Cisco VPN Client 5.0.0 does not connect

Similar Questions

• SSL VPN client anyconnect - login page does not appear

  I have an ASA5510 I am setting up for remote access using SSL VPN with the anyconnect client. I followed the guides of configuration on the Cisco's Web site and elsewhere on the internet without success configuration guides.

  When you go to https://(outsdie interface ip address), I get nothing, the browser never loads a page. Here are the commands I entered:

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.5.3046-k9.pkg 1 image

  SVC disk0:/anyconnect-macosx-powerpc-2.5.3046-k9.pkg 2 image

  Picture disk0:/anyconnect-macosx-i386-2.5.3046-k9.pkg 3 SVC

  enable SVC

  tunnel-group-list activate

  in-house VRx-WebVPN group policy

  Group Policy attributes VRx-WebVPN

  Server DNS 192.168.100.11 value

  VPN-tunnel-Protocol svc

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split

  VRX.NET value by default-field

  WebVPN

  SVC Dungeon-Installer installed

  time to generate a new key of SVC 30

  SVC generate a new method ssl key

  SVC request no svc default

  remote type tunnel-group VRx-WebVPN access

  attributes global-tunnel-group VRx-WebVPN

  address value vpn_pool pool

  authentication-server-group VRxAD

  Group Policy - by default-VRx-WebVPN

  tunnel-group VRx-WebVPN webvpn-attributes

  enable VRx-WebVPN group-alias

  We never seen this before - any ideas or what would be useful in troubleshooting this?

  Thank you in advance!

  Dave

  Hello David,.

  Hmm... I'll do a quick true lab setup for this.

  Edit: My own work without problem, it be something else on the configuration that is not allowing you to get the anyconnect portal.

  I used the same image anyconnect and the same ASA image.

  Julio

• Configuration of Cisco for Cisco VPN Client ASA 5505

  Our firm has finally made the move from Sonicwall Cisco for our SMB customers. Got our first customer with a VPN site-to site solid and you have configured the main router for connections via the Cisco VPN Client VPN Wizard.

  When I install the VPN Client on desktop computers that does not capture all the necessary options (unless you have a SSL VPN). I guess that there is a process that I am missing to export a connection profile that Cisco VPN Client users can import for their connection.

  There step by step guides to create the connection profile file to distribute to customers?

  Hello

  The ASDM wizard is for the configuration on the SAA. This wizard will help you complete the VPN configuration on the end of the ASA.

  You will need to set the same in the client, so that they can negotiate and connect.

  Input connection in the client field, that's what you want to be seen that on the VPN client - it can be any name

  Host will be the external ip address of the ASA.

  Group options:

  name - same tunnel as defined on the ASA group
  Password - pre-shared as on ASA.

  Confirm password - same pre-shared key.

  Once this is over, you will see the customer having an entry same as a login entry. You must click on connect there. He will be a guest user and the password. Please enter the login crendentials. VPN connects.

  You can distribute the .pcf file that is formed at the place mentioned in the post above. Once the other client receive the .pcf, they need to import it by clicking this tab on the VPN client.

  Kind regards

  Anisha

• [SOLVED] Native Iphone4s Cisco VPN client cannot establish the tunnel (victory clients do)

  Hello

  IPhone 4 s last IOS5 V 5.1.1 installed

  I'm not able to make the native IPSEC VPN connection upset my company Cisco 877

  Instead, all my computer laptop and netbook with Cisco VPN Client work installed fine when they connect remotely to society 877

  Turn debugging 877, it seems Iphone successfully passes the 1 connection ike (actually Iphone wonder phase2 user/pass), but it hung to phase2 give me the error 'Negotiation with the VPN server has no' back

  An idea or a known issue on this?

  This is how I configured my VPN 877 part:

  R1 (config) # aaa new-model

  R1 (config) # aaa authentication default local connection

  R1 (config) # aaa authentication login vpn_xauth_ml_1 local

  R1 (config) # aaa authentication login local sslvpn

  R1 (config) # aaa authorization network vpn_group_ml_1 local

  R1 (config) # aaa - the id of the joint session

  Crypto isakmp policy of R1 (config) # 1

  R1(config-ISAKMP) # BA 3des

  # Preshared authentication R1(config-ISAKMP)

  Group R1(config-ISAKMP) # 2

  R1(config-ISAKMP) #.

