Cisco ASA 5510 - Cisco Client can connect to the VPN but cannot Ping!

Similar Questions

• Can connect via the VPN, but cannot see the files

  I can connect via VPN to my company network, but the files do not arise under Vista. I have no problem to see them on my old Windows PC, so this is a specific problem of Vista. On my old system, just click on computer and it shows me my company on the network's records. No Vista - cannot find anywhere, even if I am connected via VPN. Where are they?

  Hello

  Since it is the network of the company, there is no way to know hwo security is configured, unless you are a computer scientist in society.

  Not "mess up" your computer, first talking to the person in charge of VPN connections.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I can connect to the WLan, but cannot access the internet on Tecra A8

  There is no problem when I use the LAN port.
  When I use the WiFi (wifi adapter Tecra A8), I can connect to the network, but the status is local, I can't access the internet.

  I've updated my access point with the latest firmware (D-link DWL-2000AP +).
  I do not get a new IP address.

  My OS is Vista.

  Hello

  You have set up the WLan router with the right data from your ISP (internet service provider)?

  Further, I would recommend to disable all security on the router option and try to access the internet.
  I mean, you must disable the encryption (WEP, WPA), Mac filtering address, etc.
  In addition, check if, in settings TCP/IP, the option as "obtain an IP address automatically' has been set.

  Have you tried the WiFi connection using the customer like Intel ProSet utility or Atheros configuration tool?
  These tools can be used instead of own WLan connection option of Windows.

  Reset you the WLan router? This!

  Pleas check al these proposals

• Help, please! Connected to the VPN, but cannot access internal servers.

  Hi friends,

  I'm a newbie on vpn stuff, I set up a base on a Cisco ASA 5505 vpn by using ASDM, and I was able to connect to it.  However, I can't ssh or RDP to one of the servers in the House after that I connected to the vpn.  Here is the configuration.  Help, please!

  ASA Version 8.2 (5)

  !

  hostname sc - asa

  domain abc.com

  enable the encrypted password xxxxxxxxx

  xxxxxxxxx encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  DNS server-group DefaultDNS

  domain OpenDNS.com

  sc-pool_splitTunnelAcl-list of allowed access standard 192.168.1.0 255.255.255.0

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.96 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  interface ID client DHCP-client to the outside

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd dns 208.67.222.222 208.67.220.220 interface inside

  rental contract interface 86400 dhcpd inside

  dhcpd abc.com domain inside interface

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL encryption rc4 - md5, rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1

  WebVPN

  abc group policy - sc internal

  attributes of the strategy of group abc - sc

  value of server DNS 208.67.222.222 192.168.1.3

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value abc-sc_splitTunnelAcl

  field default value abc.com

  a001 xxxxxxxxxxx encrypted password username

  a002 xxxxxxxxxxx encrypted password username

  username a003 encrypted password privilege 0 xxxxxxxxxxx

  a003 username attributes

  Strategy Group-VPN-abc-sc

  a004 xxxxxxxxxxx encrypted password privilege 0 username

  a004 username attributes

  Strategy Group-VPN-abc-sc

  a005 xxxxxxxxxxx encrypted password username

  a006 xxxxxxxxxxx encrypted password username

  username privilege 15 encrypted password xxxxxxxxxxx a007

  remote access to tunnel-group abc - sc type

  attributes global-tunnel-group-abc - sc

  address sc-pool pool

  Group Policy - by default-abc-sc

  tunnel-group abc - sc ipsec-attributes

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:e7df4fa4b60a252d806ca5222d48883b

  : end

  Hello

  I would suggest you start by changing the pool VPN to something else than the current LAN network and see if that helps

  These should be the configuration required to achieve this goal

  • First remove us pool setup VPN VPN
  • Then we delete the VPN Pool and create again with an another address space
  • When then attach this new Pool of VPN again to the VPN configuration
  • In the last step, we add a NAT0 / exempt for this new pool VPN NAT configuration and remove the old ACL line for the former group of VPN

  attributes global-tunnel-group-abc - sc

  no address-sc-swimming pool

  no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  IP local pool sc-192.168.100.100 - 192.168.100.110 mask 255.255.255.0

  attributes global-tunnel-group-abc - sc

  address sc-pool pool

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.100.0 255.255.255.0

  No inside_nat0_outbound access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.96 255.255.255.240

  -Jouni

• IPSec VPN: connected to the VPN but cannot access resources

  Hello

  I configured a VPN IPSec on two ISP with IP SLA configured, there is a redundancy on the VPN so that if address main is it connect to the VPN backup.

