need for WPA2 Personal Mode CLI commands

Similar Questions

• For AP in FlexConnect CLI commands

  Hello world

  Just as the title says, as much as I Googled it I can't seem to find what are the CLI for AP in FlexConnect commands

  I know that we can telnet/ssh to the AP in flexConnect, but what are the possible commands that we run on the AP?
  Hope someone can help :D

  Thank you!

  This can be useful if you do not see it

  http://www.Cisco.com/en/us/docs/wireless/controller/7.4/command/reference/Flexconnect/flexconnectcr74.PDF

  HTH

  Rasika

  Pls note all useful responses *.

• Need help with XP, you try to restore the system to the mode safe mode with command prompt.

  XP does not start even in safe mode.  Can access the mode safe mode with command prompt. Tried to use the repeated suggestion here.  The said command is not available.

  http://support.Microsoft.com/kb/304449 I tried these instructions from microsoft are supported and the command will not be accepted.

  Any help out there?

  Hello

  1. What is the exact error message when you try to access the computer in safe mode?
  The issue seems to be with the corrupted registry that prevents Windows XP startup.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
  Note:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

• Garry s Mod 13, install DirectX has failed, "a .cab file is needed for installation is not reliable?

  Hey!

  I did research on this problem literally all over the web, on the forums, support contact Dell and Microsoft hardware too.

  But the question is always free!

  -Very well, so I recently downloaded 13 beta Garry Mod, and I wanted to play. I clicked on 'Play' and he said:

  "Error!"

  You need to update DirectX - google search for "DirectX Runtime" "

  So, I put google and downloaded the link he gave me. I ran the program, and that's what happned:

  "Initializing...". »

  "Installation of components: "

  DirectX Runtime Opitonal Componets.

  Then suddenly out of nowhere, a window pops up saying:

  "A .cab file is needed for installation is not reliable." Please check the cyptographique Services are enabled and the certificate file is valid. »

  After clicking 'OK', it goes back to the origional instalation window saying "Installation failed."

  I'm extremely lost here, I searched for answers, but none of them seem to apply or work.

  I have Windows 7 on an Alienware M14XR2.

  Something will help you, thanks!

  try creating another account

• How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.

  How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.

  Hi johanb64152807,

  You can use eSign service, where you can send the document for signatures of several signatories, but the document will be sent to the following signatory after the earlier signed & it is not possible for him to make the changes.

  Documents KB for help: -.

  • Get started | Cloud of Document Adobe Tutorials
  • Quick Installation Guide | Services Adobe eSign
  • Send for electronic signature in eSign Adobe Document Cloud services | Adobe Acrobat DC tutorials
  • Send agreements and collecting signatures. eSign services
  • FREQUENTLY ASKED QUESTIONS | Services Adobe eSign

  Kind regards
  Nicos

• I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

  I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

  If it is hosted with Adobe Business Catalyst Adobe Support can help you.

  If it is hosted elsewhere the only people who can help you with that is where it is hosted.

• My computer started to send copies of all email sent again and again... as 26 copies for 1 person, please please someone can help me?

  Need help

  Can someone help me I am not very computer... my computer started sending multiple copies of any email sent again and again... like 26 copies for 1 person, please please someone can help me
  You did not mention the e-mail program you use. If it's Outlook Express, you have corruption of dbx files.
   
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• Cisco ACS 3.1 and Logging of Nortel Passport CLI commands

  Good afternoon

  We try to log commands CLI Cisco ACS version 3.1 of Nortel Passport 8600. The version of the code that runs on the Passport does not support Ganymede +.

  Passports authenticate OK but don't sign any order information. I "think" the problem is maybe that the VSA Radius of Nortel for cli-commands-attribute, 195, is not collected by ACS.

  Does anyone know how I would go to get this added to the existing list of Radius (Nortel) VSA?

  Thank you very much

  Kind regards

  Flett.

  Foisy,

  You must add the attribute Nortel 193-195 to activate the posting of the order.

  Unfortunately you can't download on code 3.x, you will need to upgrade acs to the 4.x code.

