Clean install of Windows 7 Professional on a new ssd.
I intend to buy an ssd. my pc was originally run under windows vista and I had him upgraded to windows 7 Professional. is it possible to do a clean install of my windows 7 Professional on the new ssd? If so, how? and Microsoft will allow this? It's always the same pc.
If you have a win7 upgrade version, you must install the earlier version of the victory first then move to win7.
If your version of Vista was preinstalled by the PC manufacturer you pourriez have encountered problems with your recovery disc for the ssd.
Personally I would not buy a smaller than 256 GB ssd
Depending on the size of your current C drive, it might be better advised to clone the SSD using a third party, software of imagery of the installation, for example Acronis TI, as she has more options than the buit in win7 imaging tool
Tags: Windows
Similar Questions
-
I would do a clean install of windows 7 Professional 64 bit in my hp probook 4540 s
I would like to do a clean install of windows 7 Professional 64-bit in my hp probook 4540s.after install exactly what are the necessary to install drivers and whence? Thank you
Hello:
Here is the link to the support page and drivers for your laptop.
Now, we can tell you exactly what drivers to install the adapter wireless because he could be one of several models installed in your laptop.
You must install the following drivers in this order.
Chipset: Installation and reboot
Video: How to know what graphics card is in your notebook (AMD or Intel). Install and reboot.
Audio: Installation and reboot
Wired network:
Then these are the drivers, I know that you will need:
Paul
-
How to do a clean install of Windows 7 Professional of a DVD on the ProBook s 4530?
So I have Windows 7 Home Premium 64 - bit installed on my laptop and I want to get rid of it completely and to do a clean install of Windows 7 Professional 64 bit from a DVD.
I don't want to use windows anytime upgrade somehow! Because I have a few serious bugs with my current installation and a clean install, I can be sure to get rid of themI'd appreciate if someone could tell me how exactly to do this and if all my data will be deleted. If so, will it download all drivers HP and the software again by myself? :/
roby1324 wrote:
Bugs are not serious but they affect several programs and it is impossible to use my laptop, I was doing.
And no, I have no recovery option, I don't have any dvd with my laptop, or something like that and personally I didn't do all the backups. Which was a mistake that I won't repeat.
In addition, because of my college, I get a free copy of win 7 professional so why not use it?
I have already burned on a DVD, now I just need to detail how a facility own n_n
So after I installed win 7 Professional I just copy and replace Driverstore and C:\WINDOWS\SYSTEM32\DRVSTORE instead of download the drivers?
BTW, I'll accept your next answer as the snapYou will use the copied Driverstore and C:\WINDOWS\SYSTEM32\DRVSTORE for is the source of the drivers when you then. Do not replace the folder in the new installation of Windows with the folder that you copied from the initial installation of Windows. It would not be a good idea.
Once you have done the copy of the file and have it practice you can simply put the installation DVD into the DVD drive and boot from it. There will be a point where asks you if you want to save your previous installation. Say no to it.
At this stage you can always do a defined recovery disk. I recommend that you do this. This is the copy of the operating system and drivers you purcased your PC with. If you do not want is not a problem like UO can always buy it at HP over the next years.
Best regards
ERICO
-
Clean install of Windows XP Professional on a WD 500 GB SATA2 HDD
Respected members, I've never ever had this problem. Today I bought a HDD WD 500 GB SATA2 16 MB buffer.
I tried to do a clean installation of windows xp professional on this topic (quick format) but each time the installation is complete to copy of files and restarts the computer, when it tries to boot from a hard drive it gives me an error any hardware problem.
"Windows did not start because of a configuration of the disk of the computer problem.
Could not read from the selected boot disk. Check the hardware path and startup disk.
Please check the Windows documentation about hardware disk configuration and your hardware for more information reference manuals. »
The next time I try to boot from it, she said something about "hal.dll" missing. Do you think that this may be a hardware problem (but I am reminding you that I bought today, it's new, it's a warancy) or windows xp pro sp2 is not supported for the 500 GB hard drive (which I know is not possible: S)
Hoping for an answer
Thanks in advance
Marko Todoric
Serbia
Is this the only drive in the system? If so, run the disk Western Digital diagnostic utility. No matter that the reader is right out of the box. In fact, if the material is going to fail, it will normally be done fairly quickly - sometimes right out of the box - or go for years.
If the drive passes the test, try "slipstreaming" of your installation of XP with Service Pack 3 media.
http://theeldergeek.com/slipstreamed_xpsp3_cd.htm
If the drive is not the only le seul in the system, disconnect the other and try the installation again. The missing hal.dll indicates a damaged or missing boot.ini file and possibly other startup files. If you have an old IDE drive in the boot.ini system file is probably on that instead of on the new drive where it belongs.
