Cisco CUIC stand-alone NFR of installation

Similar Questions

• You need to remove stand-alone CS6 before installation CC single Ap your Illustrator?

  I have a stand-alone copy of CS6 on my computer, but think a Cloud creative unique Ap Illustrator subscription. I have not previously participated to subscriptions, so am new to all aspects of it. There will be conflict in download, installation and future functioning if the autonomous CS6 and the subscription of the CC of the Illustrator are on the same computer (Win 8.1, 64-bit)?  Should I remove the stand-alone CS6 to avoid problems?

  Thank you very much for your help!

  Krista,

  You can continue your CS6 either, no interference.

• Connect a mounting rack system UCS stand-alone server

  Hello

  I read somewhere on the dcoumentation this server from Cisco to stand alone as c210, c250 can be attached to the UCS Interconnect fabric. Can some expert cisco shed some light in there?

  I think I know,

  I'll have to plug the UCS FI External rack mount FEX and Cisco servers connecting to the FEX. Can someone clarify?

  What are the system requirements for the configuration above to UCS?

  I configured ports UCS FI as server ports and connect them to an external FEX with Twinaxial cable. But the ports are the link down. Cable Twinaxial is supported? I have to do additional configuration that we do when you plug a Nexus 5000 on a FEX?

  Any help would be apprciated.

  Thank you.

  The connection to a server in a stand-alone rack details are covered in this doc

  https://supportforums.Cisco.com/docs/doc-15034

  Dave

• How do you run a stand-alone program after its installation on the CD - RW disc

  How do you run a stand-alone program after its installation on the CD - RW disc

  How do you run a stand-alone program after its installation on the CD - RW disc

  Programs are not * install * to a CDRW at least that the CDRW is seen as a disc using the writing software to package such as DirectCD (Roxio) or OnCD (Nero). A disk used with writing software by packages cannot be used on any PC.

  Files are copied to a CD - RW for storage and retrieval. If the program installs, it install in general in C:\Program Files or similar and often drop files into \Windows and other places, too.

  -steve

• Where can I download the stand-alone installer for .NET Framework 1.0 to 4.0 for Windows XP SP3 x 86

  I would like to download full standalone installer for Windows XP and Vista x 86 for Net Framework 1 to 4. If anyone can provide the links for XP and Vista x 86 it would be appreciated.

  Hi Victor Moreau.

  Thanks for posting in the Microsoft Community.

  I understand that you want to download the stand-alone installer for .NET Framework 1.0 to 4.0 for Windows XP SP3 x 86.

  I suggest you download links to install older versions of .NET:http://www.microsoft.com/net/download

• I run the stand-alone windows installer to thr and displays the error code 0 x 80240009

  When I ran the windows update stand-alone installation, it updated kb947821 hotfix, but after he would not install updates

  0 x 80240009

  WU_E_OPERATIONINPROGRESS

  Another operation in conflict was underway. Some operations such as the installation cannot be performed twice at the same time.

  Restart and try again.

• Stand-alone installation of Windows 7 problem

  I have just installed Windows 7 Home Premium 64 - Bit and then installed an upgrade to Windows 7 Ultimate on a new desktop computer.

  All up and running.

  When I download and try to install Service Pack 1 - KB947821-v34 - x 64, I encounter this error

  Windows Update Standalone install.

  "Setup has detected the error: 0xc8000222.

  I also have the same error message when I try to install XP Mode.

  WindowsXPMode-en-us (1) installs OK (installed first)

  Windows6. 1 - KB958559 - x 64-RefreshPkg (Virtual PC) - error: 0xc8000222

  I also downloaded the Microsoft troubleshoot and get this message

  "A problem is preventing the troubleshooting tool to start.

  Any help appreciated

  John

  Hi John,.

  To resolve your concern about stand-alone installation of Windows 7, please follow the steps here.

  An update on the result.

  Kind regards.

• Win 7, stand-alone windows installer does not install the msu downloaded on my HD files.

  I have several MSU files that I downloaded on my computer.

  I click on them and the stand-alone windows installer goes into "searching for updates on this computer".

  2 hours later, still nothing.

  I know that people have problems with the update of win 7... Nothing works.

  So far is just sitting there looking for updates... He ran all night... Nothing... always to research.

  I can not find where Microsoft puts the installed update files... If the software distribution folder, which wiped out during one of my attempts to resolve this problem.

  windows update told me today there were new updates available, and then sit there for 6 hours trying to get them with no result...

