Content Server Cisco telepresence - separate content

Similar Questions

• Is any impact of a change of the password of the local user account on an instance of a content server Cisco TelePresence virtual computer?

  Hello

  I'm looking to see if there is an impact to change the password of the local user account on an instance of a content server Cisco TelePresence virtual machine?

  The software version is v6.2 build 4073.

  Thank you in advance,

  Robert

  I'll assume, you are referring to the administrator account, but it can be applied to any local account which is located on the TCS server itself.  It has no impact to change the password, unless you are using doesn't say account to connect to the server of TCS or web interface, it will not affect the application of TCS as most things such as external storage or clustering rely on domain accounts and not the local server.

• Content Server Cisco telepresence - prompter

  Y at - it an option to use the server of content like a teleprompter.

  My customer has dial E164. Share the presentation of his camera and read the content/presentation.

  The content server must omit the presentation and record video. just like a teleprompter...

  Could implement us this without modification in MCU/endpoint, but only in the content server.

  If I understand correctly, you want to save the video only and not the presentation?

  You may disable video Duet on the TCS under the recording Configuration > Configuration call.  Create a new configuration of the call and assign it to the alias that you use, then whenever someone uses this alias special, it will just record their video and recording all content sent will not be captured by the TCS.

• Cisco Telepresence Server/Cisco Telepresence driver/Cisco VCS - C / Cisco TMS license

  A big problem with the fact that I'm stuck is licensing. Really, I have tried many things to find the solution for it, but could not.

  I have actually made all of these servers (mentioned in the title) in my lab in preparation for the CCNP Collaboration certification at home.

  I am not able to complete some laboratories due to license issue (I guess). Y at - it an option to get the demo license for all these servers?

  I would be really greatfull if someone can suggest me the solution and/or the licenses required to complete all the stuff for my CCNP Collab tag.

  Best regards

  Dipak Singh

  TMS and VCS - C when installed without licenses, are automatically set mode of demonstration/test with some availability of license to test with. If needing a VCS-E, you will need to do to your account manager and they should be able to get you the time limited licenses good because I think that 90 days.

  Conductor Essentials is free, which means that you can install and get full functionality without the need of all licenses, but you are limited to 1 conference bridge and no grouping is allowed.

  TelePresence Server require licenses to function, once again, reaching out to your account manager for this.

  At the end of the day, you should reach to your account manager for all of this, as they should be able to help get timed license if you need.

• Cisco TelePresence error Content Server Login

  Cisco TelePresence Content Server v5.3 build 3316

  When I try to log in to Cisco TelePresence Content Server, it is not verfying the administrator username and password. Later, I have to enter link below and enter the administrator username and password and it is letting me.

  http://10.7.1.38/TCS/#page:login & rescue: true

  Kind regards

  Mohammad

  Hi Mohammad,.

  The link you are trying is the TCS rescue mode. The reason for its non audit admin uname & pwd you might have changed the authentication settings on the site settings page. If authentication earlier was local and you have changed domain or LDAP then TCS will try to authenticate by using this mechanism and will not take admin local credentails.

  To avoid this, once connected via rescue link, create a user with admin rights

  Configuration > users and groups > add users and group > add a user with rights to site manager

  Log out and then try looging with the user that you created. It works perfectly.

  This also happens when earlier you use domain authentication and you've changed your LDAP authentication or vice versa. Creation of the user with rights to site manager is so important before you change the authentication mechanism.

  Hope this information helps.

  Please rate if you find it useful.

  Kind regards

  Gerard

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015

  Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!

  I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.

  How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?

  • Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
  • AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
  • Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.

  I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.

  Kind regards

  Acevirgil

• The implications of Cisco Telepresence server operation mode

  I have a CISCO Telepresence server that is currently running in mode managed locally, if change you it remotely and add it to my TMS, will I lose all my permament locally created conference rooms? (be they get deleted?)

  Thank you!

  HI Douglas.  TS blade didn't need to be mode remotely managed so that it can be managed by TMS.  This mode is used for the management as a conductor Telepresense.

  When it was presented, was 3.0 TS.

  Release notes:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TS/release_note/Cisco_Telepresence_Server_Release_Notes_3-0_2-24.PDF

  Page 2 pretty much answer your questions here.

  If your not using a conductor or by using your own program API to use TS in this mode, its better to leave behind in managed mode and add the system to MSD and leave it that way.  This is the normal operating mode if you use the TMS.  Let in managed mode locally, add it to the TMS and you can book etc. against it using TMS meetings.  If automatic discovery is enabled in TMS, permanent meetings should appear in the CCC.

  I hope this helps.

  VR

  Patrick

• Cisco telepresence video Communication Server (VCS) - compatibility CTX X8.1.1?

  The Cisco TelePresence Exchange System compatibility matrix (CTX) does not cover version of VCS X8.1.1 (to solve the problem of software). Version X7.2 is recommended and supported which is affected by "heartbleed".

  X8.1.1 compatibility is tested by Cisco and the updated matrix?

  In fact we run CTX v1.3 with VCS X7.2 and solve the problem of software without leaving the support. What is the recommendation of Cisco?

  Kind regards

  C.Opwis

  You could improve your VCS to X7.2.3 which includes a fix for Heartbleed.

• Driver of Cisco Telepresence - room LoopBack

  Hello world

  Is it possible to create a meeting room on Cisco Telepresence driver that will return the video to the appellant alone in the room? As the [email protected] / * / Cisco's Sip URI? (A kind of selfview room)

  Thanks for your help.

