Microphone has stopped working - HELP, please!

Similar Questions

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• I get a message 'Adobe Illustrator has stopped working. Please activate the fonts Verdana and r

  I get a message 'Adobe Illustrator has stopped working. Please activate the Verdana fonts and relaunch Illustrator. "I looked in my fonts and I do not have the fonts veranda. What I would do.

  You must install all four members of the family of Verdana fonts on your machine. Please check the following thread that corresponds to your question:

  http://forums.Adobe.com/message/5905430#5905430

  Kind regards

  Rambour

• "Windows Explorer has stopped working" - help!

  Running Vista HP, sp 2.

  Firewall on the router & McAfee.

  WE automatic updates of windows

  In the last two days, I get "Windows Explorer has stopped working" pretty constantly.  Not the kind of endless loop, just whenever I try to use it, it will give the errmsg, close, claim that it restarts and fail to do so.

  I've had a scout quick tour here for solutions and tried all that is obvious:

  (1) run the System File Checker (Nothing found)

  (2) run chkdsk (Nothing found)

  (3) installed and run a-squared (found nothing)

  (4) off the display of thumbnails (past again)

  (5) started in SafeMode (past again)

  FWIW, a few other applications have the same problem, for example Adobe Acrobat will crash all trying to save a file, to the point where it's the folder view.  And Acrobat and Windows Explorer are broken only if you try to display all drives on the computer.  If you start to US at a lower level, in 'my documents' therefore very well with what he shows you.  If you then scroll down to 'computer' and click to enlarge, this is the point where it crashes.

  However, other applications (such as Word) can access and save items to this level, for example I can save a word doc on my phone as another drive of the word itself, although if I tried to slide anywhere in US it would be crushed before I could even see the phone was there.

  My hunch is that it started with what seems to be a Windows Update absolutely unrelated to C++ security two days ago.  But it could be a complete diversion.

  Any ideas?  I'm reaching the end of my tether here.

  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
   
   
  --
  ..
  --
  "r3dh3d" wrote in message news: 04e82bbf-458f-48 CF-86e7-6a39480a4a9f...
  > Running Vista HP, sp 2.
  >
  > Firewall on the router & McAfee.
  >
  > Automatic windows updates WE
  >
  >
  >
  > In the last two days, I get "windows Explorer has."
  "> has stopped working" pretty constantly. Not the kind of endless loop, just
  > everytime I try to use it, it will give the errmsg, close, claim that it is
  > restart and fail to do so.
  >
  > I had a scout quick tour here and tried all solutions the
  > obvious:
  >
  > 1) run the checker of the filesystem (found nothing)
  >
  (> 2) run chkdsk (found nothing)
  >
  (> 3) installed and run anti-malware (Nothing found)
  >
  (> 4) turned off the display of thumbnails (past again)
  >
  (> 5) started in SafeMode (past again)
  >
  >
  >
  > Fwiw a few other applications have the same problem, for example Adobe Acrobat
  > will crash all trying to save a file, to the point where it is
  > View folders. And Acrobat and Explorer Windows is
  > crashing if you try to display all drives on the computer.
  > So if you start US at a lower level, in 'my documents' that's fine with
  > what it shows you. If you then scroll down to the bottom in 'computer' and click
  > to develop, this is the point where it crashes.
  >
  > However, other applications (such as Word) can access and save items to this level, for example
  > Can I save a word doc on my phone as another drive of the word itself.
  > Although if I tried to slide anywhere in US it would have crashed before I
  > couldn't even see the phone was there.
  >
  > My hunch is it started with what seems like two days a
  > totally unrelated to Windows update for the security of C++. But it could be a
  > complete red herring.
  >
  > Any ideas? I'm reaching the end of my tether here.
  >
   
   

• Dell Support Center has stopped working - HELP!

  I get a message on my screen saying that the Dell's Support Center has stopped working and we're looking for a solution.

  I think something happened to this software, but I'm not knowledgeable enough to be able to make it out for me.

  I tried to center of Dell Support from the Start Menu.  The logo appears but nothing else happens.

  What should I do to get it working again?

  Hello

  I had the same problem. Read everything above,

  Tried all of the suggested fixes, but the problem remains still.

  Just before the end of the installation, I got the same message, that is to say:

  "Error getting cert filename (property: Custom Action Data) of MSI.

  As I find it very useful, I was determined to get it back, so...

  I looked in my PROGRAM directory for any sign of Dell Support Center and therein, a subdirectory for "Dell Support Center.

  There were two points in there, or an uninstall program.

  I just remove the entire subdirectory "Dell Support Center", thinking to allow the installation program again.

  then deleted the downloaded "aulauncher" (installation app for Dell Support Center).

  then restarted the pc.

