Cisco SCF reports the current scanning Proxy
Dear all,
I need a current way of the declaration of the "scanning Proxy. The reason I need it is that a number of users have reported the "Web Security Module" within Cisco Anyconnect is the transmission by proxy on the wrong country. For example, UK users in a law firm are transferred by proxy through the France where Office B is not.
We are a global company, I want to just do a check on the rest of the environment.
Thank you
Simon
Hi Simon,.
I suspect you are using ' AnyConnects more close round sensing function to allow AnyConnect WSM (Web Security Module) to send traffic to the tower which will give you the best performance based on factors such as network latency and the best way to name a few.
A common reason that this logic can happen would be due to the binding of the ISP itself and latency plaguing the path to a single round vs the other. If there is latency in the UK tour, but not for the tour de France, AnyConnect will come the turn of France to provide you with the best service.
You can verify this behavior specifically by running a traceroute to the towers in question and comparing the latency time. In addition, a DART bundle running in verbose mode will produce a detailed output of the stats that anyconnect used in this instance to choose the best tour. In addition, you can uncheck the option "Detect Closest Tower" and manually select the tower to use.
CWS (wire) to declaration not currently has the ability to report on the ID of the tour or the code of the country that traffic has been handled through.
Tags: Cisco Security
Similar Questions
-
How to report the current time on the ESX host in to a csv file with the following
Hello guys
I have the script next where I make the required details except the current time on the ESX host. Anyone can guide me please.
{foreach ($esx to $vmhosts) $hostVC = $vcenter $hostCluster = $esx. Parent.Name $hostHost = $esx. Name $ntp = $esx | Get-VMHostNtpServer $hostNTP = "$ntp". } I want to integrate the following for loop of the above for loop and ge the output in a single table.
foreach ($esxcli in get-vmhost | get-esxcli) {"" |} {Select @{n = "Time"; e = {$esxcli.system.time.get ()}}, @{n = "hostname"; e = {$esxcli.system.hostname.get (.hostname)}}}
Add-Content - Path '$hostVC, $hostCluster, $hostHost, $hostNTP, $hostTime' $hostInvFile - $ hostTime is where I want to get my host right now.
I'm vcenter, esx name, name of the cluster, host of the ntp server address, but I need the host thus present.
Thanks in advance.
Thank you
vKar
Try changing the line where the script retrieves the VMHost to this
$vmhosts = get-VMHost-State connected. Name sort
This way the script will be only to ESXi nodes that are "connected".
Pick up time for those defective does not much sense in all cases
-
Background color of the current line in the interactive report
Hello
Sobebody could tell me if there is anyway simple changing of style in IR to set up the background color of the current line. In the Standard report, it is easy. Just click for the shared components > models > modify a report model
and in the section line pointing out it is an attribute to change a color.
Can someone tell me how to do in interactive report?
I want to just split one row of the other using a line color.
Thanks :)
Published by: rafix 2009-11-23 09:42Cool. Where is my correct score then: P
Mike
-
Function that return the name of the current report
Hello
Anyone know if there is a function that returns the name of the current report?, similar to GET_APPLICATION_PROPERTY (CURRENT_FORM) in the forms.
Tnks,
LEFMHello
You can use the builtin: SRW. GET_REPORT_NAME
This function returns the file name of the running reporthttp://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/PLSQL/builtins/SRW/srw_get_report_name.htm
NOTE: it is not the name of the RDF file. Is the name defined in the reporting name property.
Concerning
-
How can I get a report containing data on the current month and the next month
How can I get next month?
I want a report that include data on the current month and next month.
My solution is "Closing Date". "" Fiscal month "> = Valueof (NQ_SESSION. CURRENT_MONTH)
S 'closing Date '. "" Fiscal month "< = MONTH (CURRENT_DATE + 30)
But this show only the information between the current month and the date of the day + 30 days
Does anyone have a better solution?
You can meet the next email [email protected].
Greetings!GON,
Add the near field date in your report, add a filter and choose between. Place the cursor in the first box and select Add - SQL expression, paste into the first expression that I gave you. Repeat for the 2nd box and voila it will filter you need. If you are unsure, then use the superior / equal to the value for the first term and the lower than the 2nd.
see you soon
Alex -
Filter a report to take the date of closing days for the current month
Hello.
