Clean install for XP

Similar Questions

• Option Clean-Install for Windows 7

  I think that's what it's called. You know, the one where he deletes everything? Yes, that one.

  That's what I did for my HP Pavilion dv6t laptop when I've upgraded Windows Vista to Windows 7. I think that this messed up some of my installed software and drivers.

  I first noticed small issues (like when I raise or lower the volume, the animation does not come on the screen). Then I realized that my computer is not read or burn CDs, and the webcam is still not working properly when recording.

  I tried the HP site and its driver updates and they did not seem to do anything for me. None of them seems to be specific to the problems I have in any case.

  Any help you can give me would be greatly appreciated!

  Thank you

  I didn't say anything on bass and treble, about the animation volume screen that normally is supposed to happen.

  In addition, my burner is now "not found".

  And Yes, I bought my laptop directly from HP and they sent me the upgrade.

  Also, I took a few screenshots that I've been through the process of troubleshooting HP. I'll put the links below.

  In my device manager, these drivers seem to have problems. The small point of triangle / exclamation yellow attention comes up next to them, with the following error as written notice.

  _______________________________________________________________

  DVD/CD-ROM Drives

  -Optiarc DVD RW AD-7561

  -Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  -Devices of Human Interface

  -ENE CIR Receiver

  -This device cannot start. (Code 10)

  -HID compliant consumer control device

  -Complaint HID device

  ... etc, etc.

  ________________________________________________________________

  http://Tinypic.com/r/ephzwi/7

  http://Tinypic.com/r/2k3tl3/7

  http://Tinypic.com/r/3328004/7

  EDIT: I solved the problem by using this Web site:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Only, this fixed the problem of CD/DVD-ROM. I can now read and burn CDs. However, other issues have not been set, but I find them to be much less important.

• Unable to get updates of Windows after cleaning installed.

  Inspiron 1720, Win7 Ultimate x 64

  A clean installed today on a separate partition. Did not remove the existing installation of the same operating system by using the same key. The new facility will not download updates. C:\ shows many files from Windows.old. No matter what jump to anyone or is this Win10 Win10?

  PS This switch to Win7 Professional would help the situation?

  I should add that it is a slipstreamed SP1 version. I was able to get IE 11 installed without problem.

  Theres been a few problems with Windows Update with Windows 7 clean install for these last months... You can use the WSUS Offline Update Patch Windows 7, after that Windows Update works.

  http://dellwindowsreinstallationguide.com/WSUS-offline-update/

  However since your goal is to make your system a Pro 10 Windows device. You better just download an .iso Windows 10 TH2 and pure install directly with your Windows 7 Ultimate product key:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  https://www.YouTube.com/playlist?list=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr

• HP envy h8 1569: clean install of win 8.1 for ssd

  I want to upgrade my computer with an ssd.  I would like to do a clean install.  I'm Henry key for the operating system. It is not the system operating provided ith the system but I updated to win 8 to 8.1.  Can I do a clean install with this information and the iso file downloaded from Microsoft?

  Thank you

  Hello

  See the following link.

  http://Windows.Microsoft.com/en-GB/Windows-8/create-reset-refresh-media

  Kind regards

  DP - K

• RN v1 duo set for Time Machine and after a clean install of Yosemite I can't access my data

  Hi guys,.

  I have the ReadyNas duo v1 set for Time Machine and after a clean install of Yosemite I can't access my data.

  When I try via the Finder, files look for empty to me while info shows that they are not.

  I have no more support and I tried everything I could but all my data remains inaccessible.

  

  

  I have finally reached my backup via Time Machine, it was temporary unavailable yesterday.

  Thank you guys!

• Drivers for clean install win 10 for HP Pro 3400 Series

  Updated my Win 7 Professional 64-bit of Windows 10. Now, I need to clean the re - install windows 10. My question is will I delete the partition D with front factory recovery software I own installation, and that I will need to download the HP website after drivers clean install?

  There is no specific driver for Windows 10 for your PC.

  You can download the Windows 7 and Windows 8 drivers and try to install in compatibility troublkeshoot mode.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5159752&swLangOid=8&swEnvOid=4132

  Choose Windows 7 as the previous operating system.

  I tend to leave the intact recovery partition, that you may very well discover that the OS is more suited to your particular old gen Windows 7 PC.

• What drivers to download for a clean install of Windows 7?

  I'm working on a clean install of Windows 7 Enterprise SP1 on my HP Pavilion computer of bureau a6600f (originally there was Vista, now he has Windows 7 Ultimate). The machine is stable but really slow.

  If I want to download the drivers and others, which is here. But I don't really know what are those who... just do each of them?

  and then after installing Windows 7, I have just install these one by one?