  So if I can't even manually install MSU file, what can I do? Try to install the kb3102810 fix

  You can use internet explore and access the catalog M$ and bring the two,.

  That is to say a right click and run as administrator

  

  Then go to the catalog and the top search right for each update and allows them to basket

  http://catalog.update.Microsoft.com/v7/site/install.aspx

• Management Center of firepower of Cisco on the stand-alone server

  You can install a management center of firepower of Cisco on a stand-alone server and not a virtual machine?  Here is a guide for the virtual machine:

  http://www.Cisco.com/c/en/us/TD/docs/security/firepower/60/Quick_Start/m...

  but I couldn't find one for a stand-alone server. Or what I can use this procedure for a stand-alone server.

  Looks like the only option of will not not with a virtual machine is to get the device itself.

  Thank you

  To install on a server bare metal, you could first put ESXi (free version) on it and then run FMC as the virtual machine only on that. I've had clients do this and it works fine.

• Mode conversion controller in stand-alone mode in cisco 1702

  I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.

  Run this command to convert:

  # swarm - Standalone mode
  # reload

  I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...

  Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  Here are the files I'm looking for?

  Help, please.

  This original link can cause a headache for an Aruba AP which is different.

  Try this method:

  https://ripplesinharmony.WordPress.com/2013/01/28/downgrading-a-Cisco-lightweight-AP-to-autonomous-mode/

  The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).

  This second link is light which means the controller-based and you don't want that for this scenario.

  See you soon,.

  Ric

• Can possible save of Cisco DCNM on NFS and FTP on the stand-alone dcnm Server

  Can anyone suggest me that how I can back up the database DCNM 7.2 for a stand-alone server on NFS /FTP?

  What is the procedure to perform the backup on server NFS /FTP?

  Is any dependency to take backup on remote servers from stand-alone server DCNM (not HA)?

  Hello

  VIEW includes a database backup utility in the $INSTALLDIR/dcm/directory/bin/view.  There are 2 versions of the script, one for Oracle and one for postgres databases, and they both can be run from the server command line.  These scripts will create a dump (.dmp) database file which you can ftp offshore to another server to files, if you wish.

  For reference, here is the documentation on backups of db VIEW:

  http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/SW/7_2_x/Fundam...

  Thank you

  Eric

• How to move a stand-alone series C of Cisco UCS managed service profile without losing any data?

  Hello

  We currently have a stand-alone series cisco C with 2012 Windows Server installed on the local disks.  We need to go this Cisco UCS server managed with a service profile, but can not lose existing data and the method of operating system boot.

  Does anyone know how to do this?

  Thank you

  Hi Adrien,.

  To be able to accomplish this together the local drive to 'any Configuration' policy this way UCSM won't overwrite the current raid on the server configuration.

  See the link below

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config...

  Let me know if that helps

• Conversion of Cisco Aironet 1130AG light in stand-alone mode

  Hello

  I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.

  Yes, is there a procedure to convert to "AIR-AP1131AG?

  Thank you.

  Hello Michael,

  Yes, please follow this procedure for TFTP Re-imaging

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option. 

  2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.

  3) Rename the image into c1130-k9w7-tar.default

  4) Give your computer Ethernet an address in the range 10.0.0.2 till

  10.0.0.30

  5) Run the tftp server on your computer.

      - Make sure that the directory of your tftp server is the desktop.

      - Specify the AP address on the tftp server if needed.

  6) Connect the AP to the computer with Ethernet cable.

  7) Remove the power from the AP.

  8) Press and hold Mode button on the AP, and insert the power jacket in the AP.

  9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.

  10) Wait until the image installed and all led lights return to green 

  doesn't make sure that no firewall or antivrus is running on your computer.

  I hope this helps.

  Kind regards

  Talal

  =============

  Please note the answers that will help you

• Configuration of the Cisco etherchannel stack: flag stuck in stand alone

  I'm putting in place an etherchannel for my stack of Cisco (switch Catalyst 3750 G x 2), with a port on each switch the etherchannel. The example of battery cross http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00806cb982.shtml using as a guide, I created my channel. However when I discovered "show etherchannel summary 6 ' it says that both my ports are stand-alone, when I want them to be in port channel grouped in. Thank you in advance for your help, I added all the information I could think.