  Then I followed the link to download Dell Support Center of DELL again, the website downloaded, ran it, REBOOTED and all is now ok with my world. :-)

  I hope this helps.

• Start a new game in Fallout 3 (fallout 3 has stopped working) help!

  I have windows 7 Home Edition premium, I just downloaded fallout 3 out of gamestop. I was happy to play so I booted up and when I start a new game it goes to the loading each time, screen and then hangs. It is for me a window saying fallout 3 has stopped working... I would appreciate an answer I'd like to play this game.

  Hey everybody.  It took me awhile to find the answer to this one.  Recently, I upgraded my laptop older to a new 64 bit Windows 7 OS kernel based Dell I7.  I reinstalled my copy of the edition of Fallout 3 GOY, and it would crash at startup, as soon as I clicked on 'new game '.  Finally after reading hundreds of posts on Fallout 3 crash, I came across this video which showed me the you tube fix. http://www.YouTube.com/watch?v=4GN5HbMsMVE  Basically, the original Fallout 3 (Fallout 3 GOY edition and) does not contain the d3d9.dll file in the directory of Fallout 3.  Download this dll and put it in the directory of Fallout 3 corrected it for me instantly.

  I hope that helps!

• "License for this product has stopped working" - help

  I use Adobe Dreamweaver CS3 for Mac OS X. Last week my computer crashed. I now have a new hard drive, and most of my data was restored.

  However, when I try to run Dreamweaver I get a message: "license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product... »

  Perhaps foolishly, I had never bypassed to the recording of Dreamweaver (despite periodic reminders), even if I use a legal copy, bought in the store with its own serial number, and I guess that's the reason why I now get this message.

  I'm not a computer whizz-kid and nervous about what to do next, as I would not lose data or parameters.

  Exactly how do we uninstall Dreamweaver? And when I reinstall I'm still currently having all my existing sites intact, as they were before?

  Any guidance would be most welcome.

  Thank you.

  Dreamweaver CS3 uses the old system of licenses, which really blows. Licensing for CS3 applications on my computer stopped working several times, and each time, it is a task to an hour to get it up and running again.

  You will need to download the licensing repair utility for your system (Windows or Macintosh).

  Delete / {boot disk Volume} / Library/Preferences/FLEXnet Publisher, via the operating system or the Terminal.

  Run the "LicenseRecoveryLauncher" script provided by Adobe. When the opportunity to work normally (entry) or remove (0), press ENTER to run normally.

  Reactivate your software.

  You will need your serial number of product very convenient.

• Satellite A350-20s - built-in microphone has stopped working

  Hello

  I was wondering if someone could help me? My mic has suddenly stopped working. I was away for two weeks and when I tried to use the microphone it no longer works. It was working perfectly before.

  When I go into Control Panel and watch settings for the microphone, he said his assets. I also installed the volume on the microphone and checked if everything is muted. But as far as I could see everything fine.

  If I test the microphone the sound bar still gray and the microphone is not any sound recording. I tried a few of the instructions I found online, but nothing helped.
  I mainly use the microphone on web with Skype calls.

  It is a very frustrating problem. I hope someone can help me. Thanks in advance.

  Hello

  The built-in microphone is the webcam and is a part of it. Which means it would be recommended to reinstall the driver for the webcam. You can download the driver for the webcam on Toshiba website for your laptop.

  Can send you additional information about your operating system? You use the preinstalled operating system from Toshiba or did you do your own installation of Windows?

• Satellite P200 - Microphone has stopped working after installing Windows 7

  My Satellite P200 came with Vista Ultimate, the mic has worked for a few months, all of a sudden it stopped. I decided to install Windows 7, but the microphone still does not work.
  Any ideas anyone?

  I use this laptop for skpe my people a lot. I can use an external mic very well, but really want my only integrated works again.

  Hey Buddy,

  Sounds like there of something wrong with your installation of Windows 7 so the microphone doesn t work anymore...

  I recommend updating the driver of the webcam, because the microphone is a part of it. You can find updates driver here:
  http://EU.computers.Toshiba-Europe.com

  I put t know what Satellite P200 you have exactly, but if you can t find a driver Windows 7 for webcam, choose another model which is fully Windows 7 taken in charge, e.g. by Satellite P300.

• On the LX-3000 LifeChat microphone has stopped working.

  I bought this helmet a month ago, and it worked perfectly until I unplugged and plugged in.
  I hear more audio very well on it, but the microphone stops working.
  I have restarted my computer several times and tried to start up in safe boot mode but nothing helped.
  The microphone is the default and the mute button is not lit.

  Thanks in advance for the help.

