Cisco VCS X6.1 and MS Lync 2010 over TLS
Hi all!
I have a problem of integration CiscoVCS (X6.1) and Lync 2010.
I couldn't configure control VCS to Lync connection over TLS, but I've done with TCP.
If I try to TLS, there is detail = "bad packet length", event = 'Outbound TLS negotiation Error' records in the control of VCS event log.
The VCS and Lync certificates are of the same CA approved with their FQDNs as object names and the VCS and complete Lync with EDCS are in the DNS system. Of course, VCS and complete Lync, what subjects of certificates, used in VCS approved area and host of destination trust app Lync.
Calls for VCS is the intellectual property of the EFF Lync. We use no HLB and administration. Also, VCS is autonomous, without any load balancers or clustering.
Lync signaling is done, but as I see it, VCS cannot send the data back.
Lync is on Server 2008 R2 x 64
Thanks for your suggestions!
In reflection of the c20 position, what image software do you run on the VCS?
with:
s42700x6_1_0.tar.gz 21-Apr-2011 12:39 266Mor without:
s42701x6_1_0.tar.gz 21-Apr-2011 12:43 266M
encryption?
Tags: Cisco Support
Similar Questions
-
OpenSSL with 'Cisco VCS Certificate Creation and use - deployment guide. "
Hi team,
To prevent users to log on with the VCS Highway, we want to use OpenSSL (version: 1.0.1p 9 julio 2015), but I am facing the following problem:
1 - I can't implement the command "touch index.txt".
2 - I can´t implement the command "openssl genrsa-aes256-out private/cakey.pem 4096"; and when I apply these commands I get "OpenSSL is not recognized.
I did all the steps that says "VCS certificate creation and use Cisco".
What could be the matter?
Thanks for your advice.
Kind regards
Bill
Already explained why touch does not, simply create the .txt through windows command file.
-
Vcs Tandberg and Cisco VCS control
Hello
I have a client with an old would invest video and new servers.
Old video servers
Control system Tandberg video Communication Server - part number = 117500
Application of Tandberg video Communication Server Expressway - part number = 1163402
New video servers:
VCS License Control - Part Number - R-VMVCS-CTRL-K9
VCS Expressway License - Part Number - R-VMVCS-EXPWY-K9
According to Cisco x8.2 Clustering:
-Each peer runs on a hardware platform with equivalent functionality; for example, you cannot cluster one
peer running on one core 2 average VM with peers running on base 8 large virtual machinesMeans that the physical old VCS cannot be grouped with new virtual VCS.
Thank you.
Hi zizou.
You can include a device VCS with a VCS VM as long as their matches of software and their hardware platforms have equivalent capabilities.
Device VCS clustered with VCS VM running on core 2 MediumVM = YES
VCS machine clustered with VCS VM running on 8 cores LargeVM = No.
"you can even cluster that are running on the standard devices with peers running on core 2 Medium VMs, but you can not group a peer running on a standard unit with peers running on base 8 large virtual machines.
(p.4)
-
VCS 7.2.2. and the integration of Lync 2010
Hi all / Andreas,.
I was hoping that you could help us with a problem we have in our lab environment to get one of our areas of Lync 2010 and our video customers talk together.
Basically, we have only one video field ([email protected] / * /-2 areas of Lync and [email protected] / * / and [email protected] / * / )
We use a single gateway to lync VC to our laboratory and a VC control that takes care of all the [email protected] / * / registered customers.
The [email protected] / * / can make calls with the two areas of lync 1 and 2 with success.
However only Lync field 1 can communicate with our [email protected] / * /. Lync doman 2 users can not reach a customer VC that their presence shows unknown.
We have no active findMe and prefer not to do this now. (If no record of FindMe on Lync)
Any suggestions/help would be appreciated... Is it even possible that we are trying to achieve?
Thank you
SC
With the help of several areas and a third domain for shared video endponints for these two areas is not at least common deployment.
For the best support findme is btw a requirement.
If you want to use two different areas that you would waste away should look into if the old relay of ocs / road direct way might
be a workaround or get two VCS (clusters), one for each area of lync you can point only to a lync destination
address signaling. Not sure if you can fix the routing to Domain2 also in both servers lync.
If you do not get a response better / more input here, be sure to ask your Cisco partner / rep.
-
Cisco VCS and integration Lync2013
Hello!
Could you tell me please, when CISCO officially support Lync2013 - free new software for VCS - C and documentation on integration?
