Clean upgrade, how?

Similar Questions

• I have Adobe Acrobat XI pro, and I get a screen everytime I open a pdf file, asking me to upgrade to DC or this software license. I don't want to upgrade, how can I get rid of the pop up?

  I have Adobe Acrobat XI pro, and I get a screen everytime I open a pdf file, asking me to upgrade to DC or this software license. I don't want to upgrade, how can I get rid of the pop up?

  Click on software under license and enter your serial number when prompted.

• The HD on Thinkpad T430 upgrade, how can I find a compatible drive? Looking for 1 TB 7200 RPM

  Hi, I recently got a T430 renovated and well, I just love and want to invest in an upgrade to 1 TB hard drive 7200 RPM

  I read the specs here but other than:

  • High, 320 GB, 7200 RPM, SATA 3.0 GB/s 7mm
  • 500 GB, 7200 RPM, 7mm or 9.5 mm high SATA 3.0 GB/s
  • 1 TB, 5400 RPM, 9.5 mm high SATA 3.0 GB/s

  It is really not a lot to spend when buying a new hard drive. (totall rookie at this, so please be nice)

  Are all HDDs OTC market you today my machine? I have read discussions on the Bay in my entirely appropriate machine HDs 7 mm and 9.5 is a stretch and could adversely affect the connection to the motherboard. You can link me to a schematic page? I am looking for part numbers, which would help.

  Here are some HDs I consider, how do I know if they will fit ok? Comments are appreciated. I can watch videos on gootube how swap, this part is easy.

  Currently dual boot win 7 pro and ubuntu 14.04 and I've pretty much mukked to the top of the 320 hd with partitions before I knew any better. Nothing on the drive is special, I might as well do a clean install or restore backups. Which do you recommend?

  I would replace the hd in 9.5 mm slot?

  PS, none of the disks hybrid work in the T430?

  Thank you!

  Good day and welcome to the community.

  For reference, take a look at the FRU T430 parts list: https://download.lenovo.com/parts/ThinkPad/t430_t430i_fru_bom_20140722.pdf

  There is a section for each: 7 mm/2.5 "" SSD and 7 & 9.5mm/2.5 ' hard drives, which were offered with the machine. "

  Hope this helps your search a little.

  Kind regards.

• X 200 Vista to Windows 7 clean Upgrade - Software License concern vs

  I bought a X 200 with Vista (before the free update) and now bought the Windows 7 upgrade software.  Most of the forums tech recommends a clean install instead of upgrade.  Should I worry if the software I have purchased (for example MS Office, Acrobat 9, etc.) he will have to buy another license?  Alternatively, it "will recognize" my PC if I copy down product keys?

  Hello

  Most of the software still lack activation so there, it comes to have the serial number and the corresponding Installer/CD recorded.

  With Adobe software that uses the activation, you can disable the software before the upgrade and then reactivate after.

  I don't know how sensitive MS Office is. My experience with a system that I helped to recover was that Office reactivated automatically on the same machine. I guess that even if you activate by phone there should be no problem that you reinstall on the same machine.

  Carpet

• I've updated as much as my computer will go, but it is still asking me to upgrade, how to stop?

  I have a MAC and you cannot upgrade the operating system. Firefox keeps asking me to upgrade and I can't. How can I stop it asking me every time I go to another page? Even with google and gmail. I can't be upgraded more. How can I stop it asks all the time?

  Thank you all for all the help, but after trying all the suggestions, the conclusion, more or less a solution is not to use Firefox more! Nothing get rid if the real question Yes, sorry but good bye Firefox! Thank you all...

• Pavilion p6120sc: Vista to Windows 7 upgrade: how to find the necessary drivers, etc.

  Cheap HP Experts, the Vista operating system in my Pavilion p6120sc must be upgraded to Windows 7. The compatibility test of Microsoft said that the current driver for my NVIDIA nForce 10/100 Mbps Ethernet is not valid in Windows 7. Therefore, I was advised to download the latest driver for this device in advance; but its installation should only be performed after the installation of Windows 7.

  Problem 1: what is the right driver for NVIDIA nForce 10/100 Mbps Ethernet (i.e., valid in Windows 7), and where can I download safely to (without viruses etc.)?  -J' did an extensive search on Google but couldn't find an answer I could understand.

  Problem 2: The compatibility test also advised me to Uninstall Hardvarudiagnostikverktyg version 5.1.5144.16 (PC-Doctor, Inc.) before upgrading the computer to Windows 7. However, I couldn't find such a program in my PC! Therefore, How can I uninstall it properly? (Is this program might somehow hidden in the HP service package that performs the Test of full operation of my PC once a month? Moreover, would the HP package function test no more if this particular program have been eliminated?)

  You are the very welcome.

  You must install this driver before chipset update to W7, if you do an upgrade "in place", because the driver is good for W7 and Vista.

