Equium L350D with Vista won't mode 'sleep'

Similar Questions

• Can't fix Equium L350D with Vista

  When I try to repair my computer, I get an error message saying not installed programs not

  Help

  You really think someone will be able to help you if you post only this small sentence?

  If it s not too complicated for you, then I would like to know a portable model, windows OS and something more about your question

• My Dell won't mode 'sleep'

  My Dell won't mode 'sleep'

  Not much to do.  What happens when you try?  Maybe I do say "standby" or "hibernate"?  If so, look here:

  "How to solve the problems of hibernation and standby in Windows XP"
    <>http://support.Microsoft.com/kb/907477 >

  HTH,
  JW

• Satellite C650-1CN won't mode 'sleep'

  The laptop doesn't pass in mode 'sleep'. The screen turns off but the PC does not sleep. I can force the sleep using the function keys, by closing the lid or the start menu.

  I have two Satellites with the same applications, it works perfectly, but it does not sleep. The old PC running Windows 7 32, the new PC running Windows 7 64 with Toshibas own power management utility.

  I tried to change the power management settings in Windows 7 and this has not solved the problem. The computer won't sleep on a network or in battery mode. The PC is a C650-1CN, bios has been upgraded to 1.5 and it has 4 M of RAM.

  Spoils a beautiful machine that is a good value.

  > The laptop don't pass in mode 'sleep'. The screen turns off but the PC does not sleep.
  > I can force the sleep using the function keys, by closing the lid or the start menu.

  Have you tried to change the different time for mode 'sleep'?
  How about processes that are running in the background?
  These running processes can prevent the notebook to access the mode 'sleep'.

  As you can see here on this screeshot, it s necessary to the configuration of the power plant.
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  In addition, you have to be sure that this plant has been set as default!

• HP Pavilion won't mode 'sleep'

  I have a HP Pavlillion, which is about 3 years old. Recently the comeputer going on "standby mode" (or when I put it in mode "sleep"), but continuous computer to go in and out of fashion 'sleep'. It is as if the computer goes in "standby mode" then about 10 min. later, it seems that the computer wakes up by itself (However the monitor isn't waking up). The monitor and the computer will wake up if I move the mouse or whatever. But now I just turn off the computer completely every night. Any ideas why this could happen and is there a way to fix it?

  Hello Banna1981,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you think that your computer is going in and out of fashion 'sleep' but the screen remains in standby mode and both the monitor and the computer when you use the mouse or the keyboard. I suspect that what you think is the computer wake up is actually planned a background running process or activity. If the monitor is to stay in the mode "sleep" I don't think that your computer wakes up or if it's to treat specific activities such as updates or to check his e-mail etc...

  If you are worried, I'd be happy to help you, but first of all, I encourage you to post what operating system you are using. And if your operating system is 32-bit or 64-bit like that I can provide you with specific information on the boot without failure and find for sure what is the cause of this activity.

  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• HP AIO 8610 Pro: HP AIO 8610 Pro won't mode "sleep" more

  Yesterday, I noticed that this theAIO Panel stays on sleep mode.

  When before, "standby mode", the Panel goes dark.

  I have reset the mode 'sleep' 10 minutes to 5 minutes only to determine if this will allow sleep.

  Also, I restarted the AIO8610 to recycle everything that can be stop 'sleep '.

  Please notify.

  Microsoft Surface Pro 3. 256 GB hdd, 8 GB of RAM. WIN 10; Docking station; 4 TB WD My Cloud mirror SAR for the storage file. HP LaserJet Pro M201 and HP OfficeJet Pro 8610 AIO. HP Elite 8000 Slim, SFF, Core 2 Quad 2.83 GHz, 8 GB RAM, 750 GB HDD, WIN10 (used mainly for broadcasting and as a PC Backup)

  I have "reset default" on the Panel of cntrol and reinstalled the AIO software.  Could it be an easier way, but what do I know?

  Everything works fine now.

• Re: Equium A200-1V0: Vista won't load - system restore does not

  Toshiba Equium A200-1V0, purchased January ' 08
  Vista Home Premium

  Upgrade office 2007, rebooted fine, saved all the files. I went looking for vista security updates & Office including. Net3.0 - pc crashed during installation. F8 to repair pc & system restore to front office installed. everything seemed well & rebooted ok so I have backed up all critical files.

  reinstalled office 2007 & vista hanging on the required reboot.

