Screen HP Elite L2201x: question about cable

Similar Questions

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• Please, I want to ask questions about photoshop cc 2015 when I install on my pc I have message means that I have to change my screen althoug I later change my pc and I vedio card 2 gb

  Please, I want to ask questions about photoshop cc 2015 when I install on my pc I have message means that I have to change my screen althoug I later change my pc and I vedio card 2 gb

  Thanks for the update.

  I shared the article of the same error: error: "Photoshop has encountered a problem with the display driver"

  You need to update your graphics card drivers.

• Questions about screens

  Hi guys
  
  
  I have 2 questions about screens to OPA
  
  
  (1) how can I put a summary screen halfway through an application and view the status of the intermediate attribute and the values of the attributes at the basic level
  
  (2) if im dealing with several entities, how can I adapt the maintenance of the screen title to represent the selected entity.
  
  
  hope that makes sense
  
  Thank you

  (1) you can have the summary screen that appear as many times as you want, depending on how you chose to structure the objective attributes that you make available to the user on the summary screen. A simple example is instead of having a single objective attribute on the summary screen, divide the underlying rules in two attributes of purpose and have the second attribute hidden at the start of the interview. When the first goal is known, the user will return to the summary screen. You can use the visibility attributes to control the display of any intermediate or base attribute, you want the user to see and make your second goal visible so that the user can continue the rest of the interview. See the OPM help topic change how data summarized and reviewed interview for more details. According to the same approach, you can create far more sophistication in your summary screen design.

  (2) to have the title of the screen include the selected feature, use the substitution (for example % applicant ' s_name %). See the help topic OPM Change the text of an interview or of the sentence issue for more details.

  See you soon

  Anthony Bettanin | OPA & RCMP Partner Enablement | Oracle global alliances & channels
  Area to OPA knowledge: http://www.oracle.com/partners/en/knowledge-zone/applications/policy-automation-042908.html

• HP Elite L2201X - no video in BIOS

  Hi all... I'll start with the plug.

  1 = HP Elite L2201X monitor

  Monitor 2 = LG L226WT - BF Flatron

  Video card = EVGA GTX 570 HD (with Display port)

  PC specs = Intel Pentium Core 2 Extreme (4 GB RAM)

  OS = Windows 7 Ultimate 64-bit - AND - Linux Mint 10

  Problem = using only the HP Elite L2201X plugged into the video using the manufacturer card display Port Display Port that shipped with the HP Elite monitor cable... There is no video when the PC is started.  You can not see the BIOS or Boot Menu GRUB from Linux.

  Attempt 1 = testing various adapters and cables (DP to HDMI, DP to DVI - D and another DP to DP cable).

  Result = no video

  Attempt 2 = Hot-Plugged DP DP in the my work (Lenovo W510 with Display port) during execution of Windows 7 PC.

  Result = HP monitor turned on and cloned the Windows desktop.  I know the monitor and delivered the work of DP cable.

  Try 3 a = HP plugged into main PC using DP to DP.  LG monitor plugged DVI - D.

  Result = BIOS appears ONLY on the LG DVI - D monitor.  White screen on HP (light orange sleep all the time).

  Try 3 b = LG monitor to help, on the start screen for Linux, continued to load Windows 7 with two connected monitors.

  Result = finally turned on HP and took control, as monitor 1 in Windows.  LG became the 2nd display Windows.  Once again, this proves the monitor and delivered the cable work of DP on this PC as well.

  Then... the question is... I don't have 2 monitors on this PC.  Remove the LG monitor and leave only the HP Elite... I never see the BIOS or the Linux boot menu (this isn't a driver problem because it is before all the OS loading).  So, how to solve this problem?

  Just to add... I bought the graphics card EVGA GTX 570 HD ONLY because of this monitor needing a Display Port adapter.  I had already tried and has invested in the DP to HDMI and DP to DVI - D adapters and they do not work on the old card.  Since then, he has worked directly with my laptop to work, because he had a display Port so no adapter was needed... I thought that my old GeForce 8800 GTX was not just conversion right.  I realize now, is not the case and this is something with this monitor specifically.

  If HP... or someone else... How can I solve this problems?  Forget the OS I installed.  Suppose that I just bought a new PC which is not preloaded and I hooked this monitor HP.  At least... I should be able to see the BIOS.

