Aironet 1700 not directly connected to the cat 3650

Similar Questions

• to reach a server on a VLAN that is not directly connected to the inside interface

  scénarion

  PIX 515

  6506 core with VLAN A, B, c. (intervlan routing is ok)

  vlanC is directly connected to the inside interface of the fw

  question

  How a crowd outside could reach a server ServerA on vlanA.

  Hello

  Concerning Point 1, Yes if the roads required for networks connected inside the network is done on pix.

  Concerning Point 2, if the IP address that you use within the network is routable (public IP), the command you gave will work. The command indicates that when 10.10.1.10 inside the network host wants to go outside the network, use the same IP address. Because NAT does not occur, the actual address of the server presents itself as the visible address and the address of the host. So if the IP address you specify is not a public IP address, outside world can't access.

• Drivers to be used on networked computers that are not directly connected to the HP Laserjet M1536dnf MFP

  Hi, I had problems connecting to computers on the network for printer. The printer is HP LaserJet Pro M1536dnf MFP. The computer that is connected to the printer directly via USB is fine. I downloaded solution complete driver installation on the site of hp, them and everything's fine. the problem is with the computers on the network, they cannot detect even the computer to add printer. And I have enabled file sharing and printer sharing advanced options of sharing on all computers. I also tried to install the same drivers I used on the local computer on the network computers, but its does not work. Please kindly advise me on which particular driver should I use or the solution.

  for this one, there was a simple solution... I forgot one small thing. After the installation of the complete solution from hp printer drivers on the computer connected to the printer via the usb port you then go to control panel > view devices and printers > click with the right button on active printer installed > printer properties > sharing > click on the list to the Director. that allows other computers on the network to view the printers.  was a bit stupid coz the solution was so simple.

• GPO applied to laptops when not directly connected to the network?

  OK, I have a question that should be easy.

  Are Group Policy objects applied even when a computer (such as a laptop) is not connected to your internal network?

  So if I had a laptop that is used normally on my internal network, and then I bring home, Group Policy objects that affect the laptop when I am connected internally, still influence the laptop when I am at home?  Thank you!

  WJ

  To be honest, you will get a more complete answer on the Technet site.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• VPN access to the not directly connected networks

  Hello

  I have a 5510 which is used for Client VPN access and there is something simple that I can't work.

  The VPN part works very well with AAA on a CBS.

  But what does not is access to networks that are not directly connected to the inside interface.

  That is to say the VPN users can connect to the network within the Interface (say 192.168.0.0/24) but not a 10.0.0.0/8 network which is connected through 192.168.0.1 router.

  I have the static routes in Routing and firewall all showing the way back to the firewall on all the other networks, but I don't get more far the 192.168.0.1 router...

  I use split tunneling and pass all of the private over the VPN - internet networks is used through the own local access to clients.

  Can someone help me out here?

  Thank you.

  Fraser

  PS: have the same type of access on a 7206VXR and soft, everything can be consulted and which is necessary - but I would like to move this service to the ASA.

  Fraser

  I don't understand the ASDM parts as you suggest. The code would be great.

  I would also recommend control ACL applied to the inside interface (if any) that it allows traffic as

  inside_access_in list of permitted access 10.0.0.0 255.0.0.0 vpnsubnet vpnnetmask

  If still no joy, attach your config sanitized, would be useful for me to diagnose.

  Concerning

• Internet does not connect unless it is directly connected to the computer

  This problem occurred yesterday.

  Internet has suddenly stopped working. Things were going to turn power off, then on and distributed. I did check the lights on the modem and the router, but they were all working well. I have plugged on both computers. This does not solve it. I called Charter to see if there was a failure. Unfortunately, it's a message auto troubleshooting which I have materialized with. He had me hang my modem directly to my computer. This solved my problems of the internet.

  I went to sleep for the night in the hope that the internet, or what the question was, would fix itself. He did not. The internet still works only if it is directly connected to the computer.

  There are other people who need to use the internet here. (Invoices, work schedules and other) So maybe it's very much a problem. Any other computer or phone, will work in the House.

  What is a router problem or a cable, or...?

  If your connection works when you plug the modem but not through the router, this indicates a problem with the router.   This could be a hardware failure or a configuration problem.  A problem with the cable between the modem and the WAN port on the router is possible, but unlikely.  It wouldn't hurt to check if she.  Most routers have a reset button recessed.  I suggest that you reset the router and reinstall as if new.  If this fails, you probably need to replace the router.