  Kind regards

  ~ JG

  Note the useful messages

• Satellite A300D-15B - need for Windows 64 - bit XP SATA driver

  Hello

  Someone has drivers SATA for Win XP 64-bit for Satellite A300D-15B?

  Kind regards
  Ganesh

  Hello

  As far as I know this laptop Satellite A300D-15B was equipped with AMD chipset and therefore the SATA driver should be part of the ATI graphic driver.

  But you can also install the Win XP without the SATA drivers.
  In the BIOS, you will need to set the mode SATA from AHCI to compatible.

  Then you should be able to install Win XP on this laptop.

• Need for a coefficient of fish using deformation measurement gage (wheatstone)

  Hello

  I'm building this interface labview eventualy do strain meter measures on composite samples. I tested what I've done so far in half-bridge config. and so far so good. I read about the need for my wages on the material in half or full-bridge ( http://www.ni.com/white-paper/4172/en/#toc1 ). My question:

  LabVIEW should a ratio value (s) accurate material fish when you use DAQmx (one of the "Measurer of strain information" requested as input for DAQmx) to get good accurate values of strain?

  (1) in other words, if I use 2 measurers (half-bridge: one in the axial direction of the sample, one at 90 ° from the axial direction on the sample), Labview DAQmx will not use the "ends of balance (accuracy/temperature/offset) of the half/full-wheatstone-bridge-config with only a. relevant fish worth?

  (2) If Yes: This means that I must first find coefficient of fish of the material for each type of material (composite). So, what would be the best way to put my wages (half of the full bridge) on the material to know an "accurate experimental value" coefficient of fish without having? (looks like using bending modes are the only way)

  (please consider http://www.ni.com/white-paper/4172/en/#toc1 as a reference)

  TY,

  Daniel

  Strain_Life,

  From what I could dig up, LabVIEW will not calculate a coefficient of specific real fish since it is purely an entry and uses only this entry for v.f..  Half and full bridge configurations are only for the "purposes of balance." This limits you to calulating your own fish for the composite ratio, which, at best, would be a way of the materials that you use.  This is a pretty good site for known values of the coefficients of fish from: http://www.engineeringtoolbox.com/poissons-ratio-d_1224.html

• A .cab file needed for installation is not reliable. Please check the Cryptographic Services are enabled and that the cab file is valid .__Help! __

  OK, so I need DirectX 0.9 c to the game red alert 3, but I can't on the new directx installed on my computer because of this error
  A .cab file needed for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  have you tried solutions on how to solve this problem posted by mods on the previous posts with a similar problem, but it does not work for me

  help is appreciated, thanks

  Game of automatic encryption Services Cryptography on AutoServices and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Reference: http://support.microsoft.com/kb/822798/ and follow all practices listed in the article.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• A PC can operate effectively WITHOUT the need for anti-virus software?

  Come to think if the first PC I've had and the worms Blaster threatened everyone...

  I do not just shoot when to install my anti-virus software, I need to close my Windows Firewall... 2 + 2 = and Yes, when I did I got the virus of shit...

  If only I had not installed the Norton... do you not think that any PC can operate without the need for anti-virus software knowing that you must close

  the Windows firewall and use theres rather...?

  I wonder!

  Hello

  It would be unwise to try to start without antivirus/antispyware are has just too many real threats and
  methods for malware to attack the system. If you attempt to do if of course you have redundant and
  current backups.

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error running on the SIMS 2 and need for Speed Carbon with WIN7 Ultimate 32 bit

  
  

  • Error running with the SIMS 2
  • The error that says: the DVD error running is not found
  • I tried to fix it: with XP SP3, VISTA SP2 compatibility mode (I installed the game and I want to play with the compatibility mode for XP with Vista, now I installed WIN7Ultimate 32bits and it doesn't work
  • I already downloaded the latest patch and still work does not correctly...
  With the CNSA, I have the same problem, it starts, but when loads of information to start playing, it opens a window saying the program cannot continue to run, restart the application and the ini.

  Hi fedelovrin,

  Do you have any error message during the installation of the game?
  Is that your DVD player plays all DVDs correctly?
  Could you give us the exact error message that you meet?
  Is the same error message on Need For Speed Carbon?
   