  Try to load in safe mode & vista hangs at crcdisk.sys. It was suggested to remove all pcmcia & 1394 drivers, but the switches/s/p do not work in command prompt so I can't be sure enough to find them all to delete or rename.

  F8 for pc repair & while the menu appears, it is very slow to get there.
  Startup Repair detects no problem, System Restore won't work, so assuming that restore lost points (there were a few elders before the one I went to). Command prompt will run.

  Toshiba has provided a system restore disc, but crashes after language selection. It was suggested that the disk was duff, so I downloaded the ISO to a disk of vista without the extras toshiba restore & that said it is loading & then sits right on the blue/green screen of vista.

  I have a basic family official OEM of Vista editing copy for a new machine, I do build, so tried to boot from a full installation of windows (without formatitng) - this also hangs on the blue/green screen of vista. This is my first to face with a laptop without a correct installation disc, so if I format & reinstall the will I lose the recovery partition?

  Any other ideas of what to try?

  Hello

  I think that it s nothing wrong with the software, but with the hardware
  If the reinstallation of Vista is not possible then this could be caused by a hardware problem
  I can only suggest on the malfunction of HARD, RAM disk. Everything is possible

  If I you would be then I would format the whole HARD drive I would be to delete all partitions and would try to reinstall the operating system from the recovery CD

  If it is not possible, then you should ask the ASP in your country for a control from laptop s!

  Good luck

• white screen after that vista went on mode 'sleep'

  Hello

  My laptop started to have problems after going sleep mode hibernation recently. I run a Dell Vostro under Vista 32 bit. My big problem is that I can't test one of the solutions I found on the internet so far because even with a forced shutdown the laptop never start back. White screen. Nothing is ever displayed.
  Last time I went out that holding the key FN holding power. Then released. The screen came blue and memory tests and drive hard started. I let it run and no problem was found on the hardware side. After the tests were performed, the computer restarts and I press F8 to boot into safe mode. Everything went well for a week after this episode. I tried the "sleep mode" once again and it was as if nothing ever happens. Everything worked well.
  And now, it's happening once again. This time, the combination FN-power supply does not work. Nothing appears on the screen ever. The power button not blink or change color. The hard drive light turns on for 3 seconds only when I try to start. Then it's screen white and everything that I hear the laptop fan...
  Any idea of someone from the combination of keys to force start the laptop into a kind of safe mode?
  Thank you very much!!!

  So it seems that I have to respond to me :) Just in case someone goes nuts facing the same issue, find multiple options on the web 2007 update you this, change the configuration that say, start in SafeMode etc., here is what I found to get out of the black screen after a watch on my laptop. I hope this might help someone else:

  1. Open the housing by unscrewing all to access the battery (not easy, go slowly and carefully do not damage the fragile covers). I hope that your battery is more accessible than mine.
  2. Disconnect the battery cable (if you have my laptop Dell Vostro: first - raise the head end of the connector so you can exit the orange cable gently)
  3. At this point, the rear of the laptop is completely "naked".
  4. Unplug the power cable
  5. Press and hold the power button to laptop for 30 sec.
  6. Plug the power cable back (battery is always not connected)
  7. Press the FN key + power button for 1 second and release them both at the same time
  8. The DELL logo is displayed, and finally the screen is not black more! I need the pre-boot system assessment tests. I hope that you will have this screen also. I suggest that you run the tests. In my case, nothing was wrong with the hardware. This is a Windows problem.

  After this step, I was able to start in safe mode and play with the features of windows. Since I'm a busy mom and small business owner, I don't have time to assess what is wrong or even think to completely replace Windows on an old computer laptop 1 year part-time, so far. So I just canceled the sleep function for now.

  Good luck.
   

• Wake up the computer with Vista from standby mode, get error SL08-010 Activation exploit

  'Error SL08 - 010 Activation Exploit' is what was on my screen when I woke from my comp to sleep mode.  The small print at the bottom of the page says that if that has not been fixed that I wouldn't be able to use my Windows Vista without putting my computer at risk. How can I fix this prob?

  Hello

  see if this information in the thread below helps you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/SL-08-010-activation-exploit-warninghow-to-solve/44149728-8e5d-E011-8dfc-68b599b31bf5

• Options of Touchpad disappeared on Equium A200 with Vista

  Hello

  I searched all over the web for a solution and found nothing that works.

  I have a satellite A 200, bought 6 months ago.

