Click the event Script has stopped working. Help, please!

Similar Questions

• Microphone has stopped working - HELP, please!

  Hello.

  My plug-in headset and regular lapel microphone suddenly stopped working.  It was working before and I know that my helmet or conventional microphone are not broken.

  I noticed this problem when I would go to a Voice Chat room and trying to talk into the microphone, the volume bar would move only a little bit and not much.

  I checked all my settings of volume and nothing is low in the volume bar of the Realtek High Definition Audio, or the DD Realtek Audio Manager.  Everything is fine and when I lifted up the microphone, he is selected by default and indicates that it works correctly, but the sound does not come through.

  I am running Windows Vista Home Premium, my helmet is called Dynex, my plug in microphones are called Plantronics and the other on my Logitech webcam.  Help, please.

  ~ Marynonimous

  P.S. I also went to my menu of BIOS and changed my setting audio on-board car Enabled to disabled, and then back to Enabled, and this still does not work.

  P.P.S. My speakers work fine.  I hear people speaking from the voice chat rooms and hear the sounds of my computer.  I hear them on my helmet and my speakers when I unplug my headphones, so my speakers are absolutely perfect.

  Well, I don't have the connected headset on the helmet correctly.  I fixed it.  Thank you.  I'm sorry.  Thank you.  God bless you all.  Love and prayers to Jesus.

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

  Original title: left click not working not not on HP laptop

  On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

  Hi cyrilmillot,

  You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

  See the link to Adobe to download the removal tool:

  Adobe Reader/Acrobat removal tool

  After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

  Adobe forums

  http://helpx.Adobe.com/support/

  If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

  HP support

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

• The radial filter has stopped working properly and I need help.

  The radial filter has stopped working properly.

  When I turn it on and say change the exposure, the effect occurs

  But there is no way I can control the size or shape because no border will appear some that I'm working "blind".
  

  With the active filter, press the H key to hide or reveal the tool.

• The program executable has stopped working

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with... of programs a SSC downloaded for smpt installation
  • Error messages. the program executable has stopped working... a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
  • Recent changes to your computer. None
  • What you have already tried to fix the problem.no I don't know what to do

  Confirmed that the program is compatible with your version of Vista and the hardware in your computer? http://www.microsoft.com/windows/compatibility/windows-vista/.

  You can try to uninstall the program, download a clean copy (in case where the original has been altered) and re - install the new download and then see if the program works.  If this does not help, try right-clicking on the executable and click on run as administrator and see if that makes a difference.

  I hope this helps.  If this isn't the case, follow the advice implied by Malke response and contact technical support by the manufacturer of software for assistance.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the profile service has stopped working

  For the last two weeks when I started my Studio Hybrid, I get the message "the profile service has stopped working".

  Most of the time I have to restart in safe mode and do a restore.
  McAffee said I'm sure as well as Windows Defender, and still I can't sign.
  What is happening all of a sudden?
  Thanks for any help you can provide.
  Ron

  Hello

  1. What is the error message or an exact error code?

  2. Since when are you facing this problem?

  3. have you made changes on the computer recently?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to start the service: the user's profile and check if it helps.

  Follow the steps to start the user profile service:

  a. click Start, type Services.msc in the search box and press enter.

  b. Locate the service: user profile Service.

  c. make a right click the service: user profile Service , and then click Start.

  Method 2:

  Run Microsoft Safety Scanner and check if it helps.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Method 3:

  Try to create a new user account and check if it helps.

  Create a user account: http://windows.microsoft.com/en-us/Windows7/Create-a-user-account

  Also read the following article to help of method 3.

  Copy files to a new user account: http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

  I hope that helps!

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• Why my Catalyst Center: the host application has stopped working?

  When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

  Hi Missy,

  This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

  This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh

• DSC - H3 works including fine arise of the Flash but the flash itself has stopped working?

  Hello

  My Sony DSC - H3 cybershot camera works fine with popping up the flash but the flash itself has stopped working. It appears, but no flash light. I checked all the settings are fine and its mode in which it should be flashing.

  The camera works perfectly fine, except for the flash is not working. It looks like a grilled "bulb". Could it be? Or is it something else?

  What can I do? Can you please help.

  Thank you very much

  Hi, my Sony cybershot camera DSC - H3 works fine with popping up the flash but the flash itself has stopped working. It appears, but no flash light. I checked all the settings are fine and its mode in which it should be flashing. The camera works perfectly fine, except for the flash is not working. It looks like a grilled "bulb". Could it be? Or is it something else? What can I do? Can you please help. Thank you very much

• The Windows Firewall has stopped working, 0x8007042c error code

  The Windows Firewall has stopped working.

  See if this helps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/firewall-will-not-turn-on/57a4cce5-835f-e011-8dfc-68b599b31bf5

• The delete button has stopped working in Outlook Express 6.

  Outlook express delete failed

  The delete button has stopped working in Outlook Express 6. Empty the file deletion was without help. How can I make it work again? Also I can't manually move an email in the folder to delete.  Any suggestions?

  Your deleted items folder is probably corrupted.  Close OE and delete the deleted items.dbx file.  OE will make a new and that should fix the problem.  Its a good time to save your messages if the records are get damaged.  You may lose all your messages.  See www.oehelp.com/OETips.aspx#6

  Steve

• "CatalystControlCentre: the host application has stopped working".

  I get this message when I boot: ' CatalystControlCentre: the host application has stopped working. . Caused A problem blocking the program works correctly. Windows will close the program and notify you if a solution is available. " This happened after I got malware and have since sent to quarantine. A / the result is that the wallpaper is gone replaced by a black screen. Some of the icons on the screen and the line along the bottom disappeared. How can I fix it? What I have to find and pay a professional to do it, or can I fix it myself?

  Hi Eagle-B

  
  Did you put the virus in quarantine?

   

  It seems that you still have the virus or malware present on the computer. I suggest you to contact the team of experts on the issue. Also, you can visit the Microsoft security essentials forum for assistance for the number and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/msescan/threads?filter=answered

   

  I hope this helps.

• the gadgets function has stopped working properly...

  the gadgets function has stopped working properly... those I had put a few weeks ago are still on the desktop... but it won't let me add, remove or access the Panel command or right-click gadgets... when I right click on the desktop and click gadgets, nothing happens... when I go into Control Panel and click on gadgets nothing happens... the addition of gadgets, uninstall gadgets and restore the gadgets links in the Control Panel does not work... nothing happens when I click on them... the only link that works is the "get more gadgets online"... and I re-download and reinstall a gadget to access the menu gadget... another while TI leaves me not go... What is happening I'm frustrated

  Scanner of CFS on the computer:
  http://support.Microsoft.com/kb/936212

  All the best!