Chr (10) does not not with isql * more

Similar Questions

• Satellite L100 - cooling fan does not start up more

  Hello

  On my L100 laptop cooling fan doesn't seem to work! It does not start up more and after awhile the laptop shuts down as it is too hot. What can we do?

  See you soon
  Mark

  Hi Mark,

  The fan lights normally the POST process before loading the BIOS. Your laptop will continue to boot normally, I presume that your fan control electronics is still viable, otherwise the MESSAGE would fail. So, it seems likely that the problem is with the fan itself. I suggest you check that the fan will run in fact and it missed upward (try to blow strongly in grids).

  If you laptop is still under warranty, then you must contact an ASP to get the fan replaced.

  Kind regards

• iPhoto ' 09 on Snow Leopard does not appear geotags more!

  Suddenly iPhoto ' 09 v8.1.2 (424) on Snow Leopard 10.6.8 does not appear geotags more!

  They have always been correctly posted so far...

  Neihter for old photos (taken by iPod touch 4th generation with iOs 4, but also other cameras to gps), nor to the more recent (taken by the iPhone 4S with iOs 8.3).

  None of my S. O. (OS X and iOs) never improved from those residing at the same time, with the only significant exception of 7.1.2 to 8.3 on the iPhone natively.

  Any advice?

  The contract between Apple and Google for the use of Google maps with iPhoto 9.4.3 and earlier for locations an elderly couple of months expired and was not renewed.

  Now uses Apple its own program for locations maps and too the use you need to run iPhoto 9.5.1 and Mavericks or 9.6.1 and Yosemite El Capitan or Photos and El Capitan.

  However, in order to get iPhoto 9.5 9.6.1 you must have a version of 9.X to Apple iPhoto has purchased and installed.  Because you can not buy Apple iPhoto 9 more your only option is to upgrade to El Capitan (a free update if your Mac supports 10.11.1) which will include pictures.

  Your Macbook model can run El Capitan and should be upgraded to 8 GB of memory from Crucial.com.  If you have the base 2 GB memory which is not sufficient to run El Capitan.  If you have 4 GB which works, but with your old machine upgrade to 8 GB will offer significant performance improvements.

  

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.

• Backlight does not turn on more Satellite M70 147

  Hello outhere.

  The backlight on my M70-147 M-series lights no more.
  First of all, I noticed that when the awakening of the laptop from the standby or hibernation mode.

  At first I thought that the screen did no more work, but when I looked closely I could still do believe the icons on the desktop remotely. So, initially, I rebooted the laptop and then most of the time the backlight will light and stay on.

  But now he did not do more, not even when I close the screen (to force the standby mode) and then open it again, the backlight won't turn on.

  I also looked at other forums and topics, what the cause could be a faulty inverter or a broken rear window.

  So can anyone with the symptoms described tell me what could be the cause?
  I am sure that everything goes well with the graphics card because when I hung on my laptop to my LCD of dads he just showed the Office from my laptop on the LCD display. Also the first time I did it after pressing Fn + F5 several times the screen of my laptop would come on a few times. But now it does not more.

  So can anyone with the symptoms described tell me what could be the cause?

  Thank you very much.

  > Can then anyone with the symptoms described tell me what could be the cause?

  For me, it looks like a faulty FL inverter.
  The FL inverter is a small part behind the frame of the screen and it controls the backlight.

  Usually the external monitor should work fine because the FL inverter affects the internal display only...
  However, the problem can be solved by the replacement of this part.

  I recommend you contact the Toshiba ASP in your country to get this part replaced

• I have a MBP Late 2013 will pair does not with 6s on Blutooth

  Read all comments (lots of old stuff on these communities) and tried all the suggestions of trashing the plist etc etc. Still unable to get my iPhone 6s to pair with my MBP end 2013.

  For a fleeting moment after that match it says connected not connected appears.

  AirDrop works, but my phone does not appear on the screen of the devices. If sending photos of the iPhone works well my avatar is not displayed as sender just my intials & where ever he gets the ints info not the name I use in my Contacts.

  Someone at - it any idea what is happening. This worked OK until recently.

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

  If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678

• Chr (10) does not?

  Hello-

  I am writing a procedure that returns a large (clob) of dynamic sql.

  To make it readable, I'm trying to insert carriage returns or line feeds the text, although they do not work.