  Here are the specifications of your desktop HP Pavilion a6600f. Based on the specifications, this model uses a nVidia Chipset nVidia Graphics, nVidia Network and Realtek HD Audio. If you have already done, I would update the BIOS first. I skip the installation of the HP drivers and go directly to the sites of the manufacturer for the latest drivers chipset.

  nForce Driver v15.56 for Windows 7 64-bit (Ethernet, SATA/IDE, SMBUS, pilot EMS and Away Mode driver)

  V307.83 GeForce Driver for Windows 7 64 bit (Graph)

  Realtek HD Audio Driver for Windows (Tick 'Accept', click 'Next', years download location for 3rd item to the bottom of the list)

  I think that your 'slowness' is due to the entry level Pentium E2200 CPU and only 3 GB of RAM. Consider one of the better microprocessors on the list and the upgrade to 4 GB RAM HP.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I need drivers for 2 unknown devices in the T60 Windows 7 clean install

  After a clean install of Windows 7 on my T60 87414BU install all drivers, I was able to recognize I have yet 2 Virtuelperipherique unknown by the screenshot below, for which I was able to find the drivers for.

  

  Suggestions or are these legacy devices for which no drivers are required under Windows 7? Disable the devices?

  These three basic features is your Ricoh 4 in 1 card reader. The Vista drivers are working perfectly.

  Ricoh Multi Card Reader 32/64 bit Vista drivers.

• Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

  Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59664.exe

  Another option: click on the following link and click Search now :

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5306751#N2316

  Kind regards.

• Download Windows XP for free if I can do a 'Clean Install' of the system?

  "flatten and rebuild" process for Windows XP?

  How can I go about the process of 'flatten and rebuild' for Windows XP?  Download Windows XP for free if I can do a 'Clean Install' of this system?

  If you have a computer from a "direct OEMS" (e.g., Dell, HP, etc.), it is without doubt a restore hidden on the hard disk partition.  How access and use this feature differs between manufacturers, so again you must call the computer manufacturer or visit its web site.

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Upgraded Vista Business OEM for Vista Ultimate w/o a clean install?

  Have Vista Business OEM on my Fujitsu tablet.  As said Fujitsu Tablet does not Win 7, I bought a Ultimate Upgrade from Amazon.  Everytime I try to upgrade, it tells me that I have to clean install because my version is too old for a upgrade path.  Too OLD?  What the devil?  Everything I read says that it must be a version of vista. I have read nothing that requires that the software that I have not "too old".  I don't say anything that he cannot be an OEM, either.  Just a version of Vista (legitimate copy is deducted). How can I get around this non sequitar?

  Thank you

  Uninstall Norton.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Download and run the Norton removal tool to uninstall your Norton product

  Mick Murphy - Microsoft partner

• A clean install of Windows 7 x 64 takes forever to search for updates

  Don't know why, but the update takes forever to search on a clean install of windows. I made a lot of clean installations of Windows 7 before, but never had a problem with the receipt of the updates. But this time, it just doesn't go as far in receiving updates.

  I don't have any firewall or antivirus programs installed on this system. Just new installation of windows 7. Tried the pro versions and at the same time with the same result.

  Here's onedrive link for the log file

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

  Generally updates for Windows 7 can take more than 24 hours to get the list of those available.

• I have a WIndows 7 Ultimate operating system failure and required a drive for a clean install. I have the product key, but Microsoft offers no English option.

  I have a Windows 7 Ultimate active computer that was swarming (STRONGLY) of malware/virus/junk files/adware...

  I think I have cleaned out, but want to do a clean to be sure install, but I have no partition recovery (may be erased by a virus?) and no recovery dick.

  I went to the Microsoft website and entered my product key.  He has been recognized as Windows 7 Ultimate, but when I had to choose a language, English was not available.

  Any solution, or should I continue to use the computer and all hope is clean?

  EDIT - I installed the windows 10 (using an ISO image) on Windows 7.  I do not enter the product key when asked (the program said I could jump at this stage of the installation).  Installation went well.

  I then checked to activate Windows 10 - it activated without any difficulty.

  I will now try a clean install...

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• help clean install of Windows 7 for my laptop...

  Hey, I'm on Toshiba Satellite C655-S5312 which was pre installed with Windows 7 home premium ... now it becomes slow... I did a System Recovary... .but yet its slow start... .some time now, I think for a dry-cleaning facility and I have my Installed windows 7 activation key... so do a clean install with a original iso file of windows 7 Home premium 64 bit... which i torrent download using this activation key? Please do emotional assistance... I thank you for reading this ...

  It should work.

  I used a purchased copy of Windows 7 to do a fresh install of Windows 7 installed OEM by using the same key as the OEM.  During the installation it ask for the product key and I had to skip that part until the new facility is completed. The reason to skip the product key during the installation is because it looks like "Invalid product key" or something along that line. Then I right click My Computer\Properties and at the bottom of the page click on change the product key and seized the key for the OEM. He was then accepted and activated Windows. Good luck with it.