Video of Jabber Cisco Telepresence band bandwidth provisioning
Hello
We have deployed video jabber cisco for telepresence 4.5 with VCS 7.2 and TMS 13.2.2. We use jabber to take interviews. The candidates will be sent the link to download the jabber with the required authentication settings. The Jabber is configured with the Public Max and minimum bandwidth of 768 Kbps.
My question is related to the downspeed of bandwidth. If we configure the bandwidth of 768 Kbps prvosining and internet bandwidth of candidates is less than 768 Kbps will be the Downspeed VCS to accroding appeal to the bandwidth of the network of candidates.
for example if my internet connection from home is just 512 Kbps and the use of the jabber to make a call to ex90 in my office. Bandwidth settings is preconfigured in the jabber as 768 Kbps. When the call is established will be VCS downspeed the call at 512 Kbps.
Krishna.
You cannot configure a minimum bandwidth, which is always the maximum bandwidth jabbervideo will use.
The user can only set this value downward but not upward, but as the client detects a loss and stores a database
with information on used networks recently and its quality.
So, should not be a big problem the faster speeds available and allow the customer to do magic.
I woud recommend to (re) read the Jabber_Video_Administrator_Guide
This gives you more information concerning automatic bandwidth adaptation and capabilies of bandwidth detection.
Tags: Cisco Support
Similar Questions
-
The Cisco TelePresence Exchange System compatibility matrix (CTX) does not cover version of VCS X8.1.1 (to solve the problem of software). Version X7.2 is recommended and supported which is affected by "heartbleed".
X8.1.1 compatibility is tested by Cisco and the updated matrix?
In fact we run CTX v1.3 with VCS X7.2 and solve the problem of software without leaving the support. What is the recommendation of Cisco?
Kind regards
C.Opwis
You could improve your VCS to X7.2.3 which includes a fix for Heartbleed.
-
Directory of video Jabber Cisco Configuration problem
Hello!
We have a facility with
VCS 7.2, TMS 13.2.2. and a lot of video of jabber users. TMSPE uses for commissioning and etc., TMS and VCS are configured to import users from the AD:
VCS in AD domain, AD srvices is configured, default Zone is configured as check credentials, sub-area by default is configured as authenticated. MOVI users are configured and imported into TMS of AD - I can see them in the management of the telephone directory, Movi version 4.5, in configuration model [email protected] / * /(asb.by = local to the sip domain) is configured. With movi users group has access and permission to search for the phonebbok. The problem is that when a movi user trying to search another user - failure of the attempt to find: he gets nothing. However it is the contact searcing is connected with movi and appeared in the devices put into service. For example the EX60 ep is configured with directory - it has a full ist of users (contacts) imported from AD and created locallly.
Hello
Can you check the TMSPE diagnoses in TMS and see if the phone book button are red.
Also check the source directory activity in TMS and see if you see errors.
Make sure that you perform a full synchronization with the TMS of VCS (Configuration tab, click on "Synchronize complete now")
Also on the VCS you can actually check if the entries in the directory exists in the VCS and the users have access to them.
Status--> Application--> TMSPE--> directories
Let me know if you see errors about directories in MSDS.
/ Magnus
-
Jabber for telepresence (MAC OS)
I was asked to rollouot the Jabber telepresence (MAC OS). I took all the Jabber for telepresence (Windows) However, I'm not familiar with the version of MAC OS.
I looked for MAC OS user's guide, however it does not show where to enter the settings for the internal and external parameters.
If someone has installed the version of MAC OS before and are there special models which must be addedd inot models in MSDS
If you are looking to create a preconfigured installation program, see here:
The settings are in the relevant plist, look for com.cisco.JabberVideo.plist located in Library\Preferences.
Parameters can also be added locally by the user; Open JabberVideo and click the key/screwdriver icon or choose JabberVideo then Preferences from the top Ribbon.
Otherwise, there is no model of special supply required for the Mac, the two Win version and Mac use the same provisioning models.
