Clean install on laptop 2008

Similar Questions

• R050sa flow 11: Activation fails after a clean install on laptop pre-installed Windows 10

  I just bought a HP notebook 11 r050sa stream with Windows preinstalled Home 10, but could not start when it opened its doors to the top (circle kept spinning turn for hours).

  As I was intending to do a clean install anyway, to remove any HP bloatware, I decided to delete all partitions and perform a new installation from a USB key using the official Microsoft Media creation tool for Windows 10 Home https://www.microsoft.com/en-gb/software-download/windows10.

  Installation went well but the activation failed indicating that I have "do not have a digital right.

  How is this possible, since the PC came with Windows preinstalled 10? How can I get my license back?

  There was a surprising new twist in this question, should I report it here in case someone else is in the same situation.

  When I received the activation failed I reported to my original request, I had done the installation using the edition entitled 'Windows 10 unilingual homepage' (see figure below), which seemed to me the only option if I wanted to install "Windows 10 home" which is preinstalled on my laptop.

  Yesterday I did a last attempt at creating USB installation after selecting 'Windows 10' (see figure below). Yet once, I removed all partitions on disk and performed a completely clean install on my HP notebook 11 r050sa flow.

  The result is that, in the end installation smoothly, I found my computer with installed "Windows 10 Home" and fully active, without the need to insert an activation key of windows, with all the drivers installed automatically by Windows and without any HP bloatware!

  I'm puzzled by the outcome, but happy...

  

• Missing network drivers after cleaning installed drive

  The title pretty much describes the situation.   Hard drive failure and clean install

  Laptop... HP2000369WM... windows7 64 bit

  Here is the hardware identification numbers:

  Ethernet: PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Please advise!

  Network: PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00

  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C

  PCI\VEN_1814 & DEV_5390 & CC_028000

  PCI\VEN_1814 & DEV_5390 & CC_0280

  PCI: PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C

  PCI\VEN_10EC & DEV_5209 & CC_FF0000

  PCI\VEN_10EC & DEV_5209 & CC_FF00

  Hello:

  Here are links to the drivers you need:

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93650-1&cc=us&DLC=en&LC=en&OS=4063&product=5171087&sw_lang=

  Network:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111718-1&cc=us&DLC=en&LC=en&OS=4063&product=5171087&sw_lang=

  PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93202-1&cc=us&DLC=en&LC=en&OS=4063&product=5171087&sw_lang=

• Laptop HP 15-f111dx: 10 windows clean install

  My laptop came originally with 8.1 Windows preinstalled (purchased in 2014). Last year, I did the free update for Windows 10. I also did the original OS HP Recovery disks for the supplied Win 8.1 system with my laptop, and I did the 10 Windows upgrade USB recovery.

  My question: I plan to do a Windows 10 'clean install' because I don't think I necessarily need ALL the pre-installed software HP initially installed on my computer, which of course remained after I did the upgrade to win 10. However, my question is if I do a clean install, I'm aware that NONE of the software original HP and drivers (including the HP Support Assistant who helps with updates software/driver) would be installed.

  I have concerns not to get the updated drivers if I did a clean install.  I assume that there is no possible way to later install SOME of the software that came with my original installation, as the DVD burning software (CyberLink), Foxit Phantom PDF program, etc.

  Can someone shed some light on this topic, especially if you did a clean install of win 10? Thank you.

  Hey there @jrobbie82.

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP's Support and I understand that you are wanting to do a clean install of Windows 10.

  You said "my question: I plan to do a"clean install"Windows 10 as I don't think I necessarily need ALL the preloaded software HP initially installed on my computer, which of course remained after I did the upgrade to win 10. However, my question is if I do a clean install, I am aware that NONE of the drivers (including the HP Support Assistant who helps with software/driver updates) and software original HP would be installed".

  Here's what I found for you. The rest is up to your own discretion:

  Here is a link to the HP Support Assistant.

