Cisco IPS Manager Express

Similar Questions

• Does anyone have a guide to the Cisco IPS Manager Express Administrator?

  Hello.

  Does anyone have a guide to the administrator of the Cisco IPS Manager Express?, I need to update my license some a procedure?, if I have an IPS with Bypass the configuration at the time of the closing of SPI interfaces will license update or will have no affection?

  Thank you.

  Here you will find guides - everything depends on your version:

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/products_installation_and_configuration_guides_list.html

  For example, here is the 7.1 version SEO licenses:

  http://www.Cisco.com/en/us/docs/security/IPS/7.1/Configuration/Guide/IME/ime_sensor_management.html#wp2219086

  Apply a license will not stop interfaces... However, if you apply an update of the signature, you'll stop traffic for a short time during the installation of the signatures up-to-date inspection.

  Hope that helps.

• Cisco IPS Manager Express 7.0.1

  I just want to check if the following works:

  -Under Configuration > IPS > monitoring sensor > time Actons > blocks host is configured correctly

  I joined a few hosts must be blocked and I see the following:

  -On the connection block active tab it shows 'false' for any host that I enter. ???

  Thanks in advance for your help.

  False means that the blocking rule was not lit (not activated)

  This means that someone could have configured the previous rule, however, did not allow it.

  If you click on the 'Add' button, you will be able to see what I mean (the "enable blocking connection" must be checked to block the host configured), and it will show as 'Real' once activate you it.

  Hope that answers your question.

• IPS Manager Express (IME)

  Hello everyone,

  I recently found a new product data sheet - called Cisco IPS Manager Express, looks a bit like a new implementation of the IPS event viewer.

  Currently downloading the software displays an error, but everything else is present.

  Short url is cisco.com/go/ime

  What is someone is aware of this tool? How to download?

  Concerning

  Mathias

  EMI is the next generation of VEI.

  It will keep track of IPS events and will also probe version 6.1 IPS configuration.

  IME is intended for deployment of sensors of 5 or less.

  EMI was announced earlier this week.

  It is in final testing and will be available in the next month or 2.

  IME will be available for download on cisco.com without extra charge for customers with active Service Cisco IPS contracts on their sensors.

  Besides IPS version 6.1 also announced, as well as the AIP-SSM-40 for the ASA firewall.

  IPS version 6.1 is mainly changes to work with the new Editor IME.

  The AIP-SSM-40 is the more powerful version of the AIP-SSM-10 and the AIP-SSM-20 and is meant for use inside the ASA 5520, and ASA 5540.

• IPS manager express

  the cisco IPS manager Express (IME) can be used to manage IPS appliances how to max?

  It can be used to manage up to 10 IPS sensors.

  This is IME sheet for your reference:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html

  Hope that helps.

• IPS Manager Express or Cisco Security Manager?

  Hi all

  We think buy the license for the 5512 IPS - that of above (IPS Manager Express or Cisco Security Manager) is the right tool to read about management purposes? Or I can be selected? If I can choose either, which guy are you advocating?

  See you soon!

  M

  How many systems do you have? If the number is high, the CSM is the way to go. Manage many systems (and keep them in sync with the same political) with IDM and IME is a nightmare. But if it is a single system, the EMI is the right tool for you. It works very well for the follow-up (up to 10 devices) and can also manage them (individually, it is not so easy for more then another system). And it's free.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• ASA/IPS and IPS Manager Express

  I am trying to add my sensor to the IPS Manager Express but I keep the following error. IOException when trying to get certificate:java.security.cert.CertificationExpiredException: notafter Sam may 10 * 2008.

  I'm sure it's simple but can find how to solve this problem.

  Kind regards

  D

  This means that the SSL/TLS certificate on the web server of your sensor has expired on May 10, 2008.

  It is very common for the sensors that have been active for more than a year. When a sensor is generated, it is usually valid for only a year or two.

  You just need to create a new SSL/TLS certificate for your sensor.

  Connect on your sensor and run "tls key generate."

  http://www.Cisco.com/en/us/partner/docs/security/IPS/6.1/command/reference/crCmds.html#wp504369

  But remember that, once you do this, you should make sure attend you all other management systems that connect to your sensor and make sure the management system pulls down and accepts this new certificate (which often requires you to push some type of button I agree to the new certificate).

• 7.1.1 IPS Manager express can not add the device

  I am trying to add my sensors AIP - SSM IPS Manager 7.1.1 (new facility 2003 32bits).

  Java updated, direct connection. I can ping the sensors.

  Error is:

  Could not check config name of username/password [null]

  I can't connect my sensors with IDM 7.0 no problem with the same name of user and password I tried in the Manager of the IPS, but they do not seem to work.

  Any ideas what I am doing wrong?

  Thank you.

  Looks like you're hit bugID: CSCto03344

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto03344

• SSM, Cisco IPS Manager, IPS version 1.0000 E2 module

  When in the EPI manager and I try to make a change to the pilices, I get the following error.

  Failed to retrieve the configuration information for the sensor

  No idea what causes this error.

  Kind regards

  Dan

  Dan-

  If your "IPS" Manager CSM, you should check you have connectivity between the server and the sensor and your CSM is a host that is allowed on the sensor (one day our CSM decided to erase a lot of list of hosts allowed our sensor, how fun).

  You can re-import your sensor in CSM, or I have deleted much troubling problems to simply remove the sensor to the CSM and adding them as new.

• IPS Manager Express - archive of past events

  Hello world

  How to archive or delete old events in IME? .Myd MYSQL\data\alarmDB files become larger and larger, and it affects the server.

  Thank you

  Database files can not just simply be deleted.

