CLI command for FDM in 9.3.1

Similar Questions

• need for WPA2 Personal Mode CLI commands

  I saw this example but I need the CLI generates the GUI. Can anyone help please?

  https://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#pers

  That's what I have to do without the GUI on a 1142N 12.4 running

  Configure in personal Mode

  The term made personal mode refers to products that are tested to be interoperable in mode PSK only of operation for authentication. This mode requires manual configuration of a PSK on the AP and clients. PSK authenticates users via a password or code identification, both the client station and the AP. No server authentication is required. A client can access the network only if the client password matches the AP password. The password also provides the numbers that TKIP or AES uses to generate an encryption key for encrypting data packets.       Personal mode is intended for SOHO environments and is not considered safe for enterprise environments. This section contains the configuration that you need to implement WPA 2 in personal mode.

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello

  Here are the commands for WPA2 personal mode CLI

  Configure the terminal

  dot11Radio interface 0

  encryption ciphers aes - ccm mode

  or

  encryption mode vlan ciphers aes - ccm< ---="" if="" you="" have="" multiple="">

  output

  dot11 ssid

  open authentication

  authentication-key wpa version2 management

  WPA - psk ascii

  Kind regards

  Madhuri

• EEM CLI commands do not run

  I'm new to scripting, SLA and EEM and went through the forums and documentation for a couple of days now to learn what I can.  I can't get my applet event handler to trigger a reason any.  I get the following syslog message based on my reaction als ip config:

  4 August 21:25:13.915: % RTT-3-IPSLATHRESHOLD: IP SLAs (100): threshold has occurred for timeout

  My setup is less than

  !

  !

  ALS IP 100

  2.2.2.2 - echo ICMP-source 1.1.1.1 ip address

  threshold of 1000

  timeout of 1000

  frequency 1

  calendar of sla IP 100 now start life forever

  reaction-configuration IP SLA 100 respond timeout threshold type 2 5 - type of action trapOnly xofy

  !
  !

  Event Manager applet ipsla-ploss

  PROACTIVE WAN PACKET LOSS SCRIPT description

  event ipsla operation id 100 reaction type timeout

  command action 1.0 cli 'enable '.

  Action 1.1, "conf t" cli command

  Action 1.2 cli command "ip access-list standard bgp-itineraries-in."

  action 1.3 cli command "5 deny 5.5.5.5".

  action 1.4 cli command "6 deny 6.6.6.6".

  Action 1.5 cli command "end".

  !

  !

  Any help is greatly appreciated!

  Add the following to your config:

  logging of IP sla

  activate the IP sla response alerts

• CLI command to set the power of 1231

  Anyone know the CLI command to fine-tune the power on a 1231 AP?

  Hi Timothy,.

  Maybe it's what you're looking for;

  local power

  Use the command from the interface of local configuration to configure the access point or bridge of power level of radio. No form of the command to restore the default setting. On the 2.4 GHz radio 802.11 g, you can define orthogonal frequency Division Multiplexing (OFDM) power levels and levels of power complementary Code Keying (CCK). CCK modulation is supported by the devices 802. 11B and 802.11 g. OFDM Modulation is supported by the 802.11 g and 802. peripheral 11A.

  Radio 2.4 GHz Access Point (802. 11 (b)

  [No] local power {1 | 5 | 20: 30 | 50 | 100 | maximum} 3

  Radio 2.4 GHz Access Point (802.11 g)

  [No] power local cck {1 | 5 | 10 | 20: 30 | 50 | 100 | maximum} 1

  [No] power local cck {-1 | 2 | 5 | 8 | 11: 14 | 15 | 17 | 20: maximum} 4

  [No] ofdm local power {1 | 5 | 10: 20: 30: maximum} 1

  [No] ofdm local power {-1 | 2 | 5 | 8 | 11: 14: 17 | maximum} 2

  5 GHz Access Point Radio (801.11 a)

  [No] local power {5 | 10 | 20: 40 | maximum} 1

  [No] local power {-1 | 2 | 5 | 8 | 11: 14 | 15 | maximum} 2

  [No] local power {-1 | 2 | 5 | 8 | 11: 14 | 15 | 17 | maximum} 2

  Note the maximum emission power depends on your regulatory domain and the antenna gain for your access point or bridge. For more information see the "Channels and antenna settings" section of the installation guide hardware for your access point or bridge.

  --------------------------------------------------------------------------------

  --------------------------------------------------------------------------------

  Note the supported transmit power levels on the various points of access and bridges.

  --------------------------------------------------------------------------------

  --------------------------------------------------------------------------------

  Note This command requires radio to be turned on and activated to determine valid power settings allowed on your access point radio.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_command_reference_chapter09186a00804e631f.html#wp2459939

  I hope this helps!

  Rob

  Remember messages useful rate...

• Cisco ACS 3.1 and Logging of Nortel Passport CLI commands

  Good afternoon

  We try to log commands CLI Cisco ACS version 3.1 of Nortel Passport 8600. The version of the code that runs on the Passport does not support Ganymede +.

  Passports authenticate OK but don't sign any order information. I "think" the problem is maybe that the VSA Radius of Nortel for cli-commands-attribute, 195, is not collected by ACS.

  Does anyone know how I would go to get this added to the existing list of Radius (Nortel) VSA?

  Thank you very much

  Kind regards

  Flett.

  Foisy,

  You must add the attribute Nortel 193-195 to activate the posting of the order.

  Unfortunately you can't download on code 3.x, you will need to upgrade acs to the 4.x code.

  Kind regards

  ~ JG

  Note the useful messages

• How to put power on and off through CLI command in ESX Server

  Hello

  We are facing a problem with VI Client members in VCenter or individual ESX servers.

