Call Manager Express ATA187 Firmware update

Similar Questions

• Phone to the Call Manager express license

  Dear,

  Is the license of phone required for Call manager express or the license on the bridge of voice enough to operate the phones?

  Kind regards

  A device license is required for phones on CME. Reference numbers

  FL-CME-SRST-5 =.

  FL-CME-SRST-25 =.

  FL-CME-SRST-100 =.

  Aerts.

• HWIC-AP more Call Manager Express?

  It took me some time and many transfers of tftp to finally find an IOS which works very well with the HWIC-AP (wireless access point module) for a router in 2801.

  What I was asking: is there an IOS which supports both HWIC-AP and also includes the Call Manager Express (CME)?

  What feautures would you find using the IOS search engine?)

  Thanks for all the ideas.

  Marc

  Use the IOS 12.4 (2) T1 or later to support the CME and HWIC-AP

• Call Manager Express has no type 6961

  Greetings

  I have a 1861 with cme 7.1 router (I think, I got this from the show - telephone services) and when I try to add a new phone 6961, I did not have this type of guy.

  Is it something about the compatibility of the cme ip phone or am I missing some configuration?

  Thank you

  Augusto,

  Support for the 6961 started CME version 8.0 for SCCP and 9.0 for SIP

  See the CME software compatibility matrix

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

  Kind regards
  Alex.
  Please evaluate the useful messages.

• Cisco Call Manager

  Hi, I want to know whether or not our current phone system uses the CCM? Unfortunately, I know that even with our systems and next thing I know, it's that use us Cisco Configuration Professional utility to configure the phone display names and update the date & time.

  Could someone provide me with the steps to check if we use CCM/CUCM? Sorry to be a beginner.

  Call Manager Express, another acronym which is CUCME - Cisco Unified Communications Manager Express.

  CME/CUCME is function of the router, you can access it via telnet/ssh.

  CUCM can be access through GUI and SSH.

  Kind regards

  Mohammed Noor

• Airport Express firmware update

  I had a Firmware Update for my Airport Express.

  How can I update? I can only choose ignore, do not to update. In other words, what I did now.

  Zu-updates information to update Firmware as airport-Basisstationen - Apple Support

  It's funny. I think it's a bug.

  Airport-Dienstprogramm 6.3.6 on El Capitan

  "You are not allowed to create or update this content" - funny too.

  This firmware it works now?

  What model is the Express?

  You can do it manually even if it is a bit complicated.

  Re: proxy server annoy 7.6.7 update?

• Cannot run AirPort Extreme or Express 7.7.7 Firmware update-> gray button

  Hello!

  I have an AirPort Extreme and Express stations. Both come with a pill that indicates a upgrade must be performed:

  

  Now, I click on the AirPort Express icon. The following window appears:

  

  He told me that a Firmware update is available. But in this window, I can only select "ignore". I can't select the choice of the update.

  If I click on the "Edit" button to change the settings of the station:

  

  But in the window that appears, the "Upgrade" button is gray:

  

  The same thing happens when I click on the icon of the AirPort Extreme station.

  What is the secret path to the update of the Firmware 7.7.7?

  Thank you

  JHR

  Montreal

  MacBookPro 13 "mid-2012. 10.10.5 OSX

  Click on 'version' and you should be able to update from there on.

• HP zBook Studio G3: zBook Studio G3 - DEATH BY INTEL ME FIRMWARE UPDATE

  WARNING!

  DO NOT INSTALL THE UPDATE OF THE COMPONENT OF THE (COMPANY) INTEL MANAGEMENT ENGINE FIRMWARE!

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8934841 & swItemId = ob_159465_1 & swEnvOid = 419...

  Component Firmware Intel management engine (ME) (American International)

  11.0.0.1194 Rev.A
  December 1, 2015

  We bought 5 of these laptops for our Engineering Department and I was against a tight schedule to get them deployed (the next day). I started working on obtaining a set of installation with the necessary software and then I just want to clone one for the other 5.