  R1(config-ISAKMP) #crypto isakmp policy 2

  R1(config-ISAKMP) # BA 3des

  Md5 hash of R1(config-ISAKMP) #.

  # Preshared authentication R1(config-ISAKMP)

  Group R1(config-ISAKMP) # 2

  Output R1(config-ISAKMP) #.

  R1 (config) # CUSTOMER - VPN crypto isakmp client configuration group

  R1(config-ISAKMP-Group) # key xxxxxxxx

  R1(config-ISAKMP-Group) # 192.168.0.1 dns

  R1(config-ISAKMP-Group) # VPN - pool

  ACL R1(config-ISAKMP-Group) # 120

  R1(config-ISAKMP-Group) max-users # 5

  Output R1(config-ISAKMP-Group) #.

  R1 (config) # ip local pool VPN-pool 192.168.0.20 192.168.0.25

  R1 (config) # crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac

  R1 (config) # crypto ipsec VPN-profile-1 profile

  R1(IPSec-Profile) # set the transform-set encrypt method 1

  Tunnel type interface virtual-Template2 R1 (config) #.

  R1(Config-if) # ip unnumbered FastEthernet0/0

  R1(Config-if) # tunnel mode ipsec ipv4

  Ipsec protection tunnel R1(Config-if) # VPN - profile - 1 profile

  Profile of R1 (config) # isakmp crypto vpn-ike-profile-1

  R1(conf-ISA-Prof) # match group identity CUSTOMER VPN

  R1(conf-ISA-Prof) # vpn_xauth_ml_1 list client authentication

  R1(conf-ISA-Prof) # isakmp authorization list vpn_group_ml_1

  R1(conf-ISA-Prof) # client configuration address respond

  R1(conf-ISA-Prof) virtual-model # 2

  Then run AccessList 120 for desired traffic ("access-list 120 now allows ip any any")

  I have configured my VPN Cisco "CUSTOMER-VPN" clients and relative password

  Whenever they connect, they are prompted for the password and username phase2 then they join the VPN with an IP address from local subnet released.

  With the same parameters required and confirmed in section ipsec VPN Iphone it does not work.

  It's 877 isakmp debug output after that Iphone wonder name of user and password (then I suppose that phase 1 completed):

  * 14:29:30.731 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH

  * 14:29:30.735 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-1427983983

  * 14:29:30.735 May 19: ISAKMP: Config payload RESPONSE

  * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_NAME_V2 attribute

  * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_PASSWORD_V2 attribute

  * 14:29:30.735 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason "made with Exchange of request/response xauth.

  * 14:29:30.735 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REPLY

  * 14:29:30.735 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_REQ_SENT = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT

  * 14:29:30.743 May 19: ISAKMP: node set 1322685842 to CONF_XAUTH

  * 19 May 14:29:30.747: ISAKMP: (2081): launch peer 151.38.197.143 config. ID = 1322685842

  * 19 May 14:29:30.747: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_XAUTH

  * 14:29:30.747 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:30.747 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN

  * 14:29:30.747 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_AAA_CONT_LOGIN_AWAIT = IKE_XAUTH_SET_SENT

  * 14:29:31.299 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH

  * 14:29:31.299 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID = 1322685842

  * 14:29:31.299 May 19: ISAKMP: Config payload ACK

  * 19 May 14:29:31.303: ISAKMP: (2081): XAUTH ACK processed

  * 14:29:31.303 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE basis "Mode of Transaction.