/Jens
Please note the answers and score the questions as "answered" as appropriate.
-
Driver of Cisco Telepresence - room LoopBack
Hello world
Is it possible to create a meeting room on Cisco Telepresence driver that will return the video to the appellant alone in the room? As the [email protected] / * / Cisco's Sip URI? (A kind of selfview room)
Thanks for your help.
It is possible to show only one participant connected to a MCU conference selfview, but not for telepresence Server conferences. It comes without caring if the driver is involved or not. The service provided by Cisco closure is obtained with the C40/60 endpoints where the audio and the video plays in a loop directly to the connected call (output HDMI to HDMI-in, output audio RCA audio-in RCA/RCA).
-
Configuration of the firewall Cisco Telepresence MCU 5320
Hi all.
I searched all the documents of the MCU again, but I found nothing on the ports it uses.
Help me
HI Sandra. The 5320 MCU is the same as 4500 MCU.
Incoming ports
- FTP - TCP:21 + transient (dynamic rather than fixed) used TCP ports for passive mode
- HTTP - TCP:80
- HTTPS - TCP:443
- H.323 - TCP:1720 + ephemeral TCP ports for incoming calls
- SNMP - UDP:161
- Outgoing calls to H.323 involve ephemeral ports TCP connections TCP TCP:1720 and a certain number of ephemeral TCP ports
- Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5060
- Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5061
- Outgoing interruptions SNMP are sent the ephemeral ports UDP Port 162
- Media (including audio and video, FECC messages) are ephemeral ports from ephemeral ports UDP.
- The products acquired Cisco TANDBERG/Codian and gateway series series Cisco TelePresence allocate the ephemeral ports between 49152 to 65535 *. It is possible to change the ports on which these products receive and establish connections. For example, by default the Codian products Cisco acquired listen port 1720 H.323 calls and connections to port 80 web browser, but these can be modified (go to network > Services).
Keep in mind this MCU does not support the streaming or conference me and have either the GK aboard. If these ports are listed.
The link to the Article can be found here:
VR
Patrick
-
Cisco TelePresence SX20 with laptop
I use a Cisco TelePresence as autonomous SX20 endpoint configured with a public IP address (in Pakistan). I want to connect a portable computer (to Canada) to start video conferencing using the portable camera. Please advice me the software to install on the laptop so that I can start with my SX20 videoconferencing based on IP configured on my SX20.
To understand kindly refer to the disposal of partner network.
Please help me its urgent.
Hello
BR Oleksandr
-
Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015
Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!
I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.
How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?
- Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
- AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
- Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.
I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.
Kind regards
Acevirgil
-
Dear all,
I am new to Cisco TelePresence, and I want to learn this technology.
Can anyone share implementation guides or desgin from the point of view of learning.
I'll be very grateful.
Kind regards
Malik.
Hi Malik.
Here are some links... However if you are looking for the community you get simillar multiple threads
http://www.Cisco.com/en/us/docs/voice_ip_comm/uc_system/design/guides/videodg/videodg.PDF
http://www.Cisco.com/en/us/docs/solutions/enterprise/video/TP-book.html
see you soon
Alok
-
Extension of Cisco TelePresence Management Suite Analytics
Hello - I have a few queries on Cisco TelePresence Management Suite Analytics Extension and wanted to get help on the same.
A. Cisco active development on this product and/or have predefined routes for this platform? We have not quite
hear updates during the liberation of UC SEVT 10.0 for this platform?
B. what kind of support is available for this platform in a perspective of customization of the report?
C. are there examples of SQL scripts that could be re-used to produce reports of the below type:
- Video endpoint / use of rooms
- Number of subscriptions too video session
- Capacity Trending & forecasting for the use of a Port of MCU and increases endpoint.
D. What are the technical limitations known from the point of view analytics platform? In other words, it does not imply that
the analytical potential lies in the hands of developer and NOT the platform, taking into account its APIs?