  I did a clean install of Windows 10 and installed all the drivers from the HP site. Then I ran Windows updates until everything is up-to-date. I disabled Windows Defender. Now all that remained was update the firmware BIOS, Intel ME and Thunderbolt using the downloaded utilities since the page drivers. The BIOS installed fine, but it's a really weird update process. Due to the beeps and lights blink during his work. There is no progress bar to let you know if she is doing anything. At some point, as the beeping stop but it's still really work. Then he starts and updates another part of the system and so on. Anyway, that everything worked fine. No problem with the update and Windows 10.

  So I ran the update of the Firmware of Thunderbolt and open up a command window saying that it couldn't find the controller. It looks like not there nothing after that point and just closed.

  Finally, I ran the Intel Management Engine firmware update utility. He opens a command window and says that it is loading the file and check and so on. Then he wrote the Flash file and takes a minute or two, doing so. Once it's done, the firm order window and back to business as usual... until you restart. Once you do this, the system is toast. It does not start. Black screen, fans run at high speed and the CapsLock and NumLock bulbs only 5 slow flashes indicating that there is something wrong with the motherboard. I'm starting a supported by HP chat session.

  I am told to disconnect the battery. To access the battery, you need a bit T - 8 Torx and you unscrew 11 screws to remove the grill cover and low fan (pedestal). I did that and disconnected from the battery. Reconnect after a few minutes and tried to start. Nothing, same thing. The support agent told me that a technician on site should be sent to replace the motherboard.

  While the lower lid has been opened, I noticed that there are two small LED lights near the SSD. There are supposed to be the diagnostic lights and I found an article in the service manual indicates if one of the LEDs is lit, the motherboard should be replaced. This lights a few seconds after the connection of the power supply for the laptop or by pressing the power button.

  I asked the support agent if they knew why it happened, but they did not know.

  So, I got 4 portable more to work with. I took off the dead laptop SSD and put a charge in a brand new out of the box. Started by and on the desktop Windows 10. This laptop had BIOS v1.03 on this subject so I ran the BIOS updated and rebooted. All right. At this stage I myself asked to perform other upgrades of the firmware or not. I thought that I had a 50/50 chance and I'm the kind of person that simply be whether it was a fluke or if there really was something seriously wrong with the update of the Intel ME firmware. He ran while first instead of love at first sight to date. Update Intel did ME the same thing before, opened a window to order, checked and then flashed... and after a reboot I got another laptop dead.

  At this point, I shook my head and frowned, looking at the HP logo.

  I tried calling support, but their laptop zbook/computer service has been closed from 10 is no support by phone or chat support. I have to wait until the morning to make a call in warranty for this second laptop dead.

  The Intel ME firmware update released on download of HP ZBook Studio G3 section was not compatible with these laptops and caused the laptop no longer starts. Only an exchange of motherboard could solve the problem. HP since then changed the link to the Intel ME firmware update for the appropriate softpaq.
  
  Those who had run the update of the bad firmware and their laptop brick had to call the HP technical support to schedule a replacement motherboard on the spot.

• USB-9171 installs as USB Flash Firmware Updater

  I just got a USB-9171 with 9401 module.  Try to install it on a laptop Dell Vostro 64 bit WIndows 7. LabVIEW 8.5.1, which works very well with a USB-6212 for awhile is already installed.  I installed the 9.6 NOR-DAQmx that came with the new 9171 and the time of execution of Labview 2012 such as recommended by the Update Manager.  The connection of the USB-6212 he loaded the driver, he recognized in MAX and will work as before.  But plug it in the USB-9171, identifies the driver loaded by Windows as USB Flash Firmware Updater.  The 9171 does not appear in MAX.

  How can I get the USB-9171 driver appropriate to load?

  Thanks - Steve

  Found a solution by calling the service tech.

  Unplug the USB device.

  With the help of MAX, go to tools > reset Configuration data.  This will erase the MAX configuration and restart.

  MAX aperture.  Open the Windows Device Manager.

