'Click to edit all the properties' does not not in Dreamweaver CC for padding/margins
Whenever I try to use the option "Click to change all the properties" in Dreamweaver CM³ (the link icon of string in the middle of the box of Magin/Padding), it never seems to work. Or should I use the abbreviation CSS, it lists, up, down, left and right margins/padding separately no matter if I have the chain linked or broken link icon. If I set it up to connect the four sides, and enter a value in the top, nothing happens on the other sides. It's not until I enter a value towards the bottom it auto fills in the other two sides. Anyone else having this problem?
I am unable to reproduce the problem where the link in the chain does not update the 4 values all. This works well for me.
As for the formula of stenography, there's a preference setting that is probably unchecked?
Go to Dreamweaver-> preferences on a Mac or Edition-> Preferences Windows and go to the section of CSS Styles. If the check box for margin and padding is defined, then you will get a code shortcut otherwise it will not.
HTH,
Nithya
Tags: Dreamweaver
Similar Questions
-
The shortcut of the comics 'Create all the constants' cannot create a constant to a control when it is mixed with flags:
Colors of the palette is a table control, the other two are indicators.
results in:
With the help of the 'constant to create' (which is something else altogether) works very well with the table control (of course, the constant is not connected to the Terminal in this case).
Tested in LV 2016 64 bit on Windows 7
You can change the functionality of the right click plugin by opening the Terminals_core.vi all the wires in the .llb following and by removing the structure of matter on the image below (keep remove it just method the structure around him). He did what you wanted in the original post, but is not very useful when you start to use it on items with multiple terminals (especially multiple output terminals). The code makes it seem quite expected, he travels all terminals it concludes and checks whether it is an input or output terminal. If it's an entry, it creates a constant, if it is an output, it does nothing. The change that I did just creates a constant whether it is an input or output.
time Board \resource\plugins\PopupMenus\edit and diagram\Wire all Terminals.llb Unwired -
After the closure of full concert screen in edit mode, the interface does not
If I create a new concert, or open an existing one and I full screen it in edit mode, when I close and I'm back to the main menu, I can't interact with the interface; It does not. I can't click on anything, the menu bar does not work, the 'Choose' button flashes, but when I click it, nothing happens. The only way to get the application to work is to right click on the dock icon and click "exit". So, when I reopen it, I let the same windowed concert and close, this isn't a problem. Everyone knows this?
I encounter the same problem on my MacBook Pro 2013.
Version 3.2.4 (on both machines)
I would add that if I restore the concert before closing, I don't have this problem and I can communicate normally with the menu that appears after the closing concert.
-
Built-in video .mov - followed all the steps - does not!
I followed the steps, and it does not work.
I chose the space where I want. Click on "Insert" 'media' "plugin". Chose my my folder of root media – things .mov video has been good for me.
Change the width and height properties. There's a nice empty box on the page!
I don't know exactly what needs to go in the Url. space (in properties).
A website says - http://www.apple.com/quicktime. for users who do not have no - one another linked to a web page that I didn't.
It is a Windows .mov file, so I guess that it doesn't have the mark of the Web - Please correct me if I'm wrong.
Can we see what the problem is. PPL make it look so easy - follow the steps and it plays just - brilliant! -Why NOT FOR ME?
Thank you 1 million.
Unfortunately, my instructor - specified, exactly: no copy and paste the code in and not to use flash, but specifically using a plug-in (not not a joke).
I think that your instructor could use a refresher course. Nobody uses more player plugins. HTML5 video is so much better for it.
Share these links with your instructor:
Using Dreamweaver | Insert HTML5 video
Good luck with your course!
Nancy O.
-
Portege M400: click right button on the pen does not work
Hello
I can't button right-click on the barrel of the pen to work with my new Portege M400 tablet PC. I tried with the option 'Use the stylus buton click-right' in the 'Pen settings' tab 'settings in Tablet and stylus' dialog checked and unchecked, but none worked.
Is the stylus defective, or worse still the computer? Or can anyone suggest how to operate?
Thank you
Toby
PS: "pen" should be "nep" reversed in option, tab and dialog names above, but the silent filter profanity does not accept the word "nep" (reverse).