  This is your page HP for laptop - 15-f111dx (ENERGY STAR) software and driver downloads . You will see that there are 10 for Windows downloads:

  • CyberLink Youcam software
  • Software from CyberLink PhotoDirector
  • CyberLink PowerDirector software
  • Media Player CyberLink Power

  More drivers for:

  • Driver Audio Realtek High definition (HD)
  • AMD graphics driver high definition (HD)
  • Synaptics Touchpad Driver
  • ALPS Touchpad Driver
  • Wireless 802.11b/g/n Realtek RTL8723BE/RTL8188EE LAN drivers
  • Realtek RTL8723BE driver Bluetooth
  • Realtek LAN driver (LAN)
  • Realtek card reader driver
  • Updated HP Notebook System BIOS (AMD processors)

  And Firmware for:

  • The Hitachi hard drive Firmware update

  Here is some information for you to read before hand:

  "To verify that you have an authentic copy of Windows 10 which has not been used on more devices, the license agreement calls for, your 10 Windows must be enabled. Depending on where you purchased your copy of Windows 10, activation occurs using a digital entitlement or a 25-character product key.

  See HP support document Windows 10 Product Activation for more information on activation of Windows 10. »

  Source: installation of Windows 10

  Please read the documentation completely.

  I hope that this has answered your questions and gives you the information that you were looking for. If so, please share it with others by marking the post appropriate as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  Thank you!

  Have a wonderful day!

• Laptop HP 15-R204NE: clean install of Windows 10

  Hello

  I'm ready to do a clean install of Windows 10 but the only thing that worried me are the drivers provided factory installed with my laptop, it was initially delivered with Windows 64 - bit of 8.1. I don't want to lose one that I have no idea how or where I'm going to do if I lose everything. If someone has a way to understand this help is very much appreciated.

  Kind regards.

  Hello Zarakkhan ;
  
  I read your post on the new install of drivers of Win10 and wanted to help.

  As to the first, the upgrade of active Win10 through something known as right digital, install some sense, when you perform an upgrade on the spot on an existing Win7/8/8.1, upgrade reuses the existing product key for activation.  After you confirm that the machine is turned on, you can THEN do a clean install on the same machine.  IF you do a clean install without activating the first, you will not activate your copy of Win10.

  That said, MS released earlier to a new update to Win10 and (allegedly), you should be able to do a clean install with NEW media made from multimedia authoring tool and have it activate using your product key of Win8.1.  But, I haven't read anyone done this yet, is just a rumor at this point.

  As for save the drivers, there's a product excellent freeware called Driver Backup.  After you download and install it, you can then save out all your current drivers on a USB key.  This will make reinstall them later a simple process. I know it works because I use this product myself.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Envy TS m7 Ntbk E0K99UA #ABL: HP Envy laptop Windows 10, clean install and reinstall applications preinstalled

  Hello

  8.1 Windows, I've just updated my HP Envy laptop to Windows 10. I now have a Windows 10 product key (that I found using the Microsoft tool productkey. The update went well. All the drivers have worked. The question isn't here.

  I have to do a clean reinstall of the laptop. Too much shit...

  I know how Windows 10, but I don't know how I'll be able to reinstall the app pre-loaded, he came with the laptop.

  Firstly, Windows 10 kind of RecoveryMgr blocked... I just can't access more...

  If I boot with the drive D or the backup media, I created, I'm only given the opportunity to reinstall completely (but, of course, for Windows 8).

  Two questions:

  1. from the D drive or my backup media, is there a way to separately select application to install? (Everything seems compressed and it allows me to start the installation of each software program.

  2-if I reinstall Windows 8 using backup media, I created (or d reader app), I'll have my own installation... but I'll be able to re-update to Windows 10? (remember, I now have a product key...).

  Thank you.

  Sébastien

  Your best option would be to use the recovery media to reinstall the original OS. Since you have an activation key of license for the original operating system meets the requirement to update Windows 10.

  Once you have done this, you can use the key to creation of Windows Media to create a bootable installation flash drive or to proceed directly to Windows 10.

  Windows 10 installation as an upgrade has the advantage of you to have the applications installed at the origin of the original OS present and ready to use in your new installation of Windows 10.

  Otherwise with a clean install of Windows 10, the HP Recovery Manager wil do not exist, or you can install it separately.

• 2 different error messages to clean install win 7 on laptop 2 x 61 attempts

  2 different error messages for win 7 clean install the 2 attempts on my x 61 laptop

  I bought an oem windows 7 dvd disc installation. I tried to install once and got this error message: Windows cannot install required files. The file may be corrupted or missing. "Make sure all files required for installation are available, and restart the installation of the" error code 0 x 80070570

  The second time I tried, when I tried to install windows 7 via a dvd player external rom this message appeared. "Press any key to boot from cd or dvd".

  BOOTMGR is missing

  Press Ctrl + Alt + Delete to restart. »

  the second error message did not work, even if I did cntrl alt del. Any suggestion. It is a computer laptop thinkpad x 61.

