Cisco telepresence video Communication Server (VCS) - compatibility CTX X8.1.1?

Similar Questions

• Video Communications Server "off call an impact."

  Hello

  I work with video Communications Server 8.1 and Lync 2013 trying to get them to work well together in a lab environment. In demo mode, the number of calls of course in demo mode is defined for a single call of course, a non-traversal call and three inscriptions. When I make a call between the two environments, in the system logs, I can see my Tandberg user successfully finding my user Lync in a test call. I see so two followed indicating error messages that the "resource unavailable - call resources" and "temporarily unavailable".

  It seems that I have at least a part of this correct installation (according to Cisco Tandberg and LYnc for VCS 8.1 configuration guide), but the demo license can prevent a successful of the set up call. Anyone can check it please what I see and my assumption is correct but also suggest where I can get a 30 day trial or something similar license that will allow me to use this environment?

  I thank all for the display and help, you may be able to provide!

  You did not mention how you have your registered your VCS - end point is H.323 or SIP or double registered?

  A VCS-> Lync appeal would use a traversal license.  This call is a SIP call, if your endpoint is H.323 endpoint, you need another license of crossing to the H.323-> SIP Interoperability - so it would be two crossed licenses (and the demo has only one).

  If you save your end point with SIP rather than H.323 for VCS, this should remove the interoperability (and reduce the permits required by one) so you should then be able to make a call (although without the authorization of "Microsoft Interoperability", you can still not get things 100% working).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Cisco TelePresence error Content Server Login

  Cisco TelePresence Content Server v5.3 build 3316

  When I try to log in to Cisco TelePresence Content Server, it is not verfying the administrator username and password. Later, I have to enter link below and enter the administrator username and password and it is letting me.

  http://10.7.1.38/TCS/#page:login & rescue: true

  Kind regards

  Mohammad

  Hi Mohammad,.

  The link you are trying is the TCS rescue mode. The reason for its non audit admin uname & pwd you might have changed the authentication settings on the site settings page. If authentication earlier was local and you have changed domain or LDAP then TCS will try to authenticate by using this mechanism and will not take admin local credentails.

  To avoid this, once connected via rescue link, create a user with admin rights

  Configuration > users and groups > add users and group > add a user with rights to site manager

  Log out and then try looging with the user that you created. It works perfectly.

  This also happens when earlier you use domain authentication and you've changed your LDAP authentication or vice versa. Creation of the user with rights to site manager is so important before you change the authentication mechanism.

  Hope this information helps.

  Please rate if you find it useful.

  Kind regards

  Gerard

• Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015

  Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!

  I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.

  How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?

  • Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
  • AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
  • Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.

  I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.

  Kind regards

  Acevirgil

• Video of Jabber Cisco Telepresence band bandwidth provisioning

  Hello

  We have deployed video jabber cisco for telepresence 4.5 with VCS 7.2 and TMS 13.2.2.  We use jabber to take interviews. The candidates will be sent the link to download the jabber with the required authentication settings. The Jabber is configured with the Public Max and minimum bandwidth of 768 Kbps.

  My question is related to the downspeed of bandwidth. If we configure the bandwidth of 768 Kbps prvosining and internet bandwidth of candidates is less than 768 Kbps will be the Downspeed VCS to accroding appeal to the bandwidth of the network of candidates.

  for example if my internet connection from home is just 512 Kbps and the use of the jabber to make a call to ex90 in my office. Bandwidth settings is preconfigured in the jabber as 768 Kbps. When the call is established will be VCS downspeed the call at 512 Kbps.

  Krishna.

  You cannot configure a minimum bandwidth, which is always the maximum bandwidth jabbervideo will use.

  The user can only set this value downward but not upward, but as the client detects a loss and stores a database

  with information on used networks recently and its quality.

  So, should not be a big problem the faster speeds available and allow the customer to do magic.

  I woud recommend to (re) read the Jabber_Video_Administrator_Guide

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/MOVI/admin_guide/Jabber_Video_Administrator_Guide_4-5.PDF

  This gives you more information concerning automatic bandwidth adaptation and capabilies of bandwidth detection.

• Content Server Cisco telepresence - separate content

  We have a Cisco Telepresence Content server v5.3 build 3486.

  My client is looking for a recorded video to divide without content. Kindly advice how to do it. Please note that it is a recorded video.

  I went through the models that we have to TCL, but there just passing through, joined, stacked and PIP.

  If you already have a record that contains content, that content is displayed, there no deactivation part as it is already registered.  I noticed you questions about video recording without content in another discussion, I hope this is helpful in this case.

• Is any impact of a change of the password of the local user account on an instance of a content server Cisco TelePresence virtual computer?

  Hello

  I'm looking to see if there is an impact to change the password of the local user account on an instance of a content server Cisco TelePresence virtual machine?

  The software version is v6.2 build 4073.

  Thank you in advance,

  Robert

  I'll assume, you are referring to the administrator account, but it can be applied to any local account which is located on the TCS server itself.  It has no impact to change the password, unless you are using doesn't say account to connect to the server of TCS or web interface, it will not affect the application of TCS as most things such as external storage or clustering rely on domain accounts and not the local server.

