Chromecast and Airplay on the Netgear wndr 4500v2 connection problems

Similar Questions

• I use 1023TX dm4, and I install the windows 8, it have problem ATI display driver

  I use 1023TX dm4, and I install the windows 8, there is an ATI driver problem, I have two screen, one intel, and one is ATI. but ati driver does not, I need to turn off, can you help me?

  Hi Tomiko094,
  
  More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Most of the W7 drivers will work W8.
  
  Have a look here http://goo.gl/hmPRB for a document official on the update of drivers and software
  
  This document here http://goo.gl/CO6uV provides information on the upgrade to Windows 8
  
  I hope this helps.

• My office has just done a repair XP after a hardware change and now all user accounts have disappeared and he asks the administrator password when connecting!

  We have a unique system of Windows XP that run the software of engineering for certain calculations. All other systems running Windows 7, but what a XP system because it's the only thing that our calculations software runs on.

  CPU of the XP computer died on us and we had to replace the card mother and CPU. After the change of equipment, following Microsoft's OWN guide on the running an XP repair, we ran the system repair and got all the way to the login screen (no blue screen not as before repair). However, none of the accounts are there and he asks an administrators password. The system has NEVER had a password to our knowledge, it was built in the House, and all simply by clicking on the Administrative login asks for a password.

  What can we do? We needed this fix before today and wait for the repair of the system to do. Is it possible to enter the system to run the software? We tried the SafeMode (all forms) and they all will ask a password after Windows loading.

  It's so frustrating.

  (PS I have been building computers for nearly 15 years and have never had this happen)

  Thanks for the quick response. I looked into the system with a "start-up" program All original profiles seem to still be there. I don't know how to make them appear well. Can you direct me or tell me, how to make profiles see the place?

  The biggest problem, outdoors is not be able to sign more, is that the engineering calculation software is locked to this PC. It can be installed anywhere else without having to pay for a VERY new (I think that thousands of dollars) expensive key or a new version of the software.

  :(

  Yes, it's a problem.
  I believe you can use a UBCD4Win CD or Hiren Boot CD to locate and right click on the files you want to change. And then, if you properly in your repair facility, you change the attributes after you're done.
  Some guides are better than others. And here's one that I like:
  http://www.windowsxpprofessional.WindowsReinstall.com/indexrepairguides.htm
  If necessary, hire a PC Tech. It's much cheaper than buying a license that is thousands of dollars!

• How to connect on windows and stay without the computer back to connection

  When I login to windows 7 everything working, I can stop to read the reference books or leave my desk momentarily, period during which the screen will return to the login page of windows so I have to get my password again.  How can I stop this happen by changing a few settings?

  Hello:

  Go to your appearance and personalization in the control panel section.

  In the first section of personalization, click change screen saver.

  Uncheck the box that says "On Resume, logon screen."

  Paul

• Unable to access file and folders on the computer after you connect to a home network. Get isn't permissions error message.

  Original title: unlock files locked in the residential-change group of security settings does not (always says that I don't have permission even if I am Admin)

  I have a Windows 7 operating system. I am new to congregate.  I recently noticed that I was connected to a House Group 'network' and so I 'locked' cases to the case where I me be hacked (that I don't use other computers and thought it was strange).  Unfortunately, now that I want to access these files, it says I don't have permission and when I sometimes IN a folder, by allowing permissions administrator in the Security tab, I'm still stuck to see the documents by an error saying that I don't have permission.  I was rid of the congregate at a given moment, then 'active' it again with the idea that I should probably be in home group to make changes to the way they were.  I know that I blew it, but I don't know how to fix it!  Please help me to unlock these files!  I normally log - on as an administrator (no one else assigned to the computer), so I don't understand why I can't make changes to the permissions.

  Hello

  (1) where the files are stored on the computer?

  (2) would you move the music file to a different location/drive and check if the problem persists?

  (3) what is you get the exact error message?

  Method 1: 'Windows cannot access the specified device, path or file"error when you try to install, update or launch a program or file

  http://support.Microsoft.com/kb/2669244

  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished. Use this workaround at your own risk. To temporarily disable your antivirus software, see disable antivirus software

  Method 2: Virus scanner

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link to download Microsoft Safety scanner on the system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Hope the helps of information.

• XQuartz is at the origin of Internet connection problems

  I too wanted to install Inkscape, so I installed Xquartz first on my Macbook Pro (OS: El Capitan). Everything seemed to go well. Inkscape opened and was usable. However, the next day (today), I have found that I can use Chrome, but Safari and Firefox is unable to access the web pages. I can open the iTunes software, but I can't access the iTunes Store. I can open Skype but can not make calls. I can open the App Store software, but I can't access the App Store, and I can't connect to my Web site with FileZilla Server. I can, however, upload files to Dropbox, use GIMP, (Apple software) Pages, Word, VLC and Inkspot. Norton is turned and turn off the firewall does not help other issues.