MS - MVP - Elephant Boy computers - don't panic!
-
Well, here's my situation...
(1) purchased a computer with windows vista (32-bit) on it earlier
- Did not get a recovery disk.
- There is no 'sticker' on the computer indicating the type of vista (home etc.) or the product key.
(2) used my student account at Microsoft to buy Windows 7 Professional 32 bit
- I have the product id and product key.
- I burned the ISO image to a disc (the disc has now lost) and ran it by restarting.
- I chose the upgrade instead of the fresh start option since I wanted to keep my files.
- Everything worked well.
(3) my computer is slow because this year, I had downloaded a lot of software. Instead of uninstalling stuff, I recorded all important files on a disc and completely erased from my hard drive to a new beginning. I took measures
- Created a system repair disc.
- Downloaded the software used to wipe my hard drive - Boot and Nuke.
- Engraved Boot and Nuke on a disc.
- Ran the disc by restarting.
- Boot and Nuke wiped the hard drive successfully.
- Inserted the repair disc Windows 7 that I created earlier and rebooted.
- Went through steps, nothing not arrived and began to receive an error message.
- Learned that I needed more than the floppy disk repair.
(4) my troubleshooting and what I tried
- On another computer, I downloaded the iso image of Windows 7 Professional SP1 32 bit and it burned.
- Ran the disc by restarting.
- I got to the screen to enter the product key and I did it, but he said that "the product key is invalid.
- Discovered that I have a key for Windows 7 Professional 32-bit (but not the SP1 version). So I downloaded the iso for the RTM of Windows 7 Professional.
- Ran the disc by restarting.
- I got to the screen to enter the product key and I did it, but he said that "the product key is invalid.
Quick review:
(1) I have the product id and the product key for Windows 7, I bought with my student account.(2) I do not have the version of Vista that was installed at the factory and did I not the id product or the product key.(3) I tried the product key Windows 7 Professional 32 bit I have with the SP1 and RTM version without success.(4) I am 100% sure that I'm in the keys properly. Without typos.I don't know what I can do. What I am doing wrong? Is there hope for my situation? I don't want to spend money so please do not suggest buying another copy.An explanation I can find is that I actually purchased the Windows 7 Professional 32 Bit update. If this is the case, what are my options? I recently explored microsoftstore and recently found a Windows 7 Professional Upgrade sold to students it might be what I bought. So, what should I do?Edit:I remember that one of the reasons why I want to get Windows 7 Professional was because of Aero and the only Windows Vista who have not Aero has Windows Vista Home Basic is the type of the operating system has been installed at that time, but I still have not the product id or the product key for this factory installed OS. Personally, I removed the sticker at the rear of the laptop thinking hey what I need at the moment? I don't have Vista any more I have the product key for Windows 7 that I just bought. But now I need it. :/ I hope someone has a solution out there.Thanks in advance for any suggestions and help.However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
(64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?... from a flash drive?... to change the boot order?... or at all?
Hello
That's right; with Vista Home Premiun upgrade paths are for Windows 7 Home Premium or Ultimate.
It is one of the reasons why you should do a clean install.
The other reason is that you can NOT put 32-bit to 64-bit.
You need a clean install to do.
Follow these steps before you install or buy Windows 7:
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
«Installation and reinstallation of Windows 7»
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
_________________________________________
And it's a way to do the clean install of Windows 7 DVD forn and Flash Player
http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html
Using the USB method:
http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html
See you soon
-
Portege Z830 - on a clean install of windows access keys
What do I need to work the KEYS FN on a clean install of Windows?
I have a Toshiba Portege Z830, width window 8.1 Professional (he cams 7 width windows).
The first time I installed windows 8, I'm doing the hotkey working width drivers Toshiba a upgrade of windows 8.
But now, after a new installation, it does not work.Some keys work, such as FN + 3 or 4 for the sound. But I think that it is a feature of windows. I need the combination of brightness FN + F6 or F7, and they do not work.
What should I install? I read that I have to install the driver of Toshiba value added package system, but it does not work. There is also a utillity called Toshiba function key.
What should I install?
Thanks ;)
*@Infocomit*
Don t be angry with me, but you're wrong. Sometimes it s advisable to check some things twice.
Driver Toshiba UE page provides details and description on the drivers and utilities.
If you need to get the details about the unique software, click on the red arrow in the Details column.By the way: it's community of users.
-
I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error
Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error
About to panic. Could use some real help on this and not only refers to
http://support.Microsoft.com/kb/836941
The computer is a Dell Optiplex GX280
What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
Internet works fine on the device, I am writing to you from him.
Also, tried installing IE8 on one computer and run windows update, same error.