Thank you
SG
See this thread, message of Kjetil Rees (marked as a correct answer) in particular:
https://supportforums.Cisco.com/message/3449977
You aren't going to get an answer about the development plans and roadmaps here in a public forum, you will need to contact your Cisco representative for this kind of information.
If you want something where all the work has been done for you, and that is customized to your specific needs, then you might want to consider looking at vAnalytics, http://vyopta.com/products/vanalytics of Vyopta, http://vyopta.com/
No, I am not associated with Vyopta, however, we use one of their products.
/Jens
Please note the answers and score the questions as "answered" as appropriate.
-
Content Server Cisco telepresence - separate content
We have a Cisco Telepresence Content server v5.3 build 3486.
My client is looking for a recorded video to divide without content. Kindly advice how to do it. Please note that it is a recorded video.
I went through the models that we have to TCL, but there just passing through, joined, stacked and PIP.
If you already have a record that contains content, that content is displayed, there no deactivation part as it is already registered. I noticed you questions about video recording without content in another discussion, I hope this is helpful in this case.
-
Hello
I'm looking to see if there is an impact to change the password of the local user account on an instance of a content server Cisco TelePresence virtual machine?
The software version is v6.2 build 4073.
Thank you in advance,
Robert
I'll assume, you are referring to the administrator account, but it can be applied to any local account which is located on the TCS server itself. It has no impact to change the password, unless you are using doesn't say account to connect to the server of TCS or web interface, it will not affect the application of TCS as most things such as external storage or clustering rely on domain accounts and not the local server.
-
Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?
Hello
Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?
Thank you
AA
Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.
To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.
Kind regards
-Andrew
Sent by Cisco Support technique iPhone App
-
Dear support team,
I want to know how to configure cisco telepresence sx20.
any body can help pls...
Configuration Cisco Telepresence Sx20 is not easy to do. I think below link will help you for configuration.
-
Cisco Telepresence SX20 and Touch 8 Configuration after paired
Hello
I successfully connected and combined the SX20 Cisco's Telepresence and Cisco Telepresence Touch 8. Before using the 8 key, we used the remote control instead. As a result, I have two questions about this.
1. as far as I know, when I use the 8 key, the remote control cannot be used. Is it possible to use both of them?
2. How can I change the background of my SX20 touch 8? Previously, the remote I can easily choose the background for my SX20. But after pairing with Touch 8, background in my SX20 become a blue large clock. I really want to have a different background but cannot find the way how to change.
Any help would be appreciated.
Thank you.
Sincerely,
Bagus Hanindhito
After you connect the 8 Touch, you can still use the remote control, you will need to put on the SX20:
SystemUnit MenuType experimental configuration: full
I think that the standard background when using a touchscreen device is what you see, blue with large clock. However, after the MenuType return in full which will give you the full OSD which is used with the remote and not that of the button, you may be able to change the background then.
Maybe you are looking for
-
Satellite click 2 Pro P30W - docking station has stoped working
Hello Usually, I use my laptop as a tablet pc.Today, after conecting the tablet to the docking station, I saw that the keyboard and touch pad do not work.The strange thing is that the Toshiba Software see my dock as connected.I thought it was a low b
-
I can't connect internet LAN - NetTrans question
I can't connect internet LAN. What is NetTrans? Is this driver or,?
-
Satellite Pro A100 plugged in causes interference on my monitor
A100 plugged it causes interference on my monitor. VGA and inlet supply located close together but this should not be an excuse. Any ideas please? Post edited by: bitnutty
-
Equium L40 - Vista - BSOD using remote desktop
Hello I have been using my laptop to connect to an XP machine using remote desktop. In recent weeks, the laptop began to blue screen and stop. There is no reason to set, the only thing I noticed, is that if I have IE open on the satellite, it seems b
-
Add number of zeros for exhibitor in number of string range
Hi all I want to read a string and convert it to a number that the string is in the form 2.000000E + 00, add a number to it and convert it back to a string in the same format. I can read the string and to convert a number, I'm just not sure since the