  On the website http://xquartz.macosforge.org/trac/wiki/X112.7.8 , it says:

  D default X 11 Serverhttp://xquartz.macosforge.org/trac/wiki/X112.7.8#DefaultX11Server

  If this is your first time installing XQuartz, you want can disconnect and reconnect. This will update your DISPLAY environment variable to point to XQuartz.app instead of X11.app. If you prefer to continue using X11.app as your default server (you can always run XQuartz.app manually), you'll want to disable /Library/LaunchAgents/org.macosforge.xquartz.startx.plist using the launchctl (1).

  If I applied this redirect, my computer would be functional again?

  Any ideas on how to solve this problem would be welcome. Also, if anyone can tell me some instructions to uninstall Xquartz completely, I understand that too.

  I chatted with Apple Support and they helped me to solve this problem. All I had to do was reboot safe mode and test applications that do not have to connect to the internet. In Safe Mode, they have not had any problems. I turned off the computer and logged in normal mode, and everything worked. I really like amber and Trey to Apple Support!

• SPEED OF BURNING/FORMATTING OF DVD AND REWRITE OF THE T3729 UK WITH LIGHTSCRIBE PROBLEMS

  Hello, I have now got access to a key thread is started, so that's it.

  My installation is as above and was again in 2007. Again, it still took about an hour and a half to format a 4.7 GB dvd. It takes four hours to work back up to four discs actoss.

  Discs will not generally be re - format after erasing. I'm not impressed at all and finally after 3 years of struggle and screaming, I'm looking for a good Samaritan trying to throw me a lifeline.

  Notice to lovers?

  Concerning

  Brian

  Hi, Big Dave, thank you very much for freely sharing your expertise.

  I followed your link, but the download would not go ahead, because of the need for me to accept a condition, which was not reported anywhere as an option to accept. On the contrary, there was a specific "do not accept" which I did not disengage.

  I ran several PC Doctor programson my game to the top, which you would like to believe that all is well, but in truth, if this is the case, it's a desperately inadequate burner system, even my basic needs.

  I have, since this question found and used HP supports, with assistance online live with their experts, who suggested the same thing you did.

  Unfortunately, despite your, clearly a good Board, it seems that means that inexperience on my part, I can't avail myself of the installation. Or, I'm just a piece of noncompliant trash kit DVD standards.

  Kind regards

• Then my race g7-1167dx Win 7 with a router Netgear WNDR 3400 connect to 5G?

  ?

  Hello

  You are welcome

  There is only a relatively small selection of wireless cards that work in your laptop as the bios contains a 'white list' authorized wireless network cards - anything not on this list will throw an error "Device not taken in charge" at startup and the laptop does not start until the device is removed.

  Regarding the Page 55 of your Maintenance & Service Guide, the only compatible card that will give you the two bands (2,4 GHz & 5 GHz) is listed as the Realtek 8188BC8 802.11a/b/g/n 2 × 2 WiFi and Bluetooth 3.0 + HS adapter Combo.

  As I have not personally used a laptop with this card, I recommend you to check with HP when just ordering to make sure that it is exactly what you need.

  Kind regards

  DP - K

• First time that I Boot XP I'm missing operating system, it starts and then fine the next test. MBR problem?

  Just installed a new HD, with a fresh install of XP Pro.
  Now when I start the machine says missing operating system BUT it boots OK on the retry!
  Any thoughts on how to solve this problem?

  Looks like you have a marginal place on your hard drive.

  See the following Microsoft KB article:

  ""Operating system not found"or"Missing operating system"error message when you start your Windows XP-based computer.
    <>http://support.Microsoft.com/kb/321626 >

  HTH,
  JW

• I use Windows Vista and continually get the message that "my connection to the server has been terminated" when you use Windows Mail! __

  When do my mail on Windows mail very often get the message "your connection to the server has been terminated...". ». I called technical support with my ISP but also had a tech from my ISP came home, but no problems have been found with my ADSL service. It seems to me that there must be a problem with the server... suggestions?

  Thank you

  Thanks Cody,

  I downloaded Windows Live Mail successfully, but when I connect to my e-mail I always get Windows Mail screen I always had. Is that all I have to do to "transfer" to Windows Live Mail.  Can I remove the Windows Mail program...

  Brian

• I just upgraded to widows 7 and new XP machine, I own Acrobat 9 standard and installed on the new machine.  My problem is my vision and all PDFs use the READER instead of Acrobat 9.