  Hello
   
  It seems that the microphone settings are changed. We recommend that you to the first cross of check if the settings are correct.
  Step 1: To do this, try the following steps.
  1. click on the volume in the taskbar icon.
  2. click on mix.
  3. click on Microphone, then check if the settings are correct.
   
  Step 2: If the problem persists, try to set up micro once more and check the result.
  1. make sure the microphone and speakers are well connected to your computer.
  2. Open Options speech recognition by clicking the Start button, clicking Control Panel, on ease of access, and then clicking Speech Recognition Options.
  3. click on Configure microphone.
  4. follow the directions in the wizard.
   
  For more information, see these links.
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-microphone-for-speech-recognition
  http://www.Microsoft.com/enable/training/windowsvista/srmic.aspx
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• T-410 microphone has stopped working

  About a week after that my T-410 has been delivered, the microphones stopped working.

  When I go into the control panel to check the device, it says there is no device. There is no device driver listed in the Manager of devices for the microphone (just the Bluetooth and the speakers). When I press the set button muting the microphone, he would light up.

  (BTW, I'm slot than Win7 64-bit.)

  Lenovo has replaced the motherboard, but this does not solve the problem. Lenovo has replaced the LCD Board where the microphone. This does not solve the problem.

  Lenovo is now proposing that the solution to the problem is to just reformat the hard drive and reinstall the operating system. (Upon hearing this I had one moment of nostalgic, since it is of the opinion I and other regularly received 15 years of incompetent technicians when laptops were something new and had 20 megabyte readers.) According to them, that there was three other instances of the T410s with this problem. From a troubleshooting perspective, I guess that makes sense since it doesn't seem to be an obvious physical problem.

  However, given that the resettlement process and reconfigure the software and data on my laptop will take me almost two days, I would avoid this step if possible. Someone there an idea for fixing this problem to have to start from scratch with a new build of OS/HD? Is it possible to install the microphone on its own device driver?

  Thanks in advance.

  Try to install the sound drivers on the existing drivers.
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74380

• Microphone has stopped working in Vista - any suggestions welcome!

  Oddly enough my microphone stopped working on the laptop. It works fine on the desktop in XP, but when it worked yesterday today it isn't. Has anyone else had a similar problem? And or the sorting?

  Thank you

  
  

• Dell local security backup has stpped working help please

  I tried to connect to a new website, I am trying to build, using my laptop instead of the family computer. It was because I had access a.net framework of problem a few days ago. So, I got the message that the Dell data safe local backup stopped working.  And to communicate with Windows. I was directed to do my own research through some links, including this forum. I would be grateful if someone can help me solve this problem. Thank you.

  Hello

  If you have problems with "Dell DataSafe Local Backup" so you will have to contact Dell.

  It is their software:

  "What is Dell DataSafe Local Backup 2.0?"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266281

  You can try their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Host Service for Windows has stopped working - Help!

  Hello
  the last two days that I had problems when I start my computer.
  When it starts, it cannot connect to the internet & will not answer what it is (for example, if I click on 'my documents', it will not open).

  I have to restart my computer. When it re - start, it works normally.

  This is the message I get from the section 'reliability & history problem ":

  The service host for windows, stopped working

  Description:
  Application of vulnerabilities path: C:\Windows\System32\svchost.exe
  Signature of the problem
  Problem event name: APPCRASH
  Application name: svchost.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc100
  Fault Module name: ntdll.dll
  Fault Module Version: 6.1.7601.18247
  Timestamp of Module error: 521ea91c
  Exception code: c0000005
  Exception offset: 00052d 94
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2057
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Additional information about the problem
  Bucket ID: 3883285962

  Can someone help me with this problem?
  Thanks in advance

  Hello Mark,

  Thanks for the reply.

  And I apologize for the inconvenience.

  You can try to proceed with the clean boot follow the link below and see if that helps.

  How to perform the clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  I hope this helps. Otherwise, feel free to write us back with the results and we will be happy to help you.

• Creative Cloud Setup has stopped working. Please close the program.

  HELP PLEASE! I'VE USED THE CLEANING TOOL, IT STILL DOES NOT WORK!

  Follow the procedure below and check:

  Basic Checklist: [optional]

  Make sure that Adobe Creative Cloud is not listed in the control panel. If the list delete.

  You can use Microsoft Fix tool to remove.  If Adobe Creative Cloud is listed.

  http://go.Microsoft.com/?linkid=9779673

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  If you are unable to remove, simply rename it to Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4)

  
  

  Temporarily disable anti-virus and firewall.
  

  
  

  Step 5)

  Click on the link below and download Adobe Application manager and install the same:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Once the installation is complete, look for the icon of Adobe Application Manager launch on desktop and double-click it.

  It will start the update process. and he should get updated to Adobe Creative Cloud app.