  Here is how I created the etherchannel

  sailing-sw-1 #conf t

  sailing-sw-1 (config) #interface gigabiteethernet 0/1/10

  active in sail-sw-1(config-if) mode #channel-group 6

  sailing-sw-1(config-if) #switchport trunk encapsulation dot1q

  sailing-sw-1(config-if) #switchport mode trunk

  sailing-sw-1(config-if) #exit

  sailing-sw-1 (config) #interface gigabiteethernet 0/1/10

  active in sail-sw-1(config-if) mode #channel-group 6

  sailing-sw-1(config-if) #switchport trunk encapsulation dot1q

  sailing-sw-1(config-if) #switchport mode trunk

  sailing-sw-1(config-if) #exit

  sailing-sw-1 (config) #exit

  The running-config

  sailing-sw-1 #show running-config

  Building configuration...

  Current configuration: 5390 bytes

  !

  version 12.2

  no service button

  horodateurs service debug uptime

  Log service timestamps uptime

  no password encryption service

  !

  sailing-sw-1 hostname

  !

  boot-start-marker

  boot-end-marker

  !

  Select the 5 secret...

  !

  !

  !

  high-level description of the cisco-global macro

  No aaa new-model

  1 supply ws-c3750g-24ts switch

  2 available ws-c3750g-24ts switch

  mtu 1500 routing system

  Uni-directional aggressive

  !

  !

  !

  MLS qos map cos-dscp 0 8 16 24 32 46 46 56

  !

  Crypto pki trustpoint TP-self-signed-538118016

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 538118016

  revocation checking no

  rsakeypair TP-self-signed-538118016

  !

  !

  TP-self-signed-538118016 crypto pki certificate chain

  certificate self-signed 01

  30...

  AF

  quit smoking

  !

  !

  !

  errdisable recovery cause link-flap

  60 errdisable recovery interval

  port-channel - the balance of the load src-dst-mac

  !

  spanning tree mode rapid pvst

  spanning tree default loopguard

  No spanning tree optimize transmission of bpdus

  spanning tree extend id-system

  !

  internal allocation policy of VLAN ascendant

  !

  !

  !

  Interface Port-channel6

  !

  GigabitEthernet1/0/1 interface

  No auto mdix

  !

  interface GigabitEthernet1/0/2

  No auto mdix

  !

  interface GigabitEthernet1/0/3

  No auto mdix

  !

  interface GigabitEthernet1/0/4

  No auto mdix

  !

  interface GigabitEthernet1/0/5

  No auto mdix

  !

  interface GigabitEthernet1/0/6

  !

  interface GigabitEthernet1/0/7

  No auto mdix

  !

  interface GigabitEthernet1/0/8

  No auto mdix

  !

  interface GigabitEthernet1/0/9

  No auto mdix

  !

  interface GigabitEthernet1/0/10

  switchport trunk encapsulation dot1q

  switchport mode trunk

  No auto mdix

  active in mode channel-group 6

  !

  interface GigabitEthernet1/0/11

  No auto mdix

  !

  interface GigabitEthernet1/0/12

  No auto mdix

  !

  interface GigabitEthernet1/0/13

  No auto mdix

  !

  interface GigabitEthernet1/0/14

  No auto mdix

  !

  interface GigabitEthernet1/0/15

  No auto mdix

  !

  interface GigabitEthernet1/0/16

  No auto mdix

  !

  interface GigabitEthernet1/0/17

  No auto mdix

  !

  interface GigabitEthernet1/0/18

  No auto mdix

  !

  interface GigabitEthernet1/0/19

  No auto mdix

  !

  interface GigabitEthernet1/0/20

  No auto mdix

  !

  interface GigabitEthernet1/0/21

  No auto mdix

  !

  interface GigabitEthernet1/0/22

  No auto mdix

  !

  interface GigabitEthernet1/0/23

  No auto mdix

  !

  interface GigabitEthernet1/0/24

  No auto mdix

  !

  interface GigabitEthernet1/0/25

  !

  interface GigabitEthernet1/0/26

  !

  interface GigabitEthernet1/0/27

  !

  interface GigabitEthernet1/0/28

  !