I need to create a filter on to only opportunities extraction that are expected to close for the month that we are in a report. By that I don't want to not just Augustus, but regardless of the current month is that the report is run
The date 'Should close' is a timestamp field in our OnDemand.
Thank you!Hi, you can create a SQL filter as below
YEAR ("Closing Date". Date) = VALUEOF (NQ_SESSION. CURRENT_YEAR) AND MONTH (the "Closing Date". Date) = VALUEOF (NQ_SESSION. CURRENT_MONTH)
Hope this works
-John CRMIT
-
Cisco Nexus 5548UP switch current Version 5.2 (1) N1 (4)
Hi, we are currently have Cisco Nexus 5548UP switch current Version 5.2 (1) N1 (4)
It is not listed as affected version:
Known affected releases: (5)5.2 (1) N1(8A)6.0 (2) N2 (5)7.0 (3) N1 (0.125)7.0 (4) N1 (1)7.1 (0) N1 (0.349)The fixed versions known as follows:
Known fixed releases: (7)6.0 (2) N2 (4.3)6.0 (2) N2(5A)7.0 (1) ZN (0.615)7.0 (5) N1 (0.173)7.0 (5) N1 (1)7.1 (0) N1 (0.371)7.1 (0) N1 (1)It needs to be updated to the latest versions?
If Yes, what version of the fixed known better adapt our current version
Cisco Nexus 5548UP switch current Version 5.2 (1) N1 (4)
Thank you.
I had the same question, so I opened a folder of TAC to find the version of the software. I was told that the software listed as available in the bug report are versions of NX - custom OS and that there was no version patched for the 5548p. The support engineer also said that the updates of Nexus 5 k should not until November or December. The best advice I could get was to subscribe to the bug report and wait to be notified of an available upgrade.
-
The touchpad scrolling stops working during the AVG scanning
I had problems with my touchpad scrolling intermittently does not not in Firefox for everything to doing some time-probably at least a year. I've probably tried all the common fixes without result. I found that if I sign out and then sign back in to Windows, scrolling will work perfectly until AVG antivirus does a scan or an update. It will not work again until disconnect me and reconnect. Firefox is the only application that is affected.
I am running Windows 7 Home Premium (64 bit) with all current updates on your laptop Gateway ID49C, version FF 27.0.1.
Thanks for your help!
Hello!
I figured out how to stop the break when an AVG scan starts. It seems that it is the AVG scan notification that appears in the bar of tasks that causes scrolling to stop working. When I disabled the taskbar notifications in AVG, the scans run normally and my scroll continues to operate correctly. So, I guess I don't really fix anything, but found a workaround I can live with that.
Thanks for your help and assistance. If you find a permanent solution, please let me know. Have a great day.
-
I've updated (more than once) to Firefox Version 8.01. When I check the Firefox Help: About, it confirms the version number and indicates that it is the current version. Google, however, when I try to use G-Mail or + Google, gives me a message that my version of Firefox is no longer supported (and provides a link to download the current version). In addition, Firefox itself, when I tried to use the help: menu option to submit your comments, indicates that I can't use this option until I first updated to the current version. Apparently, even though I've updated, there are some markers or indicator, which is not updated since a previous version to indicate which version of this browser Web sites is running on my computer. I would like to get this resolved, because it prevents me from doing a few things I want to do. Furthermore, I just watched the dialog below, following the comment "we have made some assumptions about your current browser...". ', also indicates that my current version is the 3.5.7.
You have a pref general.useragent.override that identifies you as Firefox/3.5.7
- Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)
See:
-
Corresponding to the current thread BSD process name: fseventsd
Got a new iMac that is causing me problems for a few weeks with crashing every 24 hours more or less at the same time (01:10 - 01-20 in the morning). Has made many controls, cleaned and repaired the disk removed third-party drivers like Toast or Avira: result is zero. I would be happy to receive any suggestions as to a solution.
