Export custom LUTS works does not in 2015?

Similar Questions

• Customer FTP works does not in Windows 7

  I am completely confused at this point.

  Any FTP client I use, I can not connect to any FTP site.

  I checked that there is no limitation on my router, and I called my ISP to confirm.

  I have my firewall Windows completely shut down and restarted my computer with my Panda Antivirus disabled.

  Connect to any FTP or SFTP site gives me the following error:

  Connection has expired.

  First of all, this problem has occurred by using FileZilla, which is the program that I have used in the past to connect through sftp on my site.

  I run The Network Setup Wizard and left my FTP connection in passive and he told me that I had an incorrect external IP address.

  I went back in and put my FTP connection as Active and this allowed me to connect, but at the very last stage, it hangs and then reports Connection timed out.

  I used programs like WinSCP and PuTTY to connect as well, and they both give me the same error: Connection timed out.

  Someone at - it recommendations for troubleshooting?

  I'm open to suggestions, if there is something that I may have missed in my settings also router.

  Hi Liam,

  Welcome to Microsoft Community forum.

  I suggest you follow the suggestion provided by Muhammad Adeel Jules replied on 17 March 2013 in the next thread.

  FTP does not connect in Windows 8

  Note: the thread deals with Windows 8 , but the steps mentioned applies to Windows 7 .

  For more information, you can also check out the link below.

  File Transfer Protocol (FTP): frequently asked questions

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Export as Adobe PDF does not open automatically, and the downs of drop on all my options do not work... Help, please

  Export as Adobe PDF does not open automatically, and the downs of drop on all my options do not work... Help, please

  I need to be able to easily convert PDF into word documents, which is why I got it, but in the acrobat reader software recent update/upgrade the export to PDF option doesn' automatically open, nor the dropdowns work to "create a pdf" "change pdf" etc.

  Hi howardr59083057,

  Make sure that you have installed the last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the pdf Export service help Acrobat Reader | Export PDF to Acrobat Reader DC.

  You can also use this service online at https://cloud.acrobat.com/exportpdf

  Kind regards

  Nicos

• The wedge does not in 2015 CC Muse?

  The wedge does not in 2015 CC Muse?

  

  It's always grey, - I can't work with it? even if the bevel is on or of?

  Could someone help me?

  Hello

  Could you please confirm what item is selected when you get this grey Panel?

  Rectangle, picture, text box (with a web font) or text box (system font)

  Some detailed screenshots would be really useful.

  Concerning

  Vivek

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Adobe flash player not working does not or does not appear as an application under Tools, options

  Adobe flash player not working does not or does not appear as an application under Tools, options

  If you can't Flash 11.3 to work and need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• my microsoft work does not work error message that I need to reinstall, but I don't have a disck because it was already installed when I bought at walmart

  I bought my dell computer 2009 Wal-Mart, that he has is already set up with windows vista basic... and now my microsoft works does not work it says I have to reinstall.  However, he is not come with a disc. so, how can I do without having to buy a disc

  Go here: https://smartsource.dell.com

  This is where you go to download programs that have been installed on your computer that you do not have a CD for.

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Active state with menu manual not working does not with child pages

  I created a horizontal menu manual on my master page with two links (at WORK and about me). I did them manually as it was the only way I could work out how the style and the menu items to distance as I wanted. I created an active state that works for the main page WORK and the about me page.

  However, I have four child pages under the work, but when you click on one of them that the active State for labor (a green line under work) does not appear. When I return to the menu options to try to "solve" the problem and choose "All pages" all child pages appear in the main menu I want and does not solve the problem. I chose manual that I could put the line to show that under the term of WORK and not all field.

  Here is my Web site to demonstrate the problem: www.robertgreens.com

  Any help to fix this would be appreciated with gratitude!

  I managed to solve this problem (with the help of Live Chat Support). I needed to create an autour work and provide a 'normal' State which resembled the active state, so when you click on the pages of the child, it looked like work page parent menu (with a green line) below. This meant that I had to duplicate master page and do the same (deletion of the green line in the menu of work) for the words Me page. And now, everything looks the same: www.robertgreens.com

• Download a trial of cc 2014? My computer does not support 2015

  Download a trial of cc 2014? My computer does not support 2015

  Hi Jennifer,.

  Sure.

  Please download the CC 2014 from the link below:

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Kind regards

  Sheena

• I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I'm bitterly briv

  I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I bitterly regret it.  Help, please!

  Open the Adobe Creative Cloud application then go to preferences then sign out and then sign back with the same Adobe ID that you used to purchase the subscription photographers, that is to say the same e-mail address and password.

  Then open Lightroom and go to the Help menu and make sure that it is signed in with that Adobe ID email address.

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.

• Custom scan box does not touch "scan" because of my 13 "screen.  Cannot reach it.  How can I fix it?  THX

  Custom scan box does not touch "scan" because of my 13 "screen.  Cannot reach it.  How can I fix it?  THX.

  Try increasing your screen resolution.