Hello
You have this problem since the first day? Please remember that the pen is not in a very long distance from the screen. As you know if the distance is too great the pen will not work as usual.
-
Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.
I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?
Thank you.
The afflicted system has a working CD/DVD drive (even an external).
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.
Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again. You have tried them all!
The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.
If this is the case, you must call Options menu advanced boot yourself until you do not see the option:
Disable the automatic restart in the event of system failure
When you get the XP Advanced Options correct start menu, it has options on it like these:
Safe mode
Safe mode with networking
Safe mode with command promptEnable Boot logging
Enable VGA mode
Last good Configuration known (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debug mode
Disable the automatic restart in the event of system failureStart Windows normally
Reset
Return to OS Choices MenuYou need to choose in this menu is the option:
Disable the automatic restart in the event of system failure
Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.
If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.
You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.
Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
(All the choices) does not work online dashboard
Hello
I created a line of dashboard with drop-down control using SQL result. Now, when I run it, I noticed that when (all choices) is selected in the drop-down list, this does not work, but if an item is selected, it works fine...
Help please...
Thanks in advance :)Hello
check once this post... [http://108obiee.blogspot.com/2009/04/detecting-all-choices-from-dashboard.html]
Thinks he can help you.
KR,
A -
I click on "Write" but the mail does not open outside the widow icon on the taskbar.
Thunderbird Version 31.0 worked fine then suddenly every time I click on 'write' or 'response' nothing opens but the icon on the toolbar. I can still receive emails and open them, but I can't write or send emails. I rebooted Thunderbird but it stays the same. What should I do to return to normal service?
Which; new good s.
now, you have to restart thunderbird, then go to tools > Addons
Clear all the addons, and then activate one at a time to see if the error occurs. This will tell you which add-on is causing the problem.Maybe the addon should update.
-
Qosmio F55 all the usb does not
Hello
My qosmio's old 1y, 1 week ago any port usb stop working, mouse, printer, etc. E - SATA is ok, but wen I conect usb-same problem.
I put the express card slot usb hub, even. It is common in usb, bicose its mi phone recharge, but said peripheral usb not recognized.So I'm updating the bios, chipset, all the drivers and reinstal windows vista, then I put windows 7, even I open it and I try to find CMOS batery to reset, but I don't the have not found
I remove all the usb Manager divides and restart. evenPlease guys I need help
tanksHello
You said that you have installed Windows Vista again
But did you use Toshiba Recovery disk or the image of Toshiba for recovery?It seems really odd that all USB ports works Ok, if only one USP port would not work, it would be really strange but all!
It seems that you have already tried everything, what I might suggest; Chipset, bios update, new installation of the OS.
I have ideas and the only explanation for me is that the motherboard is affected
-
With the help of unity 4.0 (3) with Exchange 2000, with the standard conversation - according to the checklist, a subscriber should be able to 'Reply to all' press 4, then 2. However, this option never comes after listening to a group message. Missing something?
The option is not expressed in the menu - if you press 0 for help, I think it is listed in there, but it is not expressed in the higher level menu. If you hit 42 in the message after menu, however, he'll have an answer all as opposed to a response.
-
With the clause does not work in SqlPlus for DataBase 11 GR 8 1 material
I have 11 GR 1 database material, when I connect to my database through SqlPlus (version 8.0.6.0.0) this query
does not work. But when you use SqlPlus provided by 11g, this query works well. This query can run on an older version of SqlPlus?with x as (select * from areas) select * from x;
user12222356 wrote:
This client software is installed with Oracle developer 6i form. should I remove all the form developer? Latest version of the form developer is available for 11 GR 1 matter?Well, you have problems with the developer of forms?
I wouldn't recommend delete because you have problems with the SQL more customer that goes with it. I recommend to download the instant client and using them for your needs of sqlplus and leaving the rest products installed on your machine only.
-
The basket does not communicate with PayPal for shipping.
