Claire video becomes pixelated... badly

Similar Questions

• Why my video becomes pixelated with adobe sometimes in a video

  8.1 victory using 64 bit OS

  Yes, my superficial results indicate that it is specific to Windows 8.x and IE11.  As a solution, I don't see the problem in Chrome.

  I reported the bug following on your behalf:

  http://BugBase.Adobe.com/index.cfm?event=bug&ID=3798142

• When I adjust my video, so he can ride the framework, from 100 to 40, the video appears pixelated. How do I change so it will not look pixelated when I playback? Why am I wasting so much resolution?

  The resolution of reading is set on full as well as the definition of the sequence is on maximum render quality.

  
  

  I just think it is strange that once I drag the video in my calendar, the video was too important in the frame, and zoomed in, he looked much less pixelated. But once I throw the video from 100 to 46 to fit the frame, the video looks very bad and pixelated. I worked with this front camera for clips, in previous projects, but I've never encountered this problem. I use my iPhone 6 so my video is not too low resolution. Even the videos that I made after effects seems once slipped to the time line, but after scaling down to the frame (because it was too big in the framework) he lost his resolution.

  I even tried to export some of my video on the highest quality, and the video still looks pixelated.

  Make sure that sequence settings match the attributes of the source clip, then the framework should contain video. Right click on a clip in the project bin and use the new sequence of the Clip.

  You run in audio synchronization problems? I thought the iPhone using Variable Frame Rate records that first love not. Many users allows you to convert images to the hand brake before editing in first

  Thank you

  Jeff Pulera

  Safe Harbor computers

• "Back" button and the buttons Add on becoming pixelated.

  I noticed that my back button and my addons button in the upper right corner becomes pixelated.
  Here is a picture of what I see, this alone, it disappears if I open firefox safe mode.

  Image 1 - "back" button: http://i.imgur.com/PCc1iQI.png
  Image 2 - button "return": http://i.imgur.com/QKGefck.png
  Picture 3 - button Add-on: http://i.imgur.com/KLczXIp.png

  Image 3 the gradient does not stand still, but it shows scan lines expanded in the background of the add-on of LastPass.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Video becomes agitated at halfway to movies MP4

  Anyone having problems with playback of movies on the Surface?  I converted a couple of movies to the format MP4 in high and low quality... both very good start and then about an hour after the movie, the video becomes choppy.  The audio and the video will freeze for a second and then accelerate at random (looks like every 10-15 seconds, it does this).  I put movies on a USB 3.0, internal storage and micro SD HC... all the same results.

  Tour off my problem was with my video convert software... Beware of Wondershare.  Tested with Handbrake... videos play flawless.  Something good to say about free software!

• Place. File HAVE with text becomes pixelated + unnecessary layers

  Hey all,.

  I place often. Files HAVE in others. Files HAVE. I recently noticed that the text in placed files will sometimes become pixelated (become a form instead of text). Sometimes it's just one of the letters which becomes pixelated and the rest remains editable.

  In addition, there often a lot of unnecessary layers that come with the file then. The original file has a layer that contains a few groups, but after I place it will have 3 or 4 layers before you get to any of the groups. Any help?

  (With the help of Adobe Illustrator CC) (Place the.) HAVE as not linked or embedded)

  When you place a file HAVE you do not place the part of the file, but the PDF file. In the PDF effects are flattened, the text might get expanded (which depends on).

  Please see this on the file HAVE:

  This mysterious does Illustrator - saving files on Vimeo

• During text export JPEG becomes pixelated when printed

  I created a few art text in Illustrator I want to print as a poster. Whenever I have save the file as PDF (300 DPI) and print it myself the text will appear crispy with no pixelation. However, I want to post it to 18 x 24, that I can't do with my basic printer so when I print I print only part of the picture, but whatever lines are perfectly clear.

  I would be fine with leaving in PDF format, however, I have noticed most all plants ask a JPEG file for prints, which I can't understand because based on what I've read online, JPEG files automatically reduce the quality. Whenever I have the same export to JPEG (300 DPI) the text becomes pixelated.