  How can I get my new widows 7 to Acrobat 9 on the drive when you work with Outlook.  Everytime I open a pdf file it opens in the drive instead of my acrobat 9 std. I hope this makes sense.

  Hi paulf54407224,

  Right-click on any PDF file & follow the steps in the screenshot below.

  1) open with-> choose default program

  

  (2) select "Acrobat 9 Standard" & check the option below "always use the program selected to open this type of file".

  

  Click OK to confirm.

  This will make Acrobat 9 your default PDF Viewer.

  Kind regards

  Nicos

• Pavilion dv4-2160us with Atheros AR9285 and D-Link WBR-2310 wireless router connection problem

  NB sometimes has problem connecting to the router. This occurs when the NP is booted from power, or when the connection of power mode after about a day of economy since his last connected. Although the network sharing Center sees the network to connect to, but shows only "restricted access". But if the power to the router is recycled, then the connection is established. The driver for the Atheros AR9285 is up-to-date. The firmware of the router is the latest v1.05.

  A test ping Google permanently on the NB and a computer that is connected to the router to isolate the problem. Whenever Google is ping successfully, it displays a message and the response time in milliseconds. If the ping fails, the message will be "Ping: transmit failed." General failure. "  It turns out that, while the test on the wired computer worked without a hitch, the NB has shown that at the same time, the internet connection was lost during the time of connection. He then recovered after a few 'pings '. At another time, the internet connection has been lost permanently without recovery, also during the time of connection.

  Anyone has the same problem?

  After changing the security mode WPA2 to WEP router wireless, the problem seems to have disappeared. It's been 3 days and the computer can still make the connection to the router. HP support says that HP wireless network adapter works best with the WEP security setting.

• in the waking state socket connection problem

  Hi all.
  My app need update real-time security data, it should be able to run well even the switch of the PB in the waking state.
  The problem is that when PB passes to the waking state and more than an hour later, my application cannot send request for data to the socket server (initially he workd well), even when the PB get again enabled, the socket connection is also unnecessary.
  I did a test as follows:
  1, I added the "throttled" in the blackberry - tablet.xml
  2. I have add a few listiner event in the main class, but each of them can be fired in any time.

  QNXSystem.system.addEventListener(qnx.events.QNXSystemEvent.STANDBY,onDeactive);
  QNXSystem.system.addEventListener(qnx.events.QNXSystemEvent.ACTIVE,onActive);
  QNXSystem.system.requestResource(QNXSystemResource.NETWORKING);
  stage.addEventListener(Event.USER_IDLE,userIdle);
  stage.addEventListener(Event.USER_PRESENT,userPresent);
  stage.addEventListener(Event.ACTIVATE,onStageActive);
  stage.addEventListener(Event.DEACTIVATE,onStageDeactive);
  

  3, I put a clock to save information in / shared folder.it worked well in the waking state.

  Thanks for any response.

  Hello.
  I'm a developer of instant messaging which is connected to the door via socket. What I can tell you for sure I you need to use:
  normal
  That, to use SocketMonitor to ensure that connections are available, some WiFi routers can close idle connection event when U don't want to! If you need to reconnect in such cases.
  Please, feel free to ask for help more.

• Service Hello Adobe seems to be the cause of my connection problems

  After? the upgrade? for Win7 Home Premium Vista HP I too lost my internet connection while the network remained active. After fiddling around with modem, router, adapter, and various features of Win7, that I finally managed reliably restore my internet connection by disabling my adapter ethernet edge (nVidia NF4Ultra) and then the reactivation. However, after the restart I would again lose the connection. Thank you people on this forum, the Adobe Bonjour service has been mentioned as a possible culprit. I went into the Task Manager and found the service under a number name (right clicked 'properties' confirm) and disabled the service.

  After considerable testing (restart to cold 1 & 1 warm reboot), my internet connection has come to active.

  I have not experienced fluctuations in transfer speeds, but I haven't got Win7 for about 20 hours that day.

  I don't know what the implications of the judgment the servie of 'Hello' is still, but I'll take the internet feature for now.

  Thanks to all for helping them solve this problem. Good luck to those still searching.

  Please let us know.  Bonjour is Apple.  It is not necessary, and you can uninstall in Control Panel > programs and features .  For more information, see Apple Hello FAQ Page . Boulder computer Maven
  Most Microsoft Valuable Professional

• The HP Web site connection problems

  I can't connect to the HP website, it comes back with this error message. I have a HP6510 Photoprinter (Ajax submit failed: Error = 403, Forbidden)?

  It happened to a lot of people in the past. The General workaround is to try to restart your computer, if it won't always connect try using another web browser.

  If you still use IE6 or I believe firefox 3.6 or an earlier version, they are no longer compatible with the site.