  I used to be able to adjust the settings on the touchpad, clicking in its pointing device properties, then settings in the device settings.

  However, now (since a Vista upgrade, perhaps?) Tap to click and all other options disappeared entirely from this menu.
  All it says now it is "Overview" and "buttons", no other options.
  I tried several relocations of pilot, wanted other parameters, but the settings seem to have disappeared.

  I read a similar bug here http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=30113&tstart=90
  

  But no solution.
  I would really like to find a way to solve this problem. Tap to click cause me all sorts of problems!
  

  Thank you
  FG

  SP1 is installed on your laptop?
  Have you tried to restore to an earlier time using System Restore tool? Can you please test and see what happens exactly?

• Microsoft Comfort 4500 wired mouse appear to interfere with the mode 'sleep'.

  After that I installed the mouse and downloaded the drivers, now the computer won't mode 'sleep'. The screensaver works. I had a similar problem with a Logitech wireless keyboard, but I found the solution to this on their Web site. Any help would be appreciated, thanks.

  Hello

  Hello

  1. don't you make changes on the computer before the show?
  2. not this problem occurs when you try to connect to another mouse on the computer?
  3. you receive an error message?

  
  Method 1:
  You can try the steps in the article of the supplied knowledge base and check.
  A computer that runs Windows Vista seems to sleep and then immediately wake

  http://support.Microsoft.com/kb/927821

  Method 2:
  If the problem persists, then perform a clean boot and check if it
  is due to any third party software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Equium L350D - mechanical problem with CD/DVD player

  Hello world! I hope that someone out there will be able to help me with this problem.

  I have a TOSHIBA EQUIUM L350D with a CARPET * A DVD-RAM UJ-850 s ATA Device like the CD/DVD drive. Recently, the small plastic disc that fits on the center pin and the handles of the CD or the DVD has started to come adrift when the drawer is closed and the rotation starts; It's a horrible grating noiise! The small plastic disc appears to push on the center pin and I tried pressing the home more firmly, but still, it breaks off at the speed.

  So I want to know: is there a way to secure the disc plastic safe? And if not, the only solution is to replace the drive? I don't know how I got into all this.

  Thank you very much in advance for your help!

  I m quite skeptical that you will be able to solve this problem. Check on eBay if you can buy the new driver.

  Replacement should not be that complicated, and it will be certainly simpler to solve this problem.
  If you need assistance with replacing optical drive let us know.

• P2715Q, Windows size and location change after the mode 'sleep'

  Hey

  After that the monitor wakes up fashion 'sleep', all the windows are in the upper left corner and in different size just before going to sleep. It makes me crazy. Did not help. Found a few registry hacks key, but it can't be that difficult.

  I use following:

  View P2715Q Dell, Windows 10 Pro GTX 1070

  Everything is up-to-date.

  Really hope you can help me!

  #update 1

  It has something to do with how long the mode 'sleep'. I set the Sleep mode function 1 minute, whereas the display 'falling a sleep' and woke up after 30 seconds or more. Everything was in place.

  This isn't a question of monitor. It is a video card driver problem. Tiles from 1920 x 1080 uses two P2715Q sewn together by the video card driver to get the resolution of 3840 x 2160. So if the video card driver is slow to initialize the awakening from sleep mode, all open windows and icons are tossed at top left. We see this issue "tile" on AMD and Nvidia drivers. All you can do is to continue testing video card drivers latest when they are released.

  Workaround solution =
  * Spend 90% of your icons to the taskbar or the far left background
  * Close all open windows before allowing computer standby modes

• Vista 64 bit won't in mode 'sleep'

  Hi all

  Just bought a new desktop with Vista 64 bit computer.  He won't go in mode 'sleep' and is therefore always on.  I tried to contact dell technical support and they said it was a problem of Microsoft/Vista about the transformers containing more than 6 GB of RAM.

  How do I get this resolved?

  Hello RobertVP,

  Thanks for posting in the Microsoft answers Forum.  The question that Dell was referring to involves hibernation, a deeper form of sleep.  Please read this article in the Microsoft Knowledge Base that explains the issue and a work around:

  http://support.Microsoft.com/kb/888575

  If you just try to get your system to put to sleep, there are some management settings power described in the article in the Knowledge Base you can try:

  http://support.Microsoft.com/kb/888575

  Let us know if or the other of these items solve your problem.

  Thank you

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.