  QUESTIONS

  -Connect to the primary address and I can access resources

  -backup address to connect but can not access resources for example servers

  I want a way to connect to backup and access on my servers resources. Please help look in the config below

  configuration below:

  interface GigabitEthernet0/0

  LAN description

  nameif inside

  security-level 100

  IP 192.168.202.100 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description CONNECTION_TO_DOPC

  nameif outside

  security-level 0

  IP address 2.2.2.2 255.255.255.248

  !

  interface GigabitEthernet0/2

  Description CONNECTION_TO_COBRANET

  nameif backup

  security-level 0

  IP 3.3.3.3 255.255.255.240

  !

  !

  interface Management0/0

  Shutdown

  No nameif

  no level of security

  no ip address

  management only

  !

  boot system Disk0: / asa831 - k8.bin

  boot system Disk0: / asa707 - k8.bin

  passive FTP mode

  clock timezone WAT 1

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  Name-Server 4.2.2.2

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  network of object obj-200

  192.168.200.0 subnet 255.255.255.0

  Description LAN_200

  network of object obj-202

  192.168.202.0 subnet 255.255.255.0

  Description LAN_202

  network of the NETWORK_OBJ_192.168.30.0_25 object

  subnet 192.168.30.0 255.255.255.128

  network of the RDP_12 object

  Home 192.168.202.12

  Web server description

  service object RDP

  source eq 3389 destination eq 3389 tcp service

  network obj012 object

  Home 192.168.202.12

  the Backup-PAT object network

  192.168.202.0 subnet 255.255.255.0

  NETWORK LAN UBA description

  the DM_INLINE_NETWORK_1 object-group network

  object-network 192.168.200.0 255.255.255.0

  object-network 192.168.202.0 255.255.255.0

  the DM_INLINE_NETWORK_2 object-group network

  network-object object obj-200

  network-object object obj-202

  access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any

  access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any

  OUTSIDE_IN list extended access permit icmp any any idle state

  OUTSIDE_IN list extended access permit tcp any object obj012 eq inactive 3389

  gbnltunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

  standard access list gbnltunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0

  BACKUP_IN list extended access permit icmp any any idle state

  access extensive list ip 196.216.144.0 encrypt_acl allow 255.255.255.192 192.168.202.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  backup of MTU 1500

  Backup2 MTU 1500

  local pool GBNLVPNPOOL 192.168.30.0 - 192.168.30.100 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow any backup

  ASDM image disk0: / asdm-645 - 206.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25

  NAT (inside, outside) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.30.0_25 NETWORK_OBJ_192.168.30.0_25 non-proxy-arp-search of route static destination

  !

  network of object obj-200

  NAT dynamic interface (indoor, outdoor)

  network of object obj-202

  dynamic NAT (all, outside) interface

  network obj012 object

  NAT (inside, outside) interface static service tcp 3389 3389

  the Backup-PAT object network

  dynamic NAT interface (inside, backup)

  !

  NAT source auto after (indoor, outdoor) dynamic one interface

  Access-group interface inside INSIDE_OUT

  Access-group OUTSIDE_IN in interface outside

  Access-group BACKUP_IN in the backup of the interface

  Route outside 0.0.0.0 0.0.0.0 2.2.2.2 1 followed by 100

  Backup route 0.0.0.0 0.0.0.0 3.3.3.3 254

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  value of the URL-list GBNL-SERVERS

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  AAA authentication enable LOCAL console

  http server enable 441

  http 192.168.200.0 255.255.255.0 inside

  http 192.168.202.0 255.255.255.0 inside

  http 192.168.2.0 255.255.255.0 inside

  http 192.168.30.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  http 0.0.0.0 0.0.0.0 backup

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  ALS 10 monitor

  type echo protocol ipIcmpEcho 31.13.72.1 interface outside

  NUM-package of 5

  Timeout 3000

  frequency 5

  Annex monitor SLA 10 life never start-time now

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto IPSec_map 10 corresponds to the address encrypt_acl

  card crypto IPSec_map 10 set peer 196.216.144.1

  card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  inside crypto map inside_map interface

  ipsec_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  ipsec_map interface card crypto outside

  gbnltunnel card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  backup of crypto gbnltunnel interface card

  Crypto ca trustpoint ASDM_TrustPoint0

  Terminal registration

  name of the object CN = GBNLVPN.greatbrandsng.com, O = GBNL, C = ng

  Configure CRL

  Crypto ikev1 allow inside

  Crypto ikev1 allow outside

  Crypto ikev1 enable backup

  IKEv1 crypto policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  enable client-implementation to date

  !

  track 10 rtr 100 accessibility

  !

