Why replace MSE 8510 MCU 4.4 with Telepresence Server (3.1)

Similar Questions

• MSE 8510 MCU Chair vs participants comments

  What is the difference between a Chair and feedback from participants, and which is considered to be someone to be a president and another guest?

  I have the following options set on our MCU and no matter how I compose in, even a non registered endpoint that is not on our VCS, I always give me the level of control for users of Chair set.

  MCU type: MSE 8510 v4.3

  In the menu call for Chair: 3 - advanced level

  In the menu request for comments: level 1 - Local

  Thanks, Patrick

  > What is the difference between a Chair and feedback from participants, and which is considered to be someone to be a president and another guest?

  A conference will not begin before the first President of the joints.

  Endpoint to participate as guests (participate in the Conference with guest ID) will see a silent screen black/along with the text of the display "waiting for the Chair of the Conference" and an audio prompt after five seconds, then every minute thereafter.

  Addition to above, you can control the behavior when the last president left the Conference (it's the only when invited remain setting).

  The two options are:

  -All participants are disconnected (default)

  -All participants can continue the Conference until the last of them disconnects (non-action)

• cluster with telepresence Server 8710

  Hello

  Currently, I want to deploy the client conference and here is the list that I bought for my client:

  -telepresence Server 8710 with 24 licenses x 2

  -MSE 8000

  -License CUCM

  -VCS license

  My questions are:

  1. from the Cisco documentation, I know that 2 of my server of telepresence could be clustered. 1 my server Teleprsence will be the master blade and the other will be the blade of the slave. By doing this, my server of telepresence is already grouped?

  2. I don't have a driver's license, but I know that this driver could manage 1 telepresence Server wethere that she is not allowed. I tried to manage my my server in cluster of telepresence, but he said that driver had 2 telepresence managed server. I thought that my number of clustered server of telepresence in 1 for conductor. Can someone explain this?

  3. what happened to the deployment guide if I want to use all my 24 licenses? From my understanding, 1 Telepresence Server Blade can only manage 12 licensing screen and cascade could not been since I couldn't do it as remotely managed. Help, please.

  Thank you.

  Telepresence Server MSE 8710 installing blades are autonomous, it is not until you configure using the blade of supervisor MSE 8050 they will become a cluster.  See clustering on pg 90 of the Supervisor MSE 8050 Help Guide.  I don't know how a cluster server Telepresence would manage a conference which exceeded a unique ability of blades that was within the cluster, but according to the help guide of supervisor, it is said that the master blade could allocate licenses video port to the participants in the Conference that could be a big conference or several small conferences.  I would say, just create a conference and start adding in the participants and see what happens.

  Looking at the conductor data sheet it is said that the Essentials (or the free version) can support '1' (independent), since a cluster behaves as a single server, but in reality it is more than 1 server it probably not supported.  The conductor Admin Guide on pg 17, it is confirmed that the free version of conductor does not support cluster conference bridges.  It seems that if you want to use with driver cluster conference bridges, you must at least move to select conductor (middle version), because the free version does not support.

  If you use driver for some reason, you should be able to configure the 8710 blades runs remotely managed mode, I have several configured this way, but they are all autonomous blades, none is in a cluster.  Help server TelePresence MSE 8710 Mode guide managed remotely on the basis

  Is there a particular reason that you must use a driver, why not use the blades of telepresence Server 8710 MSE mode managed locally in a cluster?  Help server TelePresence MSE 8710 Mode guide managed locally based

• Cisco MSE 8510 MCU - comments PIN does not work

  Hello

  We have a few conferences on 8510 blade. Each conference is the main AXIS and the comments set up PIN. When I dial in the Conference, main SPINDLE works fine but the PIN prompt does not work.

  I tried to deal with the PIN of an endpoint, then the guest PIN from the other end, but the Conference does not accept the feedback PIN. I can use the good main SPINDLE on the two end points.

  Anyone know what may be the issue?

  I just tested this without 8510, no problem at all.

  Can you give us a screenshot of the configuration of your conference?

