My video becomes negative

Similar Questions

• Video becomes agitated at halfway to movies MP4

  Anyone having problems with playback of movies on the Surface?  I converted a couple of movies to the format MP4 in high and low quality... both very good start and then about an hour after the movie, the video becomes choppy.  The audio and the video will freeze for a second and then accelerate at random (looks like every 10-15 seconds, it does this).  I put movies on a USB 3.0, internal storage and micro SD HC... all the same results.

  Tour off my problem was with my video convert software... Beware of Wondershare.  Tested with Handbrake... videos play flawless.  Something good to say about free software!

• Photos become negative in the lightroom develop module 6

  Hello
  I have been facing this problem for a long time and therefore were not able to use lightroom entirely.
  The images I import into lightroom appear very well when they are opened under the Library tab, but as I shift to the tab to develop the image quickly becomes a negative and so I am unable to do any post processing.

  I have also the screenshot for the same thing I f you want to see.

  Try disabling the 'Use graphics processor' choice in the Preferences dialogue Performance tab.

  HAL

• NEWBIE - PE7 - finalized video becomes pixalated in WM & QT - Please HELP - project!

  Hello. I am new to this forum and have browsed this forum to see if there was a previous question dealing with my problem. Although I have not found one, I was impressed by the knowledge of the answer and the desire to help those in trouble, that's why I joined. I need help!

  I was PE7 mounted for a year and have no problems before. I do not make any changes to the settings that I am not an expert and don't understand what they mean or can do for my projects, but I've never had a problem of any kind before so it wasn't a problem. Now I have a problem. 

  I have two laptops that I use for editing. Is a Toshiba (chart below) and the other is a Dell (chart below). The Toshiba has firewire input and the Dell does not work so when I edit on the Dell, I introduced on the Toshiba and the film it via USB stick or external hard drive for the Dell printer. I've never had any problems before with this procedure.

  I don't change any of the presets that are there as I don't know anything whatsoever thereon. , All was well with both computers and I had no problem with PE7. I set up a video which is about 4 ½ long minutes with pictures that are imported in the Toshiba and then via external hard drive to Dell. I did the editing on the Dell. There many avi clips that I put as well as mp3 music. Video, music, and all the clips looked perfect even after making it. When I finalized it and done a windows media file and a quicktime movie, the video became pixelated in both formats. I don't have any other programs open when editing. It is pixelated in windows media player, quicktime player and when I play it PE7 too.

  I have PE8, but was waiting until I finished this installation project. However, when this problem occurred, I installed PE8 hoping he could solve the problem. It did not so I uninstalled PE8 and restored the computer to an earlier date when I installed PE8.

  Also, is there a way to return to the file was before finalizing this? It seemed perfect during playback even in full screen before finalizing the it. How can I get rid of the pixilation on this file?

  I've never had any problems before with computers. There is no change to the computers before the problem occurred.

  Oh, and I tried to edit together some of the original images in another folder on both computers to see if it was just this file, but two of them finalized pixilated. It is a unique problem (in the last week) and I never had this before.

  ~ Dell Inspiron 1545 (less than 3 months)

  CPU-acpi x 64 based pc/windows 7 Home premium

  Driver-Samsung sm320II, 6.1.7600 16385

  Processor: Pentium dual-core processor T4400 - 2.20 ghz

  RAM - 4.00 GB

  i.e. 8.0.7600.16385 - no update (do not update - had problems on previous machines after update)

  Free GB 283 173 GB

  Dell - PE7 Advanced export settings (not changed by me) - 320 x 240, 30 images/s/64 Kbps, 44 kHz, stereo vbr, compressed, vbr, 2 pass, spectators: coded 1, avg 448,00 (Kbps), video: video windows media 9, width of the frame (pixels) 320, height (pixels) 240, frame rates (fps) 30, pixel aspect ratio: square pixels (1.0), audio: bitrate variable mode without constraint/audio format 64 kbps 44 khz, vbr stereo

  File size: 12.7 MB, 4 min, 31 sec 0

  Imported on Toshiba and distributed via external hard drive to Dell. 

  ~ External hard drive - Seagate free agent fat32 442 GB 698 GB free

  ~ Toshiba Satellite A205 (3 years) / Vista Ultiimate

  Intel Core 2 cpu

  @1.73 Ghz T5300

  2046 MB RAM

  32-bit operating system

  IE 7.0.6000.16809IC - 256 bit - no recent updates

  Drive hard C - 22.5 GB free of 110 GB

  D-17, 2 GB free 149 GB HDD (it is puppy buying, I think)

  I hope I gave enough information so that you can help me with my problem. I'm not tech savvy, but I'll try.