  Track 100 rtr 10 accessibility

  Telnet 192.168.200.0 255.255.255.0 inside

  Telnet 192.168.202.0 255.255.255.0 inside

  Telnet timeout 5

  SSH 192.168.202.0 255.255.255.0 inside

  SSH 192.168.200.0 255.255.255.0 inside

  SSH 0.0.0.0 0.0.0.0 inside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 0.0.0.0 0.0.0.0 backup

  SSH timeout 30

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  management-access inside

  a basic threat threat detection

  threat detection statistics

  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

  WebVPN

  allow outside

  enable backup

  activate backup2

  internal gbnltunnel group policy

  attributes of the strategy of group gbnltunnel

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  greatbrandsng.com value by default-field

  Group Policy 'Group 2' internal

  type of remote access service

  type tunnel-group gbnltunnel remote access

  tunnel-group gbnltunnel General-attributes

  address GBNLVPNPOOL pool

  Group Policy - by default-gbnltunnel

  gbnltunnel group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  type tunnel-group GBNLSSL remote access

  type tunnel-group GBNL_WEBVPN remote access

  attributes global-tunnel-group GBNL_WEBVPN

  Group Policy - by default-gbnltunnel

  tunnel-group 196.216.144.1 type ipsec-l2l

  IPSec-attributes tunnel-group 196.216.144.1

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  HPM topN enable

  Cryptochecksum:6004bf457c9c0bc1babbdbf1cd8aeba5

  : end

  When you say that "the external interface is downwards using failover techniques" you mean this failover occurred because the ASA is no longer able to reach the 31.13.72.1?  Not that the actual interface is broken?

  If this is the case, then the NATing is your problem.  Since you're using the same VPN pool for VPN connections the ASA cannot distinguish between the two streams of traffic if the external interface is still in place.  The SLA tracking only removes a route in the routing table, but does not affect what happens in the NAT process.

  try to change the NAT statement follows him and the test (don't forget to remove the other statements to exempt of NAT for this traffic during the test):

  NAT (inside,any) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25

  If this does not work, I would either turn off the external interface when a failover occurs, or create a second connection profile that contains a separate mass of IP for the VPN connection and ask users to connect using this profile when a failover takes place.  Don't forget to create Nat exempt instructions for this traffic also.

  --

  Please note all useful posts

• I can connect to the internet, but cannot stay connected to thn over 10 to 15 minutes.

  After I changed my MiFi for a Verizon 890 L 4 G LTE Verizon internet access I can access the internet for about 10 to 15 minutes. He stops abruptly, but when looking at the network and sharing Center to watch I am always connected. When I run the troubleshooting it says that there is no problem. When I look in the detail section of the troubleshooting it is said that there may be a problem, but there is no additional information available. The thing really strange is that my wife and I have exactly the same computers and the OS and his computer has no problem to stay connected. I found a update for my card driver and it made no difference. I am at a loss now other solutions. I also put the hotspot in WPS mode hoping it would reconfigure the communication between it and my laptop, it made no difference. Help please.

  Hi kodibear333.
   
  
  Thanks for posting your query in Microsoft Community.
   
  I understand from your description, that you have a problem with connecting to the Internet.
   
  Could you please answer the following questions so that I can help you better.
   
  
  1. don't you get an error message when you are disconnected from the internet?
  2 have you made changes on the computer before this problem?
   
  
  I want you to try the following methods to resolve the problem.
  Method 1: Network connectivity problems
  Check out the link and follow the steps in the link.
  http://support.Microsoft.com/kb/936211#appliesTo
   
  Method 2: Wi - Fi and network problems.
   
  See the link and the steps mentioned in the link.
  http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1.
  Get back to us and let me know the status of the question so that I can fix it as soon as possible.

• Access remote vpn connects to the 5505 but cannot ping servers

  I have a cisco 5505 and trying to set it up with 6.4 AMPS.

  My vpn client connects ok to the network but I'm unable to reach one of the servers.

  I'm sure it's a simple configuration issue, as I don't have much experience with Cisco Configuration.

  Any suggestions on where to find would be very appreciated.

  Thanks in advance

  Graham

  Hi Graham,

  Please, add the following command:

  Inside_nat0_outbound to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.100.0 255.255.255.0

  Thank you.

  Portu.

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• can connect to the network but not internet XP

  I use a computer on a local network xp, can connect to the network, ping the DNS server, gateway, etc.  However, I can't not conncet to internet.  When I ping a web address using the address of the site name or xxx.xxx.x.xx I have no success.  Tried to reset winsock, tcp/ip, without success.  Would appreciate any help.

  First course of action:

  1. turn off the PC.

  2. turn off the router.

  3. turn on the router.

  4. turn on the PC.

