Cisco 5300 MCU failed to register with the SIP registrar

Similar Questions

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• Empty blackBerry Smartphones host routing table, will not register with the network.

  I want to apologize if I put this post in the wrong thread.

  So here's the question. I sent a request to my service provider to upgrade several SIM's have Blackberry service added to them. I asked specifically for them to make sure that the SIM card have been set to BES not BIS. The first SIM card I try to register with the network does the following for me. The phone, before I save it with the BES server can call and surf the internet. Once I have sync the phone with the company's server and I go back outside to check on her send and receive these emails, I try to control the internet and it says that the service is not available. I have 3G (Yes capitol) service and I can make phone calls. The host routing table is empty and when I try to save the phone it just says 'sent message' but I never receives the roads. I wiped the phone and repeat the steps with the same result. I contaced the carrier because all the Google search I did pointed to the carrier but they swear the correct plan is attached. Please if anyone can help me it would be greatly appreciated.

  Hello and welcome to the community!

  In fact, he should persist with the carrier. But first try to remove this BB to your BES, then by the ResetToFactory WIPE to remove the it strategy. Then run everywhere with the BB, ensuring that you can do all the activities of BIS (including filling of the HRT) before activating the BES. If it continues to fail, then you must climb the carrier and BIS get work before you activate BES.

  HRT and the functions of BIS should not be affected by BES, unless there is something in your it strategy that does. It is not very likely but it should impact the devices ALL active BES, not one only.

  Good luck!

• Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  It seems that your version is not the latest.

  Check help / about... what version it reads.

  It should be 2015. (9.2.0 build 41)

  Otherwise, please update your version via app updates... or cloud in respect of aid.

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.

• Hello! I've got CS3 Design Standard - real records and certificate of software license. It was installed on my laptop that crashed and could not be uninstalled. I have now installed on my new MacBook Pro, but can't get it registered with the

  Hello! I've got CS3 Design Standard - real records and certificate of software license. It was installed on my laptop that crashed and could not be uninstalled. I have now installed it on my new MacBook Pro, but can't get it registered with the serial number. Is it because it has not been uninstalled on the previous laptop? What should I do now? THX!

  Maybe this can help someone else...  I had to simply properly uninstall CS3 and reinstall again after that.  I think what he sort!  I also remember having a similar problem with the Mac at work a couple of years back.  Not sure if it is the same for CS5/CS6.  Here is a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS.  I'm on OS X 10.9.2 but it works beautifully.  Remove from Creative Suite 3 and CS3 products

• BlackBerry smartphone Podcasts downloads fail more often with the app native podcast

  I always use a Pearl 3G with OS 6. I use it every day to listen to podcasts and books while I'm working. The last few months I had several podcast subscriptions fail to download some episodes. The subscription xml links are still good for some of them that I sometimes get the automatic download of a new episode. When I go on ' restart any missed "they try again several times and eventually fail without any error messages so I can't understand what is happening. What that this be amended to how work year last RSS podcast feed?

  I think I use version 1.6 of podcast. It is what came with the operating system, and then put through the appworld and did not have an update for years.

  My memory card is not full.

  I tested for problems of connection and insured that I was connected several times in a new attempt to download has failed.

  More big podcasts of other links rss download, so I don't think it's a size cap.

  Is it possible the length of file name or characters are a problem?

  Edit, for example, if someone listens to IdleThumbs.net, I get many episodes ignored their RSS feeds in particular.

  So, I went from Mobilicity as a supplier to the WIND and now download all my podcasts. At my data provider blacken my downloads somehow? Looks suspicious, even if there was swap wireless spectrum goes on in time between providers of cellular services, which is the reason why I've switched back to wind in the first place (and because Rogers bought Mobilicity).

  I downloaded 1.2 GB of podcasts delayed the day after the passage of data providers until my battery ran out.

• WHERE to download and how to install windows 8 oem and register with the key from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  See here, make sure you download the correct edition:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• Fails at 1% with the error "FAILED: an error occurred during conversion:" "2338' platform-specific error".

  I'm trying to convert a physical Windows Server 2003 Web Edition SP2 with converter (v 5.1) and each time it fails with the error "FAILED: an error occurred during conversion:"2338 ' platform-specific error.

  Some errors in the paper seem to point to a hard disk problem but I defragment the disk and then ran a chkdsk and the disk seems good.

  I appreciate all help.

  Your physical machine cannot access ESX:

  2013-05-25 T 11: 07:26.602 - 05:00 [03816 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.1.2.18:902

  You must allow the connection between the physical machine and ESX @ port 902.