  Is there anyway I can export this file to JPEG and not lose quality?

  If your document is set up at the scale 1:1 to the final output size then jpeg 300 dpi should look ok, as long as you choose 'export' in the menu file, DO NOT use the backup for web option, which will be released at 72 dpi.

  Make sure that you "the installation document" is 1:1 scale in the right units. so do 18 x 24 and make sure that your text is the size you want in this area.

  then choose file - export

  Choose jpeg

  then in the next window that appears, make sure that you choose at least 300 dpi (it may be higher if your computer has enough ram etc in order to treat her)

  ID choose the RGB color model if you print on the type of place that requires a jpeg file. and make sure that the "quality" slider is completely to the right for best quality compression.

  If its really not workign out, then you can try sending them a TIFF instead, which usually have compression artifacts (you can zip to reduce the size of the file after you save it)

  copy shops more low effort can usually work with tif or jpeg if they avoid pdf for some reason any.

• I started editing in 720 p, that's why all my shots are zoomed. And now, when I changed it to 1080 p, it becomes pixelated.

  I made a very tragic mistake. I started editing in 720 p, that's why all my shots are zoomed. And now, when I changed it to 1080 p, it becomes pixelated.what can I do? Is it possible to fix it? or do I have to re - edit the entire thing yet...

  Hi Please help me for my presentation! Really enjoyed

  [title published by mod]

  You should probably uncheck you scale to the size of the image.

• Why my brushes in photoshop cs6 suddenly become pixelated?

  I was working on photoshop, someday and I OWCsted my monitor before and all of a sudden all of the brushes have become pixelated. I tried using paint, Flash and Illustrator and it doesn't seem to be anything wrong with my monitor, just something wrong with photoshop. Brushes all look like they are guns or something when they are supposed to be smooth.

  Here is a screenshot of the different used brushes (soft and hard brushes)

  

  Help? Please?

  Check the mode of merger on the Brush tool - it looks like you put to dissolve and I forgot that you made this change.

• Smart objects become pixelated when re-scaling?

  I have Photoshop CS5.5 running on Windows 7 Home Premium 64-bit. When I place the vector objects in Illustrator and then go to re - the scale of their they become pixelated. I check the box anti-aliasing before committing the place, but they still Pixelize when re-scaling.

  Here is a screenshot to illustrate what I mean...

  

  You use the tool move or edit > Free transform to scale?

  Does make a difference if you use Edition > free transform with verified anti-aliasing?

  Also in photoshop Edit > Preferences > general check that the Interpolation of the Image is set to bicubic.

  

  

• NEWBIE - PE7 - finalized video becomes pixalated in WM & QT - Please HELP - project!

  Hello. I am new to this forum and have browsed this forum to see if there was a previous question dealing with my problem. Although I have not found one, I was impressed by the knowledge of the answer and the desire to help those in trouble, that's why I joined. I need help!

  I was PE7 mounted for a year and have no problems before. I do not make any changes to the settings that I am not an expert and don't understand what they mean or can do for my projects, but I've never had a problem of any kind before so it wasn't a problem. Now I have a problem. 

  I have two laptops that I use for editing. Is a Toshiba (chart below) and the other is a Dell (chart below). The Toshiba has firewire input and the Dell does not work so when I edit on the Dell, I introduced on the Toshiba and the film it via USB stick or external hard drive for the Dell printer. I've never had any problems before with this procedure.

  I don't change any of the presets that are there as I don't know anything whatsoever thereon. , All was well with both computers and I had no problem with PE7. I set up a video which is about 4 ½ long minutes with pictures that are imported in the Toshiba and then via external hard drive to Dell. I did the editing on the Dell. There many avi clips that I put as well as mp3 music. Video, music, and all the clips looked perfect even after making it. When I finalized it and done a windows media file and a quicktime movie, the video became pixelated in both formats. I don't have any other programs open when editing. It is pixelated in windows media player, quicktime player and when I play it PE7 too.

  I have PE8, but was waiting until I finished this installation project. However, when this problem occurred, I installed PE8 hoping he could solve the problem. It did not so I uninstalled PE8 and restored the computer to an earlier date when I installed PE8.