Modellname: iMac
Modell-Identifizierung: iMac17, 1
Prozessortyp: Intel Core i7
Prozessorgeschwindigkeit: 4 GHz
Number of processors: 1
Gesamtanzahl der Kerné: 4
(Pro Kern) Cache L2: 256 KB
L3-Cache: 8 MB
Memory: 32 GB
Boot ROM Version: IM171.0105.B05
SMC-Version (System): 2.34f2
Serial number (System): DG * Q17
Material-UUID: F6CE3130-683C-5FF5-A857-F5FFB1E5DE33
Anonymous UUID: 8EA9D2FE-8E6E-C4D1-E2FF-192BE1AD40B0
Fri Jan 1 01:09:32 2016
Panic report *.
Panic (4 CPU): Processor is not responding (this CPU did not recognize interruptions) TLB status: 0x0
RAX: 0X00000000000002FF, RBX: 0XFFFFFF807244AA08 RCX: 0 X 0000000000000001, RDX: 0X00000000000034F8
RER: 0XFFFFFF83BC2F36B8, RBP: 0XFFFFFF83BC2F3720, IHR: 0 X 0000000000000002 RDI: 0XFFFFFF807244AA0A
R8: 0XFFFFFF8011CE0B78, R9: 0XFFFFFF8011CE0B78, R10: 0XFFFFFF8011CE0B78 R11: 0X000034F84CBFF8F4
R12: 0XFFFFFF807244AA0A, R13: 0XFFFFFF8011C2CE90, R14: 0 X 0000000000000000, A15: 0 X 0000000000000001
RFL: 0 X 0000000000000086, RIP: 0XFFFFFF80115C3D4C, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010
Backtrace (4 CPU), Frame: Return address
0xffffff83af08af80: 0xffffff80115d08cf
0xffffff83af08afd0: 0xffffff80115ef3f9
0xffffff83bc2f3720: 0xffffff7f9502c821
0xffffff83bc2f3950: 0xffffff7f95035d93
0xffffff83bc2f39a0: 0xffffff8011727dac
0xffffff83bc2f3a20: 0xffffff801171d50d
0xffffff83bc2f3c10: 0xffffff8011715ad3
0xffffff83bc2f3f30: 0xffffff801170aefa
0xffffff83bc2f3f60: 0xffffff8011a29ac1
0xffffff83bc2f3fb0: 0xffffff80115efa36
Extensions of core in backtrace:
com Apple.filesystems.afpfs (11.0) [0CD2CFC3-9E8A-3627-94FA-9BBAF7577FA4] @0xfffff f7f9500f000-> 0xffffff7f95062fff
dependency: com.apple.security.SecureRemotePassword (1.0) [3E335294-B4F5-320 c-B431-A16D53C3EE 29]@0xffffff7f94ffd000
Corresponding to the current thread BSD process name: fseventsd
Mac OS version:
15 C 50
Kernel version:
15.2.0 Darwin kernel version: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64
Kernel UUID: 17EA3101-D2E4-31BF-BDA9-931F51049F93
Slide kernel: 0 x 0000000011200000
Text of core base: 0xffffff8011400000
Text __HIB base: 0xffffff8011300000
Name of system model: iMac17, 1 (Mac-B809C3757DA9BB8D)
Availability of the system in nanoseconds: 58241635953938
last load kext to 8021022451320: com.parallels.kext.vnic 11.1.2 32408 (addr 0xffffff7f950be000 size 32768)
Finally unloaded kext to 8116132315148: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f95063000 size 32768)
kexts responsible:
com Parallels.kext.vNIC 11.1.2 32408
com.Parallels.kext.netbridge 11.1.2 32408
com Parallels.kext.Hypervisor 11.1.2 32408
com Parallels.kext.USBConnect 11.1.2 32408
com Parallels.virtualhid 1.0.3 3
com Parallels.Virtualsound 1.0.36 36
com.promise.Driver.STEX 5.2.10
com Apple.filesystems.smbfs 3.0.0
com Apple.filesystems.afpfs 11.0
com Apple.NKE.asp - tcp 8.0.0
com.apple.driver.AppleTopCaseHIDEventDriver 86
com.apple.driver.AppleHSBluetoothDriver 86
com Apple.filesystems.autofs 3.0
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AGPM 110.20.21
com.apple.driver.ApplePlatformEnabler 2.6.0d0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 272.51.3
com.apple.driver.AppleGraphicsDevicePolicy 3.7.7
com.apple.driver.AppleHDA 272.51.3
com.apple.driver.AppleUpstreamUserClient 3.6.1
com Apple.Driver.pmtelemetry 1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.kext.AMDFramebuffer 1.4.0
