IPS Manager Express (IME)

Similar Questions

• IPS manager express

  the cisco IPS manager Express (IME) can be used to manage IPS appliances how to max?

  It can be used to manage up to 10 IPS sensors.

  This is IME sheet for your reference:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html

  Hope that helps.

• Cisco IPS Manager Express

  I'm under IPS Manager Express 7.0.3, followed by several devices of ASA - SSM.  Recently the devices begin to show errors Event Status and sensor health seen in IPS Maine.  When I do a status of the device of the EMI, is getting the following error:

  Unable to get the version of the sensor. Exception: java.security.cert.CertificateExpiredException: NotAfter: Thu Aug 25 14:40:47 GMT + 12:00 2011

  If I delete the device from the EMI and then add it back in, I get the same error when the software tries to connect and so can add the device in IME.  I can't find mention of this in the IME or Online help document in IME software help.  I don't know which certificate software is the reference to.

  Has anyone seen this problem before?

  Thank you

  EDIT: Error nice to server ssl certificates expired on the IPS modules.  Generated new certificates and updated IPSME and CSM to recognize these and now they are all good.

  Hi Mike. Looks like you solved this before an answer was published. FYI (and good documentation incase everyone knows the same question and concludes this discussion), it is well documented here.

• IPS Manager Express or Cisco Security Manager?

  Hi all

  We think buy the license for the 5512 IPS - that of above (IPS Manager Express or Cisco Security Manager) is the right tool to read about management purposes? Or I can be selected? If I can choose either, which guy are you advocating?

  See you soon!

  M

  How many systems do you have? If the number is high, the CSM is the way to go. Manage many systems (and keep them in sync with the same political) with IDM and IME is a nightmare. But if it is a single system, the EMI is the right tool for you. It works very well for the follow-up (up to 10 devices) and can also manage them (individually, it is not so easy for more then another system). And it's free.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Does anyone have a guide to the Cisco IPS Manager Express Administrator?

  Hello.

  Does anyone have a guide to the administrator of the Cisco IPS Manager Express?, I need to update my license some a procedure?, if I have an IPS with Bypass the configuration at the time of the closing of SPI interfaces will license update or will have no affection?

  Thank you.

  Here you will find guides - everything depends on your version:

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/products_installation_and_configuration_guides_list.html

  For example, here is the 7.1 version SEO licenses:

  http://www.Cisco.com/en/us/docs/security/IPS/7.1/Configuration/Guide/IME/ime_sensor_management.html#wp2219086

  Apply a license will not stop interfaces... However, if you apply an update of the signature, you'll stop traffic for a short time during the installation of the signatures up-to-date inspection.

  Hope that helps.

• ASA/IPS and IPS Manager Express

  I am trying to add my sensor to the IPS Manager Express but I keep the following error. IOException when trying to get certificate:java.security.cert.CertificationExpiredException: notafter Sam may 10 * 2008.

  I'm sure it's simple but can find how to solve this problem.

  Kind regards

  D

  This means that the SSL/TLS certificate on the web server of your sensor has expired on May 10, 2008.

  It is very common for the sensors that have been active for more than a year. When a sensor is generated, it is usually valid for only a year or two.

  You just need to create a new SSL/TLS certificate for your sensor.

  Connect on your sensor and run "tls key generate."

  http://www.Cisco.com/en/us/partner/docs/security/IPS/6.1/command/reference/crCmds.html#wp504369

  But remember that, once you do this, you should make sure attend you all other management systems that connect to your sensor and make sure the management system pulls down and accepts this new certificate (which often requires you to push some type of button I agree to the new certificate).

• 7.1.1 IPS Manager express can not add the device

  I am trying to add my sensors AIP - SSM IPS Manager 7.1.1 (new facility 2003 32bits).

  Java updated, direct connection. I can ping the sensors.

  Error is:

  Could not check config name of username/password [null]

  I can't connect my sensors with IDM 7.0 no problem with the same name of user and password I tried in the Manager of the IPS, but they do not seem to work.

  Any ideas what I am doing wrong?

  Thank you.

  Looks like you're hit bugID: CSCto03344

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto03344

• IPS Manager Express - archive of past events

  Hello world

  How to archive or delete old events in IME? .Myd MYSQL\data\alarmDB files become larger and larger, and it affects the server.

  Thank you

  Database files can not just simply be deleted.

  If the IME still works, then you can proceed as follows:

  Select Tools-> Preferences

  Change "maximum number of events in the current event file" and the "maximum number of archived files.

  The maximum number of events to reduce the largest size which can become each event file.

  The maximum number of archived files will reduce the total number of files of database which will be saved.

  You can also want to "Enable time for archiving of events", and temporarilly every 10 minutes.

  So keep an eye on the directory alarmDB in the next hour or 2.

  Continue to modify the settings until you are comfortable with the amount of disk space, it will operate.

  You can also change the archive internal once a day in order to avoid a large number of files small 10 minutes in the future.

  If you need save old alarm information, then you can start by importing the old alarm data before making the above changes.

  Select the file-> export option, then select the desired exported and navigate to a directory on a different disk where you want to create the file.

