problem with esxcfg-volume on vMA 4.1

Similar Questions

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• Problem with the volume of a new 7 Slate

  I'll put up a new slate of 7 and I have a problem with the sound.  I have all the sliders to the max value, but any video or app plays at a very low volume on the builtin speakers. A trial has been with FIOS app that allows me to stream TV shows. I have to hold the Tablet so the speakers are right next to my ear to make the same concersations on the show and it's barely...

  Am I missing something?

  How to make your slate with audio files simply by using the application to play music?  And have you tried to play a trailer of the game of Google?  Type right on a movie title and play the trailer by typing on the > arrow.

  What if you use headphones?

  Do you have ear system sounds?  Go to settings > sounds > Touch seems to be there where there is a checkbox on the right whether Touch sounds are on or off.

  Speakers of slate are not all that, but they do not produce a sound that is strong enough to listen to the TV shows and movies.  If you can not enough volume of them with other applications such as the music plays, there may be a hardware problem.

  A few other suggestions... try to restart it.  And back to headphones, try inserting a headphone plug in all the way and disconnected.

  _
  As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the slate of 7 free of charge so I can better answer questions on the Forum.

• Problems with fluctuating volume of Windows Media Player

  After that I transferred MP3/WAV files to my old laptop which has Vista... for my new laptop which has Windows 7, my windows media player then started acting crazy during playback of music files.  The volume goes up and down, and during parties strong songs, it goes almost silent... with a few songs, it becomes just as hard very quickly and then just cut all together.  I tried tools audio fix from microsoft, and they were unable to help him.  Basically, it sounds like when you listen to music, and you would simply continue to cupping your ears again and again, as you can imagine is really annoying while you try to listen to music

  Try the following steps, presented by another poster, JoeyNice:

  6 steps that have helped me with this problem:

  (After looking at a few ideas from there I went and did my own investigation and arrested next steps the boring windows media player playback sound fluctuations)

  (1.) start the media player and go into menu improvements in media player andreset all default media player improvements and disable all improvements and equalizer, etc...

  (2.) do right click the speaker volume icon (located in the lower right corner of windows in the area of programs/notification bar) then andclick 'sounds' in the right click menu (or if "speaker" icon is not in the notification bar go to control panel and click on 'sounds')

  (3.) in the sounds of communications click menu tab and select 'status quo '.
  
  4.) , while on the sounds tab menu click play, and then click speakers allowing you to then click on properties
  
  5.) in the sounds-> speakers menu properties go to improvements and select 'Disable all sound effects'

  6.) while in the sounds-> speakers menu properties go to the Advanced tab and "restore default settings" , then click on apply and then OK and then apply and ok again and the sound menu

  These steps allowed me to be able to go to windows media player and listen to music with no fluctations (and you can now be able to turn on the equalizer again if you want to make adjustments, but if this causes the fluctuation back just turn Equalizer back off.) I could turn it back on after you follow the steps above with no fluctuation)

  Let us know if this suggestion helps with your problem of fluctuating volume.

  Sincerely,

  Marilyn

• Pavilion dv6-2124el: problem with the volume key

  Hello
  
  I wanted to know if someone could help me with this question: I have just formatted my laptop and installed Win7 HP 64 bit computer and I can not anymore in order to visualize the volume HP bar on the screen. I tried to install HP Quick Play, quick launch buttons and touch fast, but it does not work. Maybe I installed wrong version? Maybe I missed another driver/software?
  
  How can I solve this problem?
  
  Thanks for reading it.

  Hello

  For your particular laptop volume on the display screen is provided by HP MediaSmart SmartMenu on the following link.  Note:  Make sure that you have installed at least 1 other MediaSmart software before installing this.

  HP MediaSmart SmartMenu

  After the installation is complete, restart the laptop.

  Kind regards

  DP - K

• BlackBerry Z10 problems with video VOlUmE

  My videos don't seen to have the volume on my blackberry. I habe a bunch and none of them have.  also, I sent a couple and they had no picture. they were sent on wifi. does anyone else have this problem?

  I don't know what the problem was but I pulled the battery and rebooted the phone and it works fine now. Thanks for help. The video was the one who was shot with the phone, so he would have to play very well. He does now.