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• Cisco UCS-C210 M1 accredited for Unified Communications server

  Hello:

  Our VAR tells us that HP and Cisco are splitting up.  We are an HP store today and 7800-H series MCS routers were a perfect fit.  Our VAR tells us now that he must go with the renamed IBM systems.  BUT I would avoid the IBM servers.  And attractive servers Cisco.  But I have been unable to determine if the Cisco UCS-C210 M1 server is certified for various applications of Unified Communications (Manager of Communications, unity, Cisco Emergency Responder, ICM, CVP, etc.).

  Has anyone heard of Communications deployments unified on the hardware of the UCS?

  Thank you

  Ken

  UCS blades are being qualified for management of the applications of the CPU now. The qualification of rack mount server is expected, specifically the C210 later this summar I think.

• The implications of Cisco Telepresence server operation mode

  I have a CISCO Telepresence server that is currently running in mode managed locally, if change you it remotely and add it to my TMS, will I lose all my permament locally created conference rooms? (be they get deleted?)

  Thank you!

  HI Douglas.  TS blade didn't need to be mode remotely managed so that it can be managed by TMS.  This mode is used for the management as a conductor Telepresense.

  When it was presented, was 3.0 TS.

  Release notes:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TS/release_note/Cisco_Telepresence_Server_Release_Notes_3-0_2-24.PDF

  Page 2 pretty much answer your questions here.

  If your not using a conductor or by using your own program API to use TS in this mode, its better to leave behind in managed mode and add the system to MSD and leave it that way.  This is the normal operating mode if you use the TMS.  Let in managed mode locally, add it to the TMS and you can book etc. against it using TMS meetings.  If automatic discovery is enabled in TMS, permanent meetings should appear in the CCC.

  I hope this helps.

  VR

  Patrick

• Driver of Cisco Telepresence - room LoopBack

  Hello world

  Is it possible to create a meeting room on Cisco Telepresence driver that will return the video to the appellant alone in the room? As the [email protected] / * / Cisco's Sip URI? (A kind of selfview room)

  Thanks for your help.

  It is possible to show only one participant connected to a MCU conference selfview, but not for telepresence Server conferences.  It comes without caring if the driver is involved or not.  The service provided by Cisco closure is obtained with the C40/60 endpoints where the audio and the video plays in a loop directly to the connected call (output HDMI to HDMI-in, output audio RCA audio-in RCA/RCA).

• Cisco TelePresence

  Dear all,

  I am new to Cisco TelePresence, and I want to learn this technology.

  Can anyone share implementation guides or desgin from the point of view of learning.

  I'll be very grateful.

  Kind regards

  Malik.

  Hi Malik.

  Here are some links... However if you are looking for the community you get simillar multiple threads

  http://www.Cisco.com/en/us/docs/voice_ip_comm/uc_system/design/guides/videodg/videodg.PDF

  http://www.Cisco.com/en/us/docs/solutions/enterprise/video/TP-book.html

  see you soon

  Alok

• Office Communications Server 2007 R2.

  Office Communications Server 2007 R2.

  My OCS R2 server is fully functional internally. I have a problem with Live Meeting, audio sound system works internally without any problems, but when my external users connected to the live video meeting worked well but Microphone icon is grayed out for all users. I've been checking all the settings and everything looks ok. Can someone help me please...

  This question is part of better in the TechNet forums, where server gurus hang out.  This forum supports people who have questions or problems with Windows and the performance of their computer.

• Configuration of the firewall Cisco Telepresence MCU 5320

  Hi all.

  I searched all the documents of the MCU again, but I found nothing on the ports it uses.

  Help me

  HI Sandra.  The 5320 MCU is the same as 4500 MCU.

  Incoming ports

  • FTP - TCP:21 + transient (dynamic rather than fixed) used TCP ports for passive mode
  • HTTP - TCP:80
  • HTTPS - TCP:443
  • H.323 - TCP:1720 + ephemeral TCP ports for incoming calls
  • SNMP - UDP:161
  • Outgoing calls to H.323 involve ephemeral ports TCP connections TCP TCP:1720 and a certain number of ephemeral TCP ports
  • Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5060
  • Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5061
  • Outgoing interruptions SNMP are sent the ephemeral ports UDP Port 162
  • Media (including audio and video, FECC messages) are ephemeral ports from ephemeral ports UDP.
  • The products acquired Cisco TANDBERG/Codian and gateway series series Cisco TelePresence allocate the ephemeral ports between 49152 to 65535 *. It is possible to change the ports on which these products receive and establish connections. For example, by default the Codian products Cisco acquired listen port 1720 H.323 calls and connections to port 80 web browser, but these can be modified (go to network > Services).

  Keep in mind this MCU does not support the streaming or conference me and have either the GK aboard.  If these ports are listed.

  The link to the Article can be found here:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/articles/conferencing_products_conferenceme_ports_used_kb_3.shtml

  VR

  Patrick

• Cisco TelePresence SX20 with laptop

  I use a Cisco TelePresence as autonomous SX20 endpoint configured with a public IP address (in Pakistan). I want to connect a portable computer (to Canada) to start video conferencing using the portable camera. Please advice me the software to install on the laptop so that I can start with my SX20 videoconferencing based on IP configured on my SX20.

  To understand kindly refer to the disposal of partner network.

  Please help me its urgent.

  Hello

  www.ciscojabbervideo.com

  BR Oleksandr