• Cisco IPS Manager Express 7.0.1

  I just want to check if the following works:

  -Under Configuration > IPS > monitoring sensor > time Actons > blocks host is configured correctly

  I joined a few hosts must be blocked and I see the following:

  -On the connection block active tab it shows 'false' for any host that I enter. ???

  Thanks in advance for your help.

  False means that the blocking rule was not lit (not activated)

  This means that someone could have configured the previous rule, however, did not allow it.

  If you click on the 'Add' button, you will be able to see what I mean (the "enable blocking connection" must be checked to block the host configured), and it will show as 'Real' once activate you it.

  Hope that answers your question.

• Phone to the Call Manager express license

  Dear,

  Is the license of phone required for Call manager express or the license on the bridge of voice enough to operate the phones?

  Kind regards

  A device license is required for phones on CME. Reference numbers

  FL-CME-SRST-5 =.

  FL-CME-SRST-25 =.

  FL-CME-SRST-100 =.

  Aerts.

• HWIC-AP more Call Manager Express?

  It took me some time and many transfers of tftp to finally find an IOS which works very well with the HWIC-AP (wireless access point module) for a router in 2801.

  What I was asking: is there an IOS which supports both HWIC-AP and also includes the Call Manager Express (CME)?

  What feautures would you find using the IOS search engine?)

  Thanks for all the ideas.

  Marc

  Use the IOS 12.4 (2) T1 or later to support the CME and HWIC-AP

• SSM, Cisco IPS Manager, IPS version 1.0000 E2 module

  When in the EPI manager and I try to make a change to the pilices, I get the following error.

  Failed to retrieve the configuration information for the sensor

  No idea what causes this error.

  Kind regards

  Dan

  Dan-

  If your "IPS" Manager CSM, you should check you have connectivity between the server and the sensor and your CSM is a host that is allowed on the sensor (one day our CSM decided to erase a lot of list of hosts allowed our sensor, how fun).

  You can re-import your sensor in CSM, or I have deleted much troubling problems to simply remove the sensor to the CSM and adding them as new.

• Call Manager Express ATA187 Firmware update

  Hello

  I recorded with Call Manager Express 9.0 to ATA187 but I have a problem for outgoing calls using DTMF, I tried to put dtmf-relay into the pool of register of voice but without success, so I decided to update the firmware.

  the problem when you go to download page you will find a .zip to the file not as before managing the .zup file and the upgrade of the firmware for the express appeal not found in any document because there is no way to upgrade through phones analgo

  No idea how upgade using any way?

  Hi mrmhar1408,

  You must upgrade the ATA 187 for the latest firmware SIP (9.2.3) using this load file, ATA187.9 - 2-3 - 1.loads. It is in the zip file available on the download section of cisco.com to the ATA-187, the name of the zip file is cmterm - ata187.9 - 2-3 - 1.zip.

  The process of upgrading of the ATA and SIP phones 187 s in SIP via CME are listed here. The process is essentially the same for phones and ATAs.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cucme/Admin/Configuration/Guide/cmeinstl.html#wp1067416

  Note that you must also have the load the copied file first in memory flash TFTP server, that would be your router CME flash.

  HTH.

  Kind regards

  Stefano.

• management of the PDBs with Oracle Enterprise Manager Express

  Hello

  is 12 c, possible to manage the PDBs with Oracle Enterprise Manager Express?

  How to find the URL?

  When I run select dbms_xdb_config.gethttpsport (double); on a PDB file, it returns no rows.

  More tutorials

  https://Apex.Oracle.com/pls/Apex/f?p=44785:24:4833387311898:P24_CONTENT_ID, P24_PREV_PAGE:6282, 24

  I have not seen.

  Thank you.

  is 12 c, possible to manage the PDBs with Oracle Enterprise Manager Express?

  Yes - but you will not have the COMPLETE management functionality. See the FAQ doc:

  http://www.Oracle.com/technetwork/database/manageability/emx-CDB-1965987.html

  Can I Plug and unplug the PDBs with EM Express?

  No, EM Express does not all CBD management capabilities in DB 12.1.0.1.0.

  Review ALL sections of doc

  How to find the URL?

  When I run select dbms_xdb_config.gethttpsport (double); on a PDB file, it returns no rows.

  Have you set up EM and set the port to the PDB? Again - see the FAQ doc

  http://www.Oracle.com/technetwork/database/manageability/emx-intro-1965965.html#A5

  How can I configure EM Express on CBD and APB?

  Users can configure EM Express at the root and container of the PDB, with each container using another HTTP/HTTPS port.  When it is connected to the root container, the information displayed are the entire database, including all PDB files.  When it is connected to a PDB file, displayed information is limited to the PDB data.  For more information, see the section on EM Express on the CBD.

  http://www.Oracle.com/technetwork/database/manageability/emx-intro-1965965.html

• What IP address will be used for sending a test e-mail in the express IPS Manager?

  Hi all

  I intend to use the IPS Maine e-mail notification feature.

  There is a question confused me. The test Email can work only half the time, again can't.

  I want to know what IP address will be use for this SMTP connection.  Maybe I used an ACL to allow this traffic.

  Does anyone know what the problem is for this?

  My camera is 5585 X with IPS SSP20.

  Hello

  There should be no blocking communication between the host of the EMI and your SMTP server. Check if the communication is fine.

  Kind regards

  Akshay Rouanet