Cisco ISE v1.1.3 living with OpenLdap

Similar Questions

• Cisco ISE 1.3 - Mab authentication with a vlan for each foor

  Hello

  A client wants to implement authentication MAB with a vlan for each floor. I found a solution of Loïc

  I have set up the following:

  -the profile of different authentication with a vlan different.

  -Add the endpoint (printer etc) endpoint identity.

  -create endpoint group identity that end point of recall.

  -create a rule to authorizzation reminding all work and element... in the end.

  Do you know if there is a faster way where another way to solve the problem?

  Thank you all

  Well, mab in some environments, could be replaced by profiling and for rules, rather af with a rule authz for each floor, you can name your VLAN in your eponymous switches to "Printers", in the world, then you would only need an authz rule, where you use the name of the vlan instead of identification number, so no matter where this printer , it will end in the vlan 'Printer', whatever it is in this specific switch.

• OpenLdap Cisco ISE 1.2

  OpenLdap is supported by Cisco ISE 1.2?

  When I try to "Connect to Test Server" I get results so the connection seems fine. However when I put in place the policies for a wlan with wpa2 authentication base it says "Invalid password". When I put my user name in the folder attributes it finds my id, so I don't know the link works fine.

  

  Jeroen,

  Take a look at the support matrix:

  http://www.Cisco.com/en/us/docs/security/ISE/1.2/user_guide/ise_man_id_stores.html#wp1346303

  If you use the (any) LDAP + PEAP-MSCHAP, i.e. what people want to do quite often... it won't work.

  M.

• Cisco ISE with GANYMEDE + and RADIUS both?

  Hello

  I'm wired opening of authentication on a network using Cisco ISE. I studied the conditions for this. I know that I need to enable the RADIUS on the Cisco switches on the network. The switches in the network are already programmed to GANYMEDE +. Anyone know if they can both operate on the same network at the same time?

  Bob

  I suppose that Ganymede is configured (with ACS 4.x or 5.x) for the peripheral administration via telnet/ssh, and now you need the RADIUS (radius) to authenticate 802. 1 x. Yes they can both work on the same network at the same time.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Cisco Ise 1.3 with Flex to connect wireless supported function

  Hello

  My environment is formed ROUND of flex-mode connection wireless and cisco Ise 1.3, these features are supported?
  Basic functions of the AAA
  profiling
  posturing
  Substitution VLAN
  Substitution of the ACL
  Comments commissioning

  TrustSec 2.0 this MDC is not supported? someone try this feature?

  These all work with ISE 1.3 and FlexConnect WLAN.

  You need the right license ISE - the type of mobility (wireless) license will cover everything. If you have wired and wireless, then you must have basic (for most features) + more (for profiling) + Apex (for Posturing).

• SealthWatch intrgration with Cisco ISE-3315

  Hello Experts,

  I have Cisco ISE-3315 version 1.3

  Can I order and SealthWatch Lancop and use it with this series of ISE 3315? Or I must have the SNS?

  Hi Imran-

  3315 unit supports all personas running ISE 1.3

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-3/Release_notes/ise13_rn.html#pgfId-527567

  Now, that being said, don't forget that this devices has a lot less resources compared with the NHU devices. So, if you decided to run all personas on it then you will be greatly limited the number of concurrent endpoints.

  Thank you for evaluating useful messages!

• The band multiple @domaine used in user name on the integration of commercials with Cisco ISE?

  Hello

  How to remove multiple domain suffixes through ISE with AD user name used as an external identity Source. Username is used in [email protected] / * / format.

  Cisco ISE 1.2 patch introduced 4 Strip prefix or suffix @domaine Kingdom of the username through ISE with AD used as external identity Source. But the documentation is not updated for this feature. I am able to band 1 domain successfully suffix but following conditions listed in the list of suffixes fails to get stripped.

  Any thoughts on the same.

  Thanks Kumar

  In the ISE under Administration > identity management > external identity Sources

  Choose the Active Directory on the left, select your ad server and Advanced settings

  Under identity band of suffix, make sure prefixes band below: is selected (I know, it says prefix).

  In the list of Suffixes box, enter your list of domain suffixes to undress.  The separator character is a comma (,).

  

  If this does not solve your problem, then I fear that a call to TAC may be in order.

  UPDATE *.

  Spaces are significant characters.  The registration of domains, so as such:

  @domain.com, @domain.local, @testdomain.com

  END UPDATE *.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

  Post edited by: Charles Moreton

• Cisco ISE 1.1.1 with Windows posturing

  Hello

  We tired for configured windows posturing here's the scenario

  We saw five ise boxes 3315 with version 1.1.1 off them 2 is admin, 2 is PS and 1 MNT

  and we have local Symantec and WSUS Server.

