Cisco Aironet 1700 unsupported in the IP 2.1.1

Cisco Aironet 1700 is not supported in PI 2.1.1; no idea if there is an update in the roadmap?

Thank you

 *** Cisco AP701E is not supported by Prime Infrastructure 2.1.1. Also, Cisco Aironet 1700 Series Access Points are not supported by Prime Infrastructure until Prime Infrastructure Release 2.2, which is yet to be released.

2.2 IP's schedule release any time December 2014 or 2015 January.

Tags: Cisco Network

Similar Questions

Cisco Aironet 1262N stuck during the startup process

I'm banging my head against the wall, trying to figure out why my AIR-AP1262N-A-K9 will start all the way. He'll get all the way to initiate interfaces and stop. I can never get to control the CLI. This is my first time with a cisco ap but everything I read it very easy sewing.

This unit from what I understand will work on its own with no controller. Therefore, it is called a "stand-alone" model Yet he seems to be looking for something to complete during the boot. Below the out put for starting. The last line is where it stops.

If anyone can help me I would be very happy.

WRDTR, CLKTR r: 0x8200083f 0x40000000
r RQDC, RFDC: 0 x 80000033 0 x 00000212

using the values from the eeprom

WRDTR, CLKTR: 0X8200083F 0X40000000
RQDC, RFDC: 0 X 80000033 0 X 00000212

MCNG ddr static values of the eeprom series
init done DDR

IOS Bootloader - start System.
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......
XMODEM file system is available.

DDR used values of the system serial eeprom.
WRDTR, CLKTR: 0X8200083F, 0X40000000
RQDC, RFDC: 0 X 80000033, 0 X 00000212

PCIE0: the connection is established.
PCIE0: VC0 is active
PCIE1: the connection is established.
PCIE1: VC0 is active
PCIE 64-bit devices
PCIEx: initialization done
flashfs [0]: 147 files, 7 folders
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 31739904
flashfs [0]: bytes used: 6435328
flashfs [0]: available bytes: 25304576
flashfs [0]: flashfs fsck took 9 seconds.
The system eeprom read cookie series... Fact
MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.
Error: Speed RGMII

The system has encountered an error during initialization
the Ethernet port.
The system is ignoring the error and continue to start.
If you stop the system startup process, what follows
orders will be re - initialize Ethernet, TFTP and finishing
loading the operating system software:

ether_init
tftp_init
boot

for 22 seconds
process_config_recovery: set the IP address and the default config 10.0.0.1
process_config_recovery: image recovery

PA:
WRDTR, CLKTR r: 0x8200083f 0x40000000
r RQDC, RFDC: 0 x 80000033 0 x 00000212

using the values from the eeprom

WRDTR, CLKTR: 0X8200083F 0X40000000
RQDC, RFDC: 0 X 80000033 0 X 00000212

MCNG ddr static values of the eeprom series
init done DDR

Normal running Memtest...
Past.
IOS Bootloader - start System.
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......
XMODEM file system is available.

DDR used values of the system serial eeprom.
WRDTR, CLKTR: 0X8200083F, 0X40000000
RQDC, RFDC: 0 X 80000033, 0 X 00000212

PCIE0: the connection is established.
PCIE0: VC0 is active
PCIE1: the connection is established.
PCIE1: VC0 is active
PCIE 64-bit devices
PCIEx: initialization done
flashfs [0]: 147 files, 7 folders
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 31739904
flashfs [0]: bytes used: 6435328
flashfs [0]: available bytes: 25304576
flashfs [0]: flashfs fsck took 9 seconds.
The system eeprom read cookie series... Fact
MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.
Error: Speed RGMII

The system has encountered an error during initialization
the Ethernet port.
The system is ignoring the error and continue to start.
If you stop the system startup process, what follows
orders will be re - initialize Ethernet, TFTP and finishing
loading the operating system software:

ether_init
tftp_init
boot

"Loading Flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1"...### ".
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
###############################################################################

File "flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1" uncompressed one
ND installed, point of entry: 0x4000
execution of...
ENET stopped

Legend restricted rights

Use, duplication, or disclosure by the Government is
subject to such restrictions as set out in paragraph
(c) Commercial - limited computer software
The rights to FAR clause 52.227 - 19 and subparagraph s
(c) (1) (ii) rights to technical and computer data
Clause of DFARS 252.227 - 7013 section software.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Friday, August 11, 11 02:07 by prod_rel_team

Proceed with the initialization of the system

Proceeding to unmask interrupts
Initialization of flashfs...
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......

flashfs [1]: 147 files, 7 folders
flashfs [1]: 0 orphaned files, orphaned directories 0
flashfs [1]: Total number of bytes: 31481856
flashfs [1]: bytes used: 6435328
flashfs [1]: available bytes: 25046528
flashfs [1]: flashfs fsck took 7 seconds.
flashfs [1]: initialization complete.
flashfs [2]: 0 files, directories 1
flashfs [2]: 0 orphaned files, orphaned directories 0
flashfs [2]: Total number of bytes: 11999232
flashfs [2]: used bytes: 1024
flashfs [2]: available bytes: 11998208
flashfs [2]: fsck flashfs took 1 seconds.
flashfs [2]: initialization complete... done Initializing flashfs.