  GigabitEthernet2/0/1 interface

  No auto mdix

  !

  interface GigabitEthernet2/0/2

  No auto mdix

  !

  interface GigabitEthernet2/0/3

  No auto mdix

  !

  interface GigabitEthernet2/0/4

  No auto mdix

  !

  interface GigabitEthernet2/0/5

  No auto mdix

  !

  interface GigabitEthernet2/0/6

  !

  interface GigabitEthernet2/0/7

  No auto mdix

  !

  interface GigabitEthernet2/0/8

  No auto mdix

  !

  interface GigabitEthernet2/0/9

  No auto mdix

  !

  interface GigabitEthernet2/0/10

  switchport trunk encapsulation dot1q

  switchport mode trunk

  No auto mdix

  active in mode channel-group 6

  !

  interface GigabitEthernet2/0/11

  No auto mdix

  !

  interface GigabitEthernet2/0/12

  No auto mdix

  !

  interface GigabitEthernet2/0/13

  No auto mdix

  !

  interface GigabitEthernet2/0/14

  No auto mdix

  !

  interface GigabitEthernet2/0/15

  No auto mdix

  !

  interface GigabitEthernet2/0/16

  No auto mdix

  !

  interface GigabitEthernet2/0/17

  No auto mdix

  !

  interface GigabitEthernet2/0/18

  No auto mdix

  !

  interface GigabitEthernet2/0/19

  No auto mdix

  !

  interface GigabitEthernet2/0/20

  No auto mdix

  !

  interface GigabitEthernet2/0/21

  No auto mdix

  !

  interface GigabitEthernet2/0/22

  No auto mdix

  !

  interface GigabitEthernet2/0/23

  No auto mdix

  !

  interface GigabitEthernet2/0/24

  No auto mdix

  !

  interface GigabitEthernet2/0/25

  !

  interface GigabitEthernet2/0/26

  !

  interface GigabitEthernet2/0/27

  !

  interface GigabitEthernet2/0/28

  !

  interface Vlan1

  the IP 192.168.0.1 255.255.255.0

  !

  default IP gateway - 192.168.76.102

  IP classless

  IP http server

  IP http secure server

  !

  activate the IP sla response alerts

  !

  !

  Line con 0

  line vty 0 4

  password Mil19

  opening of session

  line vty 5 15

  password Mil19

  opening of session

  !

  end

  Interface port-channel 6

  (in the example, there should be this line "identified in this channel: Gi2/article-gi1/0/10 0 / 10 ')

  
  

  sailing-sw-1 #show interfaces port-channel 6

  Channel6 port is down, line protocol is down (notconnect)

  Material is EtherChannel, address is 0000.0000.0000 (bia 0000.0000.0000)

  MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive set (10 sec)

  Link auto-duplex type, automatic speed is automatic, media type is unknown

  input stream control is turned off, output flow control is not supported

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry, never, never hang output

  Final cleaning of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 0 bps, 0 packets/s

  5 minute output rate 0 bps, 0 packets/s

  0 packets input, 0 bytes, 0 no buffer

  Received 0 emissions (0 multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  Watchdog 0, multicast 0, break 0 comments

  entry packets 0 with condition of dribble detected

  exit 0 packets, 0 bytes, 0 underruns

  0 output errors, 0 collisions, 1 interface resets

  0 babbles, collision end 0, 0 deferred

  carrier, 0 no carrier, lost 0 0 output BREAK

  output buffer, the output buffers 0 permuted 0 failures

  EtherChannel 6 Summary

  sailing-sw-1 #show etherchannel 6 Summary

  Flags: - Low P - D bundled in port-channel

  I have - autonomous s - suspended

  H Eve (LACP only)

  R - Layer 3 S - Layer2

  U - running f - cannot allocate an aggregator

  M - don't use, minimum contacts not satisfied

  u - unfit to tied selling

  w waiting to be aggregated

  d default port

  Number of channels: 1

  Number of aggregators: 1

  Protocol for the Port-Channel port group

  ------+-------------+-----------+-----------------------------------------------

  6 Po6 (SD) LACP Gi1/0/10 (I) Gi2/0/10 (I)

  Hello

  It seems that the grouping of NIC Linux box does not work properly. Please

  Check on the side of Linux.

  Kind regards

  NT

• You are looking for a Client Installer Stand alone creative cloud

  We are looking for a creative Cloud Stand Alone Client Installer.  We would like to avoid having to download and install it on each client system.  Or I can capture download some how?  Download the current Installer installation in the system somewhere.

  Thanks in advance for any help you might be able to offer

  Ed

  Hello

  If you are using the creative tool packer of cloud, we will build a package depending on the applications you select, and the Desktop Application creative cloud for deployments of user name (login with an Adobe ID). CCP is available from the portal of the teams, site licenses or the deployment of the Enterprise Dashboard tab.

  Adobe Creative Cloud package