Choppy Sound on hp pavilion17-e020us when using the headphones no matter which helmet

Similar Questions

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• I6 fire babysit device when using the internet? any solution?

  I6 fire babysit device when using the internet? any solution?

  Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

  What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

• Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

  Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

  I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
  You can also consider its under warranty.
  Any ideas anyone?

  Hello

  It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

  > and when using the laptop without a windows mouse explore 'restore down' at random.
  >
  > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

  Whereas it should be, where´s now the problem?

  Please give clear and understandable feedback, then I and other users you could point to the solution.

  THX

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• disable the touchpad when using the mouse?

  How to disable the touchpad when using the mouse?

  Hello

  Please contact Microsoft Community.

  Most laptops have a function key (FN) which can be used in combination with other keys for example FN + F2 or FN + F7 to disable or enable the touchpad.

  You can also disable the touchpad in Device Manager.

  To disable the touchpad in Device Manager, follow these steps:

  1. Click Start.
  2. In the start search box type devmgmt.msc, and then on enter.
  3. In Device Manager, expand mice and other pointing devices and locate the touchpad.
  4. Right click on the touchpad and click on the disable option.

  Following the steps above should help you disable the touchpad.

• Excel crashing, freezing when using the spreadsheet

  Original title: Excel 2013 file size.

  Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

  My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

  Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

  On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

  Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

  I hope that makes sense, I know a little but not professional!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hi Axe_Juan,

  Could you please let me know the version of Photoshop installed on your computer?

  Also you want to State as Photoshop not to do a quick selection?

  If so, then head over to the Photoshop preferences, then the performance tab and click on 'Big and flat', restart Photoshop and then use the selection tool.

  If something else, please let me know.

  Kind regards

  Tanuj

• Problem opening pdf files.  I have Acrobat Reader DC/Windows by default, but when I click on the file, a file conversion screen with all these codes. Must use the "open with" function which is a nuisance.  Why it will not default?

  Problem opening pdf files.  I have Acrobat DC/Windows by default, but when I click on the file, a file conversion screen now with all these language codes. Must use the "open with" function which is a nuisance.

  Why it will not open by default when I click on the file?

  Hello

  I guess that you are looking for this:

  Open drive

  Go in Edition > Preferences > General

  Uncheck the option, the online storage see the opening of the files

  Click OK and restart

  Thank you

  Abhishek