I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error
Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error
About to panic. Could use some real help on this and not only refers to
http://support.Microsoft.com/kb/836941The computer is a Dell Optiplex GX280
What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
Internet works fine on the device, I am writing to you from him.Also, tried installing IE8 on one computer and run windows update, same error.
Relax and breathe.
FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.
You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:
Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
Install it.
Then restart at least a couple of times for a few minutes between each restart.
Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
Install it.
Then restart at least a couple of times for a few minutes between each restart.
Download at least Internet Explorer 7 (if it is not Internet Explorer 8).
Install it.
Reset.
Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.
Back - let everyone know if it worked for you.
-
Can not access the updates after clean install of Windows 7 Pro
I have formatted my hard drive digital, preformed a clean install of Windows 7 Pro. Everything went well and OS seems to be properly authenticated.
The question is not able to 'find' updates. At startup, the message: NEW UPDATES AVAILABLE. When I check the updates, the process runs "forever" and never completes the process. The problem would be to my use of Office 2003? I have installed for messaging and Outlook calendar. Here's the MGADiag.exe diagnostic tests.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 96DXD - 3PDHD-FC6KT
Windows Product Key hash: FiWgfb/HBGU plus 7qzKd5NATMcX2iI
Windows product ID: 00371-OEM-9314963-39295
Windows product ID type: 8
Windows license type: COA SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {0AC450E6-A3AD-405E-B244-B6074CECBF8A} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 100 authentic
Microsoft Office Standard Edition 2003 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]
Other data-->
Office details:
{0AC450E6-A3AD-405E-B244-B6074CECBF8A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-FC6KT 00371-OEM-9314963-39295 8 S-1-5-21-323565687-595391911-2700631585 Dell Inc.. Latitude D630 Dell Inc.. A16 20090714000000.000000 + 000DE083907018400FA 0409 0409 Mountain Standard Time(GMT-07:00) 0 3 DELL M08 100 100 Microsoft Office Standard Edition 2003 11 qQgWhuDYJMzZ2Ra9gyv5SUkXuJA = 70141-051-9705975-56000 1 960A2760EC8D866 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514
Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
Activation ID: da22eadd-46dc-4056-a287-f5041c852470
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00186-149-639295-02-1033-7601.0000-0102016
Installation ID: 001986425316033083061411071895367413981866374930874720
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: FC6KT
License status: licensed
Remaining Windows rearm count: 3
Trust time: 25/01/2016 10:58:11
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:
--> HWID data
Current HWID hash: NgAAAAEABAABAAIAAAABAAAAAwABAAEA6GGi4iOfPAyIevyQRoOYoLzXkIWCAxbA4Klv5iqF
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL M08 APIC
FACP DELL M08
HPET DELL M08
MCFG DELL M08
ASF! REFERENCE DELL M08
TCPA
M08 DELL SLIC
SSDT PmRef CpuPm
Thank you in advance for any help you can provide.
Firecracker.DWR
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
I also recommend that download you and install Service Pack 3 for Office 2003, then look for updates in the Help menu.
-
I messed up! Need to install correct windows 7 Professional!
Good evening
If my computer started acting, being a bit computer I decided to do a new install of Windows 7 Professional. I followed a tutorial that I found over at PC world who directed me to download Windows 7 Professional Service Pack 1 (thinking that it was the one I was running before - X 17-59186 file). I followed the instructions, everything went beautifully!... Well well somewhat... I got to where I had to enter my product key, but where it went horribly wrong.
Thinking I would save me some headaches, before we begin, I have copied down the product ID of system properties, I also used Magic Jelly Beans to extract my key CD and the product key before begin this process (the label of the product is quite worn on the bottom of my laptop, it has been around ", so I thought it was a bit of additional insurance and would allow me to save some problems due to not being able to read a few letters on the sticker).
So I'm going to enter the cd key and it says its invalid, I get the product key and the cd key that all tell me that they're wrong. So I jump ahead just to see if I could maybe enter it again in the system properties windows activation area. No dice. Then I re - check the magic jelly beans to connect only to realize that the file I installed was X 17-59186 and one on computer laptop X 15-39122. OK, so now that I think I can just google to find this copy of the installation ISO and create a usb one and viola installation, can I use my existing information and I'm good to go. No dice again, because nobody seems to have a digital copy of this one.
So now that I'm desperately looking for the installation disc, my computer has been cleaned with the new installation, and I have nowhere to really go but maybe buy a new copy of windows 7 (something I really don't want to do - when I already have a copy). What should I do?
Try to contact the manufacture of your PC and ask a set of "Recovery Media" which does not require the product key on the label (which I suppose is unreadable) to install and activate.
J W Stuart: http://www.pagestart.com
-
Do I have to do a clean install of Windows 7 upgrade disc?