Radio0 presents 8364B 8000 B8020000 0 B8030000 10
Present Radio1 8364B 8000 B0020000 0 B0030000 C
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.

This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at
[email protected] / * /.

processor of Cisco AIR-AP1262N-A-K9 (PowerPC460exr) (revision B0) with 81910 K/4
9152K bytes of memory.
Card processor ID FTX1716E2DN
PowerPC460exr CPU 666 Mhz, the 0x18A8 revision number
Last reset of tension
1 gigabit Ethernet interface
2 802.11 radios

32K bytes memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: 7 c: AD:74:93:36:BA
Part number: 73-12175-06
Kit numbered PCA: 800-32268-06
Revision number of PCA: B0
Serial number of PCB: FOC17106662
Top Assembly part number: 800-33866-02
Top of page the Assembly serial number: FTX1716E2DN
Top of page revision number: A0
Product/model number: AIR-AP1262N-A-K9

Press RETURN to get started!

* 00:00:09.481 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS t auto
is spent
* 00:00:09.490 Mar 1: * CRASH_LOG = YES

* 00:00:09.490 Mar 1: PCIE 64-bit devices
* 1 Mar 00:00:09.789: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
n level 4
* 1 Mar 00:00:10.088: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
n level 4
* 00:00:12.966 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
test successful Dot11Radio interface 0
* 00:00:15.649 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
test successful 1Base Dot11Radio interface Ethernet MAC address: 7 c: AD:74:93:36:
BA

* 00:00:56.377 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
up to
up to
ernet0, changed state down
* 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio1, changed state of a
dministratively down
* 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state of a
dministratively down
* 00:11:00.003 Mar 1: % CDP_PD-4-POWER_OK: full power - AC_ADAPTOR inline power s
ource
* 00:11:00.012 Mar 1: % SYS-5-RESTART: System restarted.
Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Friday, August 11, 11 02:07 by prod_rel_team
* 00:11:00.012 Mar 1: % SNMP-5-start COLD: SNMP agent on host ap undergoes a c
old beginning
* 00:11:00.994 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
State of GED until
* 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed down state
* 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed down state
* 00:11:11.956 Mar 1: % LINK-3-UPDOWN: Interface BVI1, changed State to down
* 00:11:12.957 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
State of GOL downstairs

What are your settings of the nec console?

You must be 9600, none, 8, 1 and flow controll set off to be able to interact with the CLI

HTH,
Steve

------------------------------------------------------------------------------------------------
Please don't forget to rate helpful messages and mark the questions answers

Aironet 1700 not directly connected to the cat 3650

I need to understand that if I have 2 AP (Aironet 1700) NOT physically ending with a Cisco switch 3650, the function of the 3650 wireless controller will be able to control and manage the Aironet 1700?

The Aironet will end in a SG300 and the SG300 ends to the 3650 (core switch). Termination of directly in the switch of the AP can be difficult because of the floor plan and the placement of the 3650, who sits in a corner of the office.

Thanks for any help!

Hi delphine,.

Indirectly mode pass through or connected access points are not supported on switch 3650. 3650 will always take the CAPWAP tunnel locally.

To make your 3650 manage your access point, you must physically end at 3650 of the AP.

Let me know if you have any questions or concerns.

Cisco Aironet 1830 disable broadcasting of the SSID

I recently bought a Cisco Aironet 1830 with the mobility Express version. installed 8.2.100.0. This unit is my controller and my only AP. I configured the device, but I can't seem to find a setting in the GUI or the CLI of the controller or AP disable broadcasting of the SSID. Can someone help with this?

Thank you

The CLI is available, the following command:

config ssid broadcast disable wlan where wlan id is the number of your wlan. If in doubt, do a show wlan summary which should give you this info, I hope.

Ric

Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?

Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?

I have (2) AIR-SAP2602I-A-K9, configured the same way.

on two different remote LANs.

They don't seem to be handing out addresses via DHCP.