• Problem with double volume ID

  I have this little block of code that passes through each disk and assigns to thin provisioned when setting up the job specification.

  if (_vmThinProvision)
  {
      ConverterStorageParamsManagedTargetDiskParams targetDiskParams = new ConverterStorageParamsManagedTargetDiskParams();
      converterStorageParams.targetDiskParams = new ConverterStorageParamsTargetDiskParams[_computerInfo.hardwareInfo.storage.disk.Length];
      for (int diskCount = 0; diskCount < _computerInfo.hardwareInfo.storage.disk.Length; diskCount++)
      {
          targetDiskParams.sourceDiskId = _computerInfo.hardwareInfo.storage.disk[diskCount].diskId;
          Console.WriteLine(targetDiskParams.sourceDiskId);
          targetDiskParams.diskType = "vmfsMonolithicFlatThinProvisioned";
          targetDiskParams.datastoreName = _vmDatastoreName;
          converterStorageParams.targetDiskParams[diskCount] = targetDiskParams;
       }
  }
  

  Lets take an example where a system has 3 disks. In the code above, if I just set up each drive manually instead of having in a loop (same exact code, just to get out of the loop and hardcode the array index), it works fine. Each disk and volume gets its own ID and conversion works correctly.

  For some reason when I implement the loop, it seems to take the same disc 3 times instead of 3 different discs and, as would be expected, confuses the heck out of the VSS service. See the changelog below from the source system.

  2012-02-22T10:03:54.782-05:00 [05180 info 'task-29'] CloneTask::SetupTask
  2012-02-22T10:03:54.782-05:00 [05180 info 'task-29'] CloneTask::InitializeSourceComputer
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CreateSubTasks: Creating SingleVolumeCloneTask subtask with used space of 122512128512 bytes and a contribution percentage of 33
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CreateSubTasks: Creating SingleVolumeCloneTask subtask with used space of 122512128512 bytes and a contribution percentage of 33
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CreateSubTasks: Creating SingleVolumeCloneTask subtask with used space of 122512128512 bytes and a contribution percentage of 33
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] SingleVolumeCloneTask: estimated time to clone volume [\WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]] in seconds = 6074
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] SingleVolumeCloneTask: estimated time to clone volume [\WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]] in seconds = 6074
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] SingleVolumeCloneTask: estimated time to clone volume [\WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]] in seconds = 6074
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] CloneTask::InitializeTargetComputer
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] CloneTask updates, state: 1, percentage: 0, xfer rate (Bps): <unknown>
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::StartNextTrackingBitmap: no bitmap ID specified for the next cloning iteration, will not track changes
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::IsSnapshottingRequested: source volume snapshotting was  requested
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CollectVolumeIdsToSnapshot: we will try to snapshot volume \WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CollectVolumeIdsToSnapshot: we will try to snapshot volume \WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CollectVolumeIdsToSnapshot: we will try to snapshot volume \WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]
  2012-02-22T10:03:56.173-05:00 [05180 error 'task-29'] Converter::AtomicVssVolumeSnapshotSet::CreateSnapshotSet: VSS snapshot failed: Unable to create a snapshot for volume \\.\Volume{db72d0dc-4b08-11de-abf5-002219c7d318}, \\.\Volume{db72d0dc-4b08-11de-abf5-002219c7d318}, \\.\Volume{db72d0dc-4b08-11de-abf5-002219c7d318}. Error code 2147754765 (0x8004230D)
  

  You noticed I put a little console.writeline here to show me the code. They are different at this time. Sometimes between it and the submission of work deal with the GET IDs all rigged to the top.

  Yet once, if I just take the loop and the hard-coding the index, it works fine. Any ideas? It has really puzzled me.

  Thank you

  You need to move

  ConverterStorageParamsManagedTargetDiskParams targetDiskParams = new ConverterStorageParamsManagedTargetDiskParams();
  

  inside the loop. You need a new instance for each disc. With the current implementation, you don't have that one instance and several references to it, in order to update the instance updates "everywhere" it is referenced.

• Problem with call volume

  Whenever I've make or receive a call back automatically to very low. Any volume is the phone, I could make a call to adjust the volume up. Make another call, and it remains low. So low you can barely hear anything whatsoever. It is quite frustrating. Any ideas?

  @mr_xzibit Some users on the forum reported that it is linked to facebook messenger (after having a call using this application).

• problem with a volume of disk in asm diskgroup.

  Hi all
  
  When I run a command.
  