My client is using PayPal standard at the present time as the only option for a customer to pay for the product and shipping. The customer is charged for the products added to the cart, but is not charged for the shipping costs. PayPal said that the basket is not communicating with PayPal to load shipping. Any ideas? The site is http://www.frecksautoart.com/
Thank you
Magdalena
Hey there. Expedition to the France, you do not Paypal. Do you in British Colombia. On the confirmation page, should be shipping options which is empty, indicating that you have not set this up.
http://KB.worldsecuresystems.com/search/index.html?CX=014941776559396484648%3Aekxqgmgvzay& cof = DOOMED % 3 a 9% 3BNB % 3 a 1 & ie = UTF - 8 & q = shipping & bc-partner -
P4J10EA #2AN: new HP notebook: all the interface does not
There's a horrible problem with my laptop newly purchased HP laptop, model: 15-ac122nx of the UNITED Arab Emirates.
It comes with FreeDos already loaded. I removed and installed MS Windows 7-64 bits of a bootable DVD. It installed perfectly. But none of my interface works: USB, audio jack, etc. except this DVD player. Also, there is no start with a bootable USB key. It does, show USB bootable drive during the first boot menu pilots and shows deliver, don't install during the installation of the GUI for Windows 7 Installation menu and stop installation. So I was forced to start with DVD player.
When I run through the Device Manager and in the drop-down list other devices : all items with a yellow icon individually say... the drivers for this device is not installed (code 28). I also sent the screen capture what it looks like.
Please help me.
Still do not understand. If you have installed Windows 7 hard disk and the screen that we are seeing with the Windows 7 installation works from the hard drive or that you run it on a DVD as a live system?
You just need drivers if that is running from the hard disk. Your laptop is officially supported for Windows 7, and we should be able to find the drivers.
Use this link:
Don't forget the OS menu drop-down and select Windows 7. There's a full menu of Windows 7 drivers listed for your laptop.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
The email I'm reading is very large with a lot of things that I did not need to see. How can I make my mailbox smaller?
Remove the stuff that you don't need to see and to compact the folders later.
http://KB.mozillazine.org/Compacting_folders -
I built a new computer office in dec 08. AMD Athlon X 2 6000 + 4 GB OCZ DDR2 1066 (I know won't work to 800 due to the CPU), Foxconn A7DA mobo and an ATI HD4670 Gigabyte graphics card. Windows Vista 32 bit installed and I know that it will use only about 3 GB. Recently, my information system shows that I have 4 GB RAM installed but my total is only 1.46 GB. I tested each stick sperately and each watch 1.46 GB sticks. Something is to limit my ram and I can not understand what I just installed windows 7 (64-bit) on a different hard drive, and it shows 4 gb total. I have run several virus scans and found nothing. This could be the cause?
tjbrad04,
Have you recently installed an update to Vista service pack? There has been some changes to the way that Vista reports the system memory. These articles may help explain the discrepancy you see:http://support.Microsoft.com/kb/946003
http://support.Microsoft.com/kb/929605
http://support.Microsoft.com/kb/929580
http://support.Microsoft.com/kb/888137
Let us know if you need more assistance.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I checked the updates of plugins Firefox 24 and it showed that I needed to update Java and VLC media player even though I knew I had the latest versions. I ran FF update for both links and rebooted but still said that both need to update after a new
-
Keyboard Microsoft opens new copies of applications running
I just bought a Microsoft Wireless Optical Desktop 1000, which comes with the Intellitype software. When I type an electronic key (e.g. "mail"), it tries to open a new copy of the application. As my email client is already running, it refuses to open
-
Linksys E2000 can not find the device!
Hello I have Windows 7. My ISP is a DSL company. I've been with this company for several years now. I still have in my possession a wired router that I am currently using as my E2000 does not work. In my computer, I have a network and a wireless netw
-
Between the window update and Norton 360 first Edition.
Since March 29, 2011 what a life Windows updates KB2505189 and KB2524375 were auto installed on my Windows Vista laptop, my Norton 360 first Edition will not perform live updates. Is there a solution to this problem?
-
I get the message of IE9 is no longer supported
I have Vista and IE9 with service pack 2 and still receive a message every time I start up "Internet Explorer 9 is no longer supported and custom receive security udates. What can I do to stop the message?