  Plug the device.

  In the beginning, I received the ball from Windows saying that it successfully installed USB Flash Firmware Updater.  But then on hold while the window updated Device Manager (it flashed several times), he said the right device (cDAQ-9171) as well as the module I connected on the cDAQ-9171, which is a 9401.

  The tech service rep explained that there is a service called Windows device charger OR who must load the appropriate driver, but sometimes the service may stop too soon.

  In any case, I tried all the things here before, but what was different this time was seen both MAX and the windows Device Manager open at the same time before connecting the unit (after wiping of the configuration).

• M277DW: Firmware update is not available...

  I tried to get the scans from the printer to go to my shared network drive (smb) (which is visible on the network)

  I had 3 tech this morning, on the HP chat system, to attempt to repair. 2 of them quit trying after 1 houre, they did not say a word they just closed the connection.

  Still, I wonder if the firmware I have is the most recent: my printer is on firmware # 20150126

  I tried to get you updated by wifi or ethernet, it just says could not connect to the service and to check your internet connection and try a gain. If my firmaware is a bit old and it tries to connect to protocile smb2 since apple (os 10.10) Yosemite as uses a new smb Protocol v3

  the printer configuration page

  Product name: HP Color LaserJet MFP M277dw number of trainer: ZK351Y5 serial number: VNB8H71JH0 cartridge Index: ID Service BMP GKBO: 25253 Firmware Datecode: 20150126 Version of the control panel: 0x15 disable Fax: no Version of Telecom: location 14/04/01: Canada ADF installed: Yes print quality Monochrome of Max: Max 600 x 8 color print quality: number of controller ImageREt 3600 : 12400 duplexer Version: Description of device 0: HP Color LaserJet MFP M277dw language: English default settings: self-managed number asset: Your Company Name: contact person: location of the device: geo location: product safety: Off Wired HW address: 30:8 d: 99:ae:f4:0 has Wireless HW address: 70:77:81:73:a0:63 network in use: Wireless host name: address IPv4 NPIAEF40A: 192.168.2.14 IPv6 address : FE80::7277:81FF:FE73:A063 total memory: 256 MB of memory available: 106,30 MBytes

  HP tech just called and talked consolidated firmware and he could say it was outdated. Sent me a file locally updated the firmware from a reason any, that he was not able to connect to the update service.

  And everything works now! I'm now a happy customer! = D

  BTW the last firmware is currently 20150716

  So with an older firmware needs updating to MAC system 10.10 + to be able to get the records of network works.

• 6921 IPPhone does not register after the firmware update

  Hi all

  We try to update the firmware 6921 phones.

  We have CUCM system version: 8.0.3.20000 - 2

  Current firmware on the phones of SCCPS 6921 is SCCP69xx.9 - 0-3-0.

  We tried to upgrade to SCCP69xx.9 - 4-1-3 SR 1, but the phone will not register with this firmware.

  As we modernize cucm to 10.5 (1), we woud would have all put phones upgraded to the version of the firmware shipped with cucm 10.5 (1) before the cut above miniimize downtime.

  Any suggestions will be helpful on how to solve this problem.

  Thanks in advance

  Hi Ravi,

  I guess you have to download the Pack of the device if you want to use 9.4 (1) SR1

  9.4 release notes (1) SR1 say that

  Before installing the version, check that the device Package Cisco Unified Communications Manager is installed

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/cuipph/6900_series/firmware/9-4-1-SR1/Release_Notes/P690_BK_6AA8901D_00_6900-series-release-notes-9_4_1sr1.PDF

  Now if I see the Compatibility Pack device matrix, it's for CUCM 8.5 (1), but in your case, call Manager version is 8.0.3.20000 - 2

  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html#CMDP_RF_C6E2BC42_00

  regds,

  Aman

• Airport Extreme Base Station model bricks A1408 after failed firmware update

  Shown on Macbook Pro iOS X 10.10.5 airPort utility update the firmware available for both devices on my network 3 June 2016
  1 Airport Express 7.6.7

  2 version of Extreme Base Station Airport unknown as not reported as I expected not die

  After the update successful of the AirPort Express, the update cannot be installed on the Base Station firmware.

