Cisco 1250 12.4 (25 d) JA customer dot11 associations does not age
Hi all
I have a stand-alone Cisco IOS 1252AP we have a number of SSID (MBSSID-guest mode), which is a public one.
It was found after IOS upgrade customers associations come more and more and never seem to timeout, even if they are no longer associated, following the example below:
Dot11 THEAP #show associations
802.11 client Stations on Dot11Radio0:
SSID [XXXXXXXXX]:
MAC address IP Device Name Parent State
0023.322C.946C 0.0.0.0 unknown - homes Assoc
581f.aa41.5fdd 0.0.0.0 unknown - homes Assoc
9084.0d2c.ec61 0.0.0.0 unknown - homes Assoc
dc2b.615b.CE65 0.0.0.0 unknown - homes Assoc
Hello
Here is the bug I see... This requires a study more... Please do not hesitate to open evidence of the TAC with us...
Concerning
Surendra
Tags: Cisco Wireless
Similar Questions
-
When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?
You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.
If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.
-
Custom scan box does not touch "scan" because of my 13 "screen. Cannot reach it. How can I fix it? THX.
Try increasing your screen resolution.
-
custom ring tone does not work
After the update this morning I hope this question was correct.
I use a custom for some people to know how ringtone call by ringing. But nothing changes.
It does not work.
Nobody knows or has heard of this problem?
Thank you
Try these general steps. They could help.
1 reset your iPhone by pressing and holding the sleep/wake and home buttons.
2 disconnect you from your iCloud account and reconnect again.
-
user interface customized with VI does not
Hello
I tried to use a user interface customized for VBAI using VI. I got to the point where I can run the VI all by himself and to see the work of logic. However when I add to as part of the user interface and switch to the inspection mode and run it, it does nothing. Let me know if I'm doing something wrong. Attached you will find the program, I work with.
Thank you.
I just tried your VI... you must have a VI that does not forever in a loop. You can use some time recording the loop that runs once and uses the SHIFT to follow the previous results of previous runs of the step. Use of the is the first call? Primitive in LV to initialize the first shift register. Here is a modified Test.vi that will work better.
-
Custom pages OAF does not not in the R 12.2.4 upgrade
Hi guys,.
We are upgrading to R R 11.5.10.2 12.2.4. We have copied our instance of generation of Production and improved to R 12.2.24. Now, there is a problem with the custom pages OAF. It seems that the custom java class files are not get covered by the application.
Since it is the body build, I am applying custom patch directly in the file system to run (fs1) and I am getting below error while executing one of the custom of the OPS page:
oracle.apps.fnd.framework.OAException: could not create Java class: (oracle.apps.xxfe.f486.asn.lead.webui. ASNLeadQryCOEx) associated with the area: (ASNLeadQryRN). It is probably because the class name is incorrect or not included in the project.
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2848)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1991)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:567)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:455)
I think that it is simply saying that it couldn't find the java class. But I checked in the system as indicated below, the class files are roughly:
$ cd $JAVA_TOP
$ cd oracle/apps/xxfe/f486/asn/lead/webui /.
$ ls - ltr
total 10
-rw - r - r - 1 a2bur12a s/n 5693 7 Jan 13:23 ASNLeadLstCOEx.class
-rw - r - r - 1 a2bur12a s/n 3397 7 Jan 13:23 ASNLeadQryCOEx.class
I also checked the class path, which is also to top java:
$ cd $JAVA_TOP
$ pwd
/ opt/lapp121/FS1/EBSapps/COMN/java/classes
$ echo $CLASSPATH
/opt/lapp121/fs1/EBSapps/comn/util/jdk32/lib/dt.jar:/opt/lapp121/fs1/EBSapps/comn/util/jdk32/lib/tools.jar:/opt/lapp121/fs1/EBSapps/comn/util/jdk32/jre/lib/rt.jar:/opt/lapp121/fs1/EBSapps/comn/shared-libs/ebs-3rdparty/WEB-INF/lib/ebs3rdpartyManifest.jar:/opt/lapp121/fs1/FMW_Home/Oracle_EBS-app1/shared-libs/ebs-fmw/WEB-INF/lib/ebsFMWManifest.jar:/opt/lapp121/fs1/FMW_Home/Oracle_EBS-app1/shared-libs/ebs-appsborg/WEB-INF/lib/ebsAppsborgManifest.jar:/opt/lapp121/fs1/FMW_Home/oracle_common/modules/oracle.uix_11.1.1/uix2.jar:/opt/lapp121/fs1/EBSapps/comn/java/classes:/ opt/lapp121/fs1/EBSapps/10.1.2/forms/java:/opt/lapp121/fs1/EBSapps/10.1.2/forms/java/frmall.jar:/opt/lapp121/fs1/EBSapps/10.1.2/jlib/ewt3.jar:/opt/lapp121/fs1/EBSapps/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar
I've heard that it takes run the utility adcgnjar and when I tried, I got the message below:
Generation customall.jar...