  Also, is there a way to return to the file was before finalizing this? It seemed perfect during playback even in full screen before finalizing the it. How can I get rid of the pixilation on this file?

  I've never had any problems before with computers. There is no change to the computers before the problem occurred.

  Oh, and I tried to edit together some of the original images in another folder on both computers to see if it was just this file, but two of them finalized pixilated. It is a unique problem (in the last week) and I never had this before.

  ~ Dell Inspiron 1545 (less than 3 months)

  CPU-acpi x 64 based pc/windows 7 Home premium

  Driver-Samsung sm320II, 6.1.7600 16385

  Processor: Pentium dual-core processor T4400 - 2.20 ghz

  RAM - 4.00 GB

  i.e. 8.0.7600.16385 - no update (do not update - had problems on previous machines after update)

  Free GB 283 173 GB

  Dell - PE7 Advanced export settings (not changed by me) - 320 x 240, 30 images/s/64 Kbps, 44 kHz, stereo vbr, compressed, vbr, 2 pass, spectators: coded 1, avg 448,00 (Kbps), video: video windows media 9, width of the frame (pixels) 320, height (pixels) 240, frame rates (fps) 30, pixel aspect ratio: square pixels (1.0), audio: bitrate variable mode without constraint/audio format 64 kbps 44 khz, vbr stereo

  File size: 12.7 MB, 4 min, 31 sec 0

  Imported on Toshiba and distributed via external hard drive to Dell. 

  ~ External hard drive - Seagate free agent fat32 442 GB 698 GB free

  ~ Toshiba Satellite A205 (3 years) / Vista Ultiimate

  Intel Core 2 cpu

  @1.73 Ghz T5300

  2046 MB RAM

  32-bit operating system

  IE 7.0.6000.16809IC - 256 bit - no recent updates

  Drive hard C - 22.5 GB free of 110 GB

  D-17, 2 GB free 149 GB HDD (it is puppy buying, I think)

  I hope I gave enough information so that you can help me with my problem. I'm not tech savvy, but I'll try.

  Thank you!

  For the pixelation problem, I think Steve has pointed to the top of the probable cause. These files must be consulted to the display size that they open in the player and has not increased, especially in full screen. Increasing the output image size will improve the display in full screen on a file AV Player I would do a test and / the share of exports to the size of the image in your project, to see that if the quality is improved - basically, you will be quadrupled resolution (2 x horizontal and vertical 2 x).

  Concerning the files deleted, back at the beginning.

  1.) when you Capture images, you create footage AV in AV files For example, if you have a DV SD project, you end up with files on your HARD drive (HDD), DV - AVI Type II where you run the program to place them. They will be the autonomous AV files, which can be played in playback AV software

  2.) these files are also linked to the two places, the organizer and the project Panel. These are just links to the DV - AVI files, and the physical files are still on the HARD drive and only connected to these places.

  (3.) when you create a new project, you write a database of XML (PREL) links and instructions. DV - AVI files are NOT in the project file - links to them and instructions on what will be done, when the data in these files are read in the release of a new single file. The original AV files are still on the HARD drive where you run the program to place.

  (4) when you drag the file from the project Panel, the organizer or the Source monitor AV, you drag not actually this AV file, but a proxy, which is linked to the original. You also place only one Instance of this file on the timeline and you can use the Source monitor Panel to change the Points In & Out of this forum and many of them use, and each may be different. All these link to the original DV - AVI, who is still on the HARD drive.

  5.) when you save your project, you can save this PREL (XML database) file and NOT the original assets. You just save the instructions on how to process the data from these files of original components.

  6.) when you share/Export, you use these statements in the file PREL, who will go to the original of the active files and extract only the data that you asked (by the Points In & Out) and then will gather these data, in the order you have chosen when you changed. It then processes this data, with all effects, Transitions, etc., that you have added and adjusted. This data extraction are then written in a new and original AV file, which will be placed where you head and name you have chosen. The original asset files are not affected, only the data copied from them.

