IPS Manager Express or Cisco Security Manager?

Similar Questions

• Does anyone have a guide to the Cisco IPS Manager Express Administrator?

  Hello.

  Does anyone have a guide to the administrator of the Cisco IPS Manager Express?, I need to update my license some a procedure?, if I have an IPS with Bypass the configuration at the time of the closing of SPI interfaces will license update or will have no affection?

  Thank you.

  Here you will find guides - everything depends on your version:

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/products_installation_and_configuration_guides_list.html

  For example, here is the 7.1 version SEO licenses:

  http://www.Cisco.com/en/us/docs/security/IPS/7.1/Configuration/Guide/IME/ime_sensor_management.html#wp2219086

  Apply a license will not stop interfaces... However, if you apply an update of the signature, you'll stop traffic for a short time during the installation of the signatures up-to-date inspection.

  Hope that helps.

• Cisco IPS Manager Express

  I'm under IPS Manager Express 7.0.3, followed by several devices of ASA - SSM.  Recently the devices begin to show errors Event Status and sensor health seen in IPS Maine.  When I do a status of the device of the EMI, is getting the following error:

  Unable to get the version of the sensor. Exception: java.security.cert.CertificateExpiredException: NotAfter: Thu Aug 25 14:40:47 GMT + 12:00 2011

  If I delete the device from the EMI and then add it back in, I get the same error when the software tries to connect and so can add the device in IME.  I can't find mention of this in the IME or Online help document in IME software help.  I don't know which certificate software is the reference to.

  Has anyone seen this problem before?

  Thank you

  EDIT: Error nice to server ssl certificates expired on the IPS modules.  Generated new certificates and updated IPSME and CSM to recognize these and now they are all good.

  Hi Mike. Looks like you solved this before an answer was published. FYI (and good documentation incase everyone knows the same question and concludes this discussion), it is well documented here.

• ASA/IPS and IPS Manager Express

  I am trying to add my sensor to the IPS Manager Express but I keep the following error. IOException when trying to get certificate:java.security.cert.CertificationExpiredException: notafter Sam may 10 * 2008.

  I'm sure it's simple but can find how to solve this problem.

  Kind regards

  D

  This means that the SSL/TLS certificate on the web server of your sensor has expired on May 10, 2008.

  It is very common for the sensors that have been active for more than a year. When a sensor is generated, it is usually valid for only a year or two.

  You just need to create a new SSL/TLS certificate for your sensor.

  Connect on your sensor and run "tls key generate."

  http://www.Cisco.com/en/us/partner/docs/security/IPS/6.1/command/reference/crCmds.html#wp504369

  But remember that, once you do this, you should make sure attend you all other management systems that connect to your sensor and make sure the management system pulls down and accepts this new certificate (which often requires you to push some type of button I agree to the new certificate).

• IPS Manager Express (IME)

  Hello everyone,

  I recently found a new product data sheet - called Cisco IPS Manager Express, looks a bit like a new implementation of the IPS event viewer.

  Currently downloading the software displays an error, but everything else is present.

  Short url is cisco.com/go/ime

  What is someone is aware of this tool? How to download?

  Concerning

  Mathias

  EMI is the next generation of VEI.

  It will keep track of IPS events and will also probe version 6.1 IPS configuration.

  IME is intended for deployment of sensors of 5 or less.

  EMI was announced earlier this week.

  It is in final testing and will be available in the next month or 2.

  IME will be available for download on cisco.com without extra charge for customers with active Service Cisco IPS contracts on their sensors.

  Besides IPS version 6.1 also announced, as well as the AIP-SSM-40 for the ASA firewall.

  IPS version 6.1 is mainly changes to work with the new Editor IME.

  The AIP-SSM-40 is the more powerful version of the AIP-SSM-10 and the AIP-SSM-20 and is meant for use inside the ASA 5520, and ASA 5540.

• IPS manager express

  the cisco IPS manager Express (IME) can be used to manage IPS appliances how to max?

  It can be used to manage up to 10 IPS sensors.

  This is IME sheet for your reference:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html

  Hope that helps.

• API License - Cisco Security Manager

  I would like to know the license API to integrate a solution Algosec Cisco CSM. This license would cost or not?

  Q. what are the features of the API?

  A. based on the API access Cisco Security Manager to share information with other services essential network such as respect and analysis of advanced security systems to streamline their operations, security and compliance. Using a representational state transfer, external firewall compliance systems can directly request access to data from any security device managed by the Cisco Security Manager. Several suppliers of conformity of safety including Tufin Algosec and Skybox, have updated their products to work with the new APIs in the Cisco Security Manager

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5739/ps6498/qa_c67-727089.html

  I'm waiting for return,

  Aldo Melo Lopes

  Yes. The fare is US$ 5,000.

  The product number is 'L-CSMPR-API' (Cisco Security Manager Pro - license for access to the API).

• I would like to implement Cisco Security Manager demo and requirement, I have about 500 devices

  I want to implement Cisco Security Manager .demo and requirement, I have about 500 aircraft and which is sutabale also want to access VPN management

  And what is your question?

• Cisco Security Manager

  Hello

  I have a question about Cisco Security manager. We manage approximately 70 firewalls and bought the MSC to manage with policies, etc.

  Is it possible to make changes in SSH or ASDM If Cisco Security Manager is inaccessible?

  I need a way to backup for the configs before I can deploy.

  Any advice will be appreciated

  Kind regards

  Ian Oliver

  You can always return to the local management.

