CISCO2901 WITH SECURITY LICENSE PAK?

Similar Questions

• Do I need a security license to set up VPN on the router?

  Hi all.

  I am trying to setup on 2 different routers VPN connections and I'm not sure what I have needed a permit from security to configure the VPN router?

  The first is 1941-K9 site-to-site.

  Second, one is 887G - K9, EasyVPN connection.

  Two of them are not working. What should I check on both routers to see if they are valid for the vpn connection, perhaps some controls as well.

  Thanks in advance.

  Kind regards

  Yes, for the VPN, you need a security license.

  The 1941 should show the following line:

  RTR-01 #sh worm | b technology

  Technology for the Module package license information: "c1900".

  ----------------------------------------------------------------

  Technology-technology-package technology

  Course Type next reboot

  -----------------------------------------------------------------

  IPBase ipbasek9 ipbasek9 Permanent

  Security securityk9 Permanent securityk9

  given none none none

  The 887 comes by default with all features "Advanced Security". That's all you need for this device.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• No sticker with the license number Windows XP for Toshiba NB100

  I lost the sticker with the license number Windows XP for Toshiba NB100. I have an invoice.
  How can I recover the license number?

  Licensed refused to support this topic.

  Hello

  You can't get the license number.
  First the sticker on the bottom of the unit has been a serial OEM key. This key cannot be used and would not work under Win XP installed system costs.

  The point is that Toshiba image which was preinstalled on this laptop has already been activated, which means that this key has been useless.

  I assume that you have not created a disk recovery Toshiba (or flash USB stick) in the past? Right?
  These records would be reinstall the image of Toshiba containing the active Win XP system.

  Well, usually it of possible to order this disc [here | http://backupmedia.toshiba.eu/landing.aspx] but I think that would be more because of the age of the laptop.

  Solution: you have to buy Win XP with valid serial key.

• Recovery CD comes with Vista license key?

  Hello world

  New to the forum so hope you will have patience with me.
  I am looking to buy a satellite pro P200-1KD once.
  I want to dual boot it with XP.

  I have the CD to install XP and VIsta, but would need a Vista the license to install on the new laptop key. (I already have one for XP)
  I know that the phone comes with a Vista recovery CD, but my question is, does it come with a license key?

  I don't know if I can use the dual-boot recovery CD as I suspect that it will use all of the drive for Vista.

  Any help would be appreciated.

  On the Toshiba Recovery CD, you can find the image of Toshiba. Toshiba image contains the OS (Vista in your case), Toshiba drivers, tools and additional software.
  The recovery CD is not the same as a Microsoft OS CD to the original address and the Vista on the Toshiba Recovery CD is already activated.

  By the way; The OEM key (which activates the Vista on Toshima image) cannot be used with other, different Vista OS. It will not work.

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• My laptop 1983 support Chrome with security patches?

  I received an email from Google saying that the platform used on my laptop will not be supported with security patches in the future. What is a problem for me? I have a 1983 (white!) with Mac OS X, Intel Core 2 Duo 2.26 GHz processor.

  You may hear 2003?  Or 2013?  There is no Mac 1983 with Intel chips. The answer to your question is 'no, and Google told you,' but I'm curious to know what you really there.

• my windows server keeps flashing upward with errors with security

  my windows server keeps flashing upward with errors with security

  I suggest that you reinstall the operating system as there is a Setup error.

• MSN Outlook, hotmail "IE has blocked this site to display content with security certificate errors. Click here for options... »

  MSN Outlook, hotmail "IE has blocked this site to display content with security certificate errors. Click here for options... »

  How can I get rid of this irritating pop-up message whenever outlook is open?

  Without knowing what are certificate errors, it is a shot-in-the-dark.

  80 90% of certificate in Windows XP errors can be attributed to one of the following two issues:

  1. Time Date, time, time zone, or light of day on your computer is/is not set correctly.  The time on your machine should be within 5 minutes of real time for certificates authenticate properly.  Right-click on your taskbar clock, and select time settings to check the correct time.  Synchronize time via Internet can solve this problem.
  2. Windows XP does a poor job of keeping its root certificates (certificates by which all other certificates are considered) up-to-date.  The newer versions of Windows did a much better job.  It certainly wouldn't hurt to update your root certificates and in many cases, this is all you need.  For update, visit the following article:
     "Members of the certificate program root Windows.
        <>http://support.Microsoft.com/kb/931125 >
     Then go down to the subsection titled "root Update Package (for Windows XP only).  Then click on the option "update for root certificates for Windows XP... "the link.  This will take you to the last downloadable update.  Download the package on your computer and double-click it to update your certificates

  One of the above should solve your problem.

  HTH,

  JW

• I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

  I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

  original title: can't get online

  Hello BurnBurn,

  I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  http://support.Microsoft.com/kb/283658

• problem with secure access

  Recently, I buy a scandisk 4 GB USB key.  It came with secure access software.  I failed and eventually remove the software.  Then I downloaded the software to access secure on my USB key.  I got the arch in place.  Then I closed it down.  Now, whenever I try to run access secure - it takes several minutes before I get the logon screen.  What's wrong?  What do I ned to do?  I am running windows 7 64 bit.

  OK, good analysis fb65.