  Since this game is compatible with windows 7, it should work properly without compatibility mode.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Sims%202
   
  Like you said you used the Windows XP on Windows Vista compatibility mode. Try to use under Windows 7 XP mode also and check.
  You can find more information on compatibility modes in the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-questions
   
  Here is the link for the support of the SIMS 2:
  http://TheSims2.EA.com/help/index.php
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Post a message (need for clarification)

  Hi all
  This is going to be a long post, because I want to give good background.

  I wrote a message on the cancellation of the automatic updates. Here, it is pasted:

  "I have an old HP Pavilion dv7-4180us Notebook PC using Windows 7 Home Premium. It seems that I can never stop automatic updates. There is a problem.
  On the one hand, we are informed to install updates to keep our machines running well, up-to-date, to increase security. But I found that when these control sooner or later my computer, that my device is malfunctioning and I have to run the system restore.

  QUESTION: how to cancel - once for all - automatic updates all the?
  QUESTION2: How do you know which programs are bad operating system and are necessary?

  The damage has been done is usually a bad slowdown in operations. Start-up takes longer, opening files is slower, and I got an impossibility to open my system thanks to the fingerprint recognition.
  About me:
  -00359 - 899 2687 OEM product ID - processor: Intel (R) Core (TM); 5 UC; M 460 @ 2.53 GHz
  -Memory (RAM) installed 4.00 GB - system Type: 64-bit operating system
  -Prod. No.: XG834UA #ABA
  All comments welcome. Thank you. »

  (end of my first message block)

  A response has been sent by a peer:
  He pasted my original message in the upper part of his, then added the comment below. I have stick.

  "Windows updates are updates most of the time required of course there are glitches but then you must restore to the last frame of work and try to update again." Constant updates is a good indicator of your operating system is corrupted and you need for your system back to factory recovery install and update again.
  -First follow help links.
  Do not know how to display help click on the following link.
  First time here? Learn how to post and more
  -For disk recovery only.
  Get a HP USB recovery or HP recovery disc drive
  Read this before ordering your recovery discs! (United States and Canada only)
  Don't PM me if you do not allow PM in return. »
  (end of message from One Peer, glued)

  I tried to send a response to a peer. I clicked on the button "Answer" in the bottom right of his message, but my answer is back to my original thread. The 1st link in the message is 'Learn to use the forum.' It is said (stuck),

  A brief subject title including:
  • Name of the product
  • A brief description of the problem
  • A detailed message with the following information:
  o name of the product and operating system
  o How do I find my product name and number?
  o Description of the problem, including:
  o error messages, if applicable
  o changes to your system until the problem occurred
  o do not include the serial number of the product or personal information.
  (end of dough)

  With this link, I guess that a counterpart found my original post did not argue correctly. BUT: I entered the information about the product. on my first line and below the o/s. According to info. the link, I did everything that I need.

  QUESTION: was my insufficient message following protocol?

  Approved One also said in his message, (quote is pasted): ' don't not PM me if you do not allow PM in return '.
  In my attempt at a peer response, I wrote (pasted below).

  "Your last comment, ' Don't PM me..." If you do not have... "
  Could you explain that? Do you have I have somewhere a "PM" option for answering machines cannot delete "PM" me? Not to my knowledge. Finally, please be so kind as to explain what is "PM". "(end of dough)

  QUESTION: given that my answer to the q. above might not have reached a counterpart, can someone pls. specify what is "PM"?

  Another issue is the link 'Learn to use... forum.' A link on this link goes to "" tips ask the ' very best Question. "» "I opened that and saw this picture:

  

  In the image is "CNF". It's a serial number. Confusion which is on the first link "learn... use... forum", it is said, 'Do not understand the serial number of the product, or any personal information'.
  Please clarify this discrepancy, betw the statement and the image.

  LAST QUESTION: want to post this message, I thought that it wasn't on laptops, then search "HP Expert Forum. However, under "Choose a Board" has a long list, then "Show all" and "HP Expert Forum" comes. However, by clicking on it, I can't see in the empty bar where I need to place it. What I am doing wrong?

  Please follow the long message. All responses appreciated.