  I had used the same digital ID for Chair and comments, with a different PIN for each.  When I connected as Chairman, I went straight in.  When I connected as a guest, I went straight in, but I got a quick saying saying President to arrive or to connect.

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Image of MSE 8510/8710 blades and custom

  Hello

  We have a customer requirement to download the image to measure for the MSE 8510/8710 balde. Essentially when they call the standard AUTOMATIC or TMR, they won't see the Codian image (built in) and they need to see their own custom image with the custome made audio.

  I know that we can load the audio files on command. can we upload the image static (such as a company logo) as a bunch of customization?

  Note: The TANDBERG (MCU, ISDN GW) products had this option to download the custom image made.

  Thank you.

  Chris

  Hi Chris,

  We can only toggle the lobby screen. From now there is no provision to load a custom image.

  To turn on global basis

  1. go in configuration > system settings

  ' 2. check or uncheck the box ' display entry screen "checkbox

  To do this on a per Conference basis

  1. go to configuration of particluar conference

  2. Select the appropriate option in "View the lobby screen" menu drop-down.

  In addition, you can apply feature through the appropriate channels.

  Please have this question answers and write it down. If have more queries do not hesitate to ask.

  -Sagar

• Difficulties of transmission C40 to MSE 8510 via H323

  Nice day

  I currently have intermittent problems between a codec C40 and my MCU. When the device is composed in the bridge it does not have audio or video, it passes however.

  There is no shortage of receive audio or video when composed through SIP (MCU) or dial directly from another endpoint via H323.

  The unit was stable until I upgraded to TC6.2.0. I upgraded C40s all across the country and no other issues brought to the point. The problem persisted after that I get the system back to 6.1.2.

  After the failure of the downgrade I upgraded to 6.2.0 and resetting the device. Once reset, I did a restore of the TMS system.

  The unit is problematic since the installation. I have known problems that the unit could not pick up thermometers grounded which caused the device past security mode and increase the speed of the fans. In order to solve the problem, I upgraded the software twice. Currently, the unit may not in standby mode.  I also found the camera freezes and needs a reboot to restore functionality.

  System details:

  C40: TC6.2.0.20b1616

  MSE 8510: 4.4 (3.42)

  VCS C/E: X7.2.2

  Just a few comments on that for those who are interested.

  This is a bug in x 6.2 and 6.1.1

  https://Tools.Cisco.com/bugsearch/bug/CSCui47228

  TC6.2 fail to send ack of the OLC to MCU intermittently

  CSCui47228

  Description

  Symptom:
  TC6.2 not send OLC ack to MCU intermittently.
  Conditions:
  call with the MCU, intermittently receive no video and audio of MCU
  Workaround solution:
  try to reconnect to the call once again

  Last modification:

  Ms 9,2013

  Status:

  Fixed

  Severity:

  Serious 2

  Product:

  Cisco Telepresence System Integrator C series

  Support requests:

  0

  Known affected releases:

  6.2.x

  6.1.1

  Known fixed releases:

  6.3

  6.2.1

• 8710 GST MSE and MSE 8510 blade clustering

  These can simple questions, but I can't seem to find clear answers to these questions. You can cluster telepresence MCU MSE 8510 blade with GST MSE 8710 blades? And if yes, what version of the software do I need to have each blade running? I'm looking to upgrade our MCU at GST and I want to just make sure I have all the info I need. Thank you.

  Hello Eddie,

  You can only cluster the same blades.  Example, MCU with other 8510 8510 s up to 3 blades and GST 8710 with other 8710 s up to 4 blades.  The exception to this rule is if you are migrating your MCU 8510 to GST blades by installing the MCU to the GST software on the 8510, see Running_TS_Software_on_MCU_MSE8510 on how to do this, so these blades MCU 8510 now becomes and should then be treated as GST 8710 blades.

  All blades that should be included in a cluster must be running the same version of the software.