Do not create custom not customall.jar like no java directory under JAVA_TOP.
Maybe it's because the location of the custom folder which is$JAVA_TOP/oracle/apps/xxfe
I also tried to install these custom features of the OPS in online marking (as per my understanding following the features of online marking is not required (this is just an instance of generation) so earlier I had installed directly in the file system to run). But in following mode of patch, I had some error in ADOPTION (prepare) as below:
FATAL ERROR *.
PROGRAM: (/ opt/lapp121/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl)
TIME: Fri Jan 9 15:07:37 2015
FUNCTION: main::validatePatchLocation [level 1]
ERRORMSG: / opt/lapp121/fs_ne/EBSapps/patch/19258581 directory does not exist.
[UNEXPECTED] Error occurred during execution 'perl /opt/lapp121/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl-
Notice that I use the commands below to bounce at the intermediate level:
- stop adapcctl.sh
- admanagedsrvctl.sh stop oacore_server1
- Enter the password for Weblogic: < pass >
- admanagedsrvctl.sh start oacore_server1
- Enter the password for Weblogic: < pass >
- adapcctl.sh start
I am mainly looking for the installation of this file system customization to run if it is absolutely not necessary to do so in the patch file system.
Please let me know if anyone knows about it, or any way to go?
Thank you
Anupam
Hello
I could solve this problem. I am writing the solution that worked for reference:
- When the custom java files are placed in one of the shipped Oracle directories of the application (for example $JAVA_TOP/oracle/apps/fnd, $JAVA_TOP/oracle/apps/ad, etc) then the creation of custom jar file is not necessary.
- When the custom java files are placed in $JAVA_TOP /
/ and then run the utility adcgnjar.
- Deploy customizations that are created in the package. oracle.apps.xxprod * and no xxprod.oracle.apps. * or xxprod.oracle.apps.xxprod. * on EBS 12.2.X?
It was our case because we have a custom directory under $JAVA_TOP/oracle/apps/xxfe
When the custom java files are placed in any other non-standard location (for example $JAVA_TOP/oracle /, $JAVA_TOP/oracle/java / etc) then custom jar file must be created manually and must be made available for WebLogic to pick it up.
Detailed instructions are given below:
Create a temporary custom.zip file that contains the entire application customized to the non-standard location directories/files:
(1) cd $JAVA_TOP
(2) zip r - customprod.zip. Where the list of all directory paths are present, compared to $JAVA_TOP for the custom to the non-standard location application java files.
Generate customprod.jar file & sign 3).
Command: adjava oracle.apps.ad.jri.adjmx - areas $JAVA_TOP/customprod.zip - outputFile $JAVA_TOP / customprod.jar - jar $CONTEXT_NAME 1 CUST jarsigner - storePass - keyPass
(4) delete temporary customprod.zip.
Command: rm $JAVA_TOP/customprod.zip
(5) follow the steps below to allow the custom WebLogic jar
(a) to take a backup copy of the existing /admin/template/ebsProductManifest_xml.tmp
(b) modify /admin/template/ebsProductManifest_xml.tmp to add the customprod.jar (after customall.jar)
(c) execute AutoConfig
(d) bounce midrange services
Thank you
Anupam
-
Export custom LUTS works does not in 2015?
I just upgraded to 2015. However I export the coils that usually, I add a custom .cube LUT for export. In the 2015 version, this gives just a low level error and nothing happens. Encoder Media also seems to me does not allow to select a LUT either. Everyone race in this issue?
My current workaround is to change in Pr2014.
Hi mercy,.
Yes, we have reported this problem to the relevant team.
Also, you can open the color Lumetro Panel and apply to READ it and then try to export by Media Encoder.
Check out the link for more information below.