com.apple.driver.AppleIntelSKLGraphics 10.1.2
com.apple.iokit.IOBluetoothSerialManager 4.4.3f4
com.apple.driver.AppleSMCLMU 208
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4
com.apple.AMDRadeonX4000 1.4.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelPCHPMC 1.0
com.apple.driver.AppleMCCSControl 1.2.13
com.apple.kext.AMD9000Controller 1.4.0
com.apple.driver.AppleIntelSKLGraphicsFramebuffer 10.1.2
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.AppleThunderboltIP 3.0.8
com.apple.driver.AppleThunderboltUTDM 3.0.0
com.apple.iokit.SCSITaskUserClient 3.7.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 38
com.apple.driver.AppleUSBODD 3.7.1
2.8.5 com.apple.iokit.IOAHCIBlockStorage
com.apple.iokit.AppleIntelI210Ethernet 2.2.1b3
com.apple.driver.AppleSDXC 1.7.0
com.apple.iokit.AppleBCM5701Ethernet 10.1.12
com.apple.driver.AirPort.Brcm4360 1020.17.1a1
com.apple.driver.AppleAHCIPort 3.1.8
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 4.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 4.0
com.apple.driver.AppleAPIC 1.7
com Apple.NKE.applicationfirewall 163
com Apple.Security.Quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.security.SecureRemotePassword 1.0
com.apple.driver.AppleHIDKeyboard 181
com.apple.driver.AppleMultitouchDriver 304.10
com.apple.driver.AppleHIDTransport 5
com.apple.driver.IOBluetoothHIDDriver 4.4.3f4
com Apple.kext.Triggers 1.0
com.apple.driver.DspFuncLib 272.51.3
com.apple.kext.OSvKernDSPLib 525
com.apple.iokit.IOSurface 108.0.1
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4
com.apple.driver.AppleGraphicsControl 3.12.6
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOBluetoothFamily 4.4.3f4
com.apple.driver.CoreCaptureResponder 1
com.apple.driver.IOPlatformPluginFamily 6.0.0d7
com.apple.driver.AppleHDAController 272.51.3
com.apple.iokit.IOHDAFamily 272.51.3
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.14d1
com.apple.driver.AppleSMC 3.1.9
com.apple.kext.AMDSupport 1.4.0
com.apple.AppleGraphicsDeviceControl 3.12.6
com.apple.iokit.IOAcceleratorFamily2 203.14
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.14d1
com.apple.driver.AppleThunderboltEDMSink 4.1.1
com.apple.driver.AppleThunderboltDPInAdapter 4.1.3
com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3
com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3
com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1
com.apple.driver.AppleUSBAudio 302.15
com.apple.iokit.IOAudioFamily 204.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.CoreStorage 517.20.1
com.apple.driver.usb.AppleUSBHub 1.0.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7
com.apple.iokit.IOBDStorageFamily 1.8
com.apple.iokit.IODVDStorageFamily 1.8
com.apple.iokit.IOCDStorageFamily 1.8
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7
com.apple.iokit.IOUSBMassStorageDriver 1.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7
com.apple.driver.AppleThunderboltNHI 4.0.4
com.apple.iokit.IOThunderboltFamily 5.1.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 1110.26
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com Apple.Driver.corecapture 1.0.4
com.apple.driver.AppleUSBMergeNub 900.4.1
com.apple.iokit.IOAHCIFamily 2.8.1
com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1
com.apple.driver.usb.AppleUSBXHCI 1.0.1
com.apple.iokit.IOUSBFamily 900.4.1
com.apple.iokit.IOUSBHostFamily 1.0.1