The main interest is the possibility of transferring video between CISCO/MCU and Lync endpoints on the H.264 Protocol, who hails from Lync2013.
Right now, I've got VCS - C and RTM Lync2013 X7.2. During the video call without AMGW appeal established as audio only.
When using with Lync2010, it worked on Protocol H.263 and CIF resolution.
Evgeniy salvation,
We are currently investigating the possibilities to achieve interoperability between Lync 2013, VCS and video devices on the side of the VCS standards-based, it is a work in progress and at this stage, it is to early to provide any factual information on when interop will be available.
In contrast to Lync 2010, Lync 2013 does not support H.263 for video and it so that will remove the OCS/Lync integration. I do however think that you should be able to make a two-way video between Lync 2013 and VCS-joined endpoints if you use an AMGW tried that yet?
Thank you
Andreas
-
integration of lync 2013 with cisco vcs - c
Hello
I found a lot of documentation on integrating to Lync 2010 with VCS - C, but can't find much on the integration of Lync 2013. Could someone shine some light on this for me?Thank you!Hi, David,.
It would be preferable that you contacted Cisco re: integration
https://supportforums.Cisco.com/thread/2181356
Or try to repost your question to the TechNet Forum
-
Restricting calls between a subarea and specific extensions on Cisco VCS
Hello, I use Cisco VCS 8.5.3, my goal is to restrict calls between a subarea and specific extensions.
I tried following solutions:- Download of XML strategy
- Use of political appeal web interface in order to limit calls
XML file:
But when I apply the XML file, or try using the web simple rule (for example: 11111 12222 destination source, dismiss the action) I'm still able to place the call to 11111 to 12222.
What can be the cause of the problem and what else can I try to be able to prohibit calls between a particular Subzone and exentions?
Attached, is an example of CPL script that should work. Using this script, CPL, I was able to block calls to a subarea set to a destination alias located in the subzone of default and was always able to call any other end point in the default subfield without problem. Note that you must enter the name of the subarea, as you have configured on the VCS, including spaces if they exist.
The scenario is based on the example of CPL "limiting access to a local gateway" X8.5 VCS Administrator's Guide on pg 413, other documents of CPL reference and examples can be seen starting on pg 410.
-
Cisco VCS and MCU - Conference does not
Dear community members
I have problems in the VCS configuration to work with the MCU to join to several endpoints in a conference. The components that I use:
-Cisco VCS control v8.7.
-Cisco 5300 MCU 5310 v 4.5 (1.72)
-3 x SX20 end points
I recorded every endpoint and MCU on VCS, but I'm not able to do a conference call 3-way, the only option is 1 video and 1 audio (I disabled the Multisite option). It seems that VCS does not yet call the MCU in the game.
Kindly help us with it.
Can you tell us how you set up the Conference and how you have configured MCU and endpoints?
From the sounds of it, you call each end point of one of the SX20s, but you must call simply directly in the Conference on the MCU. If you want to have a conference point to point between two end points and then degenerate into a multipoint conference on the MCU, you must configure Multiway.
-
Windows 7 Aero does not work after the computer and Lync 2010 screen sharing session force shutdown
Hi guys,.
I can't activate Aero, my theme is stuck on Basic after that I got a power issue and forced stop running Lync 2010 screen sharing (this disables Aero but it turns on when the sharing is stopped).
I'm running Windows 7 Ultimate x 64 on a workstation with the following specifications:
CPU: AMD Phenom II X 4 955
RAM: 16GB DDR3 Corsair
GPU: nVidia GTS 450 (1 GB of GDDR5 memory)
My Windows experience index is 5.9 (determined by HDD SATAII, the rest scores are higher than 7).
Troubleshooting I executed before writing these lines:
- Updated my nVidia drivers
- Checked the themes and DWM Session Manager services, both started, both the Auto value
- Ran the store built, the problem cannot be resolved
- Running the Wizard Microsoft Fix It, he pointed out that my graphics card does not support Aero Glass
So the GPU is not the problem, I've been running Aero until this problem has occurred.
Any ideas?
Thank you!
Hello
It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum.
You can follow the link to your question:
The customers TechNet Lync and devices Forum
http://social.technet.Microsoft.com/forums/en-us/ocsclients/threads
-
After updating to release 21.0, I'm more able to join a meeting by using Microsoft Lync 2010 online if Firefox is set as my default browser. I am invited to "Join the meeting using your web browser" or "download and install Lync participating." None of these options work. Join using web browser results in a command prompt to install missing plugins, but then no appropriate plugins can be found. Try to install Lync Attendee fails because Lync 2010 is already installed.