  Have you pressed a key after this part of the 2nd message: "press any key to boot from cd or dvd"?

  If you haven't done so already, it's trying to boot from the hard drive, and that's why you're the "BOOTMGR is missing" part of the message.

  Z.

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929 

• Vista is unable to clean install on Gateway Laptop

  Midway through the installation process, the error message says that it cannot find the files needed.

  Disc is clean, no scratches and has been used before for a clean install of Vista successfully.  using the external DVD drive.

  created the startup key file on the USB stick 4 GB transfer - always get error even come on the attempt to clean install.

  problem with the system is that .msi place all the files in the installation program and disappeared.  Impossible to uninstall or reinstall any microsoft office 2007 or live broadcasts.   all the icons disappeared, and same MS security essentials cannot uninstall or reinstall.  found settings changed to exclude an external drive and erase all programming suspicious without telling me.

  a restore during initial problems just made it worse and had to wipe the external drive.

  must be able to clean installation of Vista, but the installer is apparently what is messed up.

  Help?

  is OS provided with the machine and disk drive recovery gateway... but all the vista.  It DOES NOT install any other gateway programs included on laptop, and purely a vista installation DVD.

  and used the front disc to install, w/no of problems.  error message indicates the installation is unable to locate the files needed and made it to halfway through step 2.  said to check the 'vista compatibility.  who do not know because machine has run vista since its birth.

  Gateway tries just to sell time tech and renovation... Please no more links.  KNOW that gateway to acer and almost and no longer in the game.  don't care... always the problem of microsoft, and IF they are not concerned with a copy validates their OS prevented install... so guess that means we should start writing our own OS programs!

  Your license of Vista is an OEM license.

  ANY support for your license of Vista OEM comes from the manufacturer of your computer, NOT from Microsoft.

  And it's not Microsoft.
  These are public Forums, hosted by Microsoft.

  We are colleagues help Vista users to give FREE in our own SPARE time.

  I repeat my advice.
  It's you if you want to use, or not:

  http://support.gateway.com/support/default.aspx

  For any problem with gateway recovery software/process, contact Gateway.

  Mick Murphy - Microsoft partner

• A clean install of Windows 7 - do not accept keys of the laptop

  I had an older laptop and the hard drive had a mechanical failure.

  I bought and installed a new hard drive and clean installed Windows 7 as downloaded from the Microsoft Web site. The computer is old enough that the manufacturer offers more support for recovery. I installed Windows and I used the key from the sticker on the laptop, and it seemed to accept it.

  However after that I'm getting now pop up windows saying the key is not valid, and I (now) 19 days left to resolve the situation.

  I can't afford to buy a new Windows key - what am I supposed to do?

  The only available ISO images * for the general public * to Windows 7 directly from Microsoft would need to enter your product key to make sure that you download the correct edition.

  I would try to change your product key via the given method, just to be sure and have someone else read the product key for you when you enter.

• Clean install windows 7 on my laptop EasyNote LM85 error "starting windows."

  Original title: installation of windows 7.

  I try to clean install windows 7 on my laptop than easynote LM85 DVD or USB, but it won't go beyond the screen when he say "s windows startup".

  After that appears a few seconds later, my computer restarts automatically and start again, I cannot access the menu facility

  help please I have had this problem for weeks the only OS it install me is winxp pro

  Hi Aurélien,.

  Thanks for the reply.

  Did you run the assistance of upgrade of Windows 8 on your computer?

  Upgrade Wizard: FAQ

  http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ

  Let us know the result of the upgrade wizard.

• Why can't I do a clean install on my Dell laptop?

  I bought a Dell Inspiron 17R laptop SE 7720 computer a few months ago. I would like to do a clean install with the installation disc that Dell sent me for the computer. But, when I try to install Windows 7 the DART player does not appear in the select drive window to install. The window is empty. I put the driver CD that was sent with the disc of Windows 7 Instillation. And it says drivers not found. I installed systems before, but I've never run it before. Hope that it helps. Maybe someone else has gone through this.

  When you install Windows, the installation disc normally contains the drivers required to run your disk controllers HARD is connected to, and as such, you will see the HARD drive and be able to create partitions, etc as and install.

  If for any reason, the controller drivers are not on the installation disc, you will not see the HARD drive and have nothing to the partition. This lack of a good pilots can occur if the controller is a RAID card or the motherboard controller manages the RAID functionality and installation disc doesn't know about them.

