Cisco Wireless - E2500 N Dual Band router and hide the SSID

Similar Questions

• Crash computer after installing Netgear N600 Wireless Dual band Router WNDR3400. My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.

  My computer crashes after I installed the Netgear N600 Wireless Dual band Router WNDR3400.   I uninstalled and then reinstalled, but my home computer still crashed.  My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.  Any suggestion?

  Hi JudyWinn,

  If you need assistance for updating BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer to update the BIOS (Basic Input Output System) & check if the problem persists.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.
  Please post back and we do know.

• Black bands above and below the flv

  With the help of Corel, I'm conversion wmv to flv for import 6 Captivate. The videos play fine, but I have black bands above and below the video. I tried to change the image format converting videos but I can't seem to get rid of the black bars.

  Hello

  They play with the black bands when played outside Captivate? My guess is that they will do so.

  Chances are that you will need to find a different way to convert. Maybe even play on your computer and use the Captivate demo to capture them as they play.

  See you soon... Rick

• hp7520 disable wireless or hide the SSID

  Hello.

  I have a HP Photosmart 7520.

  It works fine except my client does not want the ssid broadcast in the doctor's office.

  It is already password protected, but he dislikes the ssid 'disorder' in the air.

  I would like to disable Wi - Fi to the printer or at least hide the ssid broadcast.

  Is this possible?

  Thank you.

  Go to the printer and turn off wireless Direct.  Quite.  This assuming the printer is connected to the router.

• Activate the user audit logs and hide the other audit logs account system on computers in a domain by using Group Policy

  Hello

  Please could someone advise me on how to activate the user audit logs and hide the other audit logs account system on computers in a domain by using Group Policy. Your help would be much appreciated.

  Kind regards

  RocknRollTim

  Hello

  Please contact Microsoft Community.

  We have a specific forum for the computers in the domain and they are experts in this field of investigation and would be in a better position to address the concerns. So refer to the link below and post your query on the TechNet Forums.

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this helps. If you have any questions on Windows, please answer. We will be happy to help you.

• Select and hide the query

  In Photoshop CC when I use select and hide the 'onion skin' filter does only rarely. Any suggestions as to why this could be?

  Works perfectly! I'm wondering now if I had the - ticked instead of +. Seems as if could be the answer and if it does not work in the future I'll check everything here first. Thanks for your time and your help.

• Paint with white in selection and hide the workspace

  Hello

  I'm in selection and hide the workspace > discovers black & white. When you use the Paintbrush tool, how to switch between painting with white and black?

  With the Brush tool selected paint just in the black and white view and this is equivalent to paint with white. Now the alt key or option is equivalent to paint with black.

  

• Show and hide the scroll bar

  Hello!
  
  How could I show and hide the scroll bar attached to a dynamic text field depending on the size of the text?
  I tried different solutions based on bottomScroll and maxcroll, but nothing works...
  
  Thank you very much in advance for your help.
  
  Best regards
  Gerry

  If you use a text field, you can do a simple test:

  If (textInstance.textHeight > textInstance._height) {}
  show the ScrollBar
  }

  --
  Dave-
  Developer leader
  http://www.blurredistinction.com
  Adobe Community Expert
  http://www.Adobe.com/communities/experts/

• Installed a new wireless router and now the wireless printer does not work

  We installed a new wireless router and now our Dell V305 will communicate or print with our laptops.  Any help apprecaited!

  You re-configured the printer to work with the new router wireless? Boulder computer Maven
  Most Microsoft Valuable Professional

• Dual WAN router and protocol binding

  Hello! I'm trying to find a dual WAN router with support VPN, which allow me to redirect part of the traffic to a specific port WAN and balancing of this specific traffic in the case of this WAN failure (the latter is preferred but is not entirely necessary) load.

  RV042/G could help me with this? In this case, allow redirection Protocol only? What port/ip forwarding? Or some sort of filtering of packets to redirect to specific WAN ports?