{If I connect to a local network with another DHCP server}

wireless devices can obtain addresses

This another DHCP server on the LAN through the access point.}

I followed 12.4.25d. JA.cg.pdf

Configuration of the Access Point to provide the Service DHCP 5-22

---------|---------|---------|

e.g. 3444-RCS1-AN #show running-config

Building configuration...

version 15.2

3444-RCS1-YEAR host name

no ip Routing

USH - DM IP domain name

DHCP excluded-address IP 192.168.29.89

IP dhcp RCS1 pool

network 192.168.29.88 255.255.255.248

router by default - 192.168.28.1

Rental 1 0

interface BVI1

IP 192.168.28.211 255.255.254.0

no ip route cache

default IP gateway - 192.168.28.1

---------|---------|---------|

---------|---------|---------|

e.g. 3444-RCS2-AN #show running-config

Building configuration...

version 15.2

3444-RCS2-YEAR host name

no ip Routing

USH - DM IP domain name

DHCP excluded-address IP 192.168.129.81

IP dhcp RCS2 pool

network 192.168.129.80 255.255.255.248

router by default - 192.168.128.1

Rental 2 0

interface BVI1

IP 192.168.128.171 255.255.254.0

no ip route cache

default IP gateway - 192.168.128.1

---------|---------|---------|
```
Thats the DHCP Pool range 192.168.29.88 through 192.168.28.95
```
Well this will confuse your customers.

And this is NOT how to set up your "range". See below:

DHCP excluded-address IP 192.168.29.1 192.168.29.87

DHCP excluded-address IP 192.168.29.96 192.168.29.254

IP dhcp RCS1 pool

network 192.168.28.211 255.255.254.0

router by default - 192.168.28.1

Rental 1 0

Cisco Aironet 1131AG and measure access points to the power of the wireless signal?

/ * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

/ * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

We have about forty points of access Cisco Aironet 1131AG spread over four floors and they all have a static IP (BVI1) on the same SSID, customers will be on its own virtual local area network (dhcp on 3750 switch) and they use several channels (1,6,11). Cisco Wireless Control System is pending. This wireless network should support roaming for customers (there will be Wi - Fi tags of multiple AeroScout and wireless laptops). To measure the strength of the wireless signal and wireless coverage on each floor. My questions are:
1. How to measure the strength of the wireless signal: we must meet at least three APs available with signal excellent (I guess for the WCS needs that will determine the position of the client in the building)? We thought to use NetStumbler and a few laptops with wifi and measure as many points as we can as simpler thing. Or should we use something like Cisco Aironet Client adapters for our mobile phone and then use Cisco Aironet Client Utility (is it worth buying for our analysis and measurement)? Any other idea?
2. What signal level should we consider for a good wireless (dBm)?
3. That we should propose for authentication, authorization and management accounting? What happens to the roaming wireless? I did not quiteunderstand WCS, WDS and WLC-that should be used for above tasks?
Thanks in advance.

"Use the command on the AP" sh dot11 associations "will give you the clients associated with success. If you add the MAC address of the client at the end of the command, you will get detailed information. Look under "Signal Strength" and "Signal to noise". Under the strength of the Signal, you want a value of-75 dBm or lower (lower values the better). -76 dBm and is bad. Under Signal-noise, you want a value of 25 dBm or more (values higher the better).

To measure the strength of the signal, I use Airmagnet, but you can use Netstumbler or Cisco Wireless Site Survey.

Create the Pool DHCP on Cisco Aironet 1131AG

Hello

How to create a DHCP on a Cisco Aironet pool so that laptops could get an IP address from this range when connected?

I don't want to use DHCP on our servers because these laptops are to be on a separate network.

Just do not know what commands to use.

Thank you!

Hello

There is a nice step by step to configure the DHCP Service on the AP in this doc;

Configuration of the Access Point to provide DHCP Service

http://www.Cisco.com/en/us/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38adm.html#wp1090319

I hope this helps!

Rob

Thank you to support CSC helps Haiti

https://supportforums.Cisco.com/docs/doc-8895

https://supportforums.Cisco.com/docs/doc-8727

New Cisco Aironet 1602i is not broadcasting the SSID I place

New Cisco Aironet 1602i is not broadcasting the SSID I place

SSID I set up is not broadcasting, so I don't see the wireless network to choose and connect. On my laptop if I choose specify the name of the SSID then I am able to connect to the wireless network. I have only 1 Configuration SSID on the access point. Anyone know how to update the configuration for the SSID is broadcast?

The green light on the AP flashes and turns off about 3 seconds; is this normal or should it stays on all the time?

Current configuration: 1842 bytes

!

version 15.2

no service button

horodateurs service debug datetime msec

Log service timestamps datetime msec

encryption password service

!

host ap name

!