  If you make an own (custom) upgrade (not to keep all programs, files or settings), then you must install this driver after you upgrade to W7.

  All this driver will do is update the drivers for the motherboard and ethernet (the devices listed in the driver file page).

  Driver Ethernet (v73.14 +) tools for network management (v73.16) "Sedona" SATA IDE Driver (v11.1.0.33) WHQL SATA RAID Driver (v11.1.0.33) WHQL RAIDTOOL Application (v11.1.0.30) pilot SMBUS (v4.74) WHQL SMU (v1.71) driver driver WHQL of GPU (v190.38) Physx (v9.09.0428) WHQL Away Mode Driver (v6.0.6000.114) WHQL Installer (v7.57) WHQL.

  It shouldn't cause any device to stop working.

• Satellite C50-B-14F - RAM upgrade - how?

  Hello

  I would like to add (+ 4 GB) memory RAM for my Satellite C50-B-14F.

  But there is no instruction on this topic in the user s guide.
  At the present time, there is a memory of 4 GB (software Speccy says that there is a 4.00 GB single channel DDR3 @ 797 MHz (11-11-11-28) RAM inside my pc), and I want to go up to 8.
  I could learn how to choose it is good?

  Thank you in advance.

  Because of the design of computers laptop specific upgrade user RAM is not supported, and this is the reason why you found nothing in the document of the user manuals.
  Slots of RAM are placed under the hood, and if you want to have full access to the RAM modules, you must remove the lower cover.
  Problem is that if you do it on your own this will void your warranty, it should be the dome by authorized service provider.

  In my opinion, you should contact Toshiba service nearest and ask for help. I mean this is not so problematic, and I think that it cannot be so expensive.

  Theoretical, you can do it alone, but you should think about valid warranty.

• Windows upgrade how do I know its Microsoft account

  Sometimes I get emails that say they just upgrade Windows - Microsoft, how do I know that they are really from Microsoft, they ask for my password and other details. I'm worried about scammers

  As stipulated in any sort of contract, a company never asks personally identifiable information such as billing, location and most especially to one of your accounts. It's clearly a scam and you would like to report it to the FBI and FTC, which are the two agencies to send suspicious e-mails that you think that you may be fraud or a few threats to security in general. Here is a site that clearly explains the fraud by email and how to report according to your geographical location: http://www.consumerfraudreporting.org/reporting.php

• I'm trying to download Security Suite from my provider and I get a message that I have to get rid of PC Cleaner. How can I remove it?

  Get rid of PC Cleaner

  I'm trying to download Security Suite from my provider and I get a message that I have to get rid of PC Cleaner. I searched my PC and that you do not find PC Cleaner. If I don't know how I'll remove it. Thanks for your help. The only reference to PC Cleaner is the Microsoft Security on the PC.

  Go to add/remove programs and see if PC Cleaner is in the list. If so, then click to remove.
  Then go into Windows Explorer. Research on Windows/System32 and see fi there is pcsd.dll and delete it.
  Then go to regedit and search for any mention of PC Cleaner, PC Cleaner and remove these entries.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Then see if you still get an error of PC Cleaner.

  Let us know if that helps.

  Marilyn

• Dashboard houses alarms double after upgrade - how to remove a?

  After our upgrade to 6.6.1 we found that we have now 2 instances of the "Alarms" Dashboard under the 'houses' list in the left pane of the vFog. I can't find a way to remove one of them because we need one. Anyone know how?

  

  Hi Nel,

  Could you please try as below:

  Click on the dashboard of the alarms 1-> open the right action-> Sub panel general tab see if you s it y an option "make this my homepage.

  If so, click on "make this my homepage".

  See if the options of 2nd alarms disappears from the list.

  If you don't see the option 'Make my homepage' on the dashboard 1 alarms, try the 2nd dashboard alarms & follow the steps above.

  Later, you go to what is your current home page.

  Disconnect & reconnect (just to double check that replication has disappeared from the list of houses)

  I hope this helps!

  Kind regards

  Rachel

• App Error 200 on upgrade - how to diagnose?

  Hello

  I have a request, I recently published and periodically create updates. I create several versions using the directives of preprocessor for several operating systems, but a version causes a "App Error 200" when replacing the old version of the application during the OTA Download, and the phone is restarted. Only occurs with OS 4.6 build and the build works correctly if its installed without a previous version.

  How can I start to diagnose a problem?

  Thank you

  It turns out that it wasn't a problem to upgrade, but the necessary phone BONE re - install.

  JavaLoader - usb eventlog provided information that someone may find useful when debugging their applications with phone errors

• Invalid key clean upgrade following the installation of Windows 7

  Hello

  My PC came up with an OEM of Windows 7 Home Premium version.  Later, I upgraded to Windows 7 Professional by using the Express Upgrade option.
  All was well in the world until my PC suffered a bit of a meltdown and I was forced to make repairs and restore it to its factory default condition.  Of course, the original version of Home Premium OEM has been reinstalled.
  Now, when I try once again, upgrade to Windows 7 Professional, using the product key, I had already received after the purchase of the upgrade of Microsoft, I got the error: the upgrade key is not valid.
  There is a chance that I could have written the wrong key, but I don't think that this is the case.  Also, I threw down the product ID of my version of Windows 7 Professional, installed before resetting in the case which is of no use.
  Thanks for your help!