com.apple.driver.AppleUSBHostMergeProperties 1.0.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com Apple.Security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 417.1
com.apple.iokit.IOStorageFamily 2.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 4.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com Apple.KEC.pthread 1
com Apple.KEC.corecrypto 1.0
Panic (CPU 6): Processor is not responding (this CPU did not recognize interruptions) TLB status: 0x0
RAX: 0X00000000000002FF, RBX: 0XFFFFFF807244AA08 RCX: 0 X 0000000000000001, RDX: 0X00000000000034F8
RER: 0XFFFFFF803AD5B6B8, RBP: 0XFFFFFF803AD5B720, IHR: 0 X 0000000000000002 RDI: 0XFFFFFF807244AA0A
R8: 0X000000000098923D, R9: 0XFFFFFF80515FD8C8, R10: 0 X 0000000000000000, R11: 0X000034F84CC02E70
R12: 0XFFFFFF807244AA0A, R13: 0XFFFFFF8011C2CE90, R14: 0XFFFFFF807244AA0A R15: 0 X 0000000000000001
RFL: 0 X 0000000000000086, RIP: 0XFFFFFF80115C3D3D, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010
Backtrace (CPU 6), frame: return address
0xffffff83af0a9f80: 0xffffff80115d08cf
0xffffff83af0a9fd0: 0xffffff80115ef3f9
0xffffff803ad5b720: 0xffffff7f9502c815
0xffffff803ad5b950: 0xffffff7f95035d93
0xffffff803ad5b9a0: 0xffffff8011727dac
0xffffff803ad5ba20: 0xffffff801171d50d
0xffffff803ad5bc10: 0xffffff8011715ad3
0xffffff803ad5bf30: 0xffffff801170aefa
0xffffff803ad5bf60: 0xffffff8011a29ac1
0xffffff803ad5bfb0: 0xffffff80115efa36
Extensions of core in backtrace:
com Apple.filesystems.afpfs (11.0) [0CD2CFC3-9E8A-3627-94FA-9BBAF7577FA4] @0xfffff f7f9500f000-> 0xffffff7f95062fff
dependency: com.apple.security.SecureRemotePassword (1.0) [3E335294-B4F5-320 c-B431-A16D53C3EE 29]@0xffffff7f94ffd000
Corresponding to the current thread BSD process name: fseventsd
panic (the appellant 2 cpu 0xffffff80115b01fa): "TLB invalidation IPI timeout:" "CPU has not responded to interruptions, on which the bitmap of the CPU: 0 x 50, accused of receiving NMIPI: orig: 0x0, now: 0x2"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.20.55/osfmk/x86_64/pmap .c:2594 ' "."
Backtrace (2 CPU), Frame: Return address
0xffffff803ada3360: 0xffffff80114de792
0xffffff803ada33e0: 0xffffff80115b01fa
0xffffff803ada3480: 0xffffff80115b705b
0xffffff803ada3570: 0xffffff80115b7d86
0xffffff803ada35e0: 0xffffff8011563da5
0xffffff803ada36f0: 0xffffff801155934c
0xffffff803ada3720: 0xffffff8011554813
0xffffff803ada3750: 0xffffff80114e814d
0xffffff803ada3770: 0xffffff7f9503791c
0xffffff803ada3d20: 0xffffff801170cd32
0xffffff803ada3de0: 0xffffff80117188bc
0xffffff803ada3f30: 0xffffff801170d187
0xffffff803ada3f60: 0xffffff8011a29ac1
0xffffff803ada3fb0: 0xffffff80115efa36
Extensions of core in backtrace:
com Apple.filesystems.afpfs (11.0) [0CD2CFC3-9E8A-3627-94FA-9BBAF7577FA4] @0xfffff f7f9500f000-> 0xffffff7f95062fff
dependency: com.apple.security.SecureRemotePassword (1.0) [3E335294-B4F5-320 c-B431-A16D53C3EE 29]@0xffffff7f94ffd000
Corresponding to the current thread BSD process name: find
System profile:
Graphics card: AMD Radeon M395X, AMD Radeon M395X, PCIe, 4096 MB R9 R9
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x14A), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)
Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports
PCI card: pci105a, 8760, controller RAID, Thunderbolt@10,0,0
PCI card: pci1b73, Thunderbolt@196,0,0 1100, USB eXtensible Host Controller.