  Select mount_status, mode_status, road to v$ asm_disk;
  
  I'm getting
  for disk_number 2 AS mount_status, mode_status as offline and there is no entry in the path column.
  
  
  Please let me know the solution to do this, iwant to do is normal.
  
  Published by: varun4dba on November 8, 2010 12:55

  Hello

  http://download.Oracle.com/docs/CD/B14117_01/server.101/b10755/dynviews_1018.htm

  Thank you

• Equium P300-16 t - problem with volume wheel

  Equium P300-16 t
  just installed windows 7 64-bit

  having problems with the volume dial if I try and adjust the volume using wheels he iratic even if I click on the speaker in the taskbar.
  If I open ie Notepad and wheel is the round automatically shows "cccbccbcc".

  BIOS update
  Installed hardware 3.0.1.0
  Pretty 4.98.6.61
  Value Added Package 1.2.40
  Reg Patch 1.2

  Hello

  Have you noticed the same problem on Windows preinstalled (Vista?) too much or only on Windows 7?

• Satellite Pro P300 - problem with volume control

  Hello

  I have a problem with my volume control. He worked for the first two months of use value, but now refuses to lower the sound.
  He sort of stutters and actually transforms the sound upward when you turn, he 'left' to drop.

  I markets DEAMS it is a digital control and therefore is not a point 'end' like other laptops. I also noticed others are experieicing this problem.

  Is there a solution to this problem? I don't really like having to manually click on the volume control in the status bar on the window in order to be able to turn the laptop down. Maybe someone can help me?

  Thanks in advance.
  Sam

  Hello

  In your case, I recommend reinstalling the audio driver and controls (with Win XP) Toshiba or Toshiba VAP (if Vista is installed).
  In addition, you should check if the BIOS can be updated too.

  Sorry for this suggestion, but in my opinion that the question must be related software and the fact is that driver sound and the VAP multimedia button controls and the sound card.

  It of certainly worth a try

• Problems with volume on a Windows 7 laptop

  Hi, I have a laptop with windows 7 installed and I have a problem with my volume control.

  My volume control acts as if someone or something has been pressed. For example I click on the icon to open the volume control and it shows that the volume is down. When I click and try to drag the control to the top, it will go up but immediately down as if someone he had the opposite effect. I tried to fix this on my computer nothing works. I tried to see if it has changed when I plugged my headphones but I always had the same problem. Open the volume mixer or enter the system of sounds does nothing either. I was wondering if anyone has had this problem before? I have never seen anything like this myself.

  See you soon.

  Have a read of this (rather long) post of similar sounding and see if the work of suggested corrections - http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/my-volume-slider-under-windows-7-keeps-going-down/2769853f-e412-4c4d-8b55-6885588a528f as some of the mentioned patches seem to have helped others. It seems quite a few possible interactions of audio RealTek to Audacity to Skype Manager, etc. and their related settings.

  Hope this helps, if not, I'm sure that someone will bring a possible solution.

• My laptop has no sound? one day he turned suddenly silent and I can't find a problem with the drivers to fix

  No sound

  all the drivers r correct work n

  Hello Mohamed Ali,

  1. don't you make changes to the computer until the problem occurred?

  You can try the methods below to resolve this issue.

  Method 1:

  I suggest that you run the Audio troubleshooter on your Windows 7 computer, it looks for common problems with your volume settings, your sound card driver and your speakers or headset:

  Check out this link: http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter

  Method 2:

  Configure the playback devices from the default on your computer.

  a. Click Start, type Sound in the box to start the search.

  b. click sound in the results of search at the top of the start menu.

  c. click the Read tab.

  d. on the tab 'Read' it has listed the sound options at your disposal.

  e. Select the default playback device (the playback device will be the audio adapter on your computer)

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Skype usage error: problem with playback device

  Original title: Skype.

  I'm calling by Skype and it is written that I have a problem with "currency of reading".

  What should I do?

  Hello

  ·         Audio devices work otherwise?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Step 1: Launch the audio troubleshooter. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also refer to the support of Skype.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problems with volume on pc

  I can't get my volume to work on my pc, I've checked everything and don't know what to do d

  Hello

  1. are you having a problem with the sound on all applications?

  2 have you made any changes to the computer before the show?

  You can try the troubleshooting provided in the link below steps to fix the problem.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows