CLI equivalent to esxcfg-volume - M power

Similar Questions

• missing volume and power battery icon

  icon missing battery volume and power for laptop under vista, I tried the fix he suggestion

  Hello

  Try Method 1 and if it is not available, try Method 3 in the link:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can also try a system restore to before that was the problem:

  «How to make a Vista system restore»

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• problem running the white Defender on the volume and power

  I'm unable to access volume and power.  I tried through notifications, but they are both hidden.  first of all, is power. the last time I ran the volume and I can't seem to be able to reverse the trend.  Please help I've tried everything.  I have microsoft vista ultimate

  I'm unable to access volume and power.  I tried through notifications, but they are both hidden.  first of all, is power. the last time I ran the volume and I can't seem to be able to reverse the trend.  Please help I've tried everything.  I have microsoft vista ultimate

  1. What is "defender" has to do with the Volume and power?
  2. what "advocate"? Windows Defender?

  3. which of the following statements applies to your question...

  You see the icons of the Volume and power, but they do not respond.
  Volume and power disappeared.

  The Volume and power iocns have disappeared, use this tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go to the third method and use...
  #2 for the Volume icon
  #4 the power icon (battery)

  * Don't forget to restart the computer perform the tutorial.

• I am unable to get my volume and power icons in the tray again.

  I try to get the use of the battery and the volume control in the notification area, I took the necessary steps to activate the icons, but they are gray and turned off so I'm not able to click on it and turn it on. What can I do to get them back in the region of notice... once again, I went to customize and click the icons of the Tower on or off and I couldn't because just the power and volume are grayed out and unable to move, and stuck in the closed position

  Hi Jodaro83,

  If one of the system icons is out, you can reactivate the as follows:

  Right-click on the taskbar and select Properties. This will bring up the tab "properties of menu taskbar and start.  From there, you can click on Customize button on the icons

  section. Look for the icon that you are missing, and check the status. The type of report should read "Hide icon and notifications", change that to "Show icon and notifications".

  If this does not resolve the issue most likely you have a problem with group policy on your machine. This can be corrected by following the instructions on the following link:

  http://www.mydigitallife.info/2009/01/01/fix-network-clock-volume-and-power-battery-system-icons-missing-with-disabled-or-grayed-out-check-box-options/

  Hope this helps,

  Steve <> Microsoft Partner

• problem with esxcfg-volume on vMA 4.1

  Hello

  I am a beginner with vMA. I use vMA with ESXi 4.1 4.1.

  Vifp addservers and vifptarget - set to an ESXi, but l - or control - list esxcfg-volume return nothing!

  What have I forgotten?

  When you run vifptarget - together makes your command prompt show the appropriate host?  You should see something like this:

  \[VS-ESX01.lab.vsential.NET]$

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• System icons shows is not in the Notification area. Unique clock, no Volume, network, power. Help ~!

  Volume, network and power are gray in the Properties menu.

  Help ~!  Thank you very much ~!

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  If gray try Method 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 click on the Area of Notification tab (see screenshot left step 3 below)

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• persistent data store force mount

  Hello.

  I look for ways force mount the PowerCLI data store.
  and I found the following thread.

  PowerShell ResolveMultipleUnresolvedVmfsVolumes (equivalent of esxcfg - volume.pl)

  This is exactly the kind of thing I was looking for.
  But what is this script provide a constantly mounted?
  Need corresponds to the option "esxcfg-volume - M". '-m' option is not.

  Thank you

  I don't think that you can explicitly specify a persistent mount in the call to ResolveMultipleUnresolvedVmfsVolumes.

  You can check the persistence like this

  ....
  $Result = $vmHostSS.ResolveMultipleUnresolvedVmfsVolumes ($HUVRSarray)
  $Result | Select @{N = "Name"; E = {$_.vmfs.} Name}},@{N="persistent '; {E = {$_.vmfs.forceMountedInfo.persist}}

• LVM. EnableResignature in ESXi 4

  Help, please. After the upgrade to ESXi 4 lack of datastories. In the previous version was found, it was necessary to change the value of LVM. EnableResignature = 1. Now through vSphere Client that can be done.

  For ESX 4 solution was found here:

  http://communities.VMware.com/thread/211404

  But how to ESXi 4 where there is no Shell access. In addition, in vSphere 4 CLI also no esxcfg - volume.pl!

  This is because you use the free version of ESXi and the VI API is read only access unless you buy at least the basic license which will give you the two read/write access, more details explained here: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Lack of Volume, network and power in the Notification area icon

  All these icons have disappeared randomly my notification area...
  I went into properties, to see if they have checked, so they go, BUT it shows that only the clock has a check mark in the box and the network, volume, and power will not let me check boxes.
  How to view again?

  AHA, that's good. I restarted my computer until you sent me this link, and it worked.

• Unable to get power and volume icon on the taskbar.

  I lost my volume and power icon taskbar (they were there).  When I go to the area 'Turn icons on and outside', these two are dimmed and it wont let me turn on them (Windows 7).  I don't have hidden them... what should I do?

  Hi tominkc

   

  You can use the steps below and the check is these help-

  a. right click on a zone empty of the taskbar, and then click Properties.

  (b) in the Notification area, click Customize.

  c. for the icon of power and volume, select Show icon and notifications. The icon remains visible in the taskbar in the notification area, and notifications are displayed.

  d. click OK.

  Also see the help link below-

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

   

  I hope this helps.

• CLI command to set the power of 1231

  Anyone know the CLI command to fine-tune the power on a 1231 AP?

  Hi Timothy,.

  Maybe it's what you're looking for;

  local power

  Use the command from the interface of local configuration to configure the access point or bridge of power level of radio. No form of the command to restore the default setting. On the 2.4 GHz radio 802.11 g, you can define orthogonal frequency Division Multiplexing (OFDM) power levels and levels of power complementary Code Keying (CCK). CCK modulation is supported by the devices 802. 11B and 802.11 g. OFDM Modulation is supported by the 802.11 g and 802. peripheral 11A.

  Radio 2.4 GHz Access Point (802. 11 (b)

  [No] local power {1 | 5 | 20: 30 | 50 | 100 | maximum} 3

  Radio 2.4 GHz Access Point (802.11 g)

  [No] power local cck {1 | 5 | 10 | 20: 30 | 50 | 100 | maximum} 1

  [No] power local cck {-1 | 2 | 5 | 8 | 11: 14 | 15 | 17 | 20: maximum} 4

  [No] ofdm local power {1 | 5 | 10: 20: 30: maximum} 1

  [No] ofdm local power {-1 | 2 | 5 | 8 | 11: 14: 17 | maximum} 2

  5 GHz Access Point Radio (801.11 a)

  [No] local power {5 | 10 | 20: 40 | maximum} 1

  [No] local power {-1 | 2 | 5 | 8 | 11: 14 | 15 | maximum} 2

  [No] local power {-1 | 2 | 5 | 8 | 11: 14 | 15 | 17 | maximum} 2

  Note the maximum emission power depends on your regulatory domain and the antenna gain for your access point or bridge. For more information see the "Channels and antenna settings" section of the installation guide hardware for your access point or bridge.

  --------------------------------------------------------------------------------

  --------------------------------------------------------------------------------

  Note the supported transmit power levels on the various points of access and bridges.

  --------------------------------------------------------------------------------

  --------------------------------------------------------------------------------

  Note This command requires radio to be turned on and activated to determine valid power settings allowed on your access point radio.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_command_reference_chapter09186a00804e631f.html#wp2459939

  I hope this helps!

  Rob

  Remember messages useful rate...

• vSphere cli - script lack power

  Hello world

  I'm new to vsphere cli and need help to obtain power information that we need. I am trying to generate report by cluster vmware tools and I need additional information of the virtual machines namely, contact, created by and created the fields exported to my csv. Here is where I am at this time. I have the annotation of wrenching, however I do not know the commands script/right pull-out contact/createdby and created on the fields of a VM. I hope someone can help. Thank you.

  Notice-EEG - ViewType virtualmachine - SearchRoot (get-cluster 'test') user.user-filter @{'Summary.Guest.ToolsVersionStatus ' =' guestToolsNeedUpgrade'} | Select Name,@{N='tools worm '; E={$_. Config.Tools.ToolsVersion}},@{N='Tools State; E={$_. Summary.Guest.ToolsVersionStatus}},@{N='Guest ' OS. E={$_. Config.GuestFullName}},@{N='VM. Notes; E={$_. Summary.Config.Annotation}} | Export-Csv - NoTypeInformation - UseCulture-path C:\test\test1.csv

  Give it a try like this

  Get-View -ViewType virtualmachine -SearchRoot (get-cluster '1Mike').id -Filter @{'Summary.Guest.ToolsVersionStatus'='guestToolsNeedUpgrade'} |Select Name,@{N='tools ver';E={$_.Config.Tools.ToolsVersion}},  @{N='Tools Status';E={$_.Summary.Guest.ToolsVersionStatus}},  @{N='Guest OS';E={$_.Config.GuestFullName}},  @{N='VM Notes';E={$_.Summary.Config.Annotation}},  @{N="Contact";E={    $key = $_.AvailableField | where {$_.Name -eq "Contact"} | Select -ExpandProperty Key    $_.CustomValue | where {$_.Key -eq $key} | Select -ExpandProperty Value}} |Export-Csv -NoTypeInformation -UseCulture -Path C:\test\test1.csv
  

• Power supply selection guide

  This MOD can make a post-IT.

  Here is a general guide on how to select a power supply for your HP desktop computer.  The majority of the standard ATX power supply (PSU) must fit in an envelope of HP.  The exception would be a slim casing or the esoteric Merle.