I also tried to install the beta version of Firefox 22.0, but the problem persists.
Hello ScottRey, please try this: enter about: config in the firefox address bar (confirm the message information where it appears) and search for the preference named plugins.load_appdir_plugins. Double-click it and change its value to true (a restart of the browser may be needed later for the change to take effect). some information on the issue are explained in http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
-
Why would MS Lync 2010 will not connect you without company VPN?
I work in the service desk and I was the user who could not connect to MS-Lync 2010 without a company VPN, user asked me why and I was not completely answering his question no matter who wants to answer this question in order to expand my knowledge?
Hello
Your question is beyond the scope of this community.
I suggest that you post your question in the Forums on Technet Lync.
https://social.technet.Microsoft.com/forums/Lync/en-us/home?category=Lync
See you soon.
-
With the help of MicroSoft Lync 2010
I am currently using MicroSoft Lync 2010 and when I send an invitaiton to someone I can share my screen, but when I try to make him the presenter it does not work? all ideas
Hello
These Forums, the community of Microsoft (formerly responses).
does not specifically support Lync.You should also check in the Lync Forums:
Lync - Forums
http://Lync.Microsoft.com/en-us/communities/pages/communities.aspx?title=forumsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Lync 2010 - different tone for internal vs external calls
Is there a way to Lync 2010 to make a distinction between internal vs external calls? Now, if you are already online, you get a beep if a call comes in to the general response group or if it comes from an internal caller. How can I configure the system so that people can make a difference? All suggestions will be useful!
Hello
The question you have posted is related to Lync2010 Forum, and would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/category/OCs/
You can also check this link: http://technet.microsoft.com/en-us/library/gg195677.aspx
-
Lync 2010 won't download - error says that it requires Windows 7
Lync 2010 won't download - error says that it requires Windows 7 BUT I HAVE WINDOWS 7!
Very frustrating. After the use of Lync 2010 for the last year, he made a self-introduction to date and in a first, told time that a file was missing. So I uninstalled and reinstalled and now I am told that "only windows XP3, Windows Vista and Windows 7 are supported. Please update your PC"but I don't have Windows 7.
Yes I know it's old. My new PC is sitting here waiting for me to move, but that cannot be done for another month or two that I need to more memory in it. In the meantime, I need to get my Lync 2010 works again.
Any help is greatly appreciated!
Hello Susie,
Thank you for your response.
I hope you've got the resolution of the question in the forums of Lync.
However, if the problem persists, I suggest you to try the steps in this article and the Coachman.
Reference:
The Lync 2010 installation did not finish using Windows Installer (MSI)
http://Support2.Microsoft.com/kb/2477965Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registryI hope this information helps.
Thank you
-
Copy paste does not work with Lync 2010
There are some feature does not work with
Microsoft Lync 2010
Version 4.0.7577.275
I install Lync above and it works very well for calls, but it does not work for copy - paste text on Instant Messaging.
I can't use keyboard shortcuts as it says the shortcut on the right click of the characteristics.
can someone explain to me, how I can solve this problem I searched on the net but culdn can't find anything relevant to my question.
See you soon...
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Lync Server TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/OCs
Maybe you are looking for
-
Satellite Z30 - A - 1-2 - How to re activate the original key
HelloI have Toshiba Satellite Z30 - A - 1 2 and recently my home / end / pg buttons (etc) stopped working.When I press the FN key and the House, I get 7. The FN key is working o.k. - I can use it to adjust the volume, etc. without any problems. I see
-
Portege 7140CT: will of mooring to the workstation with Win2K
The docking station won't work (disconnection when the front lever is shifted to the left), when I install Win2K? [Edited by: admin on 5 August 05 21:24]
-
I can not change the height of a track?
I'm changing the height of a track, but whenever I try I change the height of all. In Garageband 10.1.0. I've looked everywhere but I can't find answers. Help, please!
-
computer is not new ink printer reg.
I have a D7300 HP. Magenta ink was low so I replaced it. The printer recognize the new ink but when I try to print my laptop only let me print with black as the magenta must be replaced
-
What to remove the genuine ms my system.i notification obtained from the window updates
Mr President. How can I remove the genuine window notification that I can't install it. Window updates I remove everything dowload, but every time I start my system its proves again that the notification. do I have to remove this notification. ? and