  * 14:29:31.303 May 19: ISAKMP: (2081): talking to a customer of the unit

  * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_ACK

  * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_SET_SENT = IKE_P1_COMPLETE

  * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 19 May 14:29:31.303: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  * 14:29:31.315 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.315 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 14:29:31.623 may 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE

  * 14:29:31.623 may 19: ISAKMP: node set-851463821 to QM_IDLE

  * 14:29:31.623 may 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-851463821

  * 14:29:31.623 may 19: ISAKMP: Config payload REQUEST

  * 14:29:31.623 may 19: ISAKMP: (2081): verification of claim:

  * 14:29:31.623 may 19: ISAKMP: IP4_ADDRESS

  * 14:29:31.623 may 19: ISAKMP: IP4_NETMASK

  * 14:29:31.623 may 19: ISAKMP: IP4_DNS

  * 14:29:31.623 may 19: ISAKMP: IP4_NBNS

  * 14:29:31.623 may 19: ISAKMP: ADDRESS_EXPIRY

  * 14:29:31.623 may 19: ISAKMP: APPLICATION_VERSION

  * 14:29:31.623 may 19: ISAKMP: MODECFG_BANNER

  * 14:29:31.623 may 19: ISAKMP: domaine_par_defaut

  * 14:29:31.623 may 19: ISAKMP: SPLIT_DNS

  * 14:29:31.623 may 19: ISAKMP: SPLIT_INCLUDE

  * 14:29:31.623 may 19: ISAKMP: INCLUDE_LOCAL_LAN

  * 14:29:31.623 may 19: ISAKMP: PFS

  * 14:29:31.623 may 19: ISAKMP: MODECFG_SAVEPWD

  * 14:29:31.623 may 19: ISAKMP: FW_RECORD

  * 14:29:31.623 may 19: ISAKMP: serveur_sauvegarde

  * 14:29:31.623 may 19: ISAKMP: MODECFG_BROWSER_PROXY

  * 14:29:31.627 May 19: ISAKMP/author: author asks for CUSTOMER-VPNsuccessfully group AAA

  * 14:29:31.627 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST

  * 14:29:31.627 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_CONFIG_AUTHOR_AAA_AWAIT

  * 14:29:31.627 May 19: ISAKMP: (2081): attributes sent in the message:

  * 19 May 14:29:31.627: address: 0.2.0.0

  * 19 May 14:29:31.627: ISAKMP: (2081):address of 192.168.0.21 assignment

  * 14:29:31.627 May 19: ISAKMP: sending private address: 192.168.0.21

  * 14:29:31.627 May 19: ISAKMP: send the subnet mask: 255.255.255.0

  * 14:29:31.631 May 19: ISAKMP: sending IP4_DNS server address: 192.168.0.1

  * 14:29:31.631 May 19: ISAKMP: sending ADDRESS_EXPIRY seconds left to use the address: 3576

  * 14:29:31.631 May 19: ISAKMP: string APPLICATION_VERSION sending: Cisco IOS software, software C870 (C870-ADVIPSERVICESK9-M), Version 12.4 (15) T7, VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2008 by Cisco Systems, Inc.

  Updated Friday 14 August 08 07:43 by prod_rel_team

  * 14:29:31.631 May 19: ISAKMP: split shipment include the name Protocol 120 network 0.0.0.0 mask 0.0.0.0 0 src port 0, port 0 DST

  * 14:29:31.631 May 19: ISAKMP: sending save the password answer value 0

  * 19 May 14:29:31.631: ISAKMP: (2081): respond to peer 151.38.197.143 config. ID =-851463821

  * 19 May 14:29:31.631: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_ADDR

  * 14:29:31.631 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:31.631 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason "error no.".

  * 14:29:31.631 May 19: ISAKMP: (2081): talking to a customer of the unit

  * 14:29:31.631 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR

  * 14:29:31.631 May 19: ISAKMP: (2081): former State = new State IKE_CONFIG_AUTHOR_AAA_AWAIT = IKE_P1_COMPLETE

  * 14:29:31.635 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.635 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  Here the Iphone remains unused for a few seconds...

  * 14:29:48.391 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE

  * 14:29:48.391 May 19: ISAKMP: node set 1834509506 to QM_IDLE

  * 19 May 14:29:48.391: ISAKMP: (2081): HASH payload processing. Message ID = 1834509506

  * 19 May 14:29:48.391: ISAKMP: (2081): treatment of payload to DELETE. Message ID = 1834509506

  * 14:29:48.391 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.