  In this case how properly turned off (or) power on virtual machines through CLI command on the ESX Server.

  Any command available for this case.

  Kind regards

  Eric

  On PowerCLI: Take a look at vSphere PowerCLI Administration Guide

  Shutdown-VMGuest and Start-VM cmdlets

  On vSphere RCLI take a look at vmcontrol.pl

• Wanted to know the command for GUI-based server in windows Server 2016

  Please let us know the command for GUI-based server in windows Server 2016.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Where can I find the commands for Microsoft Combat Flight Simulator WW II European series keyboard, 1998

  I recently bought a used game, Microsoft Combat Flight Simulator WWII European Series, 1996, and it was just the drive.  Where can I find the commands keyboard for this game?  I just need a diagram.  Can someone help me?

  Hello

  "Where can I find the commands for Microsoft Combat Flight Simulator WW II European series keyboard, 1998"

  It came as hit the first Google search for your question:

  http://www.allgame.com/game.php?id=14416&tab=controls

  See you soon.

• I would like to have a single command for entering e-mail addresses when asked.

  the e-mail entered with ease!

  original title: I would like TO HAVE a SINGLE COMMAND FOR IMPUT ADDRESS EMAIL REQUEST

  Hello Aabtmb

  Thank you for visiting the Microsoft Answers site.

  The question you posted corresponds to the AOL email and would be better suited to the AOL community. Please visit the link below to find a community that will support what ask you:

  http://help.AOL.com/help/microsites/microsite.do

• Error: Cannot copy Admin$\system32\dwrcs.exe when trying to use DameWare NT Utilities card remote Commander for remote control a workstation.

  Original title: impossible to copy to Admin$\system32\dwrcs.exe.

  I'm using DameWare NT Utilities card remote Commander for remote control a workstation.   Other workstation remote control works fine.   On the workstation with the fact that I'm having the problem the following message appears:

  Cannot copy
  C:\Program Files\Dameware Development\Dameware control\DWRCS.exe mini remote

  TO

  \\workstation-name\ADMIN$\System32\DWRCS.exe

  System error: 5

  The system message:

  Access denied

  I don't think it's a matter of DameWare since other workstations are accessible.   I think that this could be a Windows problem with a kind of security.  Anyone know?

  Hello

  Your computer is connected to a server, or a domain?

  You can follow the steps in this link:

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Access denied messages when the connection to the remote PC

  If your computer is on a domain network, I'd recommend posting your query in the TechNet forums.

  Hope the helps of information.

• When you type an e-mail on my computer dell laptop with Vista system interprets constantly my typing as a variety of commands for example find, cancel, etc. cut.

  When you type an e-mail on my computer dell laptop with Vista system interprets constantly my typing as a variety of commands for example find, cancel, etc. cut.

  Hi stuart-vm,.

  I looked at the Dell website for the resolution of the problems of touchpad.
  Look at the troubleshooting here.
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_0

  This is information from Dell:
  Press the NumLock key on your Dell laptop
  In order to have the features of a 101 keyboard keys on a laptop key 85, the NumLock key active keyboard 10 key functions that would be normally resident on the right side of a standard keyboard. Simply press again to return to normal operation

  I don't know if it will help your problem.

  There is a link to the Dell Diagnostics to see if there is a hardware problem:
  http://search.Dell.com/results.aspx?s=DHS&c=us&l=en&CS=19&k=hardware+diagnostics&cat=SUP

  You can post in the Dell Community listed below if the advice above does not help.
  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Thank you

  Marilyn

• Voice commands for each button, I press

  Hello. I can't enter my PIN code to access the phone. There is a 'yellow box' around the information on the screen with voice commands for each button that I push. I tried to reboot, also tried to put in sim card numbers and the PUK have... Can someone please...

  Hi @Warren1,

  Looks like you've probably enabled TalkBack on your phone.
  You should be able to disable it if you follow the instructions described here (follow those for Android 5.0 or 5.1):
  http://support.sonymobile.com/global-en/xperiam4aqua/KB/023101885505ba55014a443132620076ab/

• user name for FDM

  We use the user name active directory for connection of Hyperion.

  This user name is 20 characters. Using the same ID, the user can connect to the workspace of Hyperion. However, she is still getting the error of authentication of security on FDM. She has exactly the same as other users FDM is created. (Add to a group of native directory that is configured for FDM. Then assign the locations named in the FDM)

  This makes me think if just FDM does not like long user names? She also tried Prod environment and Dev and gets exactly the same problem. Any clue? Thank you.

  Should not be the length of the name, probably that the password has a & as mentioned JTF85.

  The connection of the user to the established customer does  If they can, should be an & in the password.

• What is the CLI command in ESXi 5 to check port was to bind to the iSCSI adapter.

  Hello

  
  

  It is the command in ESX 4.1 to verify that the iSCSI port is linked with the adapter
  

  
  

  #esxcli swiscsi nic list vmhba d
  
  
  I wanted to know the same command in ESXi 5 to check that my port is bind (I did with vSphere Client).
  
  
  I pulled this same command, but it throws error "namespace" something.

  Help, please.

  
  

  There are some commands ESXCFG had replaced by some other commands in ESXi5. Please take a look at the link for all orders for replacement of ESXi5.0 below.

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.VCLI.migration.doc_50/cos_upgrade_technote.1.9.html

  "esxcli iscsi" is the command for all iSCSI related research in ESXi5.0.

• What is the CLI commands

  What is the CLI commands to monitor a router interface (800 series) 'live '? Watch the increment of packages.

  I have provided links to the appropriate documentation. First you will need a basic understanding of the command line Interface (CLI). Then, you can use the commands to enable Capture of integrated package.

  Using the command in the Cisco IOS software command-line Interface

  Cisco IOS embedded packet Capture