  7.), you cannot delete the original components. They are NOT in the DOC, which contains only links to them where they are. If you do not delete them, you will need to retrieve and place them in their original locations.

  8.) if remove you them from the project Panel, you have deleted only the links to the original files and files of origin not themselves. You should get an error message that you remove the assets that are used in the timeline panel, asking you to confirm the deletion. If you choose to do, you will also lose the Instances of all of them in the timeline panel.

  9.) after making an export/Share, you have created a new, unique and totally separate AV file. He is not related to what whatsoever and is an AV stand-alone file, which can be copied, moved, Deleted and even imported into another project. If you delete that it affects your project in any way - unless, when you exported Shared to create this file, you have chosen add to the project, which will link to the new AV file and place in the project Panel. So, if you delete the original file, you will break the link to it in the project Panel.

  As you can see, a lot depends on exactly what remove you. If it's the PREL, or the original Captured AV files, you must retrieve those of trash. If you have emptied that, you will need to have a copy of these assets or the project file. In the case of the project folder, you could have backup automatically in this folder within the project folder structure. They might be pretty recent that you won't have to redo a lot of work, but you STILL have the files of original components to work with those.

  If you deleted the output file, created with export/Share, you can redo this right action and create a new.

  Hope that explains things better, and good luck,

  Hunt

• iPhone 4 s-video is pixelated in Premiere Pro

  I'm trying to import video from a new iPhone 4s in Premiere Pro, but the quality is terrible.  Every second or so Pixelation video pretty badly and it does so very rhythmicly more and more.  The project parameters are the default values and settings of sequence are AVCHD 1080 p 30 (even if you do not know why the settings of seq would be important - video quality is poor, as it appears in the window of the source monitor).

  I tried several different methods to import and I know not all this again with the first.  I noticed inside (with relatively good light) Pixelation worse than outdoors in full sun, but I'm still the see the Sun in a little more.

  If I bring you the video in iMovie, it seems good, but who wants to edit in iMovie?

  Thanks in advance for the help!

  Right click on the program monitor or click the exit button (three circles of RGB) and select read resolution > full.

• Why are my videos always pixelated?

  I'm mainly a 3D modeler, but from time to time a customer asks me to do something video/AE.  It seems that no matter what I do, I can't make a video without being pixelated, unless the file size is huge.   I use the H.264 codec that gets the file to a reasonable size, but as you can see, the quality is poor. Any help at all would be greatly appreciated.

  Dropbox - 2014 CHRISTMAS CARD.mp4

  If you went to the H.264 format in After Effects, do not.  Instead, make your video for delivery using Adobe Media Encoder codec.  It does a better job of it.

  You say nothing about your delivery specifications, which can have a significant impact on the quality of the image.

• After updating video PP CC badly coded exported 7.2.1

  I had no problem exporting a 7 minute film using the Vimeo 1080 on PP CC Version 7.0 codec.

  I've recently updated to the last, 7.2.1.   I then exported the same exact timeilne, using the same exact Codec to Vimeo.  After several attempts, the last 3 minutes of the exported video are badly coded.  No audio, video problem only.

  I then tried to export media * only the awkward place in minute 6 minute 7.   This clip has exported perfectly.   This problem seems to occur when the media export the complete sequence of 7 minutes.

  Please find enclosed pictures of reference.

  

  Mark and Joe,

  Thanks again for trying to offer ideas.   QuickTime and VLC or both give the same results during playback.     Toggle previews makes no difference.   Max is no made no difference.

  I spoke with tech support and we have removed the file preferenes as well as the removal of more than 30 GB of media that have been preserved up to cache files.   Then, we created a NEW project and import my existing sequence.   Export that out fixed the problem.

  We were not able to determine if this is the cover of media OR preferences file that really 'fixed' the issue.

• My video becomes negative

  I am Drag and Drop video AVCHD from the media to the project browser. About half of the time, the video image becomes negative and I can not understand how to change it. I can also understand why it happens sometimes. Do I need to import in a different way? Any help is appreciated. Thank you.

  What happens if you use the file--> import to use in the file? He normally plays in the external drives (like VLC)?