  AtAF

  I can't answer all your concerns. I will try to answer some of your questions and give you some places to look for answers.

  ---------------------------------------------------------------------------------------------------------------

  P.m.s are Messages private, somewhat like a mail between posters, but always using the guidelines and the presentation of the general forum.  In general, most people have this feature enabled.   I have impossible (not) comment in particular on the use of any Expert of the service.

  More information: How to send a private Message

  ---------------------------------------------------------------------------------------------------------------

  The bit about Product Information reminded members do not provide the serial number of their computer.  People post their serial numbers, their send addresses, same numbers on occasion.  It is an invitation only and we strongly advise anyone to publish personal information on this public Web site.

  ============================================================================

  Windows updates

  Everyone has an opinion about updates.  On a Windows 7 system, the need for updates - once the system is installed and the main updates are installed, AND assuming that it does not install no matter what additional programs or software - is mainly to preserve the system of some security problems are hiding everything.

  If you want to turn off Windows updates, then do it.  You are the admin.  It is your machine that is at risk - or not - and it is your decision to make.

  You can switch automatic updates / stop in

  Control Panel > set view icon > Windows Updates > settings

  Windows updates - turn auto update or disable

  ============================================================================

  Essential programs

  As a general rule, you must the programs running on the computer when it starts up which are included in the list of programs in the system and Microsoft programs in your startup file configuration list.

  How to use MSCONFIG in Windows 7

  Note the general Word - depending on what you have installed on your computer, your boot file can be filled with, well, an interesting range of programs that can indeed have slowed down the performance of your system over time.   Yet once, however, most of the programs - unless they are poorly written, or you forced them into the startup sequence when they belong there – are not by themselves slowing down the system by law "to be in the startup list.  In other words, you might consider doing some homework before snatching the programs in this list.

  ============================================================================

  -Comment-

  Your computer contains only 4 GB of RAM and he is older; We say "vintage".  This is not to start with a lot of resources and Windows 7 can, in itself, consume a lot of what is available.  Windows 7 is greedy.

  Add a gourmet operating system, a file system (perhaps) fragmented, a couple of badly written programs (bad code), less fast blazing to the Internet, and you might have the recipe for a slow computer.  I'm not saying that your computer is under one of these weaknesses, only that many computers don't have these problems.

  -------------------------------------------------------------------------------------------------------------

  Resource monitor

  Resource hogs could be traced using the resource monitor.  Even on Windows 7, the tool is pretty sophisticated. You can spend time learning how to use it effectively.  However, the program is very effective to help you quickly catch programs that are hogging resources (memory and network, for example) that you have available.  For example, if you have a program that took all the memory and ran Amok, so to speak, the monitor will be able to quickly show what offending program to the wrongdoer.  In most cases, you can kill the culprit (identify, right-click > kill).  If you trash your system and really hang things up, press the power button and accident-shut down the computer.  You really want to do it very often. but every Admin has made at least once a clearing.

  -------------------------------------------------------------------------------------------------------------

  Maintenance

  If the system is corrupted due to lack of maintenance, then you can provide this service by giving him some of the attention, he needs without actually going and perform a complete restore.  (Shudder).    Good maintenance, especially on a vintage with a limited capacity system helps the computer make the best use of its resources.

  Good care tips can be found here:

  Improving the performance of the system without adding memory (Windows 7)

  -------------------------------------------------------------------------------------------------------------

  Fingerprint login

  After that all other maintenance was performed, it is possible that the following might help to restore the connection of fingerprints.  Understand that I have NOT used digital personal in a certain number of years and this is a quick overview of the subject.

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  If you use a laptop:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect
  • Reinstall your driver validity sensor:

  validity sensor Driver V2.1.0.2 RevA Win7 sp52354

  • Restart the computer and log in
  • (Re) Install the Digital Persona software

  sp50048 Digital Persona Fingerprint Reader Software V5.1.0.175 Rev A

  At this point, I restart the computer once more and sign in, although this software is so robust that you could get away with jumping final restart.

  Reference:

  HP Pavilion dv7-4180us Entertainment Notebook PC Drivers

  -------------------------------------------------------------------------------------------------------------

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!