  I have no experience with SecureAccess download but the blade I bought recently has SecureAccess on this and I have to suspect that they are similar if not identical.  Mine also shows a version of 1.1.19269.0.

  When I started the SecureAccess departure he asked if I wanted to sign up 2 GB of online storage, which I refused.  I suspect that you have accepted the offer, and that's why you try to connect to the ' net when you start SecureAccess.  I don't know how to disable this option, but I know not how to bypass links chiken.

  Go to your Windows\System32\drivers\etc.  You will find a file named hosts simply.  No extension.   Open the file with Notepad and down add this line:

  127.0.0.1 yuuwaa.com support.dmailer.com # SecureAccess

  Instead, you can try

  127.0.0.1 yuuwaa.com # SecureAccess

  One or the other should reduce to nil the impact that tries to connect online.

  HTH

• After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen

  After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activate windows or how can I connect windows. Once I login I can activate as I have OEM license... Pls advice

  Activation of Microsoft Hotline - (888) 571-2048 MS - MVP - Elephant Boy computers - don't panic!

• Have error code 0 x 80070020 then that he was trying to run backup... tried with security off the coast and still the same error message... solution?

  Have error code 0 x 80070020 then that he was trying to run backup... tried with security off the coast and still the same error message... solution?

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• I recently installed Microsoft 2010. When I go in there, it will not work & continues to send me a message saying that I might have to uninstall & reinstall because of problems encounterd with the license. Why?

  I installed Microsoft Office Home and Student 2010 on my computer Toshiba with Microsoft Windows and the first time I did it it went well through and Microsoft Click & Run and 2010 have been in my programs, but when I went to use my Windows program it came with a messeage of error that says:

  "Auto Correct File\MSO 1033.Add, could not be saved. The file may be read-only or may not be allowed to edit the file.    Then there is a box to check (OK) so I checked the box (OK) to see what happens & it looks like you're actually in Microsoft Office 2010, but once you go there comes another error message saying this:

  "Microsoft Office has encountered problems with the license and may have to close. If the problem persists, uninstall & reinstall your product.  Then, there is another box to check (OK) so I clicked on the box and then it stops and goes completely and so if you repeat this process did the same thing again and again.

  So I uinstalled just as he said and I've now done four times and still I get the same thing again and again. I also have can not uninstall Microsoft Click & Run when I try to uninstall it from my programs, it says contact Mircrosoft that I am unable to uninstall the package of Microsofts.  I'm the administrator of this computer and thought, I could uninstall and reinstall anything?

  Can someone figure this or help me?

  For Microsoft Office 2010 problems, please repost on his own forum:
  http://answers.Microsoft.com/en-us/Office/Forum/office_2010?page=1&tab=no

  This tutorial allows you to uninstall the version 2010.
  http://support.Microsoft.com/kb/290301
  There are 3 Fix It button, 2003, 2007 and 2010.
  Make sure you choose the right version button.

• Reinstallation of Windows 7 with OEM license with an OEM license and the manufacturer's warranty expired

  My hard drive starts to die, if I want to backup all my data and be ready in case it fails. One of the things on my list of verification is to ensure that I can reinstall Windows 7 if need be.

  I don't have in my possession a Windows reinstallation disk, so I want to create a USB bootable for windows 7. The link to the .isos DIgital River that I use to create my bootable USB key doesn't work for users with OEM licenses. Very annoying, but I can legally get a Dell reinstall drive instead. But Dell wouldn't send me reinstallation disks because my warranty with Dell expired.

  The result of this is that if your a manufacturer guarantee expired, you can no longer reinstall windows on the same computer!

  Dell says it is responsible for providing the relevant recovery media, including Windows used to do with the Digital River .isos, but who no longer work for people with Microsoft's Windows 7 OEM license. Microsoft says that it is the responsibility of Dell to provide its customers with the recovery media (disks to reinstall windows) in the first place. Personally, I'm not interested in the blame game - I just want to have access to a recovery media so I have the option of legally re - install windows 7 in the future with my OEM license.

  Can you help me with this problem? Thank you.

  Downloads Microsoft removing the Digital River and replacing them with a non-functional tool are extremely boring.

  If you can still start, update Dell backup and restore to the latest version:

  https://www.YouTube.com/watch?v=7yOz10Y8GCE

  http://www.Dell.com/support/home/drivers/DriversDetails?driverId=8HY96

  Make a USB (older than 2012 systems) recovery or recovery external hard drive (more recent than 2012 systems):

  https://www.YouTube.com/watch?v=hu6jx-QG7xE

  Boot from it to the new hard drive and use it to reinstall. Recovery media is using earlier versions may not work on the new disks.

• Spend first 2.2 to 3.0 - what is happening with our licenses?

  Hello

  Our client asked us to upgrade first the first 3.0 2.2. Procedure seems very easy (http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/q...), but my question is what is happening with our licenses.

  This first manages a few WLC with their AP and we have a Base license and life cycle of both with 100 to 150 (screenshot) devices attached. These licenses will be ok for first 3.0 or they will cease to work? In this case, Cisco will provide us with the equivalent license (toll-free) or we will have to purchese one another?

  Thank you very much!

  David

  2.2 IP licenses will continue to work without modification on the PI 3.0 server.

  I've done a few upgrades and it can confirm first-hand experience. It is also how it was designed to work according to the team of Cisco products.