW Run-Time Engine adapter server configuration
I want to connect to use the desktop execution trace toolkit to debug LabVIEW code modules using the adapter runtime TestStand. How can I configure Server VI using LabVIEW VI in the LabVIEW Run-Time for TestStand engine adapter?
-
How hackers access your Hotmail account?
My Hotmail account has been hacked recently by a spam/scam person/company, which managed to send an email (as if it was addressed to me) to 600 iof my contacts. The content was obviously 'spam '. I had the same password for 10 years and never told an
-
How update from Windows xp to Windows 7?
I have the key. The instructions says to click on the Start button, click on search, ok when I type windows anytime upgrade, I have the answer, we cannot find this server. What can I do?
-
How BlackBerry Smartphones let you email on the server?
Hi, I am a very new blackberry user, about to take my 9000 delovery today! I read different tutorials for het me up and running, but have a question by e-mail. 1 if I created my blackberry to accept email from my POP Tiscali email account how to also