• CHKDSK replaced the security id not valid with default security id & showed a black screen with the mouse cursor

  Hi you

  After running CHKDSK, it said replacement of the security id invalid with the default security id in windows 7 64 bit

  After that it's over, he just showed a black screen with the mobile mouse cursor!

  I searched but did not find the answers on Microsoft

  Please help me

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  Check the drive run at Windows startup?

  Thank you for details on the issue.

  This message is displayed because the specified file has an invalid security ID. Each file on a NTFS or FAT volume has security what ID assigned. The ID assigned to the data file does not match the ID assigned to the security data stream file ($SDS). There is a mismatch of Ids. CHKDSK replaced the invalid security ID.

  Black screen with cursor may appear due to corrupted display driver.

  I suggest you try using the steps described in this article and check.
  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Media Port Mode on a MSE 8510

  Hello

  I would like a confirmation, currently we have a blade in our MSE 8510 and the Media Port is set to HD.

  • This means that we have 20 HD video Ports available (up to 20 endpoints will be able to connect)
  • We have also 20 dedicated ports for streaming.
  • Finally, we have 20 additional voice Ports.

  The problem is that we have a meeting that it will take 26 video Ports, if I put it in the SD, we have about 40 SD video Ports. But no content or audio ports.

  Will be what this means if 26 end points to connect I have 14 left ports and ports audio and content will begin to use my video ports?

  I'd connect 26 people on my MSE 8510, with about 10 people connecting via audio and all end points will receive the content.

  Please see attached picture.

  Yes, if you share your content, will consume you a port video, same thing for one participant audio that connects to the Conference.

• Custom privileges for the user, MSE 8510 blade

  Hello!

  Does anyone know if it is possible to create a user account on the MSE 8510 blade with 'custom' privileges more than the preconfigured settings?

  Example: You can create a user who can display one or more conferences (and only) and "limited control" for those conferences WITHOUT giving the user the ability to view/edit other conferences?

  Kind regards

  OLA

  HI, Ola,

  I'm afraid that this is not possible at the moment, and my suggestion here is to wear a request functionality, through the Key Account Manager - based on the effect of nbusiness this feature has on your business, we can consider this to be implemented.

  Currently there are 7 different level privileges, but none of the people not can be customized, as requested.

  The levels of prvivilegel are:

  1 Administrator

  2. conference creation and control

  3. creation and restricted control conference

  4. creation of the Conference

  5. details of conference

  6 conference list more streaming

  7 list Conference only

  Please let me know if you need more details about each individual privilege.

  Concerning

  Cristian

• Replace the charger in the project with sequence Panel

  Hello! I would like to ask a question on the simplification of workflow that is walk around in my mind for years:

  Is it possible to replace an element in the project with a sequence Panel?

  The reason why: I have a music-video with LOTS of cuts between relatively little overall clips. For the adjustment of the colors in the first (or otherwise), I like to keep as much space for easy modifications as possible until rendering and so create a sequence for each clip where I apply these effects at once. In this way, I don't have to go through each occurrence of the sequence in my calendar to change the rating. While this works well if you have done the part of each movie clip before the cut, I have no idea how to achieve this easily once you already have your project cut with clips instead of clip-sequences.

  Is there another way for the effects "on the scale of the clip" that I'm missing? Thanks in advance for the advice and help.
  Best regards!

  If I understand your workflow?

  Can have a look at the ranking of the main element.

  Apply effects Master Clip in Premiere Pro

  For it is possible to replace an element in the project with a sequence Panel? NO.

• Why IE7 becomes errors HTTP 400 XP with a good connection?

  What follows is an adaptation of article How-To-ask questions on your main page of the forum, which is so convenient I save it as a model of :

  • Build number of VMware Fusion: 2.0.1 (128865)

  • Mac:  Mac Pro w /.

  • What is the problematic behavior and what makes: most of my IE bookmark current HTTP 400 errors of links here, even the searches using the Google toolbar report 400 Bad Request.   Examples: http://www.google.com/webhp?sourceid=navclient & ie = UTF-8 or http://www.netflix.com/MemberHome IE diagnose connection problems indicates that the connection is good.  The same addresses open using Firefox (copy/paste).  All the tested links worked fine a few days ago and I have not changed the system or the software in XP Pro.  Bit Defender Internet Security software reports no problem and none of the links are listed as delimited (also not limited in IE options).