  Maybe I need another router in the conduct of business?

  Thanks in advance!

  Hi Jose, RV0XX model (g) supports a protocol source LAN link to extended network destination set. It can be a host of high-end LAN or a single host LAN. It may be the customer service or all services. In the case of a failure of network SCOPE, all links in the Protocol are "ignored" and switch to the active WAN until normal operation is restored.

  -Tom
  Please mark replied messages useful

• Number named show bands up and down the lists

  I had this problem since my last iPod, who lived both a Vista and a Windows 7 laptop. New iPod that I use on my new laptop running Windows 10 with a library of re-downloaded has been used. In Itunes, the bands that start with numeric characters like 10 years exist only once, at the bottom of the lists of artists. There is only one version of each track, no duplicates. My iPod still have them listed twice in artists, once at the top of the list and one downstairs. Both versions play correctly and have the same tracks, but are treated as separate artists with separate tracks. They follow individually the parts and Randomize titles may take X followed by Y Album from two sources and play the song "same" twice now.

  First time around I blamed it on Vista and then an iPod that sync with Vista. Then I blame on the sort options, but I had other problems Itunes that I solved it by deleting and retyping the artist info and check the options and type names. Copies of these strips at the top simply should not exist, but I cannot get rid of them, or to determine what causes cela first place. Anyone else has this problem, or have any ideas?

  As a test, change the name of one of these "bands" (in iTunes), so that it starts with a letter.  For example, add "AAA" at the beginning of the name of the artist , so that it appears at or near the top of the list when sorted by artist name.  Sync the iPod.  On the iPod, is this artist, who has previously been entered twice on the list, now only listed once or twice?

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Install an application and hide the sound icon

  Hello!

  I need your help for this:

  I have a group of applications and other application functions as a kind of pitcher.

  When I install one of these applications, I need to hide its icon in the list, and this request can only be opened by the Launcher.

  I hope that I explained to you!

  Can someone help me?

  For the application for which you want to hide the icon. Open the blackberry application descriptor and check the box 'not displayed icon on the home screen blackberry.

• Redirect to another page and hide the buttons

  Hello

  It is possibel to hide the buttons if I redirect on one page?

  Example:

  To Page 2, there is the 'Page 3' button. If someone clicks on the button will open the page 3.

  In Page 3, there are three buttons 'A', 'B' and 'C '.

  If I start on page 2 and change the site to click on the button 'Page 3' keys 'A' and 'B' will be hiding on page 3.

  If I start to on page 2 and the change of the site using the menu navigation on page three, all buttons will show up on this site.

  Workspace: TEST_OA5
  Username: [email protected]

  password: Hund456 (<-new password)

  Can someone help me?

  THX

  René

  RWErene81 wrote:

  It is possibel to hide the buttons if I redirect on one page?

  Example:

  To Page 2, there is the 'Page 3' button. If someone clicks on the button will open the page 3.

  In Page 3, there are three buttons 'A', 'B' and 'C '.

  If I start on page 2 and change the site to click on the button 'Page 3' keys 'A' and 'B' will be hiding on page 3.

  If I start on page 2 and change the site using the menu navigation on page three, all buttons will be displayed on this site.

  Add a value ask as PAGE_2_BUTTON for the button on page 2, and then make the buttons A and B on page 3, conditionally to aid a ask! = Expression 1 condition, with term 1 on PAGE_2_BUTTON.

• How to remove and hide the group header

  Hello

  I want to combine metadata fields and you want to give the name to the group. But I want to remove the skin on the page.

  Please provide inputs on how to achieve this.

  Thanks in advance

  You can set disableFieldGroupHeaders = 1 to completely hide the group header.

  To just remove the link to hide, you can set the following in a side effect of rule:

  <>

   

  '$>

  <$exec setresourceinclude("std_field_group_header_show_hide",="" std_field_group_header_show_hide)$="">

  Jonathan

  https://jonathanhult.com