  We make posturing for Windows where I have a few questions

  (1) is there an integration here of the local WSUS server with Cisco ISE where Cisco ISE can automatically take all the mandatory WSUS update according to the crititcality of the WSUS server.

  (2) what is advised to set up the strategy of the Posture of the posture of windows in Cisco ISE and if manually configure windows political posture using specific KB and if there is an update available on Microsoft will we be able to configure the policy for the new update.

  (3) we have configured authentication dot1x in cisco ise and asked as well as on switch port where once the user must be connected to dot1x port of the switch it invites username and password dot1x and therefore, authorization policy, it gives vlan appropriate dynamics.

  But what are the ways where we can restrict the machine which is rather than the assets of the company and even if the user's user name and password in short any employee aware how we can restrict the user making the machine rather than the assets of the company?

  (4) can configure US policy posture for antivirus which will keep us in normal mode and at the same time, we can put posturing for windows which monioring mode which only monitor policy posture and reflected in the monitoring, log in which does not restrict the network for windows posturing

  That will be great if any one can please help me to get the issues

  Thank you

  Pranav

  What follows is under the POLICY-OF ELEMENTS of STRATEGY-POSTURE-> REQUIREMENTS > >

  

  What follows is located under

  POLICY OF-> ELEMENTS OF STRATEGY-> POSTURE->

  REPAIR-> WINDOWS SERVER UPDATE SERVICES REMEDIATION ACTIONS

  

  What follows is part POLICY-> POSTURE

  

  These settings work ALMOST flawlessly for me by forcing her we approved on our WSUS server for our group of workstations updated (all of our laptops are members of the) which meet the criteria of severity EXPRESS (critical and Important). Now, what I've discovered in the last few days is that... MS seems a bit random in their identification of what severity level they assign to their updates. For example... I think that a service pack of the operating system would be considered IMPORTANT if not CRITICAL... however... Look at this from the identification of the server WSUS from Windows 7 Service Pack 1:

  

  Thus, those who updates you deleted, I'd go throgh your WSUS server to identify how they are identified by gravity, then according to your needs set the parameters of the ISE accordingly to ensure that you get updates you plan.

  Hope this helps everyone out there who has similar problems.

  Thank you

  Dirk

• Integration of CISCO ISE with another controller wireless lan of the seller

  Hi all!

  I am currently working on an assignment and eager to integrate the identity service provider in the network. the only problem is that the deployed wireless network earlier of another provider I just need to know that either ISE has integration with the other controller feature wireless provider and can provide guest access control. The LDAP integration is also required.

  Waiting for help!

  Hello

  According to my knowledge Yes, Cisco ISE can be integrated with another controller wireless LAN of the seller, but limited. (Aruba, Rukus) and if you want to add the external identity group to your network, then LDAP integration is required.

• CIsco ISE with HP and Fortigate

  Hello

  I configured the switches HP 5820 X and 5130 for authentication radius AAA with Cisco ISE 2.0.0.306.

  The switch receives the response from authorization successful; but unable to connect. What are the Advanced profile Radius authorization attributes in

  ISE?

  In addition, ISE supports Fotigate firewall?

  Oh and Yes ISE supports any device using the RADIUS in accordance with rfc, it is usually only a question about this that av-pairs to send to that specific device, there is not really standard for this.

• Cisco ise license command

  I have a question

  1. is it possible to install the Cisco ISE software on the server machine to physical HP (without solution VMware or without the use of SNS-3415-k9 cisco device)?

  2. for 2500 users online, I'll order L-ISE-BSE-2550, L-ISE-PLS-S-2500 and L-ISE-APX-S-2500 of basis, more and apex licenses. My question is HA (primary and secondary) application I need 2 licenses for each? (2 * L - ISE - BSE - 2550, 2 * L - ISE - PLS - S - 2500 and 2 * L - ISE - APX - S - 2500)

  or just a license for each is enough?

  3. If I implement Cisco ISE and HA on VMware environment, can I 2 L-ISE-VM-K9 licenses for each VM machines? and also I need 2 licenses for each basic, plus, and at the apex?

  4. What is smart net Cisco and Cisco SASU? need to buy these for support and ticketing system?

  5. What is license for cisco anyconnect (L-AC-APX-1 year-G)?

  thnx in adv.

  You can install ISE on a HP ONLY Server if you are using software virtualization (VMware or KVM).

  The Guide of Installation of ISE sets out three options:

  1 hardware appliance from cisco SNS

  2. virtual machine VMware

  3 Linux KVM.

  The AnyConnect license is required to qualify with the features of the Apex. It is not installed on the ISE server, however.

