Access remote vpn connects to the 5505 but cannot ping servers

Similar Questions

• I can connect to the WLan, but cannot access the internet on Tecra A8

  There is no problem when I use the LAN port.
  When I use the WiFi (wifi adapter Tecra A8), I can connect to the network, but the status is local, I can't access the internet.

  I've updated my access point with the latest firmware (D-link DWL-2000AP +).
  I do not get a new IP address.

  My OS is Vista.

  Hello

  You have set up the WLan router with the right data from your ISP (internet service provider)?

  Further, I would recommend to disable all security on the router option and try to access the internet.
  I mean, you must disable the encryption (WEP, WPA), Mac filtering address, etc.
  In addition, check if, in settings TCP/IP, the option as "obtain an IP address automatically' has been set.

  Have you tried the WiFi connection using the customer like Intel ProSet utility or Atheros configuration tool?
  These tools can be used instead of own WLan connection option of Windows.

  Reset you the WLan router? This!

  Pleas check al these proposals

• Connects to the router, but cannot send or receive data

  I have a WRT54G.  I can find the network and connect to the router, but I can't send or receive data.  I tried to connect directly to the router and I still not able to send or receive data. Both computers on the router has the same problem.  I did a reset the router back to the settings by default and still no luck.  Any thoughts?  Thanks in advance for the help.

  The first thing you can try is when you the Modem and the router is connected to the other, disconnect the power from the router and Modem, wait 30 seconds and then plug in the power to the Modem and once all the lights are solid, then connect the power supply to the Linksys router, now check if you are able to go online. If still no then...

  Who is your ISP. So I think you need to re - configure all settings of your router again.

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• Computer seems to be connected to the internet but cannot access web pages

  It says its connected to the internet and it can download the automatic updates, but when I open internet explore or mozilla or browser accesses a web page.

  The problem does not change if it connected to a hard line or wireless.

  The computer is a Latitude D620 on windows xp, if that helps.

  What happens when you try?

  Have you tried resetting IE?  (Tools |) Internet Options | Advanced...)

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• AnyConnect VPN connects to the work but not the House

  Hello

  I tried searching for this problem, but I have not found something that I think applies to this situation.

  A University that I work uses a vpn ssl with Anyconnect and while in my office at another University, I can easily connect (even through a firewall). However, at home I can not connect.  If I connect to the webvpn then the connection hangs at the part where the installation program is to analyze the computer and nothing happens.  If I open the program Anyconnect sslvpn address in the login field and I get a time-out error.

  I tried to disable the windows firewall and my antivirus, but this is not enough, and not that he should, since both are active while at my desk. I also tried connecting via ethernet and wireless at home.

  OS: Windows 7 64-bit

  Thank you very much for your help!

  We started to see a similar problem a few weeks ago and concluded that when not at the office, users must uncheck the proxy configuration in Internet Explorer before AnyConnect works.  Once they VPN, they must of course activate the setting back on proxy.

  So far we can say, IE started to cache the proxy.pac and use it when the user is not connected to the corporate network.  We are still investigating but would be interested in hearing if this affects others now, and if this is a recent problem for them.

• I can connect to the internet, but cannot stay connected to thn over 10 to 15 minutes.

  After I changed my MiFi for a Verizon 890 L 4 G LTE Verizon internet access I can access the internet for about 10 to 15 minutes. He stops abruptly, but when looking at the network and sharing Center to watch I am always connected. When I run the troubleshooting it says that there is no problem. When I look in the detail section of the troubleshooting it is said that there may be a problem, but there is no additional information available. The thing really strange is that my wife and I have exactly the same computers and the OS and his computer has no problem to stay connected. I found a update for my card driver and it made no difference. I am at a loss now other solutions. I also put the hotspot in WPS mode hoping it would reconfigure the communication between it and my laptop, it made no difference. Help please.

  Hi kodibear333.
   
  
  Thanks for posting your query in Microsoft Community.
   
  I understand from your description, that you have a problem with connecting to the Internet.
   
  Could you please answer the following questions so that I can help you better.
   
  
  1. don't you get an error message when you are disconnected from the internet?
  2 have you made changes on the computer before this problem?
   
  
  I want you to try the following methods to resolve the problem.
  Method 1: Network connectivity problems
  Check out the link and follow the steps in the link.
  http://support.Microsoft.com/kb/936211#appliesTo
   
  Method 2: Wi - Fi and network problems.
   
  See the link and the steps mentioned in the link.
  http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1.
  Get back to us and let me know the status of the question so that I can fix it as soon as possible.

• BlackBerry Smartphones connected to the Internet, but cannot open the web browser, facebook...

  My Blackberry Bold 9900 connects to internet with wi - fi and 3 G/edge connection (w / caps) and receive emails, but cannot open the web browser, facebook, twitter, bbm, app world... for the last two days (I think that I have improved some applications). Everyone knows the same?
  Can someone help me pls? Thank you!!

  OK, at least you get the signal necessary for many applications work.

  Please remove your battery while your phone is on, and then replace it.

  Let us know if that helps you.

• Windows Vista computer connects to the internet, but not ping to auto DHCP name

  Trying to get my Vista machine to have the file and printer sharing, I can see attached machines, and they can see the Vista machine, but does not connect to the computer.  The Vista machine will not see public folders with error code: 0 x 80070035 the network path was not found.

