Clear cache with vista

Similar Questions

• Clear cache update vista

  I went through the process of removing the "cache update', but get a message that says"the system cannot find the specified path"it is somehow prevent the delete operation. How can I get more of this obstacle?

  What measures are you going through to delete "Update cache"?   Why you want to delete this item?  You get an error message any?

  http://www.windowsvistahelpnow.com/Windows-Vista-Help/Windows-Vista-Help-for-deleting-the-Vista-update-cache/

• Clear the cache with graphic flash

  Hi all
  
  On a menu, I have a graphic flash with a link to goto page xx
  The url in the link have the clear cache attributes defined for the same page xx.
  
  on the same page of the menu, I also provide a list with an option for even goto page xx
  f? p = 103:2:815028013919804:NO:2:
  
  
  Now the question
  When you use the menu list of the cache is disabled
  When you use the graphic flash cache is not authorized!
  
  Some body have an idea how it works?
  
  Hugo Perfors

  I think that it is a problem of IE. Try to change the caching there options to see if it happens after that. I think that if you are using FF it won't happen.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• 'remove all cookies', cleared CACHE & CONNECTIONS ACTIVE, and yet I "don't need to log in Facebook!

  I deleted all cookies,
  Cleared CACHE, ACTIVE CONNECTIONS and DATA from the WEB site offline
  Yet I "is no need to log in to Facebook.

  It was that I always needed to log in to Facebook after you delete all the cookies.

  alscotch said

  I killed Firefox (something I do frequently, followed by SESSION RESTORE) so, no, I never left the GAME. But if THAT is not automatically connect u - this will be?

  The history of session file stores session cookies. If cookies for HTTPS sites are available depend on your settings and if Firefox through a clean shutdown.

  Assuming that Firefox normally stops:

  • If you have Firefox configured to start with your windows and tabs from your previous session, cookies for HTTPS sites are stored in the file. This provides the most seamless experience.
  • If you have configured to start with a blank tab or the Firefox homepage, cookies for HTTPS sites are removed from the file. Because you will not necessarily restore perfect, it offers greater security.

  But in an accident, there is no cleaning of the judgment.

  To block Firefox to save cookies to HTTPS sites in the historic session file, you can try to change a setting here (I say try because that in an accident scenario, you still may be these cookies in the file, I have not tested):

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste sess and make a pause so that the list is filtered

  (3) double-click the preference browser.sessionstore.privacy_level and change from 0 to 1 (zero records HTTP and HTTPS, 1 saves only the HTTP protocol when you close Firefox).

• Tecra A9 came with Vista and XP, the disks - but can not activate XP

  Hello

  I have a Tecra A9, it came with Vista Business pre-installed and on a recovery disk. It also came with a XP Recovery disk.

  Part of the documentation in the box suggests that I should be able to simply install XP from the recovery disc. I tried this, but I can't activate XP. I called the number of Microsoft on the activation screens and entered all the numbers, but I then told me that there is an error and I should change my product key.

  My laptop on a a Vista product key stuck on the bottom. So, I seems to be a little stuck.

  The sheet that was in the box says:

  "it's additionall equipped with a Windows XP Professional Recovery DVD - ROM that allows you to easily install this operating system on your own. To do this, follow the instructions on the packaging of the DVD of restoration"

  Usefully, there is no instructions on the packaging of recovery DVDs, I expected maybe a XP product key or something... But clearly not.

  How should I proceed?

  Thank you

  Hello

  Sorry, but I'm a little confused. As much as I know Toshiba recovery image should not be enabled and if you please be so kind and explains what exactly happens when you try to use recovery media?

  On what stage you must enter the product key?

• Network stops working in Tecra M9 with Vista OS?

  We have four Toshiba tecra M9 (processor T7500 2.2 ghz) laptop computers with installed in the factory version of Microsoft windows vista business and the other with toshiba charges not install Vista Ultimate version. All of these laptops have the exact same problem.

  Network sometimes stops working and nothing but allows you to restart the computer?
  Thing is that generally you cannot restart the computer event because it crashes of disconnection or closure of State.

  Theres just no clear reason for this one and it happens now and then.
  Sometimes several times a day and sometimes it works for days. No matter whether you are connected or not anchored. We have several workstations, PC and other laptops of brand with exactly same configuration/programs and no problem.

  Any help would be great because users are not very happy with this situation and we do not want to go back to windows XP (which works without problem in M9).

  Hmm. very interesting Question. Have you tried to update the BIOS?
  How about the latest Vista patches and fixes?

  I read that there are many bugs with Vista OS and Microsoft releases slowly unique fixed so I think you should check out these opportunities!

  Good luck

• Equium L350D with Vista won't mode 'sleep'

  Equium L350D with Vista will not 'sleep' in the mode I just reinstalled windows and sleep worked but now the screen just goes but its clearly not on 5000mAh
  Help, please

  > I figured it
  Can you please tell us how?

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  Bruce,

  Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?

  If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.

  You need to reinstall Vista from your original media to recover your system if this is the case.

  Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.

  Sorry to be the bearer of bad new possible.

  Rich

• I need an email client with distinct identities that are compatible with Vista.

  I could not upgrade to Vista XP, because I need an e-mail with a SEPARATE identity client.

