Toshiba with vista touchpad mouse stopped working after the long sleep.

Similar Questions

• The mouse stop working after the installation of updates

  Have Windows Vista on laptop. Important Windows Update installed today. Have not installed the optional updates. Restarted the computer. The mouse no longer works. Control Panel - mouse shows only Synaptics touchpad installed.  How to operate the mouse?

  Hello

  1. what day you're talking about?

  2. What is the brand and model of the mouse?

  3 have you tried any other mouse to connect to the computer of the question?

  4. have you tried to connect the mouse to any other computer?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Try to update the drivers mouse and chipset and check if it works very well.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• The functions of horizontal and vertical touchpad scrolling mouse stop working after the passage of the users.

  Restarting the computer solves the problem, but the problem occurs every time that I have change user.  Deactivation and reset the settings do not appear to address them.  Any suggestions?  Thank you!

  In addition, I note that demand, ApntEx.exe... too bad.  I had to put an end to this process and run it again.  Maybe this will help someone else.

  Now it's working.  I had to go to (ctrl + shift + ESC) Task Manager and end the process, ApntEx.exe.  Then I went to File-> new task (run...) and type "ApntEx.exe" in the box and press ENTER.

• Touchpad gestures stop working after sleep Windows *.

  This is the best advice ever! I tried and immediately was saved! Thank you!!

  For laptops Asus on Windows 8 - actions no longer work after sleep on touchpad
  

  
  

  Manual method

  • Open the Task Manager, look for the "Asus Smart gesture Center" process Complete the task.

  Script method

  • Script: Create a .bat somewhere file with the following code:
    Taskkill /IM AsusTPCenter.exe /F

  When you run the bat file, it will kill the process.

  Both: when to end the task, that it seems that the other process from Asus running it will detect it and start it, allowing the multi-doigt touch again.

  To make the batch file:

  1. Open Notepad and copy/past this command:Taskkill /IM AsusTPCenter.exe /F
  2. Then click on save as and type .bat (remove .txt)
  3. Replace all files . the drop-down list and click Save

  That's all! Whenever the problem appears, double-click the file and it will fix it!

  Thanks to Teknokraten @ superuser.com for this solution.

  I am so grateful for your help! I had the same problem that my touchpad stop working after the mode 'sleep'. I had the problem over the years and no one could help me. And it worked! So thank you very much!

• The mouse stops working after a few minutes

  Original title: my USB mouse ch

  My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?

  Hi Ann Juel,

  1. what happens when you connect the USB mouse to the computer? You get the error message?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. What is the operating system installed on the computer?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can connect the mouse to another computer and check. Also perform the methods provided.

  Also, try a different USB port and check.

  Method 2:

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Response with status so that we can help you.

• My mouse stops working after 30 minutes of inactivity. How can I fix this without having to reboot my PC?

  original title: MY MOUSE STOPS WORKING AFTER PC IS IDEAL for 30 minutes. How can I fix this without having to reboot my pc

  I hang the mouse up to the wrong computer

  Suggestions:

  1. If you use a wireless mouse, check the battery.

  2. use a different mouse and see if you have the same problem in the SAME conditions (idle for 30 minutes). If you have not, then your mouse may be defective.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• The IntelliMouse Explorer 3.0 USB mouse stops working (after ding dong)

  It seems that after an update of my optical mouse USB freeze (there's a ding dong) and then stops working and the Red led on the mouse turns off.

  The mouse is a PIN to USB Intellimouse Explorer 3.0 X 06 25120 PID 55249-576-4441001 - 0 - 3901; the operating system is XP.  I downloaded the drivers for the mouse from microsoft site (IPx86 - 1033_8.15.406.0) and re-installed readers. The problem persists.
  I can unplug it, then plug in USB and it will work for a short time, and then it freezes again
  Please advise me on measure to correct

  Hi JimBrowne,

  1 update you tried to install?

  You can check the updates that are installed recently.

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  You can try to perform a restore of the system to a restore point before you have been affected by the problem or the update has been installed and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  How to restore Windows XP to a previous state

  For more information, you can also consult the following link:

  Keyboard and mouse stops responding when you upgrade to Windows XP

  Hope this information is useful.