Vinay
-
Customer service Web does not work in OIM 11 g 2
Hello
We have created a web client using axis 1.6.2 and its use in 11 GR 2 IOM to request the Validator Plugin. But we get question as org.apache.axiom.om.OMAbstractFactory. getOMFactory() could not be found. When we checked the jars in the classpath, we found that IOM already a weaker version of axiom1.2.5 in its class under oim.ear path that does not contain this method however Axis1.6.2 contains the most recent version that contains this method. Is someone has any idea how to replace the JAR of IOM default classpath file and force to the library to read available in plugin files?It seems that OIM 11 g a conflict with Axis2 because it contains old jar files used in the axis. Remove these jar files or update these jar files break existing functionality of IOM. The Web service in our case client worked after you have created the client using WSIMPORT, even if we include the classes of Customer Service under the oim.ear/APP_INF/lib folder. We have tried, including the class files of client under the plugin only, but somehow always sought IOM under the oim.ear folder. Probably a bug in OIM 11 g because I could not find mention this anywhere in the documentation.
-
Custom class event does not reach Application?
Hey everybody,
It is probably a pretty easy question, but it left me speechless. I can handle the events of user interface components in the Application. I can handle the events of a custom user interface, within its own class object. But the dispatched event of a custom, object of the user interface does not seem to reach the Application. The event is expected to reach Application? Event if an object should be managed within the class of this object, how can I control my program flow?
Thank you!
I saw only he made in the settings where they inject an event dispatcher. If you don't want to use a frame, you could have a singleton (vomits in the throat) and pass a UIComponent. Now remember you this UIComponent must be fixed on the display as list
var vbox:Group = new Group();
vbox.dispatchEvent ("myEvent")
still will not be heard by the rest of the application. You would have to wait for a user interface component to add pass THEN to your singleton for use in the rest of the application. Honestly, I didn't think too much about.
-
Custom user interface does not update
I have to paste a code very long to explain my question, for I can not download the attachment to the forums.
The ListStyleButtonField has been downloaded from the official website, it's very cool, I think so, but now I faced a problem with this custom user and the PaneViewManager interface.
Can I use ListStyleButtonField.setText (String text) method to update the text of the list in normal application, but using PaneViewManager is not updated the text, unless you use the keyboard to move the focus to another field.
In my code, it is a PaneViewManager, 3 parts, and ListStyleButtonSet 3 in Pane1, press 1 to change the text of lists by pressing 2 2 keyboard component and so on.
For example, in part 1, I press the 1 key, the Pane1 lists need to be changed, but I move the focus on them and then they will be refreshed.
too much code so shortly before the end of work...
I would try to call invalid, or, if that fails, return all the elements of the listfield. -
Cisco VPN Site to Site with a static and dynamic does not
Hello
I have ASA 5510 in Headquarters with static, IP and ASA 5505 in the remote site behind ADSL router trying to establish VPN, but its failure in phase 1
Config of the headquarters
interface Ethernet0/0
Description link to router LeaseLine
nameif outside
security-level 0
IP x.x.x.x 255.255.255.248
!
interface Ethernet0/1
Description link to LAN internal
nameif inside
security-level 100
IP 172.17.1.15 255.255.255.0
access extensive list ip 172.17.1.0 inside_nat0_outbound_1 allow 255.255.255.0 172.20.1.0 255.255.255.0
access extensive list ip 172.17.1.0 inside_nat0_outbound_1 allow 255.255.255.0 172.19.1.0 255.255.255.0
access extensive list ip 172.17.1.0 vpn_to_remote allow 255.255.255.0 172.19.1.0 255.255.255.0
extended VPN ip 172.17.1.0 access list allow 255.255.255.0 172.20.1.0 255.255.255.0
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound_1
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Crypto ipsec transform-set esp-aes-256-md5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
correspondence address 1 crypto dynamic-map cisco VPN
Crypto dynamic-map cisco 1 set of transformation-ESP-AES-256-SHA
card crypto outside_map 10 correspondence address vpn_to_remote
card crypto outside_map 10 set pfs
card crypto outside_map 10 peers set y.y.y.y
card crypto outside_map 10 transform-set esp-aes-256-md5
outside_map crypto 10 card value reverse-road
dynamic outside_map 30-isakmp ipsec crypto map Cisco
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
md5 hash
Group 5
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 20
tunnel-group y.y.y.y type ipsec-l2l
tunnel-group ipsec-attributes y.y.y.y
pre-shared-key *.
tunnel-group parkplace type ipsec-l2l
tunnel-group ipsec-attributes parkplace
pre-shared-key *.