  If you do, you need to be sure to use functionality of the CSM 'Detect changes in band.

  http://www.Cisco.com/c/en/us/TD/docs/security/security_management/Cisco _...

  You need to reconcile and integrate those changes in band CSM once it is available / accessible so that it fit, any change in its baseline for the camera - otherwise he crushes them in the next deployment.

• Cisco Security Manager integration with Cisco ACS troubleshooting

  Hi all!

  I have a problem with the integration between Cisco Security Manager and ACS. I've done the integration, but the identity of the user system doesn't have enough privileges. I know what the problem is, but I don't know how I can change the login of the ACS to the local MSC?

  I found a file that specifies the following:

  Q.

  Is there a backend script or command line interface options to change the ACS to local CicsoWorks connection module?

  A.

  To restore the server LMS ACS local user mode mode, stop the CiscoWorks

  demons and run the following script:

  NMSROOT/bin/perl ResetLoginModule.pl

  (for Solaris)

  NMSROOT\bin\perl ResetLoginModule.pl

  (for Windows)

  Then, restart the daemon.

  I did it, but does not work, any idea?

  Hello

  I guess you can try to go through the question on WSC and GBA integration troubleshooting:

  http://www.Cisco.com/en/us/docs/security/security_management/cisco_security_manager/security_manager/3.0/troubleshooting/guide/rbacts.html#wp1043629

  Few things might have gone wrong:

  1 - this command must be run on the server MCS cmd prompt (make sure that you are not on the client computer)

  2 - NMSROOT is the directory were MSC Server is installed. Is usually c:\Progra~1\CSCOpx

  3. you must stop the deamon Manager before performing this action (and restart)

  For example if the directory is the one above to reset the connection locally, you can try the following:

  net stop crmdmgtd---> that stops the daemon Manager (can be done by the services window)

  c:\Progra~1\CSCOpx\bin\perl c:\Progra~1\CSCOpx\bin\ ResetLoginModule.pl---> restores local authentication

  net start crmdmgtd---> restart the Daemon Manager

  Can you maybe try again and let me know how it goes?

  Thank you

• Install Cisco Security Manager 4.7 on Hyper-V

  Hello

  Our clients want to install Cisco Security Manager on a Machine virtual Windows virtualized with Hyper-V. The only references documentation install the software on a Virtual Machine on Vmware systems.

  Can be installed without problems, and the installation will rely on the TAC if we open a support case?

  Best regards

  David

  While he expected to work (since CSM is essentially an application running on a Windows Server), it is not a system that meets the requirements of the Setup Guide.

  Then... If the TAC has found a problem related to this configuration when you need their help, they would be within their rights to say your installation is unsupported.

• 7.1.1 IPS Manager express can not add the device

  I am trying to add my sensors AIP - SSM IPS Manager 7.1.1 (new facility 2003 32bits).

  Java updated, direct connection. I can ping the sensors.

  Error is:

  Could not check config name of username/password [null]

  I can't connect my sensors with IDM 7.0 no problem with the same name of user and password I tried in the Manager of the IPS, but they do not seem to work.

  Any ideas what I am doing wrong?

  Thank you.

  Looks like you're hit bugID: CSCto03344

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto03344

• Cisco Security Manager license key

  Hello

  We have installed in the Cisco Security Manager version 3.3.1 years back and now want reinstalled on the other server, but do not know the license key.

  Please guide how we can find the license key.

  Thank you

  You should be able to go on the Cisco license management portal and click on view existing licenses for licenses that are related to your CCE identifier:

  https://Tools.Cisco.com/swift/LicensingUI/QuickStart

  You can even use the wizard to transfer the license on the new server as a Rehost license.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• NCS and Cisco Security Manager 4.2 servers

  Hi all

  I spec'ing on two new servers; one is for a box of first NCS and other area of Cisco Security Manager 4.2. I have decided to go with the range servers Cisco UCS, but am a little unsure of something on the said recommended in the datasheet for the AC.

  The NCS data sheet

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5755/ps11682/ps11686/ps11688/data_sheet_c78-650051.PDF

  ... reads as follows:

  ******************************

  If the first Cisco NCS deployment as a virtual appliance on a server provided by the customer, one of the following versions

  VMware ESX or ESXi can be used:

  Version of VMWare ESX or VMWare ESXi 4.1

  ******************************

  This means that the NCS software MUST be be virtualized, or can it be installed and simply turn on something like Windows Server 2008? If Yes, through a serious disk image?

  Secondly,.

  the two servers are running RAID arrays and I was wondering what are your views on the execution of any (OS, Cisco software, records and other data) set on the RAID array, or the OS and Cisco software on a separate boot disk and store data only on the RAID?

  I see no reason why it would not run together on the RAID, but I'm curious to know what you think about it.

  In addition, we are upgrading our WCS courses and I was wondering if some kind of migration is necessary or can we just install fresh NCS on the server and configure it accordingly.

  See you soon,.

  -Dave

  Dave,

  For the first part, the NCS works only as a virtual machine.  You can buy the device hardened to it, but it's still a virtual machine, NCS is presented as a .ova.

  Regarding separate them, with NCS I don't think you'll be able to.

  Steve

• Windows 2003 & Management Center for Cisco Security Agents

  I'm sorry if this question has been asked before, but I was unable to see the answer here.

  The management center of CiscoWorks for Cisco Security Agents can be installed on a Windows 2003 Server?

  I'm asking because I am that it is difficult to find a new server that comes with Windows 2000.

  I'm not in the office at the moment, but I think the version I have is 4.5.

  Thank you

  Ian

  You're welcome and good luck.