  If the IME still works, then you can proceed as follows:

  Select Tools-> Preferences

  Change "maximum number of events in the current event file" and the "maximum number of archived files.

  The maximum number of events to reduce the largest size which can become each event file.

  The maximum number of archived files will reduce the total number of files of database which will be saved.

  You can also want to "Enable time for archiving of events", and temporarilly every 10 minutes.

  So keep an eye on the directory alarmDB in the next hour or 2.

  Continue to modify the settings until you are comfortable with the amount of disk space, it will operate.

  You can also change the archive internal once a day in order to avoid a large number of files small 10 minutes in the future.

  If you need save old alarm information, then you can start by importing the old alarm data before making the above changes.

  Select the file-> export option, then select the desired exported and navigate to a directory on a different disk where you want to create the file.

• Deployment of Cisco IPS 4240 devices

  I can't find all the information about the Cisco IPS 4240 features massive deployments. I have 6 devices, I intend to drive to several remote sites and tie in a centralized unit of Cisco MARCH. Without the help of any CSM/LMS software, is there a quick and dirty to pull this off? I think to set up a single IPS appliance, then pull and distribute the configuration file for the remaining devices. I would like to see how others have done this...

  If all of your sensors are of the same type (all 4240 to your situation) and will execute all the even correct configuration, then the copy command will help out you.

  There is a new feature added to the copy command in IPS 6.1 which will help you during the copying of config of one sensor to another.

  Complete you configure a sensor (using IME, IDM or CLI). When you are satisfied with the configuration, and then use the command copy to copy ON a server of SCP.

  Now bringup a second sensor and configure basic networking through the Installer settings (ip address, gateway, etc...).

  Now, use the command copy to copy the first configuration of sensors from the SCP server in the running of the second probe configuration on the second.

  It will ask you to change the network settings on the second probe.

  Answer n °

  The rest of the configuration of the probe first copy will be placed in the second sensor.

  The second sensor will keep its own unique IP address but win the rest of the configuration of the config of the first probe.

  Continue to do this with additional sensors.

  The process can then be repeated every time that additional changes are made to the first sensor.

  Remember though that this only works if the configuration of the probe will be exactly duplicated (including what interfaces would be monitored and how).

  If each sensor will have some unique tunings, then you need to manage each sensor on its own or buy CSM which can be used to share only parts of the configuration of multiple sensors.

• TCP ports used by Cisco IPS

  I looked up and down by Google and cisco.com for the answer to this, but can do not seem to find it documented anywhere.  I'm looking to identify all the ports that are required to manage a Cisco IPS so that I can open the firewall.  I understand that the following ports are necessary, but I don't know if I am missing anything, please see below:

  TCP 22: Source-online sensor Admin

  TCP 443: Source-online sensor Admin

  UDP 123: Sensor-online NTP Server Admin

  Am I missing something?  Thank you!

  Jonathan

  Boulder, Co

  Jonathon;

  If you do use automatic signatures updates and updates overall correlation, you must also enable the IPS management IP address access TCP 80 (signature and updates to GC) and UDP 53 (updates of the GC).

  Scott

• Cisco Call Manager

  Hi, I want to know whether or not our current phone system uses the CCM? Unfortunately, I know that even with our systems and next thing I know, it's that use us Cisco Configuration Professional utility to configure the phone display names and update the date & time.

  Could someone provide me with the steps to check if we use CCM/CUCM? Sorry to be a beginner.

  Call Manager Express, another acronym which is CUCME - Cisco Unified Communications Manager Express.

  CME/CUCME is function of the router, you can access it via telnet/ssh.

  CUCM can be access through GUI and SSH.

  Kind regards

  Mohammed Noor

• Call Manager Express ATA187 Firmware update

  Hello

  I recorded with Call Manager Express 9.0 to ATA187 but I have a problem for outgoing calls using DTMF, I tried to put dtmf-relay into the pool of register of voice but without success, so I decided to update the firmware.

  the problem when you go to download page you will find a .zip to the file not as before managing the .zup file and the upgrade of the firmware for the express appeal not found in any document because there is no way to upgrade through phones analgo

  No idea how upgade using any way?

  Hi mrmhar1408,

  You must upgrade the ATA 187 for the latest firmware SIP (9.2.3) using this load file, ATA187.9 - 2-3 - 1.loads. It is in the zip file available on the download section of cisco.com to the ATA-187, the name of the zip file is cmterm - ata187.9 - 2-3 - 1.zip.

  The process of upgrading of the ATA and SIP phones 187 s in SIP via CME are listed here. The process is essentially the same for phones and ATAs.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cucme/Admin/Configuration/Guide/cmeinstl.html#wp1067416

  Note that you must also have the load the copied file first in memory flash TFTP server, that would be your router CME flash.

  HTH.

  Kind regards

  Stefano.

• API License - Cisco Security Manager

  I would like to know the license API to integrate a solution Algosec Cisco CSM. This license would cost or not?

  Q. what are the features of the API?

  A. based on the API access Cisco Security Manager to share information with other services essential network such as respect and analysis of advanced security systems to streamline their operations, security and compliance. Using a representational state transfer, external firewall compliance systems can directly request access to data from any security device managed by the Cisco Security Manager. Several suppliers of conformity of safety including Tufin Algosec and Skybox, have updated their products to work with the new APIs in the Cisco Security Manager

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5739/ps6498/qa_c67-727089.html

  I'm waiting for return,

  Aldo Melo Lopes

  Yes. The fare is US$ 5,000.

  The product number is 'L-CSMPR-API' (Cisco Security Manager Pro - license for access to the API).