  Thank you!

  For the pixelation problem, I think Steve has pointed to the top of the probable cause. These files must be consulted to the display size that they open in the player and has not increased, especially in full screen. Increasing the output image size will improve the display in full screen on a file AV Player I would do a test and / the share of exports to the size of the image in your project, to see that if the quality is improved - basically, you will be quadrupled resolution (2 x horizontal and vertical 2 x).

  Concerning the files deleted, back at the beginning.

  1.) when you Capture images, you create footage AV in AV files For example, if you have a DV SD project, you end up with files on your HARD drive (HDD), DV - AVI Type II where you run the program to place them. They will be the autonomous AV files, which can be played in playback AV software

  2.) these files are also linked to the two places, the organizer and the project Panel. These are just links to the DV - AVI files, and the physical files are still on the HARD drive and only connected to these places.

  (3.) when you create a new project, you write a database of XML (PREL) links and instructions. DV - AVI files are NOT in the project file - links to them and instructions on what will be done, when the data in these files are read in the release of a new single file. The original AV files are still on the HARD drive where you run the program to place.

  (4) when you drag the file from the project Panel, the organizer or the Source monitor AV, you drag not actually this AV file, but a proxy, which is linked to the original. You also place only one Instance of this file on the timeline and you can use the Source monitor Panel to change the Points In & Out of this forum and many of them use, and each may be different. All these link to the original DV - AVI, who is still on the HARD drive.

  5.) when you save your project, you can save this PREL (XML database) file and NOT the original assets. You just save the instructions on how to process the data from these files of original components.

  6.) when you share/Export, you use these statements in the file PREL, who will go to the original of the active files and extract only the data that you asked (by the Points In & Out) and then will gather these data, in the order you have chosen when you changed. It then processes this data, with all effects, Transitions, etc., that you have added and adjusted. This data extraction are then written in a new and original AV file, which will be placed where you head and name you have chosen. The original asset files are not affected, only the data copied from them.

  7.), you cannot delete the original components. They are NOT in the DOC, which contains only links to them where they are. If you do not delete them, you will need to retrieve and place them in their original locations.

  8.) if remove you them from the project Panel, you have deleted only the links to the original files and files of origin not themselves. You should get an error message that you remove the assets that are used in the timeline panel, asking you to confirm the deletion. If you choose to do, you will also lose the Instances of all of them in the timeline panel.

  9.) after making an export/Share, you have created a new, unique and totally separate AV file. He is not related to what whatsoever and is an AV stand-alone file, which can be copied, moved, Deleted and even imported into another project. If you delete that it affects your project in any way - unless, when you exported Shared to create this file, you have chosen add to the project, which will link to the new AV file and place in the project Panel. So, if you delete the original file, you will break the link to it in the project Panel.

  As you can see, a lot depends on exactly what remove you. If it's the PREL, or the original Captured AV files, you must retrieve those of trash. If you have emptied that, you will need to have a copy of these assets or the project file. In the case of the project folder, you could have backup automatically in this folder within the project folder structure. They might be pretty recent that you won't have to redo a lot of work, but you STILL have the files of original components to work with those.

  If you deleted the output file, created with export/Share, you can redo this right action and create a new.

  Hope that explains things better, and good luck,

  Hunt

• Claire video becomes pixelated... badly

  I use Crystal clear images of 1920 x 1080 for my Canon EOS and it is coming through terribly pixelated in my first 12 items. When I visited, and save it, it is just as bad.

  There may be a correlation with the addition of text. It looked worse afterwards.

  First of all I wouldn't choose mpeg2 and then you're exporting a 29.97 to 24 fps timeline.

  If it comes to TV choose H.264 and stick to 29.97 FPS.

  Under the AVCHD, you will find some 30 1920x1080p H.264 mp4. Can try this.

  Your calendar is interlaced. Your files are interlaced?

• Why my video becomes pixelated with adobe sometimes in a video

  8.1 victory using 64 bit OS

  Yes, my superficial results indicate that it is specific to Windows 8.x and IE11.  As a solution, I don't see the problem in Chrome.

  I reported the bug following on your behalf:

  http://BugBase.Adobe.com/index.cfm?event=bug&ID=3798142

• After being opened for a while (with several tabs) Firefox does generally and repeatedly play a sound - video will play again, but not sound.