  Now 7 will come out tomorrow and no solution in sight.

  I see dozens of customers and have seven POP separate accounts on my PC, directly related to different customers.

  It is essential to maintain a complete separation between the e-mail accounts. Often the transmissions are delicate or confidential.

  I tried to use Windows Mail, as a test on a second PC, but there is no way to maintain a clear distinction and separation between email accounts. It is too easy to send to the wrong account, at the wrong time, causing incredible embarrassment and set up the possibility of putting at risk the confidentiality of the customer.

  I can't believe that Microsoft rejected arbitrarily Outlook Express, without any real consideration for users who have a specific need for a separate identity.

  Is there a solution? Is there a mail client that works with Vista and 7, with the possibility for a SEPARATE identity?

  Help!

  Microsoft Outlook is an email client that works with Vista and 7, with the possibility for a SEPARATE identity.  It is not free, but it does what you want.

  I hope that's not too simplistic.  :-)

• Cannot restore a Pavilion from HP with Vista Home Premium a1520e

  Try to restore an HP Pavilion a1520e with Vista Home Premium using the recovery disks that came with it. Cooldown increased to 99%, then stops with a message "Error 002" ridiculous. Tried the 2nd HDD, reset the BIOS, 2nd set of disks, H/p unable to fix without sending any box and pay more than it is worth. I have all receipts and simply want a legitimate o/s that I can restore.

  Hello

  The problem is not with Windows, it's a hardware error OR you do not have the right Vista HP OEM
  installation media.

  1. check that the disks you have are correct for this model of CV. HP can sell you cheap the
  installation media real cheap since you already own windows.

  2. Remove ALL power and reinstall all the memory cards and cables (at both ends, where this is possible)-in fact
  delete and replace - do not just tight. Clean the dust bunnies and make sure that the vents are clear.

  By chance the need to re - install caused by malware?

  Hope this helps and happy holidays.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Softward raid with vista 64?

  I have vista ultimate 64 and would like to install raid 1 with two identical drives (not the boot disks).  Software raid is possible?

  Hello

   
  Yes you can use software RAID (redundant array of independent Disk).
  You can implement RAID at the hardware or software level. When implemented at the hardware level, seller of the equipment provides an interface to manage the tables and pilots to support different operating systems, with which you may have to work. Treatment for the RAID array is provided by a processor separate integrated in the RAID controller, offloading the CPU of the computer work. In addition, many RAID controllers often include a large dedicated RAM cache with battery backup. The combination of a separate CPU and a separate cache provides a substantial advantage over software RAID. Hardware RAID is usually significantly more expensive than software RAID built into Windows, but many manufacturers now include features basic on the motherboard hardware RAID.
  Vista includes an excellent and flexible RAID levels 0, 1, and 5 application in the software. It covers the possibilities by any means, but it's certainly enough for some purposes.
   
  Primary GUI (graphic interface) for the management of the disks under Windows is the disk management console.
  Although disk management provides a solution suitable software RAID, hardware RAID is widely available, either the original seller of Windows or third parties, and it offers substantial advantages over software RAID. Hardware RAID solutions range from a simple RAID controller, integrated to the motherboard and fully integrated and autonomous subsystems. Features and costs vary, but all say they provide superior performance and reliability on a simple software RAID solution such as the one included in Windows.
   
  For more information on the 'formatting of disks and readers' visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives
   
  For further assistance, contact the hardware vendor.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I try to install photoshop elements 7 in my laptop with Vista.

  I tried to install photoshop elements7 in my laptop with Vista.  When the installation is complete when the computer restarts and is frozen in the black screen with microsoft running downstairs.  After several minutes, a screen appears with"do you want to repair windows" and you click on fix.   Once the fix as the photo store is complete uninstall.  It is not in the Recycle Bin, it's as if it was never installed.  I tried 3 times this...  Can anyone help?

  Hi Millie123,

  Ø summers - you have vista 32-bit or 64-bit?

  Photoshop is not compatible with vista 64-bit. If you use 32 bit, try the step below.

  This can happen if there is any application is in conflict. Turn your computer start-up in minimal mode and then install the photo shop and check if the problem persists.

  Clean boot steps.

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. after starting the computer, check to see if you still get the same error.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  http://kb2.Adobe.com/CPS/404/kb404897.html

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Using Windows 7 Outlook 2007 get more "not responding" just as with Vista.

  Original title: "Using Windows 7 Outlook 2007 put in more and more"not responding"just as with Vista." "Outlook pst file corrupt again and looks like I'm carefree like that again - not a very technical user here"

  Recently, I installed 7 due to problems with Vista. Prompted by crashing in Outlook 2007. Began with "does not" message and now I'm getting the same thing with 7. "» The last time it happened that I found the corrupted pst file and decided to skip the Vista and support 7. Love 7 (as turning on your TV in comparison) but get the same message. Outlook runs slow again and don't know what to do now.

  Hi JackinGeorgia,

  Welcome to the Microsoft Answers site!

  Are you facing this problem only with Outlook or any other program as well?

  It seems that some background programs is in conflict with the proper functioning of Office Outlook 2007. You can try to put your computer in a clean boot and check the base program leading Outlook hang.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note:

  Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our

  Microsoft answers Feedback Forum and let us know what you think.