The Remote Site configuration
interface Vlan1
nameif inside
security-level 100
address 172.20.1.1 IP 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 192.168.1.2 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
ICMP list extended access permit icmp any one
access-list SHEEP extended ip 172.20.1.0 allow 255.255.255.0 172.17.1.0 255.255.255.0
extended VPN 172.20.1.0 ip access list allow 255.255.255.0 172.17.1.0 255.255.255.0
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 0.0.0.0 0.0.0.0 outdoors
Access-group ICMP in interface outside
Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
crypto map outside_map 1 is the VPN address
peer set card crypto outside_map 1 83.111.252.242
card crypto outside_map 1 set of transformation-ESP-AES-256-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 20
tunnel-group fairmount type ipsec-l2l
tunnel-group fairmount ipsec-attributes
pre-shared-key *.
Best regards / Asfar
Hello
Have you tried to replace the names of 'tunnel-group' entry with Ip address on both ends... ?
Thank you
MS
-
Custom paper sizes does not save
Hello world
Our IT Department has just installed Acrobat X Pro on our PC and I downloaded the instructions to print custom paper sizes, but they do not save. I go to printers and faxes, right click on the pdf printer, click Add on the settings of PDF tab, add the name, dimensions etc... click Edit/save... and nada. When I go to print it isn't here. What I am doing wrong. I know that it's going to be something really simple and I am being a numpty.
It's so much easier on a mac. Laughing out loud
Try right-clicking on the PDF printer
Run as administrator > properties
-
Customer e-mail does not correctly since 31.0 update
I use a webmail client to access my email account. When I create a new message or reply to an e-mail, it opens a new window for the message. The window is less than the maximum value, but it can normally be resized.
Since the update to 31.0 yesterday, this new window opens but immediately reduced to a size of unmanageble. If I resize or maximize it, it shrinks back again. I had planned to attach a screenshot of the problem, but it doesn't seem to be a way to do it.
I tried to reset Firefox, but that made no difference.
I don't have the problem on Internet Explorer (I hate use!)
Any resolution received with gratitude, because it's totally past.
The problem has been resolved. My hosting upgraded to Smartermail Enterprise 12.3 company and it everything works normally now.
Thanks for your help.
-
contact customer service link does not work
It indicates that the service is unavailable, whenever I click on the link to try and get intouch with them.
not to mention cleeeeearly im not the only one having this problem according to the forum. It's beyond rediculus. No one can get help and what I understand, when they finally get through, it's someone who can barely speak English. I think I'll just show one of my evouluant friends all the posts about this problem and they are running a story. Good luck
-
Equium L300 custom startup, recovery does not help
Hello
I just started having a problem where load my t won high tower. It comes up with a box saying that the installed program cannot start click ok to shut down the computer.
I tried to put in a recovery disc and pressing F8 to access advanced options but have no option to install the drive. I tried repair option but just come with gray screen and the box with the message that I mentioned previously, I tried safe mode and even once again.
I am at a loss to know what to do now and am hoping that it s not the hard drive.Hoping someone can help.
Thanks in advance
MurphyHello Murphy
In my opinion, you should try to install recovery image and test the functionality with the factory settings. Start your laptop and enter the BIOS settings. I don t know what model of laptop you have, but I guess you can do this by using F2 at startup. By default the BIOS settings and restart your laptop.
After restart press F12 to get into the boot menu. When the boot menu appears on the screen, place the recovery in the optical disc drive disk, choose the CD/DVD drive in the menu and press ENTER.
Optical disc drive is obliged to start as first boot device and start to read the disc.If everything starts fine just follow the menu on the screen.
By the way: what model of laptop do you have?
Maybe you are looking for
-
I can't find an article explaing how junk email works.
What happens to the emails after a click on junk?If you click on the flame of suspicions about what's going on?JA
-
stops current runs and deletes all system restore points
System Restore stops during the run and removes all previous points. tried to open and close and tried to manually set points. "He fixed but delete again on the next race event viewer alert gives says ' 0xC0000243 ' treatment ' mpengine.dll. hrddisk
-
I can't update windows automatically or manually. I get a message indicates "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "Anyone with a useful suggestion l ask you to
-
Open submenus when I stop on them with the mouse pointer does not work
I used to use Vista Upgrade of XP until it hit the big time. With this installation, the option 'Open submenus when I dwell on them with the mouse pointer' worked perfectly well. Since I did a format and installed the full installation of Vista vers
-
BlackBerry Curve Blackberry Smartphones SMS
Try to send a text message and get a network "failed" in red letters in the message and it does not send. No idea what I'm doing wrong please?