  This problem started happening only recently. I often keep my Firefox open all night with sites like rainymood.com or grooveshark.com playing, as well as several other tabs, including but not limited to Facebook, YouTube, and Reddit. Sometimes, after a few hours/days to not restart Firefox or my computer, Firefox starts to become insensitive - i.e., pages take a long time to load, opening new tabs is difficult for the browser and videos will have up to 30 seconds to start playing. In addition, the sound stops playing. If I start a YouTube video, after the initial period of excessive load, the video will play, but without any audio. Also, sites such as rainymood.com and grooveshark, even Facebook, stop sound.

  Note that this is different from an incident of flash plugin - when flash falls down, the audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; If I refresh the tab, nothing changes, and even if I restart Firefox, it opens the same way again until I restart my computer completely.

  Also of note: I had, in the past, this same thing happens, but rainymood.com continued to play, however no other tabs would make sound. The problem is sporadic and I don't know where to start. Also, sometimes it's only a problem of Firefox specific, which means other programs on my computer can make sounds, but sometimes this problem makes my computer all stop making sounds, with the exception of Ventrilo, which works, but is also insensitive in the beginning.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Scroll of embedded flash video pauses/chops

  I'm having a problem that started when I updated to FF13. When I scroll a current page (up or down) a video (like youtube) the integrated video becomes AX, broken, distorted, and mess with the visual appearance of the site I visit.

  If I scroll up and down a lot, I actually get to visually reproduce the site in the area where the embedded video is supposed to be. It's pretty weird.

  My video drivers have been completely updated since and has not fixed the problem.

  I tried FF in safe mode and that has not fixed the problem.

  All my add ons and plugins are completely up to date. Plugins I use are adblock and noscript (both disabled during the test and the site allowed).

  Anyone know what could be the cause of the issue since upgrade to FF13? I think it may have something to do with Flash.

  See https://www.adobe.com/support/security/index.html#flashplayer

• Slow down the video with NBPC CQ42-273TU problem

  Hello

  I have NBPC Compaq Presario CQ42-273TU.  In my laptop, if I play the video, it becomes very slow. After the video becomes slow, everything else on the laptop becomes slow. recently I gave laptop for the service too, and I also have the problem with the video.

  Hi Mrs.Tenter,

  Thanks for the reply.

  The service center people have no software installed. A hardware problem was there. They solved this problem.

  Thank you

  Hema

• Windows Media Player 11, DVD video, not big enough in fullscreen

  During playback of movies DVD with WMP 11 and in full screen, the video does not stretch to the edge of the screen.

  I have a flat screen monitor set to 1600 x 900. When I entered the mode full screen the video becomes a bit larger, but does not fill the edges of the screen. In other players such as InterWinDVD player or video Media Player Classic DVD of the CCCP play full screen completely to the edges of the screen (except for two black borders on the top and bottom do wide screen of culture).

  However in WMP 11 200% is not big enough. I was wondering if it is possible to get the video to play 300 or 400% in size?

  Here's what I mean:
  http://img44.imageshack.us/i/wmp11problems.jpg/

  Notice how the video area (Pink) is not stretched to fit the vertical edges of the screen.

  I really like WMP 11 due to SRS wow effects. Unfortunately, since the upgrade to a monitor flat screen with a resolution of 1600 x 900 WMP 11 the fact that the culture of the video. Other players I use InterWin DVD or the Media Player Classic CCCP do that mean the culture of the video. I am running Windows XP with SP3.

  Hey Helldiver.

  Check if you have the plug-ins installed to support the features of DVDs on your Media Player. Windows Media Player is a complete DVD player when combined with a DVD decoder (MPEG-2 decoder) with features such as full-screen video playback controls, ads chapter DVD and integrated pouch.

  If you are running Windows Vista Home Premium or Windows Vista Ultimate, DVD capabilities are included as part of the operating system. If you are running Windows Vista Home Basic, Windows Vista business, or Windows Vista Enterprise, you can enhance your DVD playback experience by purchasing a pack of decoder DVD or upgrade to a more powerful version of Windows Vista.

  Here is a link to the list of plugins that you can install to get the features of full fledge for you DVD:

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Try to install these plug-ins and see if you can get the service your DVD playback fullscreen

  Thank you

  Kind regards
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Archives / video scheduling in SnS

  When you post a video in the show and share, you can schedule a video.  One of the options when planning is to archive the video after a specified time.  I have learned that when your video hits on the duration specified for archiving, your video should go back to the planning stage.  My videos become hidden, but are still published.  You see them unless you are looking for them.  How it is supposed to work?