  Depending on your technical knowledge, you can also log in to the router and check the status information.

• Direct connection to the view Agent Linux?

  Is there an implementation linux plugin for direct connection from the view of the PicoIP client (I use VMware View on Mac) on a Linux desktop?

  I just wanted to put in place a set of virtual machines Linux to be accessible by customers to view, Mac. Also intend to do not use a view connection server. I installed a virtual machine to test with Ubuntu top end and configure the Agent as well.

  Direct connection is not supported. You must configure a login server in your environment.

• "Direct connection to the desktop" and external clients

  Hi all

  I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.

  I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.

  my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.

  When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?

  TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT

  any ideas?

  Thank you

  Ming

  In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• You are not currently connected to the Oracle BI server

  Hi I am facing problem while that connection in the page of answers... Here is the message I get... Please someone help, what could be the matter, thank you

  	You are not currently connected to the Oracle BI server. If you have already logged in, your login may have expired, or a communication or a server error occurred. To reconnect, click here. If the problem persists, please contact the site administrator. »

  Hi Ram,

  My question was resolved, it happened because of OPMN services are low.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• Flash Player is not to connect to the server policy file - still gives SecurityError #2048

  Hello

  I'm having a weird problem.

  Here's the situation:

  * I have a server that is running at http://192.168.0.179 . It serves as a file in flash, WebSocketMain.swf (of https://github.com/gimite/web-socket-js), who tries to make a socket connection to 192.168.0.179:5000.

  * I have a socket policy file server clocked at http://192.168.0.179:843 .

  * It works fine on the machine the server is running on (on OS X). Flash connects to the server policy files and on the server on port 5000.

  * However, on a Windows (64-bit) machine on the same network (192.168.0.175), running Flash 10.3/11.2/11.3 (and in the two Chrome/IE9), I get the following in the JS console error:

  LOG: Active [Websockets] Debug

  LOG: File [Websockets] strategy: xmlsocket://192.168.0.179:843

  [Websockets] Unable to connect to the Server Web Socket ws://192.168.0.179:5000/websockettest (SecurityError: Error #2048: security sandbox violation: failed to load http://192.168.0.179/assets/flash/WebSocketMain.swf )

  data from 192.168.0.179:5000.) Make sure the server is running and the policy file for the Flash shoe is placed correctly

  LOG: [Websockets] closed

  * I tried to modify WebSocketMain.swf to call Security.loadPolicyFile explicitly and not, but in both cases Flash Player will not even connect to the policy to 192.168.0.179 server. So it does not even attempt to read the policy file, yet still get the SecurityError.

  * 192.168.0.179:843 is opened from the machine.175. I can connect via a client Terminal Server (e.g. PuTTY) and receive the policy without problem file. However, FP simply does not want to connect.

  * I tried Security.allowDomain("*") and everything. Still nothing.

  * I tried to change the URL to which public Service will connect to (which is served by the web server) to 192.168.0.179:80. Nothing. 192.168.0.179:10000 does not work either. Even 127.0.0.1 and localhost does not work.

  I have more suggestions. This could be the cause? Why won't even try FP to connect to the policy server?

  Found the problem: mms.cfg had an entry saying DisableSockets = 1, which caused the security error.

• HP Officejet Pro 8610: printer directly connected to the Internet

  I'm trying to register for the HP ink cartridges.  The application calls a code to write on request.  However, the printer tells me that Web services are not enabled on my printer.  How can I connect a printer directly to the Internet.  I use a USB cable to connect the printer to my laptop.  Can someone help me so that I can complete the application of the ink?  Thank you!

  mcbrighde

  Hello @mcbrighde,

  Welcome to the Forums of HP's Support. I understand you are trying to join the instant ink program, but need assistance in obtaining your printers code request. I would like to help.

  In order to get the printers claim code, you will need to have the printer on a wireless network. An ethernet or LAN connection will also work. This will give the internet access to the printer so that the ink levels can be monitored.

  You need not remove your USB connection for the printer on the wireless network.

  The following link will help put your Officejet Pro 8600 on the wireless network.

  HP OfficeJet printers - printer wireless (Windows) installation

  Once the printer on the network, tap the icon of ePrint/Web Services to enable Web Services and acquire the printers claim code. The icon you are looking for is in the lower left corner of the screen printers.

  

  You can also use the following link to view more detailed instructions.

  HP - service and using HP ePrint printers

  If you need further assistance or have any other questions please let me know.

  I'll be happy to help you.