Hello
I use a retail version upgrade of Windows 7 Professional 64 bit on a desktop PC, I've implemented myself 4 years ago. I have upgraded to Windows XP then.
I think I would buy a new card mother and CPU in another year and I hope that my current installation of Windows 7 on my hard drive (fairly recent) current will be able to start with the new MB and CPU - and just to require new drivers for chipset. However, I know that this will not work and I might have to reformat the drive and do a clean install of Windows 7. I'll be able to do it from my Windows 7 upgrade installation disc?
Unfortunately, I got rid of my old XP drive because I'm moving soon and I threw it without thinking. Do I need to reinstall Windows 7? I still have my old XP serial number and product key, and of course, my Windows 7 product key and serial number. Also, I have an old system repair disc and could make another if this will help. Thanks for your advice.
Zaid
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
Try the following:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click new
Click on apply
Click OK
Click Format, and then click next to proceed with the installation
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.
Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.
Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.
As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)
Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.
I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.
In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.
After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)
After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.
Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.
Details:
System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4
- Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
- Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported. Ran NVRAM reset before each attempt.
- At ran EtreCheck report which seemed OK.
- Verification of diagnosis ran who is childless.
A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.
In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.
Distill the results (the Boot Camp partition removed):
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage GB internal drive 121.0 disk0s2
3: disk0s3 Apple_Boot Boot OS X 134,2 MB
/ dev/disk2 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk2
1: disk2s1 NO NAME 209.7 MB EFI
2: disk2s2 Apple_CoreStorage TB 3.0 drive internal
3: disk2s4 Apple_Boot Boot OS X 134,2 MB
/ dev/disk3 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD + 3.1 TB disk3
Logical volume on disk0s2, disk2s2
7BE1F343-ACBE-4144-BF86-C838BE1E49D4
Fusion unencrypted drive
iMac - simon: ~ list of cs simon$ diskutil
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2
=========================================================
Name: Internal drive
Status: online
Dimensions: 3121237860352 B (3.1 TB)
Free space: 0 (0 B) B
|
+-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0
| ----------------------------------------------------
| Index: 1
| Disc: disk2s2
| Status: online
| Dimensions: 3000249008128 B (3.0 to)
|
+--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4
---------------------------------------------------
Disc: disk3
Status: online
Size (Total): 3106705375232 B (3.1 TB)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
Summary:
Q1: Should it take 4 + hours to install Windows 10 via BCA?
Q2: Al must ultimately be so slow when initially W10 desktop?
Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?
Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?
Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?
Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?
Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?
Details:
Day 5. Attempt at 6.
Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.
4 1/2 hours from start of Windows 10 initial signature window.
Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.
In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.
Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.
Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...
He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.
I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.
Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.
I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.
Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.
I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.
For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.
-
HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1
Hello
After a clean install of windows 8.1 the audio beats does not open.
It appears in the control, but when I click on it nothing happens.
I have sound, and everything seems to work ok, but I'm curious to know what happened.
When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.
I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.
Any help would be appreciated
Hello
Download and reinstall the Realtek HD Audio software at the following link.
http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe
When the installation is complete, restart the laptop.
Kind regards
DP - K
-
Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you
This can help (from turingtest2):
-
Clean install of Windows 7 on Satellite L655
I have a Satellite L655 and replace the HDD with a SSD (2 sheets) system (more small capacity, 1 partition). I also want to do a clean install of Windows 7.
I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.
> I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.
What exactly do you want: clean windows installation or by using the disk Toshiba recover?
I mean own installation only the Windows operating system using the Microsoft Win 7 disc.
This installation requires a valid serial key.But using the Toshiba recovery disc requires no any key since the BONES of the window is already enabled on this drive.
Maybe you are looking for
-
No cost to get fixed 9.3 update iPad?
Does anyone know if there is a repair cost to hold an iPad 2 Apple store for them to get no masoned of this last update that apple shut down?
-
Windows phone call native screen, a button video Skype, but grayed out, why?
During a normal GSM call, I have a greyed the button with a Skype video icon. For one of my contacts, this button become active and when you click it, wonder if I want to convert a video call. Why it is disabled for most of my other contacts, what is
-
Defective print heads reported
Hello My Officejet 8000 A809 has print runs streaky - the black cartridge seems to be the problem. I ran the print head cleaning utility and it showed the black print printhead correctly but when I tried to print a document it printer reported that c
-
installation of upgrade to itunes says error: problem with the Windows Installer Package
Hi, I'm unable to load the latest version of itunes, the error message says that there is a problem with the installation of window and the staff package to contact technical support or the vendor of the package. Can offer you any advice? Thank you
-
When I want to send a document from WordPad - I find the 'send e-mail', get the Microsoft e-mail format (the document is located in the "Home" part). I type the e-mail address, click on 'Send'... and it is NEVER RECEIVED by the person that I sent him