• Cisco ISE 1.1.2.145 Admin authentication via the LDAP protocol

  I have configured the LDAP protocol and able to retrieve our LDAP directory structure. Now, I'm trying to point authentication "Admin Access" Source 'External identity', which is the new LDAP IS I created. But I couldn't find an option to authenticate locally if for some reason the LDAP configuration does not work. I learned that the ISE can automatically return to local auth as external sources Idenitity are inaccessible. How can I test the LDAP authentication with breaking them our Admin Access? I thought to open two parallel sessions, one with Super Admin account Local and one with the domain account. But I noticed that ISE communication is smart enough for the closing session/connection no matter what other sessions in different browsers so, basically, I can't open two parallel sessions the same machine to test. Suggestions? or am I missing something here?

  Thanks in advance.

  Hi Srinivas,

  Even if you configure LDAP as a source of external identity of admin access, you can always internal relief without having locked. According to the ISE user guide:

  During the operation, Cisco ISE is designed to "fall back" and try to perform the internal identity database authentication, if the communication with the external identity store has not been established, or if it fails. In addition, whenever an administrator for which you have configured external authentication launches a browser and initiates a logon session, the administrator must still the option authentication of demand through the local Cisco ISE database by choosing 'Internal' to the Selector drop-down storage of identity in the Connect dialog box.

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/user_guide/ise_man_identities.html#wp1351543

  Please see the attached screenshot by my lab ISE:

  

  I configured the admin authentication against AD, but I still see both 'Internal' and 'AD' at the time of the connection.

  I hope this helps.

  Thank you

  Aastha

• Cisco ISE

  Hi all

  I intend to implement cisco ISE in my network. I have 1000 endpoints and some mobile devices. I plan to use approach distributed and all licenses possible.

  It is: should I buy licenses for all nodes. For example 1000 for the head node, 1000 for high school, 1000 for surveillance and so forth?

  Or should I buy license only 1000 (I mean 1000 base + 1000 advances + 100 mobile) ones and apply them to all nodes?

  Concerning

  Max

  Hi Max.

  ISE is authorized by the deployment. So if you have a distributed with us deployment will tell ISE 10 nodes or servers you will always only the node main Administrator license.

  Now, if you plan to have two deployments (say a deployment for the EMEA region and the other for APAC) then you would need licenses for both deployments (you allow the node primary admin in each deployment).

  I hope this makes sense :)

  Thank you for evaluating useful messages!

• Cisco ISE (Identity Services Engine) - seeds SGA device?

  Hello

  We have a LAB with Cisco ISE, certificates and list DACL. Everything works fine with the 1.1.1 version but now we want to use the functionality of CMS - SGT instead of the ACL and we found that we need seed for this device and the only device that takes in charge the Nexus 7000 is. Is this true? What is the only way that we can use LMS - SGT? Are there plans that any other device will be used to seed device?

  BR, Marko

  The device of seed set as first device that communicates with the ISE. It must be a link.

  http://www.Cisco.com/en/us/docs/solutions/enterprise/security/TrustSec_2.0/trustsec_2.0_dig.PDF

  In addition the Nexus needs a license of Advanced Services installed in order to support the Trustsec.

  I can't comment on any future plans.

• Group of endpoint Cisco ISE 1.4 hotspot

  Patch 1.4 Cisco ISE 6

  Cisco WLC 8.0.121

  Setup

  the WLC has a named Hotspot SSID. It uses mac auth with radius of the NAC to redirect to the Hotspot portal of reviews on the ISE.

  drops flexconnect users in vlan 401 (with preAuthAcl), after the PSU, it is initially a COA to move users to VLANs 413 with permitInternetAcl

  Description of the problem:

  users connect to the SSID of the access point and get an IP address valid in vlan 401

  redirected to the page of the hotspot on the ISE with a PSU and the PIN code request.

  are they disconnect from the network and reconnect, the ISE sends a certificate of authenticity to move to 413 without the Hotspot portal.

  what I've noticed, is that as soon as users get the redirect of the original Web page, they are moved to the endpoint group defined in the hotspot portal.

  What I've read about this behavior makes me understand that it is a default behavior, but if that's the case then I'm not sure on how I can make my font to check if the PSU has been accepted.

  Thank you

  Maarten

  Portal.PNG

  

  Policy.PNG

  

  Profile.PNG

  

  Cisco WLC 8.2.100

  Patch 1.4 ISE 6

  Similar Hotspot ISE installation, of similar rules except change VLAN. I have observed the same behavior.

  This configuration was working on patch 5.

  Update:

  I found a solution based on the following bug. Use the following attribute in the authorization rule. The success page remains but no Instant Internet access is available using this workaround solution.

  https://Tools.Cisco.com/bugsearch/bug/CSCux22558/?referring_site=bugquic...

  ' Workaround:
  "Use the LEAST 24 endpoints: LastAUPAcceptanceHours for example (means PUA agreed less than 24 hours ago).