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• Satellite L855 and Win8.1 - Touchpad stops working after the login window

  New laptop running windows 8.1 Touchpad works for about 30 seconds after windows starts and then stops. I have tried downloading drivers the most recent of the Toshiba site, but it does not solve the problem. Tried the function keys of the touchpad, but it's not the question. Called Toshiba support and they suggest to send it in for a factory reset.

  I have also a problem with AMD graphics will split after that computer screen goes into sleep state. Downloaded and installed drivers more recent for it on the advice of Tech support, but not fixed, or the other.

  I'm a little worried because a research shows these two problems are not uncommon and IV ' e spent a lot of time to copy data and install the software, don't want to lose him and wasting time waiting for factory reset if I need to return ot.

  Anyone have any ideas?

  Factory reset is the best way to solve this problem, but you have upgraded your machine following the instructions step by step http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• USB mouse stopped working after system update

  I'm running Windows 8 here and it updates automatic system has run and disabled use my connected USB mouse (manufacturer: Targus | model: AMU4201EUK)

  When I search the drivers in Device Manager tells me I'm using the latest drivers available and can't seem to find a driver for this specific mouse online.

  I use an external keyboard connected via USB and works without problem so I'm lost as to why the mouse would stop working. He able to go to the mouse as the LED inside turns on when it is plugged. Windows made his usual sounds when its connected and disconnected from.

  This happened last week and to work around, I restored windows since the eve of the update and it worked without problem. Windows tries to install the updates again after a few days, then the mouse will become unusable. I've lost the ability to return to this State, now I'm sure that Windows has replaced something in this update.

  The mouse uses of Microsofts HID drivers that are up to date and I confirmed the mouse works on other systems and on my laptop USB ports are functioning normally.

  Any suggestion is appreciated.

  See this similar post semi for some additional options open to you.

  After update, windows 8 pro will not be closed or sleep with connect to internet
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/after-update-Windows-8-Pro-wont-shut-down-or-sleep/24bdbd5a-AEEE-4ADB-B470-7ef5685acb99

  Have you had a look in Device Manager for errors with USB devices?

  Use the Device Manager and uninstall the concentrators root USB and devices which show now on your machine.  Restart and let XP rediscover and see if that solves your problem.

  If you uninstall the mouse in Device Manager, then reboot, Windows should find the mouse and install the appropriate drivers.

  Uninstall or reinstall a device
  http://TechNet.Microsoft.com/en-us/library/cc725782.aspx

• DNS stopped working after the latest Vista updates

  Yesterday my Vista Home Premium has been updated by Microsoft through the automatic update process. After the update and reboot network stopped working. I was able to trace this DNS no longer works. I was unable to solve the problem until I supported updates, after which the system returns to normal operation.

  Now, of course, updates want to be reinstalled, but I don't want the network to fail again. Any ideas?

  Change how to get updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

  Right click on those you don't need > UAC prompt > it hide.

  Never install party hardware driver updates 3rd through Windows updates.

  Go to the manufacturer's website, instead.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  See you soon.

  Mick Murphy - Microsoft partner

• access keys stopped working after the upgrade from vista to windows 7 Professional,

  keyboard shortcuts no longer works after upgrading vista to windows 7 Professional, I have a desktop hp, 64 bit, and use of wireless, my keys, i.e. hot keyboard.  have been, key, key club hp, search key email, help key, eject the dvd buttons, stop, play, etc. before keys do not work, THE VOLUME BUTTON SLEEP MODE KEY ŒUVRES WELL, Please HELP, HP AND MICROSOFT will not HELP ME, ILS ARE SAYING what CALL HP, HP SAID CALL MICROSOFT, SO No. MORE MICROSOFT or HP for ME ANYMORE ITS APPLE MAC TIMES, THANKS IN ADVANCE

  You need a version of Windows 7, the keyboard drivers for your HP computer model.  Go to Support & drivers HP to start site. Boulder computer Maven
  Most Microsoft Valuable Professional