  After waiting a while, I tried the update again which also failed to install.

  Current symptoms:

  a. the Base Station is hot indicating energy consumption

  b. No. LED light is during the power on self test or during the race

  c. not discover measure on the WIFI network

  d. is not identified on Ethernet connection without light next to the Ethernet port

  e. DC output is 12V on the connection of the power supply works as expected

  f. cannot perform factory reset using the reset button on the back of the Base Station

  Where other devices working on the same power supply as the Base Station that very sensitive to power outages - these remain functional during the attack of upgrading me to think that he has not lost power while firmware update took place.

  My home network is made entirely of Apple devices - should I worry on the application of the firmware updates in the future.

  It's embarrassing and I now Cat5 running through my house just to maintain services.

  I can't confirm the date of purchase, so I don't know if it is covered by the warranty, however, I'd like to think Apple would cover this.

  What I am doing wrong and y at - it a way to recover the device.

  Help

  We have seen a few posts of users who have had the same problem.

  Unfortunately, not a really nothing you can other your advocate Support of Apple.

  Good luck and hope that you will have this resolved quickly.

• Portege R400 - Firmware update fails for 3G card

  During the Firmwareupgrade of the G 3 embedded (expedite EU870D) in my protégé R400 card, I have a power fail. The next time you start, I can't countinue with the upgrade. The card no longer works.

  The Modem and the COM Ports, I don't see in Device Manager. Is there a solution for this error? Thanks for the help!

  Pumbkin

  Why do the update of the firmware?
  You should do this only if the Vodafone SIM card does not work properly!

  I found this info that pop ups before performing a firmware update!

  + Atten-tion of the FW update: +.

  + Please do not forget to read carefully before place the FW. +

  + 1. FW update is not necessary when the Vodafone SIM card works fine in the customer environment s. run the FW update only when the Vodafone SIM card is not detected. Please note that the FW is more reversible to the previous state once updated. +

  + 2. This upgrade tool will apply to the following models with built-in 3G module: +.

  + Portege R400 +.
  + Portege R500 +.
  + Tecra M9 +.

  + 3. Please leave 3G communication and close the connection utility before running the FW update. +

  + 4. Close all applications before you run the FW update. Please DO NOT launch any application during the upgrade process. +

  + 5. Please ensure that you use an AC adapter to power the computer during the process of FW update. Power failure during the upgrade process can lead to failures of 3 G modem. +

  + 6. Please DO NOT sleep/standby extended/Shut Down the computer during the process of FW update. This can lead in mode 3G +.

  So please first these points before you is trying to update the firmware!

• Portege Z30A - firmware update available for PM851 SSD?

  Someone (else) have a SSD PM851 in their Toshiba Z30A? (Windows 'Device Manager' will show only).

  It has come to my attention that these drives have a serious flaw in their firmware that affect performance.
  Google search for 'firmware 840 EVO performance' to find the patches for the commercial version of the Samsung.

  Y at - it for the PM851 SSD firmware update?

  My Toshiba Z30A delivered with such an SSD.

  I've updated my machine with 840 EVO and I ve installed S... Software Wizard so I was informed about the latest firmware update and I ve installed.
  I ve checked manufacturer s page to support SSDS but I didn t find anything for PM851 SSD so I think that the firmware update is currently not available.

• UJ - 831S - firmware update problem

  I am with a problem updating firmware V1.02 for ' DVD-RAM MATA * a UJ - 831S ", according to press [OK] appears the message"THE TARGET DISK no IS NOT PRESENT", as to decide?

  Hello

  Why did you do any firmware update?
  As far as I know the reader uses the Win operating system drivers.
  Also if you have problems with the drive, you must remove the drive from Device Manager. After the restart of the operating system should recognize the drive again.

  Good bye