PCI card: ethernet, Ethernet Controller, Thunderbolt@195,0,0
PCI card: pci1b21, 1142, expandable USB Host Controller, Thunderbolt@16,0,0
PCI card: pci1b21, 1142, expandable USB Host Controller, Thunderbolt@15,0,0
PCI card: pci1b21, 1142, expandable USB Host Controller, Thunderbolt@14,0,0
PCI card: pci1b21, 1142, expandable USB Host Controller, Thunderbolt@13,0,0
Bus crush: iMac, Apple Inc., 28.1
Lightning device: Pegasus series R, Promise Technology, Inc., 1: 22.2
Lightning device: Thunderbolt 2 Express Dock HD, Belkin International, Inc., 3, 25.1
Memory module: DIMM0/0, 8 GB DDR3, BANK 1867 MHz, 0x80AD, 0x484D54343147533642465238412D52442020
Memory module: DIMM1/0, 8 GB DDR3, BANK 1867 MHz, 0x80AD, 0x484D54343147533642465238412D52442020
Memory module: DIMM0/1, 8 GB DDR3, BANK 1867 MHz, 0x80AD, 0x484D54343147533642465238412D52442020
Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1867 MHz, 0x80AD, 0x484D54343147533642465238412D52442020
USB device: USB 3.0 Bus
USB device: 4-port USB 3.0 Hub
USB Device: USB Bluetooth host controller
USB device: FaceTime HD camera (built-in)
USB device: Apple USB SuperDrive
USB device: USB 2.0 Hub
USB device: MB86C311
USB device: Laptop SSD
USB device: USB 2.0 Hub [MTT]
USB device: Wacom Wireless Receiver
USB device: USB 3.0 Bus
USB device: SSD laptop T1
USB device: DTHX Predator
USB device: USB audio CODEC
USB device: USB 3.0 Bus
USB device: WorkflowD512
USB device: USB 3.0 Bus
USB device: WorkflowD512
USB device: USB 3.0 Bus
USB device: WorkflowXR1
USB device: USB 3.0 Bus
USB device: WorkflowCFR1
Serial ATA Device: APPLE SSD SM1024G, 1 TB
Network service: Wi - Fi, AirPort, en1
Model: iMac17, 1, IM171.0105.B05 of BootROM, 4 processors, Intel Core i7 4 GHz, 32 GB, MSC 2.34f2
Even if you have installed a third-party software ('Parallels' and a 'Promise' device driver) who is likely to cause a kernel panic, the kind of panic you are most likely caused by a hardware failure. I suggest that you take the machine to an Apple Retail Store or other provider of services allowed for a stable service and guaranteed, if necessary.
-
How to display the current Options in the window treatment result
Hello
I am preparing customized results processing plugin in TestStand. TS help I can use Base.OptionsDescriptionExpression to set the Options column in the window treatment result. In this column may consult the summary current settings. I want to display the path of the directory of report in this document, as in the sample report in Simple text format. Unfortunately I'm not able to do this...
I use FileGlobals.ModelPluginComponentDescription.Default.InitializationExpression to set default report path, in plugin options, by using the following expression:
#NoValidation, ModelPlugin.PluginSpecific.Options.ReportOptions.Directory = RunState.Engine.GetTestStandPath (TestStandPath_Public) + "\\Reports.
Then I changed FileGlobals.ModelPluginComponentDescription.Default.Base.OptionsDescriptionExpression into #NoValidation, ModelPlugin.PluginSpecific.Options.ReportOptions.Directory which should contains the default path for the report estimated at InitializationExpression and this directory should be displayed in the column of the Options in the window treatment result.
I don't know what Miss me, because it doesn't work. When I use the breakpoint in model Plugin - configure the Standard Options to see the Parameters.ModelPlugin.Base.OptionsDescriptionExpression, it displays:
#NoValidation, / / disable validation because higher level ModelPlugin property exists only when running
"
" So it seems that my Default.Base is not copied in Parameters.ModelPlugin.Base
So how do you view the current Options (at least report the path) in the window treatment outcome? Help, please
OK, I think what is happening. FileGlobals.ModelPluginComponentDescription.InitializationExpression is evaluated when I add the new instance of the result new treatment-> insert plugin. Then each window treatment of the result of time shows that Parameters.modelplugin.base.optionsdescriptionexpression is evaluated to update the Options column.