!

Pulse 9 logging console

enable secret 5 $1$ rrlE$ msWqu8CGY/tpDkgRAAAIe /.

!

No aaa new-model

no ip Routing

no ip cef

!

!

!

dot11 syslog

!

dot11 ssid Mi Casa

open authentication

authentication-key wpa version2 management

WPA - psk ascii 7 142017070F0C787B7579

!

!

Crypto pki token removal timeout default 0

!

!

username Cisco privilege 15 password 7 112A1016141D

!

!

Bridge IRB

!

!

!

interface Dot11Radio0

no ip address

no ip route cache

!

encryption algorithms aes - ccm tkip encryption mode

!

SSID Mi Casa

!

gain of antenna 0

STBC

beamform ofdm

root of station-role

Bridge-Group 1

Bridge-group subscriber-loop-control 1

Bridge-Group 1 covering-disabled people

Bridge-Group 1 block-unknown-source

No source of bridge-Group 1-learning

unicast bridge-Group 1-floods

!

interface Dot11Radio1

no ip address

no ip route cache

!

encryption algorithms aes - ccm tkip encryption mode

!

SSID Mi Casa

!

gain of antenna 0

DFS block 3 Strip

STBC

beamform ofdm

channel SFR

root of station-role

Bridge-Group 1

Bridge-group subscriber-loop-control 1

Bridge-Group 1 covering-disabled people

Bridge-Group 1 block-unknown-source

No source of bridge-Group 1-learning

unicast bridge-Group 1-floods

!

interface GigabitEthernet0

no ip address

no ip route cache

automatic duplex

automatic speed

Bridge-Group 1

Bridge-Group 1 covering-disabled people

No source of bridge-Group 1-learning

!

interface BVI1

IP 192.168.10.200 255.255.255.0

no ip route cache

!

by default-gateway IP 192.168.10.1

IP forward-Protocol ND

IP http server

no ip http secure server

IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

!

1 channel ip bridge

!

!

!

Line con 0

line vty 0 4

local connection

transport of entry all

!

end

Hi you must guest mode config on the ssid... Read this bud

https://supportforums.Cisco.com/docs/doc-5442

Sent by Cisco Support technique iPhone App

Only the needs of the Cisco Aironet 1550 series a WLC?

Hello

Nice day. I would like to ask if the Cisco Aironet 1550 series requires a controller to run. Note that the references SKU in this fomat AIR-CAP1552E-A-K9-AIR-CAP1552EU-A-K9. I noticed that on the autonomous access point there they keyword 'SAP' on its SKU while the controller based has "CAP". If the

Cisco Aironet 1550 Series needs a controller which controller should it be associated? (e.g. AIR-CT2500)

Thank you

It can work stand-alone image:

http://www.Cisco.com/en/us/partner/docs/wireless/access_point/iOS/release/notes/15.2_2_JB.html#wp355908

1550 relies on:

2500, 7500, 5508, WISM2,... .etc

check the release notes of the code controller that you have and you should be able to identify what is supported and what is not supported.

----------------------------------------------------------------------------------------------

Please ensure good answers to rate

Cannot turn off the LEDS on Cisco Aironet 1141

I am trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9. It is a standalone AP and the CLI I publish this command:

turn off the display of #led AP (config)

The light does not go out after you type this command. If I "run" it appears in the config so that the order has been accepted. Is there another way to turn off the LED? I'm under JA1 IOS Version 12.4 (21a).

If you have the AP 1141 under warranty, you can send an email to [email protected] / * / PA serial number and they can post you the picture ask you.

You want to say "Thank you"?
Ne. Just note the useful responses,
It is more useful than 'thank you'.

Cisco Aironet SAP1602E - changing open to WPA - PSK access remote (RAP and map)

I currently have a deployment of Cisco Aironet SAP1602E Wireless point to point bridge (bridge using RAP and card, root wireless and Non-Root Bridge) to expand a layer 2 VLAN from one building to the other. It currently operates uisng open authentication and encryption - and is administered remotely via the bridge of root, to get wireless (manage) the bridge Non-Root - RAP wireless remote.