  * 14:29:48.395 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.

  * 14:29:48.395 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)

  * 14:29:48.395 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'informational (en) State 1.

  * 19 May 14:29:48.395: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): rec would notify of ISAKMP

  * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): remove all SAs shared with peer 151.38.197.143

  * 14:29:48.395 May 19: ISAKMP: node set-1711408233 to QM_IDLE

  * 19 May 14:29:48.395: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) QM_IDLE

  * 14:29:48.395 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:48.399 May 19: ISAKMP: (2081): purge the node-1711408233

  * 14:29:48.399 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL

  * 14:29:48.399 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA

  * 14:29:48.399 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)

  * 14:29:48.399 May 19: ISAKMP: (0): cannot decrement IKE Call Admission Control incoming_active stat because he's already 0.

  * 14:29:48.399 May 19: ISAKMP (0:2081): return address 192.168.0.21 to pool

  * 14:29:48.399 May 19: ISAKMP: Unlocking counterpart struct 0 x 84084990 for isadb_mark_sa_deleted(), count 0

  * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool

  * 14:29:48.399 May 19: ISAKMP: delete peer node by peer_reap for 151.38.197.143: 84084990

  * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool

  * 14:29:48.403 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH

  * 14:29:48.403 May 19: ISAKMP: (2081): former State = new State IKE_DEST_SA = IKE_DEST_SA

  * 19 May 14:29:48.403: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  It seems 877 comes even to assign a local ip address of LAN for Iphone (192.168.0.21) but then something goes wrong...

  Any idea or suggestion on this?

  Thank you very much

  Hi Federico,.

  Please let us know.

  Please mark this message as answered while others will be able to learn the lessons.

  Thank you.

  Portu.

• Cisco VPN Client is blocking incoming connections

  Hello

  I somethimes (not always) a problem with the Cisco VPN Client.

  As soon as the CISCO VPN Client is installed (it must not be running) it blocks inbound connections from the local network.

  The problem is that I use Ultra VNC SC to support some of my clients. Another client is supported by Cisco VPN. With UltraVNC SC customer clients try to connect to my PC.

  But if I installed the cisco VPN Client, no incoming connections are possible.

  How can I change this behavior?

  This behavior is not always the same. Last incoming connections of two months were possible, but from one day to another is not possible more.

  I recently installed the Client, but it takes no effect :-(

  I have NOT activated the firewall Cisco on the VPN Client and the behavior is NOT only if the Client is activated. This is the behavior even if it is NOT active and just installed.

  Hi Chris,

  Zone alarm is installed on the PC that is defective?

  Try to restart the Cisco VPN service and launch the vpn client.

  I remember having a similar problem with the Cisco VPN Client. Some conflict between the VPN client and Zone-Alarm, installed on the same PC.

  The problem was with VSDATANT variables in the registry key.

  Please see the following mail took from another forum:

  http://www.OutpostFirewall.com/Forum/showthread.php?t=9917

• How can I correct a problem accessing my firewall settings because the Group Policy client does not connect to windows?

  I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you

  Hi Sheldon,

  Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.
  You might try to tell scientists on TechNet on your question to see if they have a better answer for you:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• SSLVPN via Cisco VPN Client (simultaneous use)

  Hi, I'm working on a new show: 1) connect to the first network with Cisco VPN client. (2) to leave this connection, road to another Cisco SSLVPN device and perform a SSL - VPN connection. Has anyone tried this before? Are there problems, workarounds? Thanks in advance!

  I do it all the time without any problems.

  HTH >

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• Cisco vpn client minimized in the taskbar and the rest in status: disconnect

  I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco?
  Unfortunately, cisco does not world class technical service... they called but no use.

  In my view, there is now a published version of the x 64 client, you need to download.
  If you suspect an update of Windows, why not try a system restore for a day, it was
  working correctly?
   
  On Wednesday, April 28, 2010 17:27:46 + 0000, akshay2112 wrote:
   
  > I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco? Unfortunately, cisco does not world class technical service... they called but no use.
   