  • Have you tried looking for the Forums of Discussion for an answer?  Yes, I found some similar problems, but not the same.

  • What you have already tried:  As suggested in a forum post, I checked the connection parameters (they are all set to detect automatically).  Also, I downloaded IE 7 on the MS site and reinstalled.  No joy.  I checked the Internet Options (although I have not changed anything) and set the security in the middle (it was set to high heat).  Has nothing so I put back it.

  • The conditions where he works: addresses, and links on these pages also work.  Example: http://gis.esri.com/partners/hw_promo/hw_promo.cfm

  • How many times you see the problem:  Never had this problem before.  It started a few days ago, and happens whenever I tried wrong addresses (except for Netflix, which loaded once after having failed several times and has not loaded since).

  • He has already worked in the same configuration (same VM, same computer), and if so, what has changed since then:  Yes, it worked a few days previously, same machine, same VM, even XP, same everything I can think of.  The only change I know is daily updates to the data Bit Defender virus.

  • How experienced with OS X, you are, and you are comfortable with the
    command line: system administrator intermediate for Mac OS X and Windows XP Pro, except that I am a permanent newbie with virtualization and nothing networky.  I can do the command line as I tells me exactly what to enter, and why.

  If you experience problems with a guest, include:

  • Guest operating system:  Windows XP Pro 2002 SP3 with 3 GB of RAM, automatic updates is on.

  • VMware Tools:  Installed, but unknown version (how do you like that?)

  • Not a Boot Camp virtual machine

  • Virtual Machine created in Fusion

  If you experience problems with an application to a guest, include:

  • The application name and version:  Internet Explorer 7.0.5730.13

  Mac:

  • Dual-Core Intel Xeon 2.66 GHz (2 CPUs, 4 cores)

  • RAM: 11 GB

  • Graphics card: NVIDIA GeForce 8800 GT

  • What version of the OS version: 10.5.6

  If you are an error, including:

  • Where the error message (for example, an application in the host, the guest himself, OS X, etc.): errors HTTP 400 using only the IE browser

  • The exact text of the error message: "Web page is not found" or "bad request".

  If you experience network problems, including:

  • Network type (e.g. NAT, bridged or host-only): NAT

  • Guest network information (Windows: ipconfig/all at a command prompt): is there a risk of flight security or identity if I provide this information?

  • Host information network (run ifconfig-a in a Terminal window): is there a risk of flight security or identity if I provide this information?

  Other Notes (not things that might be related but probably is):  I had intermittent problems with my wireless modem; it loses its connection and resets all configuration.  The incoming connection has been tested and is fine all the way to the modem.  Wired connections are not lost; Wi - Fi access only.  I need to reconfigure the wireless settings to restore the service.  The modem is replaced.  Also, my wife is having a very similar problem on his iMac (no virtualization) where Firefox reports some pages Web cannot be found, but Safari loads using the same exact address; and his computer accesses Internet wireless via my modem.

  So the Question is:  I need to use Internet Explorer through Windows for some sites, regardless of whether a different browser can load pages, because some websites work just using IE.  How can I get IE to work again?

  I don't think that you need to test with a clean build roll back to IE6 running.  This means, basically, that the question is problem IE7 and OS or Windows and not a problem of Fusion.  When you have time, I would like to reinstall IE7 from the standalone downloadable update and disconnect from the network, so it can not retrieve updates while it is installing and before making updates after that Windows can check see if IE7 works and do Windows updates and check again.

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• a replacement lcd will set a screen with a gray screen or a screen that has lines

  a replacement lcd will set a screen with a gray screen or a screen that has lines

  To make sure that it is not software related, set it back to factory settings using iTunes on your computer.

  If the screen still has problems after that, have it repaired by Apple or an Apple authorized service provider.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Apple iPhone - contact Support - support