-
Get the current name of the Run Script
Hello
I'm looking for the name of the current script that runs in DIadem.
So I would like to call a script, and then everything is running I would record the name of the script (file name on disk) a text box on a report that I am generating.
I know how to pass values to the report that I am not sure to get the name of the script that runs underway.
Thank you
Hi Tim
You can use the CurrentScriptName and CurrentScriptPath variables.
I hope this helps.
Winfried
-
Original title: 2 numbers do not know if they are related
I have 2 questions and I don't know if they are related. Several days ago I was doing some cleaning and uninstalling programs to free up space. I don't know what I started with, but it seemed to go ok. However, after all that I've tried to uninstall gave me the message: Please wait until the current program has finished uninstalling or one. I rebooted the computer more than once during this period, but it still says that.
Then my internet explore has stopped working just for 2 or 3 days. I've been using google chrome to access things, but it is rather slow.I ran repeated virus and malware scans my norton security and the microsoft Web site, and all said I am clean.Yes, it's windows 7 I appreciate the suggestions, but the problem was that he wouldn't LET me not uninstall anything. He gave me the waiting message please do anything, and he's not missing if I stopped and restarted. Finally, I gave up. I saved my files to my external hardrive and just do a full recovery of the computer. He solved the problem of installed programs and the internet problem explore both, although I hoped it would avoid going that drastic.
-
Possible to customize 'Size of the Scan' fall into the HP scanning application?
Hello community HP,.
I use an OfficePro 8600.
HP application scanning has a scan drop-down size that offers you a number of choices, but also a choice custom type dimensions customized to your paper/photograph. I performed the task of digitization of photographs of family a lot of old of the life of my parents and grandparents. It would be convenient that I could customize options in the menu size Scan drop-down on the HP scanning application to be sizes that I have to go quickly. Currently, I have to go several times in the custom element to type the dimensions directly when I come across a picture of a different size.
Anyone know if this is possible? I am comfortable working with the registry of Windows and system files, if necessary. Thank you.
Kind regards
Sean
Hello
No - you can do this automatically UNLESS you can build a sensor to tell the size of the originals, BUT you can create the tamplates (called shortcuts) and save them. The next time you select a shortcut and it will scan you want, no need to enter again the options. There are some pre-built in there, you can create more of your need.
Kind regards.
-
ENVY 100 D400: Unable to save the files scanned after Windows update 10.
After scanning the computer, I click on save button with one of two results. Sometimes nothing at all happens. Other times, the computer stops responding.
Probably, you need to delete the current program printer and install a new copy of the software full functionality.
HP ENVY 100 e - All - in - One Printer - D410a
Full software features:
File name: LSD410_1315 - 1.exe
Maybe you are looking for
-
Something wrong with my HP laptop keyboard. When I want to type in a s, he returned in place of the ctrl + s and don't did me not s. When I want to type a capital letter and hold the SHIFT key shift, tap an x instead. What should I do?
-
Satellite A300D-13Y - extreme overheating issues?
Hello world I have a Toshiba A300D Y13 Satellity system since mid-2008.This is the AMD platform with the graphics card of Turion 64 X 2 TL - 60 & ATI Radeon HD 3650. Recently, he began to fade. First the system began to slown down extremely after awh
-
Copy a shortcut to a function that is integrated into a range of different
I often find myself right-clicking on the output of a table and you're looking for function "Empty array?", even though I know he lives in the range of comparison, not the Array range. Even with strings. I already know how to edit palettes and add my
-
Bio shock 2: freezes when I login
original title: freezes Whenever I try to connect it crashes just straight up. This has worked great for several months, but now when I try to play bio shock 2 it trys to connect and crashes.
-
Inadvertently, I moved my cursor using the touchpad and it decreased my policy and I can't get it for a larger size. my daughter thinks it has something to do with scrolling