  Barb Bowman www.digitalmediaphile.com

• Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

  Hello

  I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

  I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

  Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

  Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
  Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

  The router configuration

  screen_shot_10-20 - 15_at_09.00_pm.png

  

  IKE policy

  screen_shot_10-20 - 15_at_09.00_pm_001.png

  

  screen_shot_10-20 - 15_at_09.01_pm.png

  

  VPN strategy

  screen_shot_10-20 - 15_at_09.02_pm.png

  

  screen_shot_10-20 - 15_at_09.02_pm_001.png

  

  Client configuration

  Hôte : < router="" ip=""> >

  Authentication group name: remote.com

  Password authentication of the Group: mysecretpassword

  Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

  Username: myusername

  Password: mypassword

  Please contact Cisco.

  Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

  You can use the PPTP on the RV180 server to connect a PPTP Client.

  In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

• Help, please! Microsoft Vs Cisco VPN Client VPN

  Could someone please indicate if the Cisco VPN Client is safer than the VPN integrated Microsoft on windows XP? If the Cisco client is more secure than why? Microsoft it does not use IPSEC and PPTP right?

  Please advise - very urgent!

  I don't know a customer Cisco Cisco VPN concentrator is safer, but I'm not sure exactly why.

  Carlton,

  Take a deeper look at the same time, all your questions will be answered once you look at these links.

  IPSec is a Cisco VPN standard, open customer or any customer VPN IPSec based should meet these standards. You'll learn more by reading these few bellow of links at the end of the reading you will be to have a better

  perspective on the customer you would gear more to use as a professional network.

  Personally, I've been away little by little PPTP and substituting Cisco VPN clients. Don't get me wrong, PPTP is still widely used there, but it is more vulnerable.

  With Ipsec VPN, you have a wider choice of authentication algorithms, to base

  granularity of ciphers as a way to implement a secure VPN extreamely for RA architecture

  Introduction to IPsec

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a0080094203.shtml

  Introduction to PPTP/L2TP

  http://www.Clavister.com/manuals/ver8.6x/manual/VPN/pptp_basics.htm

  Analysis of vulnerabilities and implementation MS PPTP

  http://www.Schneier.com/paper-PPTP.html

  http://www.Schneier.com/paper-PPTP.PDF

  Alternative workaround to use client MS using L2TP over Ipsec

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807213a7.shtml

  In addition, you can do a google search on "hacking PPTP" or "Ipsec" to preview more vulnerabilities.

  Rgds

  Jorge

• Unable to connect via the Cisco VPN Client

  Hello

  I have configured remote access VPN to ASA and tries to connect via the Cisco VPN Client 5.0

  I am not able to connect and watch the journal on the SAA

  ASA-3-713902: Group = xxxxx, IP = x.x.x.x, withdrawal homologous peer table is placed, no match!

  ASA-4-713903: Group = xxxxx, IP x.x.x.x, error: impossible to rmeove PeerTblEntry

  ASA does not support the K9 i.e. VPN - DES is enabled and VPN-3DES-AES is disabled.

  What could be the reason.

  Concerning

  Hi, I had this same problem, here is the solution:

  When you perform a debug crypto isakmp 255, so you see that the cisco vpn client does not support SHA +, you must use MD5 + AN or sha with 3DES/AES.

  Be careful, this debugging is very talkative, but that's the only way I found to get ITS proposal on debugging.

  Well, change your strategy using MD5 isakmp / OF would do the trick.