  Ping the DHCP name provides:

  Main2 ping [fe80::12:f74:b94e:94fb 8%] of 8% with 32 fe80::12:f74:b94e:94fb
  YTES of data:
  General failure.
  General failure.
  General failure.
  General failure.

  Ping statistics for fe80::12:f74:b94e:94fb 8%:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss),

  Ipconfig/all

  Windows IP configuration

  Name of the host...: Main2
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Belkin Wireless G Desktop Card
  Physical address.... : 00-11-50-D6-32-97
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e497:9802:e6a6:40ce % 10 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Tuesday, October 21, 2008 23:06:50
  End of the lease...: Thursday, October 23, 2008 11:06:50
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e50:12:f74:b94e:94fb (area
  ED)
  Address IPv6 local link...: fe80::12:f74:b94e:94fb %8 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {E71A931D-A587-49DD-BF49-209236344
  523}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help?

  
  

• Is connected to the Internet, but cannot use the Compaq Presario SR5123WM desktop PC

  Product name & #: Compaq Presario SR5123WM desktop PC (GC660AA-ABA)
  Operating system: Windows Vista Home Premium 32
  No only error message when Internet Explorer does not display the page or iTunes can't find any connection network (any application that requires an Internet connection).

  No changes were made to the system.

  I have the dial-up connection. The Bureau uses the Modem - PCI Soft Data Fax Modem with SmartCP (COM3).

  Once I start the computer, log in to my user and connect to the Internet, I click on Internet Explorer and type in Google to see if it would work. It is said that "Internet Explorer cannot display the webpage". For iTunes, he would say "iTunes has not to connect to the iTunes Store." Make sure your network connection is active and try again. »

  I tried all solutions online and by phone. I reset netsh int ip / winsock. I reset Internet Explorer options. Nothing works.

  What is strange, is that the Internet connection works well on my laptop (using Conexant D110 MDC V.92 Modem (COM3)).

  It would be GREAT if you could help me find a solution to this problem, because this has happened for months, and I'm tired of waiting. I put all my hopes on you.

  You may be able to do a system restore if the original HP partition is always on the computer.

  Here is a document detailing the steps:

  Perform a recovery of the system (Windows Vista) HP

• When it is connected to the LAN, FF cannot find servers; no problem with the wi - fi

  26.0 Firefox running on a Windows 8.1 System. The thing I meet is this: I have no problem loading of pages and surfing when I am connected to my wi - fi network (I have a double function modem that wireless and LAN at the same time). However, whenever I plug the LAN cable, I get the error message that Firefox can't find the server. In this case if I disconnect the wireless at the same time. BUT, if I continually press the button [start] or simply tap the icon reload the page in the address bar, will eventually load, usually after a few failed attempts. However, the page loads usually only partially in a first time, apparently without advanced HTML formatting. But, after clicking on reload again one or two times, the page loads normally. Unknown, is that the behavior is not consistent - some pages of charge very well. But I can't for the life of understand me a boss.

  I've tried troubleshooting by disabling NoScript, but it doesn't seem to make a difference.  It's almost as if the wait time for a response from the server is so minimal when connected to LAN that the server has no chance of loading the first time.  Does that make any sense?  If so, how can I go about fixing the issue?
  

  Thanks for any help you can offer on this (for me, anyway) head-scratcher.

  Maybe another DNS server is used or there is still cached data.

  Have you tried a hard facing to bypass the cache to refresh all files?

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  You can also try to switch to work offline/off voltage after changing the network connection.

  If is also possible that your firewall treats the Wi - fi connection other than the connection to the local network.

• a public access remote vpn from an inside interface asa 5505

  I'm trying to see if it is possible to accomplish what I am trying. I have an ASA 5505 with the following configuration.

  1. There is an external connection, connected to the ISP. Let's say that it is 10.1.1.1/24 for ease. There is a remote VPN configuration as the access of people through this interface.

  2. There's the inside network, which is the normal LAN. It's cable system in the office. to say that it is 172.20.0.1/24.

  3. There is a wireless network on a VLAN separate called WLAN. It has an IP of 192.168.1.1/24. There is an ACL allowing traffic to that VLAN to the public internet.

  Essentially, I would like users to be able to use the same VPN settings they use when connecting from outside of the Office when you are connected to WIFI.

  Also, I would like that they can access public IP addresses that I have NAT would be to internal servers. In this way, they can use IP addresses when they use on the public internet.

  Is this possible?

  Hello

  Well that's not going to be possible, the only thing you can really do is to activate the crypto map on the WLAN facing interface, by design, you cannot not access VPN, ping or manage the device on an interface which is not directly connected to you.

  I hope this helps.

  Mike

• I have a laptop with Windows XP that show an icon connected to the internet, but I can't access the internet.

  Hello

  I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.
  Thank you
  original title: wireless internet

  Do you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• Win7 64 bit, connects to the router, but no error internet access-"page not found".

  Original title: Win7 64 bit, connects to the router but no internet access.

  Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.

  Hello

  1. Have you made changes on the computer before this problem?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  I would suggest trying the following steps and check the status of the question.

  a. open Internet explorer.

  b. click on tools, then on Internet options.

  c. click on the Connections tab.

  d. click on LAN settings.

  e. uncheck the option use a proxy server for your LAN .

  f. save the changes by clicking on apply and ok.

  Method 3:

  Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.

  a. on the Tools menu, click Internet Options.
   
  b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.

  c. close Internet Explorer.

  d. restart Internet explorer and check the status of the issue.

• Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Disable the firewall and check the connectivity in media center.