  Basically, I have a large chain with "\n" where I want to carriage returns, then try to run REPLACE (input_string, '\n', Chr (10)) to create the output, but it does not remove the part "\n" in the chain.

  I also tried Chr (13) and Chr (13) | Chr (10), although in the same direction.

  In fact, running small business as a sql command (in sqldeveloper) did the same thing:

  Select REPLACE (' line 1\nline 2', '\n', Chr (10)) twice;

  line 1line 2

  or even just...

  Select ' line 1' | Chr (10) | "line 2" from dual; "."

  line 1line 2

  I'm sure this used to work in Oracle - or I do something wrong?  I use exadata - does it affect the syntax?

  Thank you very much!

  Are you an error?

  May be you are posting the output and see it in a single line.

  This works perfectly for me. I use SQL Developer, and he shows it in one line. But if you take the copy from here and paste it into Notepad, you would see it in two different lines.

  Check it out, if not already done.

  Ishan

• I just spent an hour to compose a response in a thread ("Firefox does not with paypal"), only to see "You do not have permission" to submit - total loss!

  I was connected to respond in the thread "Firefox does not work with paypal. I spent the best part of an hour carefully compose this response, case tests, links, etc... [Tip: Firefox, unlike other browsers, has a problem with the server paypalobjects.comscripts.] Because I had taken so long to write the answer, she seemed to be a good idea to check in via the Preview button, but I received a message that the service was not available. Of course, I decided to submit it anyway, but when I hit 'submit' I got a message "you don't have permission...". "- at which point I (stupidly) on another page with this message, and what I wrote was gone!

  Anyway, it is definitely not normal that the site log out after only an hour. Sorry to hear about this. Maybe there was a little problem on the server with your session. If it is reproducible, I wonder if you have any software that could be quietly elimination of cookies for the inactive sites?

• Satellite Pro 2100 - works does not with 2 sticks of RAM

  Hi all

  I've been with sticks of 2 x 512 MB RAM from a reliable supplier that reassures me that this RAM is compatible with the SP2100 laptop.

  With the two sticks installed, as soon as the machine is running, I get no display and 5 beeps (1 long, a follow-up of 4 short beeps). Each stick of RAM work well individually, and I also tested slot A and b. Thus, the 2 sticks of RAM are working alone and work the two slots. It seems that this machine has a problem with 2 sticks of RAM.

  The ACPI BIOS is up to date (v1.40). I also tried the old 256 MB stick with one of the new sticks of 512 MB - same problem. I tried this as the supplier of memory mentioned this Toshiba may take only 1 GB maximum.

  Any ideas why two sticks of RAM does not work?

  Thanks in advance and amicably.

  James

  Hello

  You are right. The laptop must be able to manage memory 1024Mo. (2 x 512 MB)
  Due to your description, I think that both modules are compatible, but cannot play together.
  In my opinion, you should use two modules with the same specifications

  Try to use the modules recommended by Toshiba;
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• Does not recognize devices more

  I have OS X El Capitan, 10.11.3 Version.

  Since a few days, my Mac does not recognize my printer more (even if it is properly connected, says 'offline'). I can print from my iPhone / iPad via the network, but not my Mac!

  And from today, even my Mac does not recognize my external, connected sound card USB.

  I wouldn't change a thing, but my Mac doesn' recognize my hardware.

  Help!

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• Active state with menu manual not working does not with child pages

  I created a horizontal menu manual on my master page with two links (at WORK and about me). I did them manually as it was the only way I could work out how the style and the menu items to distance as I wanted. I created an active state that works for the main page WORK and the about me page.

  However, I have four child pages under the work, but when you click on one of them that the active State for labor (a green line under work) does not appear. When I return to the menu options to try to "solve" the problem and choose "All pages" all child pages appear in the main menu I want and does not solve the problem. I chose manual that I could put the line to show that under the term of WORK and not all field.

  Here is my Web site to demonstrate the problem: www.robertgreens.com

  Any help to fix this would be appreciated with gratitude!