• PIX: Cisco VPN Client connects but no routing

  Hello

  We have a Cisco PIX 515 with software 7.1 (2). He accepts Cisco VPN Client connections with no problems, but no routing does to internal networks directly connected to the PIX. For example, my PC is affected by the IP 172.16.2.57 and then ping does not respond to internal Windows server 172.16.0.12 or trying to RDP. The most irritating thing is that these attempts are recorded in the system log, but always ended with "SYN timeout", as follows:

  2009-01-06 23:23:01 Local4.Info 217.15.42.214% 302013-6-PIX: built 3315917 for incoming TCP connections (172.16.2.57/1283) outside:172.16.2.57/1283 inside: ALAI2 / 3389 (ALAI2/3389)

  2009-01-06 23:23:31 Local4.Info 217.15.42.214% 302014-6-PIX: TCP connection disassembly 3315917 for outside:172.16.2.57/1283 inside: ALAI2 / 3389 duration 0:00:30 bytes 0 SYN Timeout

  2009-01-06 23:23:31 Local4.Debug 217.15.42.214% 7-PIX-609002: duration of disassembly-outside local host: 172.16.2.57 0:00:30

  We tried to activate and deactivate "nat-control", "permit same-security-traffic inter-interface" and "permit same-security-traffic intra-interface", but the results are the same: the VPN connection is successfully established, but remote clients cannot reach the internal servers.

  I enclose the training concerned in order to understand the problem:

  interface Ethernet0

  Speed 100

  full duplex

  nameif outside

  security-level 0

  IP address xx.yy.zz.tt 255.255.255.240

  !

  interface Ethernet1

  nameif inside

  security-level 100

  172.16.0.1 IP address 255.255.255.0

  !

  access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.2.56 255.255.255.248

  !

  access extensive list ip 172.16.0.0 outside_cryptomap_dyn_20 allow 255.255.255.0 172.16.2.56 255.255.255.248

  !

  VPN_client_group_splitTunnelAcl list standard access allowed 172.16.0.0 255.255.255.0

  !

  IP local pool pool_vpn_clientes 172.16.2.57 - 172.16.2.62 mask 255.255.255.248

  !

  NAT-control

  Global xx.yy.zz.tt 12 (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 12 172.16.0.12 255.255.255.255

  !

  internal VPN_clientes group strategy

  attributes of Group Policy VPN_clientes

  xxyyzz.NET value by default-field

  internal VPN_client_group group strategy

  attributes of Group Policy VPN_client_group

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_client_group_splitTunnelAcl

  xxyyzz.local value by default-field

  !

  I join all the details of the cryptographic algorithms because the VPN is successfully completed, as I said at the beginning. In addition, routing tables are irrelevant in my opinion, because the inaccessible hosts are directly connected to the internal LAN of the PIX 515.

  Thank you very much.

  can you confirm asa have NAT traversal allow otherwise, activate it in asa and vpn clients try again.

  PIX / ASA 7.1 and earlier versions

  PIX (config) #isakmp nat-traversal 20

  PIX / ASA 7.2 (1) and later versions

  PIX (config) #crypto isakmp nat-traversal 20

• RV120 VPN with full Cisco VPN Client?

  Is it possible to configure the RV120 for a VPN IPsec for use with the complete Cisco VPN client?

  I tried, but it does not appear to support "Goup of authentication.

  I see in the confi router I can put a PSK, but the complete VPN client seems only accecpt "Goup authentication."

  I managed on the basis for the work "Fast VPN", how it works is beyond me, because he does not appear to create an adapter with an IP address or anything on the local line, and I didn't even create a VPN policy...

  Or put another way, what alternative (Free) VPN clients are there to work with the RV120?

  Try the following link for instructions for Cisco VPN and the SA500:

  http://www.Cisco.com/en/us/docs/security/multi_function_security/multi_function_security_appliance/sa_500/TechNote/note/SA500_vpnclient_appnote.PDF

  I hope this helps.

  Thank you

  Rick Roe

  Cisco Small Business Support Center

• How to use Windows 7 64-bit cisco vpn client?

  Hello

  I want to use the cisco vpn client to connect to my Institute.

  I use Windows 7 64-bit edition Home premium.

  I tried several options, but nothing has worked.

  Please suggest me the correct procedure to run on my Windows 7 64 bit Home Premium Cisco vpn client.

  Thanks in advance,

  Federico

  VPNclient is not yet supported on 64-bit windows.

  However, there is a beta version of the next 5.0.7 version that does.

  Have you tried this version? If so, what are the exact symptoms?

  Edit: you can download the 5.0.7 beta here