  Any help is greatly appreciated and I know that others have the same issues.  I just, I saw not only the question clearly stated in any other thread... so why I start this one.  Maybe I can save people $300 on a new video card... like what just happened to me.  =)

  Thank you!

  -Shawn "ZenTsang.

  Hello
  
  Check the BIOS if you can alter the output of dp.
  
  > I thought that my old GeForce 8800 GTX was not just conversion right.
  > I realize now this is not the case and this is something with this monitor specifically
  
  I don't think that - dp has other signals than hdmi or dvi.
  PD can deliver dvi or hdmi, as the source switches to the old configurations, but most older dvi or hdmi sources don't know dp, so cannot deliver the right signals.
  
  C.

• HP Elite L2201X

  We got 5 HP Elite L2201X screens vga - display port adapters and cables vga 1 meter.

  When you connect all upward, the computer will detect another monitor and you can configure the parameters of 2 monitors, expand the office and resolution etc.. No matter how we try we can never obtain an image to display on the screen.

  the front LED light is still orange. If you power on and off, the LED turns orange then white.

  We tried different computers, screens, vga, combinations of vga cable adapters, we get the same result evertime. We do not have a computer with a display port, so we cannot test the display port to display the port option.

  All windows computers 7, all computers use the VGA output with vga, display port adapter. Each computer detects the monitor but nothing shows an image.

  VGA is analog, the dp is digital - it will be difficult to find a converter for it.
  Even from DVI / dp, you need something like this:
  http://EU.StarTech.com/AV/converters/video/HDMI-or-DVI-to-DisplayPort-active-converter~HDMI2DP
  Your card will not work as the other sense, and only if the source can provide signals analog vga.
  
  You will need to buy a graphics card with dp for this race.
  
  C.

• 2008 mac book pro screen flashing folder with question mark at startup

  2008 mac book pro screen flashing folder with question mark replaced boot hard drive and cable, continues to do the same.  any ideas to fix?

  Start your Mac by holding down the button Option. The should launch the window of Boot Manager where you can select the startup disk, and then click on restart.

  How to choose a boot on your Mac - Apple Support drive

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• Questions about TV Tuner Satellite A500/040

  Hi all

  I'm new to the Tuner of TV analog digital hybrid and I'm sorry if my questions seem as stupid.

  I have two questions about the of digital TV Tuner analog integrated hybrid in the Notebook Toshiba Satellite A500/040. My understanding is that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port. I wonder if I could watch TV shows on your laptop without connecting to a TV. If so, is the software needed? There are several USB TV tuners for desktops and laptops on the market, A500 hybrid TV tuner works differently these USB TV tuners?

  Thank you

  Young

  > I think I know that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port.

  N ° this s tv tuner not a HD!
  It s a digital tuner that provides digital video signal 576i and not 1080i.

  Of course, you can use the HDMI port to connect the laptop to the LCD HDMI port but you will not get the quality video full HD as blueray for example.

  I found this Australian page from Toshiba:
  http://www.MyToshiba.com.au/products/notebooks/satellite/A500/psam3a-04000e

  You will find this passage short text:
  + With tuner TV built-in, you can even watch analog or digital TV everywhere where you travel, while the HDMI ports make connecting high definition on your TV screen and sound system. +

  You can also watch TV on mobile phones display! It's a key reason why the TV tuner built in ;)

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Question about video drivers Satellite P100-257

  Hello.
  Question about video driver. Version 14.25... Works (tells... 945 GM chipset); 14.27--works but with ocassional problems (tells... 945GM/GU); version 14,29... (said 945GM/GU) - does not work at all - black screen, but you can hear sounds which tells that XP does all right.

  Why that? And what is GU? Pilot info says it is for 945GM, pilot says he's for 945GM/GU.

  All kinds of three said they are for Mobile Intel 945 GM Express chipset. Who initially my machine have said there. In section "video card" my machine said no Intel - some Calg... - don't remember exactly the name.
  Thank you very much.

  Hello

  As much as I know Satellite P100-257 supports the graphics card Mobile Intel 945GM. The code name of Intel's GM Calistoga
  This is not the same thing as the chipset Intel 945GM/GU. Both are different and so the graphics drivers are not totally compatible!

  The Intel page provides some interesting info on these chipsets:
  Mobile Intel Express Chipset 945GM

  Unfortunately, I have not found anything on the 945GM/GU.

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.