  HTH

• 9i database to register with the 10g rman catalog

  I want to know if something prevents a 9i database to record with the catalog rman 10g server?. Any ideas or links to popular docs
  
  My situation
  
  target db - 9204
  target rman executable used for backup - 9204
  Catalog RMAN - 10204
  version of RMAN database - 10204
  without auxiliary basis or duplicate at this time.
  
  Can I now register and start taking backups?
  
  Published by: user13296481 on August 18, 2010 12:11

  The version of the recovery catalog schema must be greater than or equal to the version of RMAN client.

  http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28273/compat003.htm

  Version of the catalog RMAN - 10.2.0.2

  Target - 9.2.0.4 database

  You can register now and start the backup.

  Concerning
  Asif Kabir

  Handle: jsampath
  Status level: Beginner
  Join date: July 9, 2010
  Messages total: 3
  Total Questions: * 3 (3 pending) *.

  -Mark your useful post as correct/helpful and close all threads.

• The Roboform plugin still fails to work with the new update?

  RoboForm has disappeared with the new update. I went back to the old version. WORKS very well...

  The latest version of RoboForm (7.6.7) is perfectly compatible with Firefox 8. Siber Systems generally offer an update within 24 hours otherwise before compatibility when an up-to-date browser. They also have live telephone support large if you have any questions.

• Fail to communicate with the controller of pump ISCO D series

  Hey everybody,

  I have an ISCO D pumps controller (which is connected to a syringe model 100DX ISCO pump) series I want to control using RS232 on Labview. I don't have their LabView Toolkit that Teledyne has mentioned in their technical Bulletin (TB06). In addition, I would like to automate my test, so using the Labview Toolkit will be not too useful.

  The problem I face is not being able to communicate with the controller via hyperterminal or LabVIEW.

  I ran their (mentioned in TB06) integrated series test and communicate as expected. I also tried to run their program remote pump (mentioned in technical Bulletin 19 of Teledyne - TB19) which seems to do what is expected as well.

  I tried to talk about using LabVIEW first using the vi that I joined, and I saw nothing on the buffer. So, I moved to hyperterminal.

  But when I try to send the command 'remote' listed in TB19, it doesn't seem to do anything. There is no answer on the hyperterminal.

  There is mention of a DASNET Protocol, and I found the .dll file that I also moved in my Windows System 32 folder. It did not work even after that too.

  I have attached TB06 and TB19. Let me know if you have other ideas how to do to test it.

  Please let me know if you need further information.

  Thank you

  Sandeep

  Hey everybody,

  After going through their best manual, I found the way to correctly send a frame. The manual at, www.isco.com/pcfiles/PartPDF/SL000004/UP00194U.pdf, section 7 specifically, it is intended.

  For the purposes of anyone who stumbles across this thread, here's an example.

  If you have your.

  Destination (the pump regulator) ID = 1

  the source of the (computer) message = 00

  and you try to send the message to DISTANCE that would turn the controller in "REMOTE" mode

  Then you would send '1R006REMOTE1B', where 1 is the ID of destination
  R is right to recognize the previous received message

  00 is the ID of the computer

  6 length of command

  "REMOTE" the command itself, must be uppercase

  Checksum 1 b (which changes with the command of course)

  And you can do the same thing in LabVIEW, you can enter '1R006REMOTE1B' in the VISA write while keeping everything else the same as the snapshot of the vi I sent previously.

  Dennis, actually do not have the CD itself, but I assumed, would nothing more than an executable since I downloaded the demo driver for LabVIEW (http://www.isco.com/products/appnotes.asp?PL=105 under utilities) pump. I am currently trying to locate the CD here at the lab, and I will update this thread if I find something useful.

  I guess that my problem has been resolved.

  Thanks for your input in this Dennis.

  Kind regards

  Sandeep

• Software BlackBerry Blackberry Link fails to communicate with the device

  I hope that there could be some additional elements that could help with a problem I've seen with BlackBerry link. We have a user who has three computers he uses to back up his passport for Blackberry (depending on its location at the time). A laptop has started to display the communication error, it is stated in the subject line. BlackBerry connection on two other devices have no problem of communication with the phone.

  The device works on OS 10.3.2.2474, although the issue does not appear to be tied to a software update. We confirmed that the user was able to save his device to the affected machine after it has updated to this OS level.