  Normally drives OEM must contain all the drivers for your specific hardware, so maybe you have the wrong disc or the disc has not been good...

  To work around this problem, when Windows Installer boots drive upward, you always get an option to press F6 and then load the appropriate drivers for the controller used (for the motherboard or raid card).

  Not knowing your laptop card mother, I assume you have a chipset intel AHCI + RAID features. You can check this by starting at the current operating system and looking at the Device Manager where you should see "Standard dual channel PCI IDE Controller" or "Intel Desktop/Workstation/Server Express Chipset STAT RAID Controller". If you see the later, you must find the Dell IRST driver and download it. Yes, you have TSRI and this driver should be correct.

  After downloading, run the executable that should create directories, to not proceed with the installation. Check to see if there is a Readme in the directory created and/or an F6 disk (or something similar) directory. Read the "readme." If there is a floppy F6 directory, place this directory on a USB key and when you start windows installation disc, press F6 and insert the stcik USB into the laptop and go to the F6 floppy disk to the USB directory by selecting the appropriate drivers. Windows Installer should then continue and you should see your HARD drive.

  Once you have installed Windows, make another trip to the dell laptop driver page and update all the relevant drivers to the most recent available

  I hope this helps...

• After a clean install on pre-installed 0xC004F063 HP laptop

  Hello

  I just did a clean install of Windows 7 on a new HP laptop.

  I get an error saying that "this copy of Windows is not genuine" Windows build 7601

  Output of the diagnoses of Genuine Advantage tool

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 788W3 - H689G-6P6GT
  The Windows Product Key hash: yr8OHoeXhbT4dc6MxGYjdAStSPY =
  Windows product ID: 00371-OEM-8992671-00008
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {1767CDCD-6AF2-4A77-95D8-92AC4D3E7F7B} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_rtm.101119 - 1850
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: proxy.bru - hub.dhl.com:3128
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {1767CDCD-6AF2-4A77-95D8-92AC4D3E7F7B}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-6P6GT2S-1-5-21-104012550-2515854202-3511102870Hewlett-PackardHP EliteBook 8570 pHP68ICF worm00371-OEM-8992671-00008. F.4320130716000000.000000 + 000F9E93307018400FE08130409Romance Standard Time(GMT+01:00)03HPQOEMSLIC-MPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700008-02-2067-7601.0000-2392013
  Installation ID: 002061444072519531802003141404764644236562746813515326
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 6P6GT
  License status: Notification
  Notification reason: 0xC004F063.
  Remaining Windows rearm count: 3
  Trust time: 27/08/2013-20:19:48

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAEAAgABAAEAAAACAAAAAwABAAEAln3YMNpxHC8OMRDAPABeRfxFXmUCK2wQlmM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC HPQOEM 17A 7
  FACP HPQOEM 17A 7
  HPET HPQOEM 17A 7
  MCFG HPQOEM 17A 7
  TCPA HPQOEM 17A 7
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SLIC SLIC-MPC HPQOEM
  FPDT HPQOEM 17A 7
  ADELINE HPQOEM 17A 7
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  ASF!            HPQOEM 17A 7

  Look in the compartment of the COA.

  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• HDMI issues after a clean install of Windows 7 on laptop HP 2000-2c29WM

  My mother bought a laptop of HP 2000-2c29WM of Wal-Mart with 64-bit Windows 8 is installed. They asked me to install Windows 7 on it, so I did a clean install and have all the drivers available for the PC and the Device Manager indicates that all the drivers are correctly installed and up-to-date. All updates have been applied and everything, except HDMI and VGA ports are working properly. Please help because I am at a loss to know how to solve this problem. I am including the PC model number and product as well as the operating system it is running. Any help or advice would be greatly appreciated! Thank you!

  Hello:

  Have you installed the driver amd chipset and graphics driver amd?

  First install the amd chipset driver and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then, download and install the graphics driver AMD Mobility Catalyst beta from the link below.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

• Can I use my Win 7 Upgrade disk to do a clean install on my desktop that my old laptop has now been destroyed. ?

  Ok.. I bought a laptop with Vista pre installed Sony.

  Then, I bought a copy of Win 7 Upgrade to upgrade, I did.
  Shortly after, my laptop broke and I got a new laptop through my insurance company which had Win 7 pre installed. I just got a new desktop PC and was wondering if I could use my Win 7 Upgrade disk to do a clean install on my desktop that my old laptop has now been destroyed. ?

  As long as the original computer disappeared, I think you can use the upgrade on another computer...