Try to configure the PSK WPA2-PSK remotely via the GUI or CLI - first setup - I informed a similar error to her below indicating that:
```
Error: Key-management WPA is requried for WPA-PSK
```
Read around, it seems, there is a configuration-control problem, and that I need to specify the mode as WPA2-PSK first, before then being able to specify the PSK there instead of using. However, as soon as this mode is specified on RAP, my remote administration is broken - as probably the RAP try to use WPA2-PSK to look for a PSK, which has not yet been configured. Am I missing something obvious here, or is the order of operations of CLI (1] convert to WPA - PSK; (2] shared secret to apply PSK) as a migration from open to WPA2-PSK cannot be configured remotely (short of preparation of a startup-config; TFTPing presents more; and issuance of a 'reload' remote control)? Can someone please enlighten me as to what the logic is here - no doubt I should be able to specify a PSK first (fo without worrying if I use WPA, WPA2 or other), and then be able to specify that I want as the layer of encryption (WPA) to make use of this pre-parameter PSK? If it was a router, you don't can me to add something to the authentication key chain OSPF; before clarifying its use - why so different Aironet Wireless IOS?
You're right, and because you will have to enter several lines of configuration to switch to WPA2-PSK with AES didn't really matter; the AP would reset the radio anyway because you make changes related to the radio interface. It would be very useful that if Cisco router/switch IOS 'macro' feature available AP thus in changes like this, unfortunately this is not the case.

Start with the nonroot AP and make sure that the following lines are added to your configuration. If you add by the console, the order must be like that, do it by downloading a new configuration of booting with tftp, that it does not matter.

interface Dot11Radio0
encryption ciphers aes - ccm mode

SSID dot11 TEST
authentication wpa key management
WPA - psk ascii 0

Please rate helpful messages... :-)

Point of access Cisco Aironet 1200 series help

We have 4 Cisco Aironet 1200 Access Points and they are all set to authenticate with our RADIUS server. However, authentication is hooked and can't understand why. Does anyone have any knowledge/experience with Cisco Aironet 1200 Access Points configuration?

OK, I do not work with the GUI so although the memory is a little hazy but from the APs home page look on the left hand side and there is an option for something like "Software Setup" or something to that effect. You should be able to find the IOS version of here. This requires that you are indeed runnig IOS code. How old are these APs? If more than a few years ago (and perhaps even more recent) that they could very well be running VxWorks and then we are in a different ball game. If you see what I have described above and the homepage for the AP is often white with a bit of greenish-blue, bluish-green color then IOS, if it is more colorful, yellow stuff and VxWOrks.

I hope this helps. Let me know if you need anything that anyone else. I will try to answer as soon as POSSIBLE.

Cisco Aironet 1140 Standalone AP

Greetings. For some time I'm looking for bargains from a class wireless access point. I narrowed down it to the stand-alone Cisco Aironet 1140 (no controller). I'm no stranger to Cisco products. I worked with the routers, switches and firewalls Pix / ASA. However, I did not have the opportunity to work with their wireless access point I hope that someone here who has experience using these AP (more precisely the autonomous 1140), can provide information on the reliability and safety of these devices. Some of the features that I would like to have as Mgmt. Radio and Rogue AP Detection I see are only available on the controller base units. Do not have these features on the autonomous unit reduced its reliability and safety? It's for a small business and the budget does not drop to a controller at this time. Thank you!

The 1140's are a good choice for standalone 802.11n. Regarding reliability and safety, it would be identical to a lightweight AP. you can use different types of encryption as well as using 802.1 x. You will not not reliable detection functions or management of radio since these are autonomous.

Thank you

Scott Fella

Sent from my iPhone

Stand-alone configuration of Cisco Aironet 700i

Hello

I'm well aware new products Cisco. So please forgive my basic questions.

I have Cisco Aironet 700 series AP(AIR-SAP702I-Q-K9). I don't have a controller. I need to set this up as standalone access point.

I tried all the basic steps and tried to activate the two radios, but no luck. Anyone can guide me please on how to configure the AP.

I use web access to configure the AP.

Help, please

Thank you

Sagar

Hi Sam,

Please check these messages to set up autonomous AP.

https://rscciew.WordPress.com/2014/05/24/single-SSID-configuration-on-au...

https://rscciew.WordPress.com/2014/05/24/multiple-SSID-configurations-on...

Concerning

Remember messages useful rates

Cisco Aironet autonomous 1602i

I'm having a difficult time linking the stand-alone Cisco Aironet 1602i access point to my network.

How to connect it to the network so that when I try to connect to the AP via a wireless device, I see the SSID?

Thanks, let me know.

Dan

You have a guide that your help? If this isn't the case, then take a look at this:

https://supportforums.Cisco.com/docs/doc-16087

Here are several example guides:

http://www.Cisco.com/en/us/products/HW/wireless/ps4570/prod_configuration_examples_list.html

Thank you

Scott

Help others by using the rating system and marking answers questions as 'response '.

Cisco Aironet 1700 unsupported in the IP 2.1.1

Similar Questions

Maybe you are looking for