  I managed to solve this problem (with the help of Live Chat Support). I needed to create an autour work and provide a 'normal' State which resembled the active state, so when you click on the pages of the child, it looked like work page parent menu (with a green line) below. This meant that I had to duplicate master page and do the same (deletion of the green line in the menu of work) for the words Me page. And now, everything looks the same: www.robertgreens.com

• Audio fun does not with animation

  I think it must have something to do with the audio being does not correctly placed on the timeline, but I think I do everything that the directions said. When I put audio in the timeline, it will play the audio from the beginning, but if I stop the audio and try to play a place randomly in the Middle, it won't play anything. How can I fix so the audio will play anywhere in the animation, not only at the beginning?

  If you publish a swf file, use stream to sync the sound, no event property.

• JDBC connection does not with ORA-12514

  Hi all

  I also have problems with the connection to the DB CARS because the listener does not recognize the name of the service. I read many messages from the forum itself here and elsewhere and I just can't understand it. Everything seems in order, so I'm a little confused as to why it does not work.

  Thus, some specifications: I actually use SAP as advanced application to connect to the DB.

  DB is RAC 11203, two nodes.

  OS: Linux RH6

  Headphones and remote headphones are a race to the top.

  JDBC connection string fails:

  JDBC:Oracle:Thin:@(Description=(Address=(Protocol=TCP)(Host=virtualhost1)(port=1527))(Address=(Protocol=TCP)(Host=virtualhost2)(port=1527)) (CONNECT_DATA = (SERVICE_NAME = MYSERVICENAME. «"" WORLD)))»»»

  I check that the service is available in the cluster:

  ORA. < dbname >. myServiceName.svc online on physicalhostname1

  When I check the status of the listener on node1 he mentions the MYSERVICENAME downstairs so it's here

  [oracle@physicalhost1 bin] $ lsnrctl serv < DBNAME >. WORLD

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 2013-SEP-07 16:43:11

  Copyright (c) 1991, 2011, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (SDU = 32768) (ADDRESS = (= SAP COMMUNITY. (World) (Protocol = TCP (port = 1527))(Host=virtualhost1)) (LOAD_BALANCE = OFF)(Failover=on) (CONNECT_DATA = (GLOBAL_NAME = < DBNAME >. WORLD) (SERVICE_NAME = < DBNAME >. «"" WORLD)))»»»
  Summary of services...
  Service '< DBNAME >' has 1 instance (s).
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service ' < DBNAME > 001 "has 2 occurrences.
  Instance ' < DBNAME > 001 ', status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service ' < DBNAME > 002 "a 2 occurrences.
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Instance ' < DBNAME > 002 ", status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  Service "MYSERVICENAME" has 1 instance (s).
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  The command completed successfully

  When I check the node database in sqlplus

  SQL > show the service_name parameter

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  service name string < DBNAME > 002, < DBNAME > 001, < DBNAME >, myservicename

  That's where. The database is running.

  I am spent days on this and I am unable to understand. I tried to re - register the name of service to SIR with lowercase, uppercase. In fact, when I joined the service I used capital letters, do not know why crsstat it shows always lowercase. Also in sqlplus I see lowercase. I do know that if it's case sensitive at all, but shows the despair that I really tried everything. I think that the fact that I am using SAP is not serious as long as any application - what is uses the thin JDBC connection string.

  Help, please.

  Your JDBC connection string requires a service MYSERVICENAME. WORLD, it should be MYSERVICENAME.

• Lenovo Ideapad y700, keyboard does not! And more problems after that.

  This laptop is around the age of 5 months. While I was looking through the web suddenly the keyboard does not work. Because of this, I tried to restart my computer. And for some reason, a Novo button Menu appeared. I tried to press on enter (because it is already highlighted on Normal boot) and he used. Then I remembered that my keyboard does not work! I don't know what to do. I tried to press the power button to turn off, but nothing happened.

  Please help me! This is the first time I have problems in this pc.

  I don't know what to do...

  Lol just fixed!

  I left my pc drain its battery and when I open it again.

  IT WORKED! The keyboard works again and this menu didn't show up!

  Thank you very much

• I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

  I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

  Hi kriplurr,

  Thank you for keeping us posted about the State of the question.
  I'm glad you are able to run the updates.
   
  You can download the Windows Installer under the following link and check.
  Windows Installer 3.1 v2 (3.1.4000.2435) is available
  seehttp://support.Microsoft.com/kb/893803
   
  Or you can download it directly at the following link.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25
  (a) click on the above link.
  (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
  (c) install and check.
   
  Hope this information helps.