• Connects to the router, but cannot send or receive data

  I have a WRT54G.  I can find the network and connect to the router, but I can't send or receive data.  I tried to connect directly to the router and I still not able to send or receive data. Both computers on the router has the same problem.  I did a reset the router back to the settings by default and still no luck.  Any thoughts?  Thanks in advance for the help.

  The first thing you can try is when you the Modem and the router is connected to the other, disconnect the power from the router and Modem, wait 30 seconds and then plug in the power to the Modem and once all the lights are solid, then connect the power supply to the Linksys router, now check if you are able to go online. If still no then...

  Who is your ISP. So I think you need to re - configure all settings of your router again.

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• Y does it does anyone know how many client can connect at the same time on the Microsoft VPN server?

  Hello everyone

  Is there anyone know how many client can be connected same time on microsoft VPN Server?

  Thank you

  Original title: VPN Windows Server 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I can connect to the internet, but not to my home network

  I have a PC running Windows XP SP3, which is connected to a Linksys WRT300N router. I have access to the internet. I can not connect to my home network; don't know what happened. all (3) computers are set to the same workgroup name. I can't find anywhere in the network settings for WinXP that relates my network name. Help!

  Thanks for any help you can provide.

  John

  I guess that the other two computers are working properly and that it can network together and that the only problem is the XP machine.  I'm also assuming that this problem persists when the firewall was disabled (including hidden like the one in the Cisco VPN client).  I also assume you mean by "is no longer connect to my home network" that you can't see other computers in your network neighborhood. See if this article helps you:

  "You can't see the other computers in the workgroup on the network on a Windows XP computer"
    <>http://support.Microsoft.com/kb/903267 >

  If this does not help, try to walk your way through the following:
  "How to troubleshoot network domestic in Windows XP"
    <>http://support.Microsoft.com/kb/308007 >

  HTH,
  JW

• PC can connect to the printer, but Mac cannot even with updated drivers.

  We have an HP Photosmart Premium C309g, which is connected to a Cisco Linksys EA2700 wireless router. The printer connects easily to the PC with windows 7. However on macs with Lion, the printer will be displayed when you type the IP address in the browser. However when you try to load the printer it does not appear. If you use the IP address to load it does not connect to the printer. He used to work. The only changes are a new PC and a new wireless router. I tried to update the drivers and software on the Mac. It did not help. Still the same problem.

  Hello

  Unlike Windows, peripheral Apple uses Hello (which is based on the multicast) to connect with the HP device over the wireless network.

  As far as I'm aware routers Linksys not configured for multicast by its default value.

  Try the following and check to see if that can help you:

  1. Enter the router from your browser homepage.
  2. Enter in the Security tab,
  3. Check filter multicast.
  4. CLCK save changes.
  5. Reboot the router and check any change.

  Kind regards

  Shlomi

• Problem just started, unable to see area but can be seen on the other PC on the network - can connect to the area but no access to resources.

  Have client with the latest Lenovo laptop, running Windows 7 Pro, part of a Windows 2008 domain. User never had problems earlier but takes off mobile out of office last week that he had then only on vacation. The user has Verizon Wireless for Internet access so that resign. User returned, connected area through the configuration of a connection without error, but was unable to access resources in any domain. No applications have been installed on the laptop so that it is on vacation. In windows Explorer, the user can see as other NAS PC's, printers, other devices on the network and able to access the Internet, but the doman and the server are missing from the list. The connection of the user from another PC to check the profile is ok, the user was able to resources in the domain from another PC. Had a different network user trying to connect on the laptop and had the same problem so I am confident that the problem is with the laptop itself and not domain or server. Also tried to disable the firewall on the computer laptop but did not help, empty DNS and other entries in cache but nothing helped. There were a few normal .net updates on laptop while resign but that was about it. Laptop is running Microsoft's Security Essentials for virus protection.

  Any ideas on how to resolve the additional or possible causes?

  Hi Jack,

  
  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the Technet Forum.
  You can follow this link to ask your question:
  Forum TechNet Windows 7:
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• NB200 can connect to wireless networks, but cannot connect to the internet

  I could connect my Win XP netbook to my network wireless secured to the House, other networks and public networks such as the library and McDonald's. This week, I am away from home and discovered that while I can still connect to a number of different wireless networks, I can't connect to the internet with Internet Explorer.

  I had this problem once before and fixed by reinstalling Windows XP and all my other software. I have no idea why it happened again. I'm hoping for a less radical solution to the problem... ?

  Hello

  You can try to renew the IP address.
  Got to RUN and type CMD.
  This would start the console (DOS window)

  Here, you use the command: ipconfig / renew

  It s also advised to update the Wlan driver. I've noticed some problems with older drivers for Wlan
  Here you can get the most recent:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them