  Yes the video archive it hides from view but always present and available video by people who might see him origninally by searching.

• I burned a dvd using windows dvd creation, when I watch it, after the first 20 minutes, that the image becomes almost black and white with pink exaggeratted shadows. WHY?

  I am compiling my football teams game film.  I created a dvd using Windows DVD Maker.  Each game is a single video file to AVI format.  When I preview the video, no problem. After having carved, (2 trials) when I watch the DVD, the menu screens look good, the video of the first part looks fine, but from second game, or of the stage, the video quality changes.  The video becomes almost black and white.  The shadows and the highlights of the video seem to be exaggerated and that they are pink color.  It seems to be an effect of video editing, but I did no changes to the video features.  Help.

  HI Maria,

  Thanks for posting this question in the Microsoft Community.

  If I understand correctly you are facing a problem with the DVD created in Windows DVD maker.

  I'll do my best to get the problem resolved.

  You can go through the steps in the article and check if it helps. Here is another article on changing some settings of the DVD creation. Go through it and tell us if it helps.

  You can also see the article for more information about video filters in Windows DVD Maker.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• When I try to watch a video on the web, the video does not show it's a black screen.

  I've had this laptop since 2010 and I could see the videos on the web without problem, but all of a sudden I can no longer watch videos. When I press on play video becomes black and nothing plays. I wonder what's the problem?

  Hello

  1 are you facing this problem with a specific Web site?
   
  2. what browser do you use to surf the web?
   
  3. what was the recent change in hardware or software performed on the computer before the question?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 of the article mentioned above to start the computer in normal startup, once you have completed the necessary troubleshooting.

  Method 2
   
  The video problems when you use Internet Explorer
   
  http://support.Microsoft.com/kb/2532294
   
  Please RRSP at this link if you are using an older version of Windows media player.
   
  http://support.Microsoft.com/kb/909554
   
  I also suggest to run a network utility to verify network connectivity problems.
   
  In Windows network connection issues

   

  http://support.Microsoft.com/kb/313242
   
  I hope this helps.

• No video after stabilisation of Warp

  When I apply the stabilizing Warp effect to a clip, it seems to go through the process as it normally would be (analyze/stabilize), but when it's done, the video becomes black as if there is no video to display. It is only on the clip that I apply the effect to.

  I work with first Pro CC on Windows 10.

  Any ideas or help would be greatly appreciated.

  Hi PWG_plambrecht,

  In addition, try this:

  -Go to file > project settings > General and change the "Video Renderer" to "only Mercury playback engine software. Click 'OK' and select 'Remove the Previews'

  Hope that helps.

  Regalo

• Paint over the video after the addition of adjustment layer?

  Hi all

  I have a little video, 30 seconds, and I try to draw the frame by frame on top of the video with a brush. While it's easy I would first change the black and white video. By adding a black and white adjustment layer, it does not allow with a brush. I was wondering if there was another way to select all the images in the video and change it to black and white while helping paint me over it frame by frame.

  Thank you

  I struggled to learn by trial and error, so my workflow is questionable, but I'll try and at least help you get started.  My screenshot is too big for the page, then click to expand to see comfortably.

  So I started with a group of video with the Lady driving a cow.  This is the video Group 1.  With the video layer selected in the layers panel, I add a B & W adjustment panel and my video becomes black and white.

  To add an animation on top of that, I have to make a new video group using the small movie icon at the left end of the Timeline.

  For me, I see the second group of video, and so I have to drag the timeline at the bottom of the page and make more great by dragging its lower edge.

  You need something to draw, so with the video Group 2 twirl open, add a layer. It will be too long, but don't worry at this stage.

  Make your drawing on this layer.  If you want that the animation to change two images, move forward two frames of the time indicator and use the scissors to cut the video group at that time.

  You will need to market the onion skins (steal our in the upper right corner of the scenario)

  You will now be able to see a ghost of the last image to use as a guide to draw on the other.

  Note: every time you cut the track, it will create a new layer draw.  By clicking on an item in the Assembly will select this layer.

  Therefore, my axe up to attempt using video editing for animation.  Until very recently I agreeing me with those who cannot not work why onion skins isn't available only for video and image animations.  It was an ordinary user error!   I'm sure that you'll be able to Polish my clumsy workflow, and I'd appreciate a heads up if you do.

  Good luck and patience.  Lots and lots of patience.