  Looking for a certification 80 + on the PSU to save electricity.  A PC is normally idle or operate at low load 75% of the time.  Therefore, to find a power supply which is more effective in the range 50 - 90W.  A power supply 80 + 350W reaches the level of efficiency of 80% at the exit of 70W (20% of rated output).  The output must be greater than 140W to achieve the same level of efficiency of a PSU of 700W 80 + equivalent.  So choose a power supply that is rated at 25% more than the maximum load of the ACTUAL spending of the rig you will save more of $ on electricity.

  A modern PSU is designed to achieve maximum efficiency between 20 and 80% of the nominal power.  Running a power supply above 80% charge level will result in excessive heat, noise and premature failure.

  A platform Nvidia GeForce GTX 280 (1024 MB of RAM) will rely on 350W max to the wall.  Taking into account the effectiveness of a block of power SUPPLY 80 +, the actual load on the power supply is only 280W (350 x 0.80).  To calculate the required power supply, multiply the actual load by 1.25 (25% margin).  In this case we only need a PSU 350W (280 x 1.25) to run this GPU.

  Let's apply what we know of a rigging of Radeon HD 4870 (512 MB RAM).  290W max to the wall.  Actual load is 290W x 0.80 or 230W.  Now, apply the 25% margin rule and we come to a requirement of 290W PSU (230W x 1.25).  Even if we apply a safety margin of 50%, the power required is always under 350W (230W x 1.50).

  There are no overspec need the power supply by 50%, unless you run your PC up 24/7.  Don't forget that there is a huge variation in the quality of the PSU and side.  Maybe a good 500W PSU is not able to provide as much energy as a quality 350W.  Antec Earthwatts/NeoPower/TruePower and Corsair Seasonic are widely available at several American retailers of quality units.

  High-end power supplies number will need additional power supply PSU in the form of one or two 6/8 pin plug GPU.  You can buy an adapter to convert a molex 4pin to plug 6-pin power of GPUS.

  http://www.TomsHardware.com/reviews/GeForce-Radeon-power, 2122 - 3.html

  Hi Nautsj,

  You need to open your PC and measure the physical dimensions of your diet. Here is a list of the things to consider:

  1. technical characteristics
  2. the total power - important
  3. amperage 12 + v - important
  4 modular - is not required, but I like the flexibility
  5. guarantee
  6 i7 and SLI ready
  7. energy efficiency
  8 cost
  9. size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. a single + 12 volt rail is a better choice.

  www.Newegg.com has many choices of power supplies. Corsair, OCZ, Rosewill, Thermaltake...

  The typical EVGA GTX 570 in 9 "long.  The adjacent slot on the PCI-E x 16 slot must be vacant.  Open your PC and do some measures so that you know for sure if the card fits.  According to me, it will fit.

  For what is a PSU, Corsair CX600has very little growth, but the Corsair HX650gives you plenty of space to grow.

  I use the HX650 in two PC.  It is a modular model in order to have better options with the selection of cable.

  "How-to" HP articles should be useful.

  TIP: When installing the power supply, unlock the scanner and slide it forward to facilitate the removal and installation of the new power supply.

• RN102 - please remove inactive volumes in order to use the drive - data loss

  ReadyNas 102, 1 x 1 TB of disk (in 2nd driving position), belonging to 10 days, using 6.2.5

  I copied perhaps 25 data DVD disk (1 volume, through about 4 servings). I have lost the network connection to the NAS server, could not get the sin to meet switch & finally upluged the power from the back, after a reboot that worked was & when reconnecting, I note ALL my data drive disappeared. No matter what I do with the power, I shouldn't be able to have this catastrophic failure.

  If I go to Volumes, it shows the volume, with a red dot in the upper left, with the data and free are two 0.

  also a ball - please remove inactive volumes in order to use the drive. Disk #2.

  If I go to actions it says: no volume or USB drives. It is recommended to create a volume before you set up other...

  If I had 2 drives (copies of each other) would I still lost all of these data. It seems that the reliability of disc is not my main concern, but the speaker.

  I've never had a pc lose all his data by car, make it look training crashed as the s/w me invites to use it. It looks like the o/s meta data, manage the contents of the disk are broken down.

  Is this code issues I may be courses?

  You have the USB key with the encryption key connected to the NAS Server? The key must be plugged to the volume mounted power.

  Looks like you will need to contact support.

• Volume icon disappeared from my system tray, and the option is grayed out (don't let me check it out) in the taskbar and start menu properties screen /Notification

  I don't know how to recover my volume icon - can anyone help?  Thank you!

  Hello

  If one of the system icons is out, you can reactivate the as follows:

  Right-click on the taskbar and select Properties. This will bring up the tab "properties of menu taskbar and start. It's where you mentioned, it is gray. It is very well...  From there, you can click on Customize button in the icon section. Look for the icon that you are missing, and check the status. The type of report should read "Hide icon and notifications", change that to "Show icon and notifications".

  If this does not resolve the issue most likely you have a problem with group policy on your machine. This can be corrected by following the instructions on the following link:

  http://www.mydigitallife.info/2009/01/01/fix-network-clock-volume-and-power-battery-system-icons-missing-with-disabled-or-grayed-out-check-box-options/

  Hope this helps,

  Steve <> Microsoft Partner