  It is possible to show only one participant connected to a MCU conference selfview, but not for telepresence Server conferences.  It comes without caring if the driver is involved or not.  The service provided by Cisco closure is obtained with the C40/60 endpoints where the audio and the video plays in a loop directly to the connected call (output HDMI to HDMI-in, output audio RCA audio-in RCA/RCA).

• Enable SSH on the virtual server of telepresence

  Hello - did someone knows if it is possible to enable SSH on the server of telepresence for Virtual Maching (version 4.3)?

  I do not have access to the VMware console, but I would urge a capture of packages using the command "nettap.

  THX.

  Josh

  Dosen t TelePresence server have SSH access, the only College packet capture methods are from the console or web interface.

  Telepresence server, MCU, VCR IP and gateway Network Packet Capture

  Collect network of Cisco MCU/TS with the Web Interface packages

• Conversationalist active Server of telepresence and Silhouette film strip

  Here's the scenario:

  Three IX5000 usings call conference bridge.  A bunch of users are also challenging a single Meetingplace audio conference.  Then a user IX5000 will merge the telepresence as well as audio Conference and all is well.

  It work very well using CTM (Cisco Telepresence Multipoint switch).

  We recently tried to replace CTMS with telepresence server.  The problem is the silhouette of the active talker band and film are rampant.

  With the server TP when the active talker calls a Phone 7960 series her generic figure filling an IX 5000 screen so it is useless and annoying.

  Also, we get a lot of generics of the silhouette for all callers call professionals is not useful and annoying.

  Can we disable the active speaker and functions the film for points not telepresence endpoints or something?  Or is there another approach to take?

  Hi Tod,

  Unfortunately there is no current way to disable avatar audio active speaker on version 4.1 of the GST and especially beyond manually enter a control center conference TMS and video for the user who is audio only of inhibition.

  What follows is a good thread on this same issue:

  https://supportforums.Cisco.com/discussion/12631876/disable-Telepresence...

  CSCus88355 is used in a feature request to allow this should be disabled, I would advise this sunrise with your account team directly.

  -Jonathan

• It is possible to intregate MARKS and server of telepresence in a multipoint network link?

  Hi friends,

  I recently did a big upgrade of an environment of telepresence entire Cisco, including a large number of components telerepsence, these VCS, server TP, TMS, CUCM, CTS 1300, CTMS, CUVC, point final series C, jabber, 9900 and 8900 video phones in the series.

  Opportunities for interoperability between Cisco telepresence solutions have been much improved, that's why we have done the upgrade.

  Now, I just doubt, which I wasn't able to solve by searching in the documents and guides. I know that it is possible to establish a link of multipoint network between several CTMSs in order to scale the number of participants at the Conference. It's great! But is it possible to link (waterfall) CTMS (version 1.9) and TP Server (version 2.2)?

  Two of them having supported the ADVANCED Protocol, I think it is supossed to work, right? I tried to achieve this integration, but it did not work. TP recongnizes CTMS as being three SIP screen Telepresence server, I have a participant (CTS Endpoint 1.8) connected to the CTMS and a participant (point endpoint 9971) connected to the server TP, but I see a black screen in both participants, no audio. If endpoints ask each other directly, it works normally, because they are running new firmwares.

  It is possible to intregate MARKS and server of telepresence in a multipoint network connection?

  Thank you!

  Kind regards

  Paulo Souza

  Hello Paulo

  Glad to hear that you are experiencing improved after the upgrade to get the best of interop.

  Unfortunately cascading is not supported with GST again. It can be included in a later version in 2013.

  Thank you

  Rafal

• Configuration of the firewall Cisco Telepresence MCU 5320

  Hi all.

  I searched all the documents of the MCU again, but I found nothing on the ports it uses.

  Help me

  HI Sandra.  The 5320 MCU is the same as 4500 MCU.

  Incoming ports

  • FTP - TCP:21 + transient (dynamic rather than fixed) used TCP ports for passive mode
  • HTTP - TCP:80
  • HTTPS - TCP:443
  • H.323 - TCP:1720 + ephemeral TCP ports for incoming calls
  • SNMP - UDP:161
  • Outgoing calls to H.323 involve ephemeral ports TCP connections TCP TCP:1720 and a certain number of ephemeral TCP ports
  • Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5060
  • Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5061
  • Outgoing interruptions SNMP are sent the ephemeral ports UDP Port 162
  • Media (including audio and video, FECC messages) are ephemeral ports from ephemeral ports UDP.
  • The products acquired Cisco TANDBERG/Codian and gateway series series Cisco TelePresence allocate the ephemeral ports between 49152 to 65535 *. It is possible to change the ports on which these products receive and establish connections. For example, by default the Codian products Cisco acquired listen port 1720 H.323 calls and connections to port 80 web browser, but these can be modified (go to network > Services).

  Keep in mind this MCU does not support the streaming or conference me and have either the GK aboard.  If these ports are listed.

  The link to the Article can be found here:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/articles/conferencing_products_conferenceme_ports_used_kb_3.shtml

  VR

  Patrick

• Cisco TelePresence SX20 with laptop

  I use a Cisco TelePresence as autonomous SX20 endpoint configured with a public IP address (in Pakistan). I want to connect a portable computer (to Canada) to start video conferencing using the portable camera. Please advice me the software to install on the laptop so that I can start with my SX20 videoconferencing based on IP configured on my SX20.

  To understand kindly refer to the disposal of partner network.

  Please help me its urgent.

  Hello

  www.ciscojabbervideo.com

  BR Oleksandr