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• The LR5 LR6 to upgrade: how to import my LR5 catalog/keywords?

  The LR5 LR6 to upgrade

  How to import my keywords LR5 and catalog?

  David

  Ithaca, NY USA

  When you first launch LR6, it should automatically detect your catalog LR5 and asks if you want to open an improved copy of it.

  All of your changes, keywords, etc. will be deferred.

  If it doesn't, use file > open in LR6, orders and access the LR5 catalog.

• Acrobat Standard XI to DC Pro upgrade (how / cost)?

  I bought a ScanSnap scanner that came with a copy of Acrobat Standard XI.  If I want to 'upgrade' which in DC Pro, how would I go about this, and how much would it cost?

  I guess less than a copy complete DC Pro ($450)?  I want to buy outright, months no monthly rental.  I can't find 'upgrade' price anywhere on the page 'plans and prices.

  Thank you.

  Plans and prices. Adobe Acrobat DC

• project settings for an old video PE10 passed to 1080i 1080 p by ss14 upgrade how to fix?

  Hello

  Today, I tried to resurrect a video that I have almost completed a year or two ago. Only a few pieces were left to do, but waiting for a single element of a 3rd party (a logo) meant that he got unfinished at that time. Initially, I used 10 elements and parameters of the project were 1080 p/25 fps.

  Since then, I've updated my graphics card. Pe10 will be no longer work with this card (PE10 is too old to understand the map I think) so finally got upgrade to ss14 having had a bit of respite from the edition since the evolution of this card and PE10 has stopped working.

  Project say 1080i settings (which I have never used - I shoot a SLR!) and it appears so there is no way to change this without redo any changes in a new project...!

  I tried to do, but create a new project with fps 1080p25 settings, I noticed a 2nd number. Try to place the 2nd clip on 6s20frames in the project turned into 7s0frames. That is to say the timecode had begun to count to 20 fps not 25 frames per second!

  I really don't understand what is causing ss14 causes these hassle with images/changes that worked wonderfully in PE10. But for the moment it seems unusable

  Can someone help me

  (a) change the project settings back to 1080 p/25 fps on the original project? (really the most important thing - although I suspect that the answers don't)

  (b) offers clues why a project which runs at 25 fps stupid plays * with time code and how to change it so that it displays the correct value of 25 fps?

  Thanks in advance for any help

  Pictures of crete

  Thanks for the reply and happy you have managed to create a scenario where the final result was acceptable.

  Here is an assortment of information you put together impact the kind of thing you are trying to do.

  1. first installation items included 10 a dialogue so that the user could designate TV NTSC or PAL TV profile. After installation, configure your respectively have the default the Standard NTSC or PAL DV Standard DV project preset. Unless you have changed this setting in the new project dialog box, when you open a project, it would be your project setting if it was OK for your video. In some versions, the project could send a message to want to change it to you with an answer Yes or no to you.

  2. you can't change the preset project when it was established. If the project preset is incorrect for the imported video, you start a new project.

  (but, in certain circumstances, there is a way to change the project first Elements 10 settings by editing the document in Notepad of the saved closed project - but that's another story).

  3. When you get to first items 11, 12/12.1, 13/13.1 and 14, other factors enter the picture. Programs are designed so that the the project preset is set automatically based on his analysis of the first file dragged to the timeline of this new project. If the project cannot analyze the video, the project does not give you the closest possible project settings. Instead it gives you, it by default which is HD1080i30 full of AVCHD NTSC or PAL AVCHD Full HD 1080i25. You don't see a new project dialog box, unless you decide to upgrade the predefined project manually via the file Menu/New/Project.

  4. and, to add to all of this, even if you're in a PAL area and despite your installation for the country and language settings, always have the default value of NTSC AVCHD Full HD 1080i30.

  But, in your case, we are not talking about setting up a project, it is a project of opening a version earlier than the last.

  Of immediate relevance for you now is transfer of project and its media to source from one computer to the other. When you import media into a project, all you get are copies of the originals who remain in their drive hard saving location. But copies of the project must go back to the original to the place where they were when they were first imported in the project. That's when the option to Menu file/archive/copy the project shines to give you a folder that contains the project file and all his possessions. This file can be transferred to a USB key for the folder on the computer 2. Another "Beware of '... If you store the source on an external drive support and move the hard disk from one computer to another, make sure that the drive letter of the external hard drive is the same on both computers.

  Please consider.

  Best wishes with your Premiere Elements project.

  RTA