  Initially, when it connects the device to the computer, the BlackBerry Device Manager does not detect a connected device. After change of the cable USB and the realization of step 2 below, the Device Manager and link show the connected device. However, the link always displays the communication error. The user is a local administrator on the system.

  I tried the things:

  1. update to the latest version of link.

  2. retrograde to Blackberry link 1.2.3.56, which is the version installed on two systems of work.

  3 uninstalled link 1.2.3.56 and performed a manual cleanup of old files, such as noted in Blackberry KB35666 http://support.blackberry.com/kb/articleDetail?articleNumber=000035666&language=English, to delete the files from the driver to the previously installed version.

  4 reinstalled link 1.2.3.56, which gave me a perfect match for all the drivers on the affected system and two systems of work.

  5. manually created firewall rules that appear on work mDNSResponder.exe, nginx.exe and tunmgr.exe systems. The application for peermanager.exe rule created on an affected system.

  6a played with .NET. The system was originally installed 4.51. I uninstalled and installed 4.0 (which is the version required by the 1.2.3.56 link). Later, I've upgraded to .NET 4.52.

  7 off completely Windows Firewall and antivirus on the system. Neither touched the issue.

  8 connectivity test using another profile of Windows user on this system and later another device Blackberry OS 10. Reproduce the issue with the two tests.

  9 Ran through all the other suggested steps in the article noted in step 3. An oddity I noticed during these controls: under the Windows user profile, I am unable to ping the IP assigned to the device. This prompted the tests with the Windows Firewall and AV out. However, when we tested with a different user on the same system (with Firewall and AV) on profile, we are able to ping IP assigned to the device. This allows however for us to communicate with the device via link, however.

  Not to mention that the redefinition of the system (which, in my opinion, is far too radical to get this software to work), I hit a brick wall with items to check then. Has anyone else experienced this problem and it is resolved through a different way? Any comments would be greatly appreciated.

  Well, I guess everything he needed, it had happened to a point where I thought I was out of options. We finally got this device communicating by link.

  I had run across this article during my first troubleshooting http://support.blackberry.com/kb/articleDetail?ArticleNumber=000035829 and it is a problem, because we already had 4.51 .NET on the system and tried to reinstall it think.

  I went down the .NET 4.5 system, and of course link works again.

• Headers fail loading dimension with the contour fill utility.

  When I try to load a dimension with the contour fill utility I get the following error message in charge of contour newspaper.

  «Impossible to get analytical information and/or perform a data load: values of unrecognized column header, refer to previous posts.» (Note: column header values are case sensitive.) »

  Is there another newspaper, that I can go to in order to see what the value of the header is the cause of the problem?  The alternative is to remove a header at a time and try to make the charge, and since this dimension has more than one column, it would take a lot of time.  As a result a sample of my data file.

  Parent account, Alias: by default, operation, data storage, calculation re encoding, Type of account, balance time, value Skip, Data Type, Type of exchange rates, use 445, reports, Type of Plan (BUDGET), on the gaps Plan of aggregation (BUDGET), Type (BALSHT), aggregation (BALSHT), Source Plan Type

  Account, IncomeStatement, update, dynamic Calc, 0,.

  IncomeStatement, 300000, Net income, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  300000,310000, total income before taxes, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  300000,311000, income before tax from operations update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  310000,312000, another Exp (Inc), the update, the dynamic Calc, 0, expense, flow, currency, fees, 1, 0, +, BUDGET

  300000,320000, provision for income, dynamic update tax Calc, 0, expense, flow, currency, fresh, 1,-, 0,-, BUDGET

  320000,321000, costs of update, store, expense, flow, current taxes, currency, 1, 0, +, BUDGET

  320000,322000, deferred Taxes, update, store, fresh, flow, currency, charges, 1, 0, +, BUDGET

  300000,330000, minority interests, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  300000,340000, income from investment in Subs, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  300000,350000, back, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  311000,400000, the gross margin, update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  400000,410000, net income, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  410000,411000, gross, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  411000,411100, income from operations, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  411000,411200, BALSHTenue synergy, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  411000,411300, IC revenue, update, store, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  410000,412000, returns and allowances, update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  412000,412100, return on sales, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  412000,412200, discount sales, update, store, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  400000,450000, cost of sales, updated, dynamic Calc, 0, expense, flow, currency, fresh, 1,-, 0,-, BUDGET

  Try to run with running sec/n to validate and/m to generate headers. While doing this, you can also add a log location execption using /X. This will tell you what a question header.

  Review the generated header and examine the wrong header in the exception log.

  Concerning

  Celvin

  http://www.orahyplabs.com